DEL-1N5388BG

1N5333B ONSEMI | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 8

Technical content

Features

• Zener V oltage Range − 3.3 V to 200 V
• ESD Rating of Class 3 (>16 kV) per Human Body Model
• Surge Rating of up to 180 W @ 8.3 ms
• Maximum Limits Guaranteed on up to Six Electrical Parameters
• These devices are manufactured with a Pb−Free external lead finish only* Mechanical Characteristics CASE: V oid free, transfer−molded, thermosetting plastic FINISH: All external surfaces are corrosion resistant and leads are readily solderable MAXIMUM LEAD TEMPERATURE FOR SOLDERING PURPOSES: 230°C, 1/16 in. from the case for 10 seconds POLARITY: Cathode indicated by polarity band MOUNTING POSITION: Any MAXIMUM RATINGS Rating Symbol Value Unit Max. Steady State Power Dissipation @ T L = 75°C, Lead Length = 3/8 in Derate above 75°C PD 5 W mW/ °C Operating and Storage Temperature Range TJ, Tstg −65 to +200 Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. Device Package Shipping †

ORDERING INFORMATION

1N53xxB Axial Lead 1000 Units/Box 1N53xxBRL Axial Lead AXIAL LEAD CASE 17 PLASTIC 4000/Tape & Reel Cathode Anode L 53xxB YWW L = Assembly Location 1N53xxB = Device Code = (See Table Next Page) Y = Year WW = Work Week MARKING DIAGRAM 1N53xxBTA* Axial Lead 2000/Ammo Pack Preferred devices are recommended choices for future use and best overall value. *1N5361B Not Available in 2000/Ammo Pack †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. http://onsemi.com

V I IR IZT VRVZ VF 1N5333B Series http://onsemi.com ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted, VF = 1.2 V Max @ IF = 1.0 A for all types) Symbol Parameter VZ Reverse Zener Voltage @ IZT IZT Reverse Current ZZT Maximum Zener Impedance @ IZT IZK Reverse Current ZZK Maximum Zener Impedance @ IZK IR Reverse Leakage Current @ VR VR Breakdown Voltage IF Forward Current VF Forward Voltage @ IF IR Maximum Surge Current @ TA = 25°C VZ Reverse Zener Voltage Change IZM Maximum DC Zener Current

http://onsemi.com ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted, VF = 1.2 V Max @ IF = 1.0 A for all types) Zener Voltage (Note 2) Zener Impedance (Note 2) Leakage Current IR VZ IZM Device Device VZ (Volts) @ IZT ZZT @ IZT ZZK @ IZK IZK IR @ VR IR (Note 3) VZ (Note 4) IZM (Note 5)D evice (Note 1) D evice Marking Min Nom Max mA mA A Max Volts A Volts mA 1N5333B 1N5333B 3.14 3.3 3.47 380 3 400 1 300 1 20 0.85 1440 1N5357B 1N5357B 19 20 21 65 3 75 1 0.5 15.2 5.1 0.4 237 Devices listed in bold, italic are ON Semiconductor Preferred devices. Preferred devices are recommended choices for future use and best overall value. 1. TOLERANCE AND TYPE NUMBER DESIGNATION The JEDEC type numbers shown indicate a tolerance of ±5%. 2. ZENER VOLTAGE (V Z) and IMPEDANCE (IZT and IZK ) Test conditions for zener voltage and impedance are as follows: IZ is applied 40 ±10 ms prior to reading. Mounting contacts are located 3/8″ to 1/2″ from the inside edge of mounting clips to the body of the diode (TA = 25°C +8°C, −2°C). 3. SURGE CURRENT (I R ) Surge current is specified as the maximum allowable peak, non−recurrent square−wave current with a pulse width, PW, of 8.3 ms. The data given in Figure 5 may be used to find the maximum surge current for a square wave of any pulse width between 1 ms and 1000 ms by plotting the applicable points on logarithmic paper. Examples of this, using the 3.3 V and 200 V zener are shown in Figure 6. Mounting contact located as specified in Note 2 (TA = 25°C +8°C, −2°C). 4. VOLTAGE REGULATION ( VZ) The conditions for voltage regulation are as follows: VZ measurements are made at 10% and then at 50% of the IZ max value listed in the electrical characteristics table. The test current time duration for each VZ measurement is 40 ±10 ms. Mounting contact located as specified in Note 2 (TA = 25°C +8°C, −2°C). 5. MAXIMUM REGULATOR CURRENT (I ZM ) The maximum current shown is based on the maximum voltage of a 5% type unit, therefore, it applies only to the B−suffix device. The actual IZM for any device may not exceed the value of 5 watts divided by the actual VZ of the device. TL = 75°C at 3/8″ maximum from the device body. *Not Available in the 2000/Ammo Pack.

http://onsemi.com ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted, VF = 1.2 V Max @ IF = 1.0 A for all types) Zener Voltage (Note 7) Zener Impedance (Note 7) Leakage Current IR VZ IZM Device Device VZ (Volts) @ IZT ZZT @ IZT ZZK @ IZK IZK IR @ VR IR (Note 8) VZ (Note 9) IZM (Note 10)D evice (Note 6) D evice Marking Min Nom Max mA mA A Max Volts A Volts mA 1N5371B 1N5371B 57 60 63 20 40 350 1 0.5 45.5 2.2 1.2 79 1N5378B 1N5378B 95 100 105 12 90 800 1 0.5 76 1.5 2.5 47.5 1N5382B 1N5382B 133 140 147 8 230 1500 1 0.5 106 1.2 2.5 34 1N5384B 1N5384B 152 160 168 8 350 1650 1 0.5 122 1.1 3.0 29.4 1N5386B 1N5386B 171 180 189 5 430 1750 1 0.5 137 1.0 4.0 26.4 1N5388B 1N5388B 190 200 210 5 480 1850 1 0.5 152 0.9 5.0 23.6 Devices listed in bold, italic are ON Semiconductor Preferred devices. Preferred devices are recommended choices for future use and best overall value. 6. TOLERANCE AND TYPE NUMBER DESIGNATION The JEDEC type numbers shown indicate a tolerance of ±5%. 7. ZENER VOLTAGE (V Z) and IMPEDANCE (IZT and IZK ) Test conditions for zener voltage and impedance are as follows: IZ is applied 40 ±10 ms prior to reading. Mounting contacts are located 3/8″ to 1/2″ from the inside edge of mounting clips to the body of the diode (TA = 25°C +8°C, −2°C). 8. SURGE CURRENT (I R ) Surge current is specified as the maximum allowable peak, non−recurrent square−wave current with a pulse width, PW, of 8.3 ms. The data given in Figure 5 may be used to find the maximum surge current for a square wave of any pulse width between 1 ms and 1000 ms by plotting the applicable points on logarithmic paper. Examples of this, using the 3.3 V and 200 V zener are shown in Figure 6. Mounting contact located as specified in Note 7 (TA = 25°C +8°C, −2°C). 9. VOLTAGE REGULATION ( VZ) The conditions for voltage regulation are as follows: VZ measurements are made at 10% and then at 50% of the IZ max value listed in the electrical characteristics table. The test current time duration for each VZ measurement is 40 ±10 ms. Mounting contact located as specified in Note 7 (TA = 25°C +8°C, −2°C). 10.MAXIMUM REGULATOR CURRENT (I ZM ) The maximum current shown is based on the maximum voltage of a 5% type unit, therefore, it applies only to the B−suffix device. The actual IZM for any device may not exceed the value of 5 watts divided by the actual VZ of the device. TL = 75°C at 3/8″ maximum from the device body.

Figure 9. Zener Voltage versus Zener Current power pulses or from Figure 1 for dc power. of PD and the extremes of TJ (TJ) may be estimated. excursions as low as possible. degradation should the limits of Figure 5 be exceeded.

http://onsemi.com PACKAGE DIMENSIONS AXIAL LEAD CASE 17−02 ISSUE C B D F K A F K DIM MIN MAX MIN MAX MILLIMETERSINCHES A 0.330 0.350 8.38 8.89 B 0.130 0.145 3.30 3.68 D 0.037 0.043 0.94 1.09 K 1.000 1.250 25.40 31.75 NOTES: 1. LEAD DIAMETER AND FINISH NOT CONTROLLED WITHIN DIMENSION F. STYLE 1: PIN 1. ANODE 2. CATHODE ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION N. American Technical Support: 800−282−9855 Toll Free USA/Canada Japan: ON Semiconductor, Japan Customer Focus Center 2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051 Phone : 81−3−5773−3850 1N5333B/D SURMETIC is a trademark of Semiconductor Components Industries, LLC (SCILLC). LITERATURE FULFILLMENT : Literature Distribution Center for ON Semiconductor P.O. Box 61312, Phoenix, Arizona 85082−1312 USA Phone : 480−829−7710 or 800−344−3860 Toll Free USA/Canada Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada Email: orderlit@onsemi.com ON Semiconductor Website: http://onsemi.com Order Literature: http://www.onsemi.com/litorder For additional information, please contact your local Sales Representative.