DEVKIT-MEMS-001

DEVKIT-MEMS-001 CUI | Alldatasheet

Document overview

• Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 7

Technical content

MODEL: DEVKIT-MEMS-001 │ DESCRIPTION: MICROPHONE DEVELOPMENT KIT cuidevices.com

FEATURES

• 4 detachable evaluation boards
• 2 digital MEMS, one top port & one bottom port
• 2 analog MEMS, one top port & one bottom port
• plated through hole I/O terminals for multiple testing options EVAL BOARD circuit technology output acoustic size sensitivity current port (mm) typ (dB) typ (μA) CMM-2718AB-38308-TR MIC1 MEMS analog bottom 2.75 x 1.85 -38 80 CMM-2718AT-42308-TR MIC2 MEMS analog top 2.75 x 1.85 -42 80 CMM-4030DB-26354-TR MIC3 MEMS digital bottom 4.0 x 3.0 -26 540 CMM-4030DT-26354-TR MIC4 MEMS digital top 4.0 x 3.0 -26 540 OPERATIONAL INSTRUCTIONS The CUI Devices MEMS microphone evaluation board consists of four independent microphone evaluation circuits. Two of the microphones provide analog output signals and two of the microphones provide digital output signals. Top and bottom sound port options are provided for both the analog and the digital output microphones. External bypass capacitors are included on the power supply rails of the evaluation boards and DC blocking capacitors are placed in the analog output signal paths. A DC power supply of 1.6~3.6 Volts should be connected between the VDD and GND pins of the board to be evaluated. Please refer to the respective data sheets for proper connections to the remaining signal pins. Additional Resources: Product Page

date 04/06/2020 │ page 2 of 7CUI Devices │ MODEL: DEVKIT-MEMS-001 │ DESCRIPTION: MICROPHONE DEVELOPMENT KIT cuidevices.com CIRCUIT DIAGRAMS & BOARD LAYOUTS Vdd GND Out Vdd GND Out Vdd GND Data Sel Clock Vdd GND Data Sel Clock C52 C62 C82 C72 C51 C61 Vdd1 Vdd2 Vdd3 Vdd4 Out1 Out2 Out3 Out4 Clock3 Clock4 Sel3 Sel4 CMM-2718AB-38308-TR MIC1 CMM-4030DB-26354-TR MIC3 CMM-2718AT-42308-TR MIC2 CMM-4030DT-26354-TR MIC4 Additional Resources: Product Page

date 04/06/2020 │ page 3 of 7CUI Devices │ MODEL: DEVKIT-MEMS-001 │ DESCRIPTION: MICROPHONE DEVELOPMENT KIT cuidevices.com CMM-2718AB-38308-TR WWW.CUIDEVICES.COM/PRODUCT/AUDIO/MICROPHONES/MEMS-MICROPHONES/CMM-2718AB-38308-TR ELECTRICAL parameter conditions/description min typ max units directivity omnidirectional sensitivity (S) at 94 dB SPL, 1 kHz -41 -38 -35 dB supply voltage (VDD) 1.6 2.0 3.6 V current consumption (IDSS) VDD = 2.0 V 80 µA sensitivity reduction VDD = 3.6 ~ 1.6 V -0.5 dB frequency (f) 100 10,000 Hz signal to noise ratio (S/N) at 94 dB SPL, 1 kHz (A-weighted) 65 dBA total harmonic distortion (THD) at 94 dB SPL, 1 kHz 0.2 % acoustic overload point (AOP) at 10% THD, 1 kHz 130 dB SPL output impedance (Zout) at 1 kHz 300 Ω Notes: 1. All specifications measured at 23±2°C, humidity at 55±20%, unless otherwise noted. FREQUENCY RESPONSE CURVE Additional Resources: Product Page

date 04/06/2020 │ page 4 of 7CUI Devices │ MODEL: DEVKIT-MEMS-001 │ DESCRIPTION: MICROPHONE DEVELOPMENT KIT cuidevices.com CMM-2718AT-42308-TR WWW.CUIDEVICES.COM/PRODUCT/AUDIO/MICROPHONES/MEMS-MICROPHONES/CMM-2718AT-42308-TR ELECTRICAL parameter conditions/description min typ max units directivity omnidirectional sensitivity (S) at 94 dB SPL, 1 kHz -45 -42 -39 dB supply voltage (VDD) 1.6 2.0 3.6 V current consumption (IDSS) VDD = 2.0 V 80 µA sensitivity reduction VDD = 3.6 ~ 1.6 V -0.5 dB frequency (f) 100 10,000 Hz signal to noise ratio (S/N) at 94 dB SPL, 1 kHz (A-weighted) 60 dBA total harmonic distortion (THD) at 94 dB SPL, 1 kHz 0.2 % acoustic overload point (AOP) at 10% THD, 1 kHz 130 dB SPL output impedance (Zout) at 1 kHz 300 Ω Notes: 1. All specifications measured at 23±2°C, humidity at 55±20%, unless otherwise noted. FREQUENCY RESPONSE CURVE Additional Resources: Product Page

date 04/06/2020 │ page 5 of 7CUI Devices │ MODEL: DEVKIT-MEMS-001 │ DESCRIPTION: MICROPHONE DEVELOPMENT KIT cuidevices.com CMM-4030DB-26354-TR WWW.CUIDEVICES.COM/PRODUCT/AUDIO/MICROPHONES/MEMS-MICROPHONES/CMM-4030DB-26354-TR ELECTRICAL parameter conditions/description min typ max units directivity omnidirectional sensitivity (S) at 94 dB SPL, 1 kHz -29 -26 -23 dB FS supply voltage (VDD) 1.6 2.0 3.6 V current consumption (IDD) 0.54 mA sensitivity reduction VDD = 3.6 ~ 1.6 V -0.5 dB FS frequency (f) 100 10,000 Hz signal to noise ratio (S/N) at 94 dB SPL, 1 kHz (A-weighted) 64 dBA total harmonic distortion (THD) at 94 dB SPL, 1 kHz 0.2 % acoustic overload point (AOP) at 10% THD, 1 kHz 120 dB SPL output impedance (Zout) at 1 kHz 300 Ω power supply rejection (PSR) 100 mVp-p square wave at 217 Hz (A-weighted) -90 dB FS DIGITAL INTERFACE parameter conditions/description min typ max units sleep current (ISLEEP) FCLOCK < 1 kHz 3 4 µA fall-asleep time FCLOCK < 1 kHz 50 µs wake-up time FCLOCK ≥ 1 MHz 52 ms short circuit current (ISC) grounded data pin 1 10 mA output load (CLOAD) 100 pF data format 1-Bit PDM clock frequency (FCLOCK) 1.0 2.4 3.2 MHz clock duty cycle (FDC) 40 60 % clock rise time (tCR) 10 ns clock fall time (tCF) 10 ns logic input/output low (VIOL) IOUT = 1 mA -0.30 0.35xVDD V logig input/output high (VIOH) IOUT = 1 mA 0.65xVDD VDD+0.3 V delay time for valid data (tDV) 18 60 ns delay time for high z (tDH) 0 16 ns Notes: 1. All specifications measured at 23±2°C, humidity at 55±20%, VDD = 2.0 V, FCLOCK = 2.4 MHz, unless otherwise noted. FREQUENCY RESPONSE CURVE Additional Resources: Product Page

date 04/06/2020 │ page 6 of 7CUI Devices │ MODEL: DEVKIT-MEMS-001 │ DESCRIPTION: MICROPHONE DEVELOPMENT KIT cuidevices.com CMM-4030DT-26354-TR WWW.CUIDEVICES.COM/PRODUCT/AUDIO/MICROPHONES/MEMS-MICROPHONES/CMM-4030DT-26354-TR ELECTRICAL parameter conditions/description min typ max units directivity omnidirectional sensitivity (S) at 94 dB SPL, 1 kHz -29 -26 -23 dB FS supply voltage (VDD) 1.6 2.0 3.6 V current consumption (IDD) 0.54 mA sensitivity reduction VDD = 3.6 ~ 1.6 V -0.5 dB FS frequency (f) 100 10,000 Hz signal to noise ratio (S/N) at 94 dB SPL, 1 kHz (A-weighted) 65 dBA total harmonic distortion (THD) at 94 dB SPL, 1 kHz 0.2 % acoustic overload point (AOP) at 10% THD, 1 kHz 120 dB SPL output impedance (Zout) at 1 kHz 300 Ω power supply rejection (PSR) 100 mVp-p square wave at 217 Hz (A-weighted) -90 dB FS DIGITAL INTERFACE parameter conditions/description min typ max units sleep current (ISLEEP) FCLOCK < 1 kHz 3 4 µA fall-asleep time FCLOCK < 1 kHz 50 µs wake-up time FCLOCK ≥ 1 MHz 52 ms short circuit current (ISC) grounded data pin 1 10 mA output load (CLOAD) 100 pF data format 1-Bit PDM clock frequency (FCLOCK) 1.0 2.4 3.2 MHz clock duty cycle (FDC) 40 60 % clock rise time (tCR) 10 ns clock fall time (tCF) 10 ns logic input/output low (VIOL) IOUT = 1 mA -0.30 0.35xVDD V logig input/output high (VIOH) IOUT = 1 mA 0.65xVDD VDD+0.3 V delay time for valid data (tDV) 18 60 ns delay time for high z (tDH) 0 16 ns Notes: 1. All specifications measured at 23±2°C, humidity at 55±20%, VDD = 2.0 V, FCLOCK = 2.4 MHz, unless otherwise noted. FREQUENCY RESPONSE CURVE Additional Resources: Product Page

date 04/06/2020 │ page 7 of 7CUI Devices │ MODEL: DEVKIT-MEMS-001 │ DESCRIPTION: MICROPHONE DEVELOPMENT KIT cuidevices.com CUI Devices offers a one (1) year limited warranty. Complete warranty information is listed on our website. CUI Devices reserves the right to make changes to the product at any time without notice. Information provided by CUI Devices is believed to be accurate and reliable. However, no responsibility is assumed by CUI Devices for its use, nor for any infringements of patents or other rights of third parties which may result from its use. CUI Devices products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. rev. description date 1.0 initial release 05/14/2019 1.01 brand update 04/06/2020 The revision history provided is for informational purposes only and is believed to be accurate.

REVISION HISTORY

Additional Resources: Product Page