DF005 PFS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

SINGLE-PHASE BRIDGE RECTIFIER DF005 THRU DF10 VOLTAGE RANGE 50 to 1000 Volts DB101 THRU DB107 CURRENT 1.0 Ampere

FEATURES

  • Glass passivated chip junction
  • High forward surge current capability
  • Ideal for printed circuit board
  • High temperature soldering guaranteed: 260℃/10 seconds at terminals MECHANICAL DATA
  • Case: Transfer molded plastic
  • Epoxy: UL94V-0 rate flame retardant
  • Terminals solderable per MIL-STD-202E method 208C
  • Polarity: Molded on body
  • Mounting position: Any
  • Weight: 0.04 ounce, 1.0 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
  • Ratings at 25℃ ambient temperature unless otherwise specified
  • Single Phase, half wave, 60Hz, resistive or inductive load
  • For capacitive load derate current by 20% SYMBOLS DF005 DB101 DF01 DB102 DF02 DB103 DF04 DB104 DF06 DB105 DF08 DB106 DF10 DB107 UNIT Maximum Reverse Peak Repetitive Voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 Volts Maximum Average Forward Rectified Output Current, 0.06”(1.5mm) lead length at TA=40℃ (Note 2) I(AV) 1.0 Amps Peak Forward Surge Current 8.3ms single half sine wave superimposed on rated load (JEDEC Method) IFSM 50 Amps Rating for Fusing (t＜8.3ms) I2t 10 A 2s Maximum Instantaneous Forward Voltage drop Per Bridge element 1.0A VF 1.1 Volts TA=25℃ 5 µAmps Maximum Reverse Current at rated DC blocking voltage per element TA=125℃ IR 0.5 mAmps Typical Junction Capacitance (Note 1) CJ 25 pF Typical Thermal Resistance (Note 2) RΘJA 40 ℃/W Operating and Storage Temperature Range TJ ,TSTG -55 to +150 ℃ Notes: 1. Measured at 1.0MHz and applied reverse voltage of 4.0 Volts. Dimensions in inches and (millimeters) DFM .245 (6.2) .255 (6.5) .195 (5.0) .205 (5.2) (0.5) .020 (1.5) .060 .300 (7.6) .350 (8.9) .155 (3.9) .165 (4.2) .115 (2.9) .135 (3.4) .320 (8.12) .365 (9.3) Web Site:WWW.PS-PFS.COM

SINGLE-PHASE BRIDGE RECTIFIER DF005 THRU DF10 VOLTAGE RANGE 50 to 1000 Volts DB101 THRU DB107 CURRENT 1.0 Ampere DB107 DF10 DB101 DF005RATINGS AND CHARACTERISTIC CURVES THRU 100 1000.1 101.0 100806040200 120 140 0.01 0.1 100 1.0 0.01 0.1 1.0 100101 2 4 68 20 40 60 80 0.2 0.4 0.6 0.8 1.2 1.0 1501251007550250 40 175 JUNCTION CAPACITANCE,(pF) μA INSTANTANEOUS REVERSE CURRENT, INSTANTANEOUS FORWARD CURRENT, A CURRENT, A PEAK FORWARD SURGE, CURRENT,(A) AVERAGE FORWARD OUTPUT, REVRESE VOLTAGE,(V) REVERSE VOLTAGE, (%) PERCENT OF RATED PEAK INSTANTANEOUS FORWARD VOLTAGE,(V) NUMBER OF CYCLES AT 60 HzAMBIENT TEMPERATURE, ℃ FIG. 5- TYPICAL JUNCTION CAPACITANCE PER BRIDGE ELEMENT FIG. 4- TYPICAL REVERSE CHARACTERISTICS PER BRIDGE ELEMENT PER BRIDGE ELEMENT FIG. 3- TYPICAL FORWORD CHARACTERISTICS FIG. 2- MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PER ELEMENTOUTPUT RECTIFIED CURRENT FIG. 1- DERATING CURVE FOR jT =25℃ f=1MHz Vsig=50mVp-p jT =25℃ T =125℃j

1 CYCLE

jT =25℃ PULSE WIDTH=300μs 1% DUTY CYCLE T =Tj j max Single Half Sine-Wave (JEDEC Method) Single Phase Half Wave 60Hz Resistive or Inductive Load Web Site:WWW.PS-PFS.COM