DF005 TGS | Alldatasheet
Document overview
- Manufacturer or author: wangshuang
- PDF pages: 2
Technical content
Features
- UL Recognized File # E-230084
- Ideal for printed circuit board
- Reliable low cost construction technique results in inexpensive product
- High temperature soldering guaranteed: 260℃ / 10 seconds / 0.375” ( 9.5mm ) lead length at 5 lbs., ( 2.3 kg ) tension Mechanical Data
- Case: Molded plastic
- Lead: solder plated
- Polarity: As marked Dimensions in inches and (millimeters) DB .350(8.9) .300(7.6) .045(1.14) .035(0.89) .185(4.69) .150(3.81) .255(6.5) .245(6.2) .315(8.0) .285(7.24) .205(5.2) .195(5.0) .335(8.51) .320(8.13) .130(3.30) .120(3.05) .023(0.58) .018(0.46) .08(2.03) .05(1.27) .075(1.90) .055(1.39) .013(0.33) .0088(0.22) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25℃ ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Type Number DF005 DF01 DF02 DF04 DF06 DF08 DF10 UNITS Maximum Repetitive Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V Maximum DC blocking Voltage VDC 50 100 200 400 600 800 1000 V Maximum Average Forward Rectified Current @TA = 40℃ I(AV) 1.0 A Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) IFSM 50 A Maximum Instantaneous Forward Voltage @ 1.0A VF 1.1 V Maximum DC Reverse Current @ TA=25℃ rated DC blocking voltage per leg TA = 125 ℃ IR 10 500 μA Typical Thermal Resistance (Note) RθJA RθJL 15 ℃/W Operating Temperature Range TJ -55 to +150 ℃ Storage Temperature Range TSTG -55 to +150 ℃ Pads. TIGER ELECTRONIC CO.,LTD
Page 2 of 2 h p://www.21yangjie.com RATING AND CHARACTERISTIC CURVES DF005 THRU DF10