DEVKIT-MPC5748G

DEVKIT-MPC5748G NXP | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 23

Technical content

Datasheet sections

Ultra-Reliable MCUs for Industrial and Automotive Applications www.nxp.com/DEVKIT-MPC5748G DEVKIT-MPC5748G QUICK START GUIDE (QSG)

Quick Start Package Overview Name Description Quick Start Guide(QSG) Detailed description on availability of Hardware, Software and Documents to quick start with MPC5748G project (this document) Software Integration Guide(SWIG) Detailed walk through on how to install and use S32 Design Studio IDE for Power Architecture Application Notes Detailed documents covering topics from ‘how to design hardware’ to ‘how to write software’ Fact Sheets, Reference Manuals and Data Sheets Detailed manuals for MPC5748G family of MCU and DEVKIT-MPC5748G board Name Description Integrated Development Environment (IDE) Eclipse based S32DS IDE with free GCC compiler and Debugger support DEVKIT-MPC5748G Quick Start Package All in one package: Software examples and supporting documents for getting started DEVKIT-MPC5748G Schematics PDF schematic files for the DEVKIT-MPC5748G board DEVKIT-MPC5748G PCB Design Package Gerber files and Bill of Material Downloads: Documents: Board: DEVKIT-MPC5748G Low cost EVB with MPC5748G(176 LQFP-EP) Auto quality MCU on board

DEVKIT-MPC5748G Board : Features

• MPC5748G has 2 x 160 MHz Power Architecture® e200Z4 Dual issue cores and 1 x 80 MHz Power Architecture® e200Z2 Single issue core
• MPC5748G qualified to AEC-Q100 Grade 1, ambient temperature of -40 to +125 °C and suitable for ASIL-B/SIL2 applications
• Arduino™ UNO R3 footprint-compatible with expansion “shield” support
• Integrated Open-standard Serial and Debug Adapter (OpenSDA) with support for several industry-standard debug interfaces as well as JTAG connector
• Easy access to the MCU I/O header pins for prototyping
• On-chip connectivity for Ethernet, FlexRay, USB, SDHC, CAN, LIN, UART/SCI and SPI
• MicroSD card slot for access to SDHC interface.
• Potentiometer for precise voltage and analog measurement
• 8 user LED
• 2 user push-button switches
• Flexible power supply options
• micro-B USB
• 12V External power supply
• Similar hardware across ARM®, S12 and Power Architecture® architecture based MCUs
• DEVKIT-COMM shield boards for extended 4 CAN and 6 LIN ports
• Box includes: − DEVKIT-MPC5748G Board − USB Cable
• Downloads includes: − Quick Start Package − S32 Design Studio IDE − Application notes

DEVKIT-MPC5748G Board : Revision D Update Improvements

• Latest MPC5748G silicon used (mask set 0N78S).
• Added MicroSD connector for SDHC access.
• MicroUSB connector replaced with full-size connector for easier use with USB devices.
• Alternative placement of JTAG header and power supply jumper for easier access when using shields.
• User LEDs: DS4 changed to red, and DS5 changed to orange.
• Added pre-soldered pull resistor on CAN0 interface which can be can be added or removed with J16.
• Shorter array of female pin headers, allowing for smaller form factor. Fixes
• Fixed issue with USB The release of DEVKIT-MPC5748G Revision D brought several changes and improvements to the development board:

Step-by-Step Installation Instructions Install Software and Tools Install S32 Design Studio IDE for Power Architecture. S32 Design Studio for Power See Software Installation Guide (SWIG) for detailed procedure Connect the USB Cable Connect one end of the USB cable to the PC and the other end to the micro-B connector on the DEVKIT-MPC5748G board. Allow the PC to automatically configure the USB drivers. Observe the Default Program reaction The pre-loaded example project utilizes the DEVKIT-MPC5748G user push button (SW2) and the user LEDs. Once the board is plugged in, LEDs will blink in default pattern. Press push button to switch between the two different patterns. Use Potentiometer to change blinking speed. (Clock is configured to PLL running at 160 MHz) Learn More About the DEVKIT-MPC5748G Read release notes and documentation on the nxp.com/DEVKIT-MPC5748G nxp.com/MPC5748G In this quick start guide, you will learn how to set up the DEVKIT-MPC5748G board and run the default program. J11 3 1 Jumper Setting: 2-3: USB powered 5V Supply, through OpenSDA interface

DEVKIT-MPC5748G Board Rev B : Overview The DEVKIT-MPC5748G is an ultra-low-cost development platform for MPC5748G Microcontrollers. Features include easy access to all MCU I/Os, a standard-based form factor compatible with the Arduino™ pin layout, providing a broad range of expansion board options, and a USB serial port interface for connection to the IDE. The board has option to be powered via USB or an external power supply. NXP Microcontroller MPC5748G (176 LQFP-EP) JTAG MPC5748G JTAG OpenSDA MCU User LEDs LIN Bus CAN Bus Ethernet FlexRay USB Potentiometer User Switch 2 User Switch 4 12V External Power Supply OpenSDA micro-USB J13 J14 J12 J3 J2 J4OpenSDA MCU Reset Button OpenSDA MCU Boot Entry Button

DEVKIT-MPC5748G Board Rev D : Overview The DEVKIT-MPC5748G is an ultra-low-cost development platform for MPC5748G Microcontrollers. Features include easy access to all MCU I/Os, a standard-based form factor compatible with the Arduino™ pin layout, providing a broad range of expansion board options, and a USB serial port interface for connection to the IDE. The board has option to be powered via USB or an external power supply. NXP Microcontroller MPC5748G (176 LQFP-EP) JTAG MPC5748G JTAG OpenSDA MCU User LEDs LIN Bus CAN Bus Ethernet FlexRay USB Potentiometer User Switch 2 User Switch 4 12V External Power Supply OpenSDA micro-USB J13 J14 J12 J3 J2 J4OpenSDA MCUReset Button OpenSDA MCU Boot Entry Button MicroSD card slot

DEVKIT-MPC5748G Board : Pinout 1 of 3 Arduino Compatibility The internal rows of the I/O headers on the DEVKIT-MPC5748G are arranged to fulfill Arduino™ shields compatibility . J2 FUNCTION PORT PIN PIN PORT FUNCTION PB15 J2-15 J2-16 PE13 Timer PB14 J2-13 J2-14 PF15 Timer PB13 J2-11 J2-12 PE11 PB12 J2-09 J2-10 PE10 Timer PB11 J2-07 J2-08 PE9 PB10 J2-05 J2-06 PE8 LIN4TX(UART) PA5 J2-03 J2-04 PE7 LIN4RX(UART) PA6 J2-01 J2-02 PE6 FUNCTION PORT PIN PIN PORT FUNCTION SCL1 PI1 J3-19 J3-20 PG9 SDA1 PI0 J3-17 J3-18 PG8 NC J3-15 J3-16 PG7 GND J3-13 J3-14 PG6 SCLK_4 PF2 J3-11 J3-12 PI7 SIN_4 PF1 J3-09 J3-10 PI6 SOUT_4 PF0 J3-07 J3-08 PA15 SS_4 PF3 J3-05 J3-06 PA14 Timer PA2 J3-03 J3-04 PA13 PA1 J3-01 J3-02 PA12

DEVKIT-MPC5748G Board : Pinout 1 of 3 Arduino Compatibility The internal rows of the I/O headers on the DEVKIT-MPC5748G are arranged to fulfill Arduino™ shields compatibility . J13 J14 FUNCTION PORT PIN PIN PORT FUNCTION PF11 J13-02 J13-01 VIN 12V PF10 J13-04 J13-03 PER_HVA PF6 J13-06 J13-05 RESET MPC5748G Reset PF4 J13-08 J13-07 3V3_SR 3.3V PF5 J13-10 J13-9 5V0_SR 5V PF7 J13-12 J13-11 GND PF8 J13-14 J13-13 GND PF9 J13-16 J13-15 VIN 12V FUNCTION PORT PIN PIN PORT FUNCTION PB4 J14-02 J14-01 PG13 ADC1_S[1] PB5 J14-04 J14-03 PG12 ADC1_S[2] PB6 J14-06 J14-05 PI8 ADC0_S[16] PB7 J14-08 J14-07 PI11 ADC0_S[19] PD0 J14-10 J14-9 PI12 ADC0_S[20] PD1 J14-12 J14-11 PI13 ADC0_S[21] PD2 J14-14 J14-13 PI14 ADC0_S[22] PD3 J14-16 J14-15 PI15 ADC0_S[23] J13 J14

DEVKIT-MPC5748G Board : Pinout 3 of 3 Arduino Compatibility The internal rows of the I/O headers on the DEVKIT-MPC5748G are arranged to fulfill Arduino™ shields compatibility . J12 FUNCTION PORT PIN PIN PORT FUNCTION PF12 J4-19 J4-20 PE5 PF13 J4-17 J4-18 PE4 PC6 J4-15 J4-16 PE0 PC7 J4-13 J4-14 PE1 PI2 J4-11 J4-12 GND PI3 J4-09 J4-10 PER_HVA PH3 J4-07 J4-08 PC11 PH4 J4-05 J4-06 PC10 PG3 J4-03 J4-04 PG5 PG2 J4-01 J4-02 PG4 FUNCTION PORT PIN PIN PORT FUNCTION PD12 J12-2 J12-1 PD15 PD10 J12-4 J12-3 PD14 PD9 J12-6 J12-5 PD13 PD8 J12-8 J12-7 PH8 PER_HVA J12-10 J12-9 PH7 GND J12-12 J12-11 PH6 PD7 J12-14 J12-13 PJ3 PD6 J12-16 J12-15 PJ2 PD5 J12-18 J12-17 PJ1 PD4 J12-20 J12-19 PJ0 J12

DEVKIT-MPC5748G Board : Jumper Settings J11 There is only one jumper: J11 It is to select Power source: 1-2: Default External 12 V Supply 2-3: USB powered 5V Supply, through OpenSDA interface 3 1 Note: For high power/current consuming applications (like using external shield boards) use “External 12 V Supply” only Rev D Rev B

DEVKIT-MPC5748G Board : Communication Interfaces 1 of 2 LIN CAN FlexRay LIN_0 DESCRIPTION NAME PIN GND P3-01 GND P3-02 Connect to 12V VBAT P3-03 Port PB2 & PB3 LIN P3-04 CAN_0 DESCRIPTION NAME PIN Port PB0 & PB1 CANH P5-01 CANL P5-02 NC P5-03 GND P5-04 FlexRay_A DESCRIPTION NAME PIN FRA-DATA-A P2_1 FRA-DATA-B P2_2 FlexRay_A DESCRIPTION PORT FR_A_TX PC5 FR_A_TX_EN PE2 FR_A_RX PE3 Note: LIN Physical Interface require 12V supply on pin P3-03 CAN termination resistor jumper: Open = No resistor Closed = 120Ohm (Rev D only)

DEVKIT-MPC5748G Board : Communication Interfaces 2 of 2 Ethernet USB ETHERNET_0 DESCRIPTION PORT RMII_0_TXD[0] PH1 RMII_0_TXD[1] PH0 RMII_0_TX_EN PH2 RMII_0_RXD[0] PA9 RMII_0_RXD[1] PA8 RMII_0_RX_ER PA11 RMII_0_RX_DV PF15 RMII_0_MDC PG0 RMII_0_MDIO PF14 RMII_0_TX_CLK (Reference clock) PG1 USB_1 DESCRIPTION PORT ULPI1_D7 PH12 ULPI1_D6 PH11 ULPI1_D5 PG11 ULPI1_D4 PG10 ULPI1_D3 PE15 ULPI1_D2 PE14 ULPI1_D1 PG15 ULPI1_D0 PG14 ULPI1_STP PI4 ULPI1_NXT PI5 ULPI1_DIR PC3 ULPI1_CLK PC2 UART UART_2 –LinFlex_2 OpenSDA micro-USB DESCRIPTION PORT TX PC8 RX PC9 SDHC SDHC DESCRIPTION PORT SDHC_DATA0 PI3 SDHC_DATA1 PI2 SDHC_DATA2 PI1 SDHC_DATA3 PI0 SDHC_CMD PE6 SDHC_CLK PE7 SDHC_CD PA1 SDHC_WP N/A for MicroSD

DEVKIT-MPC5748G Board : User Peripherals User Switch 2 DESCRIPTION PIN PORT Potentiometer (ADC0 CH9) RV1/POT PB4 User Switch 2 SW2 PE12 User Switch 4 SW4 PA3 User LEDs DS4 PA10 DS5 PA7 DS6 PH13 DS7 PC4 DS8 PH5 DS9 PJ4 DS10 PA0 DS11 PA4 Reset Button SW1 User Switch 4 PotentiometerUser LEDs Reset Button

DEVKIT-MPC5748G Board : Programing Interface OpenSDA Interface DESCRIPTION PIN OpenSDA MCU Boot Entry SW3 OpenSDA micro USB: On-board JTAG connection via open source OSBDM circuit using the MC9S08JM60 Microcontroller OpenSDA JTAG: JTAG to update firmware in OpenSDA MCU OpenSDA JTAG JTAG OpenSDA micro USB OpenSDA MCU Boot Entry Button JTAG DESCRIPTION PIN Support for USB Multilink Interface P4

Software Development Tools

• IDE & Compilers − Free S32 Design Studio IDE for Power Architecture with GCC compiler − GHS MULTI Integrated Development Environment − Cosmic IDE − iSystems winIDEA IDE − SourceryTM CodeBench Development Tools
• Debuggers − Free OpenSDA debugger on board and supported by S32DS IDE − P&E USB Multilink − iSystems iC6000 − Lauterbach TRACE32 JTAG Debugger

Pre-Compiled Code Examples

• Pre-compiled example projects are available in S32DS as well as on nxp.com/DEVKIT-MPC5748G for quick start
• Example projects also includes the projects from Application Note, AN4830: Qorivva Recipes for MPC574xG List of code examples: 1. Hello 2. Hello+pll 3. Hello+pll+interrupts 4. eDMA+ PBridge 5. Semaphores 6. Register Protection 7. Low Power: STOP mode 8. Analog-to-digital Converter 9. Timed I/O (eMIOS) 10. CAN 11. CAN+DMA 12. LIN 13. UART 14. SPI 15. SPI+DMA 16. I2C 17. Ethernet 18. Body Cross Trigger Unit (BCTU) 19. System Memory Protection Unit (SMPU) 20. Flash

• MPC5748G Microcontroller Data Sheet
• MPC5748G Microcontroller Reference Manual
• MPC5748G Microcontroller Fact Sheet
• DEVKIT-MPC5748G Board Fact Sheet
• Software Integration Guide (SWIG) Application Notes
• AN4830: Qorivva Recipes for MPC574xG
• AN5220: MPC5748G Hardware Design Guidelines
• AN5114: Migrating between MPC5748G and MPC5746C
• AN4868: EEPROM Emulation with NXP MPC55xx, MPC56xx, and MPC57xx Microcontrollers
• AN4805: A Practical Approach to Hardware Semaphores

MPC574xG/C/B/D Family : Phantom Feature Differences Flash/RAM Package 100MAPBGA (11x11mm, 1mm) 176LQFP-EP (24x24mm, 0.5mm) 256MAPBGA (17x17mm, 1mm) 324MAPBGA (19x19mm, 1mm) 6M/768k 6M/768k SPC5748G SPC5748C SPC5748G SPC5748C SPC5748G SPC5748C 4M/768k 4M/512k SPC5747G SPC5747C SPC5747G SPC5747C SPC5747G SPC5747C 3M/768k SPC5746G SPC5746G SPC5746G 3M/384k (512k optional) 3M/384k (512k optional) SPC5746C SPC5746B SPC5746C SPC5746B SPC5746C SPC5746B PPC5746C 2M/256k 2M/256k SPC5745C SPC5745B SPC5745C SPC5745B SPC5745C SPC5745B 1.5M/192k 1.5M/192k SPC5744C SPC5744B SPC5744C SPC5744B SPC5744C SPC5744B Color Coding: Triple Core, Ethernet, FlexRay, USB, SDHC, (optional HSM, 2nd Ethernet + switch) Dual Core, Ethernet, FlexRay (all: optional HSM, 5747C/5748C: 2nd Ethernet + switch) Single Core, FlexRay, Ethernet (optional HSM) Debug device for SPC5745B/C and SPC5746B/C - not for production

• OpenSDA is an open-standard serial and debug adapter
• It bridges serial and debug communications between a USB host and an embedded target processor
• DEVKIT-MPC5748G comes with the OpenSDA Application preinstalled
• Follow these instructions to run the OpenSDA Bootloader and update or change the installed OpenSDA Application Enter OpenSDA Bootloader Mode 1. Unplug the OpenSDA USB cable if attached 2. Press and hold the Reset button (SW3) 3. Plug in a USB cable between a USB host and the OpenSDA USB connector (labeled “SDA”) 4. Release the Reset button A removable drive should now be visible in the host file system with a volume label of BOOTLOADER. You are now in OpenSDA Bootloader mode. IMPORTANT NOTE: Follow the “Load an OpenSDA Application” instructions to update the application on your MK20DX128VFM5 to the latest version. It is likely that the version provided in this package is newer than what was preprogrammed on your MK20DX128VFM5. Load an OpenSDA Application 1. While in OpenSDA Bootloader mode, double-click SDA_INFO.HTML in the BOOTLOADER drive. A web browser will open the OpenSDA homepage containing the name and version of the installed Application. This information can also be read as text directly from SDA_INFO.HTML 3. Locate the OpenSDA Applications folder 4. Copy & paste or drag & drop the Application to the BOOTLOADER drive 5. Unplug the USB cable and plug it in again. The new OpenSDA Application should now be running and check the latest version by repeating Step -1 Use the same procedure to load other OpenSDA Applications.

Using the Virtual Serial Port 1. Determine the symbolic name assigned to the DEVKIT-MPC5748G virtual serial port. On Windows platform open Device Manager and loo k for the COM port named “OpenSDA-CDC Serial Port”. 2. Open the serial terminal emulation program of your choice. Examples for Windows platform include Tera Term, PuTTY, or HyperTerminal. 3. Program one of the “code examples” using S32 Design Studio IDE. 4. Configure the terminal emulation program. Most embedded examples use 8 data bits, no parity bits, and one stop bit (8 -N-1). Match the baud rate to the selected serial test application and open the port. 5. Press and release the Reset button (SW1) at anytime to restart the example application. Resetting the embedded application wi ll not affect the connection of the virtual serial port to the terminal program. NOTE: Refer to the OpenSDA User’s Guide for a description of a known Windows issue when disconnecting a virtual serial port while t he COM port is in use.

• For high power/current consuming applications (like using external shield boards) use “External 12 V Supply” only.
• External 12 V Supply Specifications − Fully regulated Switching Power Supply − Input Voltage: 100-240V AC 50/60Hz − Output: 12V 1A/2A DC − Plug size: 5.5mm x 2.1 mm, Center Positive
• By default “New Project” in S32 Design Studio IDE makes application to run at 16 MHz Internal RC (IRC) oscillator. For fasterperformance, configure PLL to desired frequency and switch clock source to PLL before executing application code.
• For faster debugging, debug from RAM, because this cuts down the lengthy Flash erase operation cycles. Follow the Software Integration Guide (SWIG) for details.
• Keep S32 Design Studio IDE and OpenSDA firmware Up-to-date for best results.
• Post Technical Questions on NXP community for MPC5xxx.
• Useful Links: − nxp.com/mpc5748g − nxp.com/devkit-mpc5748g − nxp.com/s32ds − nxp.com/community