DEL-E65-SMPR3-HLD

E65-SMTS15-HA EATON | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 2

Technical content

T est the Best Photoelectric Sensors: SM Series If a sensor on your machine goes down, it can take your line with it. But what if there was a sensor smart enough to notify you of failure before it happens? The SM Series, with TargetLock™ marginal gain indi- cation, does just that. As the sensor detects that its optical power is diminishing—either due to contamination or misalign- ment—the TargetLock indicator warns of an impending failure. The intelligence of TargetLock, combined with best-in-class sensing power, make the SM Series a compact photoelectric sensor you can depend on, day in and day out. The SM Series redefines optical performance among compact photoeyes. When compared to the competi- tion, Eaton sensors operate more releably in the pres- ence of dust, humidity and debris. Higher reliability means less downtime, less maintenance, and more money in your pocket. SM Series Sensor Understanding the Benefi ts of Excess Gain Excess gain is a measurement of how much sensing power a photoelectric sensor has avail- able beyond the power required to detect an object. An excess gain of 1 .00 at a given range means there is just enough sensing power to detect an object under perfect conditions. In the real world, there is con- tamination—dust, dirt, oils, and debris—that can settle in the air or the lens and reduce light transmission. As the level of contamination gets worse, more excess gain is needed to push through contamination in the environment. The SM Series provides the highest excess gain in its operat- ing class. In the chart below, the SM Series is compared to com- petitive units in its class. The SM Series exhibits superior excess gain. This means that in equal environments, with equal levels of contamination, the SM Series will perform more reliably over time, with less false trips. T argetLock: T aking the Guesswork Out of Alignment The performance of a sensor matters little if its misaligned in the first place. Even if you’ve never touched a sensor before, TargetLock helps you setup with the speed and accuracy of an expert. Throughout the alignment pro- cess, an internal microprocessor constantly measures the signal strength received, and commu- nicates this through an orange LED on the top of the unit. This LED changes from off, to short flash, to long flash, to solid-on as you approach optimum align- ment with the reflector. It acts in a similar fashion with diffuse sensors to help you position the target at the optimum range for its size and reflectivity. Optimizing performance pro- vides a larger buffer against reliability problems due to dirty lenses or misalignment that can occur with impact or vibra- tion over time. When problems occur, TargetLock alerts you to necessary maintenance—before your machine goes down. T est the Best Want to learn more about the E58 Series or the rest of Eaton’s line of rugged sensors? Visit us online and complete the Test the Best form. We’re so confi dent in our sensors, we’re willing to let you try one out—absolutely free. Learn more at: www.eaton.com/sensors 1 011.0 Range (feet) Range (m) 0.3 0 9.1.330.0 Note: Competitive performance information obtained from publicly available literature. Models compared: Eaton E65-SMPR3-HL; Banner QS18VN6LP; A-B 42EF-P2MPB-A2; SICK EL3-N2415. Compact, with industry-standard 18mm threaded barrel mounting. Photoelectric sensors

provides the highest optical per- formance found in the compact photoelectric sensor class. The included TargetLock technology visually confirms the sensor is positioned to operate with the highest possible reliability and also provides diagnostic informa- tion during use to inform you of impending problems, before they result in equipment down- time. Beyond TargetLock, the SM Series includes a number of features that simplify use. Visible sensing beams on all models show you exactly where the sensor is pointing. The durable housing features multiple mount- ing options to easily fit on your equipment, even in the tightest spaces. Bright LED status indi- cators are visible from all angles. Comprehensive electrical pro- tections—overvoltage, reverse polarity, short circuit—reduce the change of damage.

Features

 Highly visible LED indica- tors for power, output and TargetLock  TargetLock simplifies setup and ensures optimum sensor performance  Full family includes thru-beam, polarized reflex, diffuse and Perfect Prox® models  Available Perfect Prox models sense different colored targets at the same range, ignoring background objects  Available in AC/DC (18-264V AC, 18-50V DC) or DC-only (10-30V DC)  Visible red sensing beams on all models  Compact size to fit into tight spaces  Multiple mounting options including industry-standard 18mm threads  C-UL Listed, CE Approved Wiring Diagrams Operating Voltage Cable Models Micro Connector Models 4-Wire Sensors 10-30V DC /L55476 BU WH BK BN L1 or (-) L2 or No ConnectionLoad L2 or +V or (-)Load No Connection /L55476 This family is also available in A C/DC (18-264V AC, 18-50V DC) configuration. For a complete model selection table, see the Sensing Solutions Catalog (CA08100010E) available online at www.eaton.com/sensors and orderable from Eaton’s Literature Fulfillment Center at 800-957-7050. Dimensions Approximate dimensions in inches (mm). 1.70 (43 ) 0.8 3 (21) 0.75 (19) ø 0.16 (4) 2 places 1.51 (38 ) 1.02 (26) M18 x 1.0 Connector Models 0.41 (10) Cable Models 0.3 5 (9) 1.47 (37) 1.05 (27)0.58 (15) 0.10 (2.5) 1.6 3 (41) AC/DC Models Only 1.29 (3 3) 2.17 (55) Model Selection T able SM Series Sensing Range Optimum Range Cutoff Range /L55473 Field of View Thru-Beam Component Catalog Number Light Operate Dark Operate Thru-Beam, 10-30 VDC Models with 2m Cable /L55475 50 ft. (15m) 0.1-25 ft. (30mm-7.5m) — 10 in. @ 10 ft. (254mm @ 3m) Source E65-SMTS15-HA E65-SMTS15-HA Detector E65-SMTD15-HL E65-SMTD15-HD Polarized Reflex, 10-30 VDC Models /L55474 with 2m Cable /L55475 10 ft. (3m) 0.1-5 ft. (30mm-1.5m) — 1 in. @ 50 in. (25mm @ 1.3m) — E65-SMPR3-HL E65-SMPR3-HD Diffuse Reflective, 10-30 VDC Models /L55474 with 2m Cable /L55475 8 in. (200mm) 0.25-5 in. (6-127mm) — 2 in. @ 5 in. (50mm @ 127mm) — E65-SMSD200-HL E65-SMSD200-HD Perfect Prox® Background Rejection, 10-30 VDC Models /L55474 with 2m Cable /L55475 2 in. (50mm) 0.4-1.8 in. (10-45mm) 2.3 in. (58mm) (6mm @ 57mm) — E65-SMPP050-HL E65-SMPP050-HD 4 in. (100mm) 0.5-3.0 in. (13-76mm) 5.0 in. (127mm) 0.35 in. @ 5.0 in. (9mm @ 127mm) — E65-SMPP10-HL E65-SMPP100-HD /L50179 Sensor will ignore a 90% reflectance white card at—and beyond—this range. /L50183 This family is also available in A C/DC (18-264V AC, 18-50V DC) configuration. To specify an AC/DC model, simply substitute the H in the model num- ber with a G (for example, E65-SMPR3-HL would become E65-SMPR3-GL). For a complete model selection table, see the Sensing Solut ions Catalog (CA08100010E) available online at www.eaton.com/sensors and orderable from Eaton’s Literature Fulfillment Center at 800-957-7050. /L50187 This family is also available with 4-pin micro connectors. To specify an micro connector model, simply add a D to the end of th e model number (for exam- ple, E65-SMPR3-HL would become E65-SMPR3-HLD). For a complete model selection table, see the Sensing Solutions Catalog (CA08100010E) available online at www.eaton.com/sensors and orderable from Eaton’s Literature Fulfillment Center at 800-957-7050. Mounting The SM Series features two mounting holes in the rectan- gular section of the body for mounting to a surface with #6 or smaller hardware. The threaded barrel and jam nut allow mount- ing into any 0.75 in. (19mm) hole. Additionally, a selection of accessory mounting brackets are available from Eaton (see Sensing Solutions Catalog for full model selection). Mounting Sensor Using #6 Hardware Mounting Sensor Using Jam Nut Eaton Corporation Electrical Sector 1111 Superior Ave. Cleveland, OH 44114 United States 877-ETN-CARE (877-386-2273) Eaton.com © 2011 Eaton Corporation All Rights Reserved Printed in USA Publication No. PA05305004E / RG August 2011 Eaton is a registered trademark of Eaton Corporation. All other trademarks are property of their respective owners.