DEL-LAT-17-361-1

B-361B BRADY | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 2

Technical content

BRADY B-361B CLEAR POLYESTER FILM TAPE TDS No. B-361B Effective Date: 16-Jul-2008 Description: GENERAL Print Technology: Laser Material Type: Clear polyester Finish: Clear film with matte white printable zone coated ink Adhesive: Permanent acrylic

APPLICATIONS

WIre and cable identification REGULATORY Brady B-361 is RoHS compliant to 2005/618/EC MCV amendment to RoHS Directive 2002/95/EC. SPECIAL FEATURES Brady B-361B is used in a self-laminating format which has a white printable or write-on zone and a translucent overlaminating area. Brady B-361B has good print smudge resistance, solvent resistance, and elevated temperature performance. Details: The following testing is performed with the B-361B self-laminates printed with laser printer . Samples wrapped around 0.080" OD TFE jacketed wires and 0.250" OD MTW wires. Unprinted samples also applied to flat aluminum panels. All samples allowed to dwell 24 hours prior to testing. B-361B self-laminate samples were printed with laser printer. Samples wrapped around 0.080" OD TFE jacketed wires and 0.250" OD MTW wires and dwelled 24 hours prior to test. Unprinted samples also applied to flat aluminum panels. Testing consisted of 5 cycles of 10 minute immersions in the specified chemicals followed by 30 minute recovery periods. Testing was conducted at room temperature. PHYSICAL PROPERTIES TEST METHODS AVERAGE RESULTS Thickness ASTM D 1000 -Substrate -Adhesive -Total 0.0010 inch (0.025 mm) 0.0010 inch (0.025 mm) 0.0020 inch (0.050 mm) Adhesion to: -Stainless Steel -Textured ABS -Polypropylene ASTM D 1000 20 minute dwell 24 hour dwell 20 minute dwell 24 hour dwell 20 minute dwell 24 hour dwell 34 oz/in (37 N/100 mm) 38 oz/in (42 N/100 mm) 9 oz/in (10 N/100 mm) 9 oz/in (10 N/100 mm) 16 oz/in (18 N/100 mm) 16 oz/in (18 N/100 mm) Tack ASTM D 2979 Polyken™ Probe Tack 1 second dwell 16 oz (450 g) Tensile Strength and Elongation ASTM D 1000 -Machine Direction 17 lbs/in (298 N/100 mm), 50% Application Temperature Lowest application temperature to stainless steel 50°F (4°C) PERFORMANCE PROPERTIES TEST METHODS TYPICAL RESULTS High Service Temperature 30 days at 230°F (110°C) Slight discoloration at 110°C; no visible effect to laser print. Material discolored but functional up to 130°C. Low Service Temperature 30 days at -94°F (-70°C) No visible effect Humidity Resistance 30 days at 100°F (37°C), 95% R. H. No visible effect UV Light Resistance 30 days in UV Sunlighter™ 100 No visible effect Weatherability ASTM G155, Cycle 1 30 days in Xenon Arc Weatherometer No visible effect Salt Fog Resistance ASTM B 117 30 days in 5% salt fog solution chamber No visible effect PERFORMANCE PROPERTY SOLVENT RESISTANCE

Laser printing legible in all test fluids. Product testing, customer feedback, and history of similar products, support a customerperformance expectation of at leasttwo years from the date of receipt for this product as long as this product is stored in its original packaging in an environment below 80 degrees F (27 degrees C) and 60% RH . We are confident that our product will perform well beyond this time frame. However, it remains the responsibility of the user to assess the risk of using such product. We encourage customers to develop functional testing protocols that will qualify a product's fitness for use, in their actual applications. CHEMICAL REAGENT SUBJECTIVE OBSERVATION OF VISUAL CHANGE APPEARANCE OF MARKER ON 0.080" OD WIRE APPEARANCE OF MARKER ON 0.250" OD WIRE APPEARANCE OF FLAT LABEL ON ALUMINUM PANEL Methyl Ethyl Ketone Severe unwrap Slight unwrap Slight adhesive ooze 1,1,1-Trichloroethane Slight unwrap No visible effect Slight adhesive ooze Isopropyl Alcohol Slight unwrap No visible effect No visible effect Mineral Spirits No visible effect No visible effect No visible effect JP-4 Jet Fuel Slight unwrap No visible effect No visible effect JP-8 Jet Fuel Slight unwrap</ font> No visible effect No visible effect SAE 20 WT Oil No visible effect No visible effect No visible effect Mil 5606 Oil No visible effect No visible effect No visible effect Speedi Kut Cutting Oil 332 No visible effect No visible effect No visible effect Gasoline Slight unwrap Slight unwrap Slight adhesive ooze Rust Veto® 377 No visible effect No visible effect No visible effect Skydrol® 500B-4 Slight unwrap No visible effect Slight adhesive ooze Super Agitene® No visible effect No visible effect No visible effect Deionized Water No visible effect No visible effect No visible effect 3% Alconox® Detergent No visible effect No visible effect No visible effect Trademarks: Alconox® is a registered trademark of Alconox Co. Polyken™ is a trademark of Testing Machines Inc. Rust Veto® is a registered trademark of the E.F. Houghton & Co. Skydrol® is a registered trademark of the Monsanto Company Sunlighter™ is a trademark of the Test Lab Apparatus Company Super Agitene® is a registered trademark of Graymills Corporation ASTM: American Society for Testing and Materials (U.S.A.) SAE: Society of Automotive Engineers (U.S.A.) All S.I. Units (metric) are mathematically derived from U.S. conventional units. Note: All values shown are averages and should not be used for specification purposes. Test data and test results contained in this document are for general information only and shall not be relied upon by Brady customers for designs and specifications, or be relied on as meeting specified performance criteria. Customers desiring to develop specifications or performance criteria for specific product applications should contact Brady for further information. Product compliance information is based upon information provided by suppliers of the raw materials used by Brady to manufacture this product or based on results of testing using recognized analytical methods performed by a third party, independent laboratory. As such, Brady makes no independent representations or warranties, express or implied, and assumes no liability in connection with the use of this information. WARRANTY Brady products are sold with the understanding that the buyers will test them in actual use and determine for themselves their adaptability to their intended uses. Brady warrants to the buyers that its products are free from defects in material and workmanship, but limits its obligation under this warranty to replacement of the product shown to Brady's satisfaction to have been defective at the time Brady sold it. This warranty does not extend to any persons obtaining the product from the buyers. This warranty is in lieu of any other warranty, express or implied, including, but not limited to, any implied warranty of merchantability or fitness for a particular purpose, and of any other obligations or liability on Brady's part. Under no circumstances will Brady be liable for any loss, damage, expense, or consequential damages of any kind arising in connection with the use, or inability to use, Brady's products. Copyright 2015 Brady Worldwide, Inc. | All Rights Reserved Material may not be reproduced or distributed in any form without written permission. Brady North America | 6555 W. Good Hope Rd | Milwaukee, WI 53223 | USA | Tel: 414-358-6600 | Fax: 800-292-2289