DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 19
Technical content
Features
Single +3V or + 5V supply High linearity Low noise fi gure Miniature SOT363 (SC70) package Unconditionally stable Lead-free option available Specifi cations at 2 GHz; 3V, 41 mA (Typ.) 28.5 dBm OIP3 1.2 dB noise fi gure 16.6 dB gain 15.8 dBm P1dB Package Diagram Note: Package marking provides orientation and identifi cation: “6A” = Device Code “x” = Date code indicates the month of manufacture. OUTPUT and Vd GND 6AxGND GND INPUT
4 BIAS
Attention: Observe precautions for handling electrostatic sensitive devices. ESD Machine Model (Class A) ESD Human Body Model (Class 0) Refer to Avago Technologies Application Note A004R: Electrostatic Discharge Damage and Control.
- Operation of this device in excess of any one of these parameters may cause permanent damage.
- Assumes DC quiescent conditions.
- With the DC (typical bias) and RF applied to the device at board temperature T
- Thermal resistance measured using 150°C Liquid Crystal Measurement method.
Figure 1. Test circuit of the 2 GHz production test board used for NF , Gain and OIP3 measure- ments. This circuit achieves a trade-off between optimal NF , Gain, OIP3 and input return loss. Circuit losses have been de-embedded from actual measurements.
Rbias = 620ohm TC = 25°C, ZO = 50Ω, Vd = 3V (unless otherwise specifi ed) Symbol Parameters and Test Conditions Freq Units Min. Typ. Max. Std Dev Id[1,2] Device Current mA 32 41 48 0.91 NFtest [1,2] Noise Figure in test circuit [1] f = 2.047 GHz dB 1.17 1.8 0.03 Gtest [1,2] Associated Gain in test circuit [1] f = 2.047 GHz dB 15 16.6 18 0.36 OIP3test [1,2] Ouput 3 rd Order Intercept in test circuit[1] f = 2 GHz dBm 26 28.5 0.5 NF50Ω [3] Noise Figure in 50Ω system f = 0.2 GHz dB 1.4 f = 0.5 GHz 1.1 f = 1.0 GHz 0.9 f = 2.0 GHz 1.0 0.03 f = 3.0 GHz 1.4 f = 4.0 GHz 1.8 f = 5.0 GHz 2.3 f = 6.0 GHz 2.7 21|2 [3] Associated Gain in 50Ω system f = 0.2 GHz dB 21 f = 0.5 GHz 20 f = 1.0 GHz 19.3 f = 2.0 GHz 15.5 0.36 f = 3.0 GHz 12.4 f = 4.0 GHz 10.4 f = 5.0 GHz 8 f = 6.0 GHz 6.9 OIP3 50Ω [3] Output 3 rd Order Intercept Point in 50Ω system f = 0.2 GHz dBm 29 f = 0.5 GHz 29.8 f = 1.0 GHz 30.5 f = 2.0 GHz 31.7 0.5 f = 3.0 GHz 30.9 f = 4.0 GHz 30.6 f = 5.0 GHz 30.6 f = 6.0 GHz 30.7 P1dB 50Ω [3] Output Power at 1dB Gain Compression in 50Ω system f = 0.2 GHz dBm 15.6 f = 0.5 GHz 15.5 f = 1.0 GHz 15.4 f = 2.0 GHz 15.1 f = 3.0 GHz 15.1 f = 4.0 GHz 14.8 f = 5.0 GHz 14.6 f = 6.0 GHz 14.6 Notes: 1. Guaranteed specifi cations are 100% tested in the production test circuit as shown in Figure 1, the typical value is based on measurement of at least 500 parts from three non-consecutive wafer lots during initial characterization of this product. 2. Circuit achieved a trade-off between optimal NF, Gain, OIP3 and input return loss. 3. Parameter quoted at 50Ω is based on measurement of selected typical parts tested on a 50Ω input and output test fi xture.
Figure 32. MAG vs. Frequency.
Figure 33. MAG vs. Frequency.
Figure 34. MAG vs. Frequency.
Figure 35. MAG vs. Frequency.
Figure 36. MAG vs. Frequency.
Figure 37. MAG vs. Frequency.
SOT-363/SC-70 (JEDEC DFP-N) Package Dimensions
Ordering Information
Part Number No. of Devices Container MGA-61563-TR1G 3000 7" Reel MGA-61563-TR2G 10000 13" Reel MGA-61563-BLKG 100 antistatic bag Device Models Refer to Avago Technologies Web Site : www.avagotech.com/view/rf. Refer to Avago Technologies Web Site for S-parameters at diff erent biases: www.avagotech.com Dimensions Symbol Min (mm) Max (mm) E 1.15 1.35 D 1.80 2.25 HE 1.80 2.40 A 0.80 1.10 A2 0.80 1.00 A1 0.00 0.10 e 0.650 BCS 0.650 BCS b 0.15 0.30 c 0.10 0.20 L 0.10 0.30
Recommended PCB Pad Layout for Agilent's SC70 6L/SOT-363 Products Device Orientation (dimensions in inches) END VIEW 8 mm 4 mm TOP VIEW (Package marking example orientation shown.) 6Ax 6Ax 6Ax 6Ax USER FEED DIRECTION COVER TAPE CARRIER TAPE REEL
For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright © 2005-2011 Avago Technologies. All rights reserved. Obsoletes 5989-1811EN AV02-1471EN - August 5, 2011 P F W C D E 10¡ MAX. t1 (CARRIER TAPE THICKNESS) Tt (COVER TAPE THICKNESS) 10¡ MAX. MGA-81563 Tape Dimensions DESCRIPTION SYMBOL SIZE (mm) SIZE (INCHES) LENGTH WIDTH DEPTH PITCH BOTTOM HOLE DIAMETER A P 2.40 ± 0.10 2.40 ± 0.10 1.20 ± 0.10 4.00 ± 0.10 1.00 + 0.25 0.094 ± 0.004 0.094 ± 0.004 0.047 ± 0.004 0.157 ± 0.004 0.039 + 0.010 CAVITY DIAMETER PITCH POSITION D P E 1.50 ± 0.10 4.00 ± 0.10 1.75 ± 0.10 0.061 ± 0.002 0.157 ± 0.004 0.069 ± 0.004 PERFORATION WIDTH THICKNESS W 8.00±0.30-0.10 0.254 ± 0.02 0.315 ± 0.012 0.010 ± 0.0005 CARRIER TAPE CAVITY TO PERFORATION (WIDTH DIRECTION) CAVITY TO PERFORATION (LENGTH DIRECTION) F 3.50 ± 0.05 2.00 ± 0.05 0.138 ± 0.002 0.079 ± 0.002 DISTANCE WIDTH TAPE THICKNESS C Tt 5.40 ± 0.10 0.062 ± 0.001 0.205 ± 0.004 0.0025 ± 0.00004 COVER TAPE MGA-81563 Tape Dimensions chart