DE2F3KX102JA2A

DESD33A102KA2B MURATA | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 83

Technical content

Cat.No.C85E-3 Safety Standard Certified Ceramic Capacitors/ High Voltage Ceramic Capacitors !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.C85E.pdf Jul.13,2011

C85E.pdf Jul.13,2011 EU RoHS Compliant

• All the products in this catalog comply with EU RoHS.
• EU RoHS is "the European Directive 2002/95/EC on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment."
• For more details, please refer to our website 'Murata's Approach for EU RoHS' (http://www.murata.com/info/rohs.html). !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Part Numbering 2 Type KY (Basic Insulation) -IEC60384-14 Class X1, Y2- 5 Type KH (Basic Insulation) -IEC60384-14 Class X1, Y2- 7 Type KX Small Size (Reinforced Insulation) -IEC60384-14 Class X1, Y1- 9 Type KX (Reinforced Insulation) -IEC60384-14 Class X1, Y1- 11 Type KY/KH/KX Specifications and Test Methods 13 DEJ Series -Based on the Electrical Appliance and Material Safety Law of Japan- 17 DEJ Series Specifications and Test Methods 18 Safety Certified Ceramic Capacitors Characteristics Data (Typical Example) 21 Safety Certified Ceramic Capacitors Packaging 24 Safety Certified Ceramic Capacitors !Caution 26 Safety Certified Ceramic Capacitors Notice 29 DES Series (125°C Guaranteed/Low-dissipation Factor/DC500V-1kV) 30 DES Series Specifications and Test Methods 32 DEH Series (125°C Guaranteed/Low-dissipation Factor/DC500V-3.15kV) 34 DEH Series Specifications and Test Methods 37 DEA Series (125°C Guaranteed/Class 1/DC1k-3.15kV) 39 DEA Series Specifications and Test Methods 42 DEB Series (Class 2/DC1k-3.15kV) 44 DEB Series Specifications and Test Methods 47 DEC Series (Class 1, 2/DC6.3kV) 49 DEC Series Specifications and Test Methods 51 DEF Series (Only for LCD Backlight Inverter Circuit/6.3kVp-p) 53 DEF Series Specifications and Test Methods 55 High Voltage Ceramic Capacitors Characteristics Data (Typical Example) 57 High Voltage Ceramic Capacitors Packaging 58 High Voltage Ceramic Capacitors !Caution 60 High Voltage Ceramic Capacitors Notice 67 Type KJ -IEC60384-14 Class X1, Y2- 68 Type KJ Specifications and Test Methods 69 Safety Certified Ceramic Capacitors for Automotive Characteristics Data (Typical Example) 74 Safety Certified Ceramic Capacitors for Automotive Packaging 75 Safety Certified Ceramic Capacitors for Automotive !Caution 76 Safety Certified Ceramic Capacitors for Automotive Notice 79 Safety Certified Ceramic Capacitors/High Voltage Ceramic Capacitors ISO9000 Certifications 80 C85E.pdf Jul.13,2011

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.C85E.pdf Jul.13,2011 o Part Numbering (Part Number) Safety Standard Certified Ceramic Capacitors tCapacitance Expressed by three figures. The unit is pico-farad (pF). The first and second figures are significant digits, and the third figure expresses the number of zeros that follow the two numbers. oIndividual Specification Code For part number that cannot be identified without "Individual Specification," it is added at the end of part number, expressed by three-digit alphanumerics. For Electrical Appliance and Material Safety Law of Japan, the first three digits (qProduct ID and wSeries Category) express "Series Name." For Safety Certified Capacitors, the first three digits express product code. The fourth figure expresses certified type shown in rSafety Standard Certified Type column. Vertical Crimp Long Vertical Crimp Long Vertical Crimp Short Straight Long Straight Short Vertical Crimp Taping Straight Taping t 102 y M q DE u r KH e w i A o qProduct ID wSeries Category eTemperature Characteristics rRated Voltage/Safety Standard Certified Type Code KH KY KX yCapacitance Tolerance Capacitance ToleranceCode J K M Z T5% T10% T20% W80%, Y20% ContentsOutlineCode J Cap. Change or Temp. Coeff. Temperature Range Temperature Characteristics Rated Voltage Code T10% W20%,Y55% W30%,Y80% W350 to Y1000ppm/D Y25 to W85D W20 to W85D B E F SL Safety Standard Certified AC250V (r.m.s.) IEC60384-14 Class X1, Y1 IEC60384-14 Class X1, Y2 -Products based on the Electrical Appliance and Material Safety Law of Japan- AC250V X1, Y2; AC250V, (Safety Standard Certified Type KH) X1, Y2; AC250V, (Safety Standard Certified Type KY) X1, Y1; AC250V, (Safety Standard Certified Type KX) Product ID DE Safety Standard Certified Ceramic Capacitors/ High Voltage Ceramic Capacitors uLead Style Lead StyleCode Lead Spacing Pitch of ComponentsLead Diameter Dimensions (mm) 7.5 7.5 7.5 7.5 7.5 7.5 7.5 ø0.6 T0.05 ø0.6 W0.1,Y0.05 ø0.6 T0.05 ø0.6 W0.1, Y0.05 ø0.6 T0.05 ø0.6 T0.05 ø0.6 T0.05 ø0.6 W0.1, Y0.05 ø0.6 T0.05 ø0.6 T0.05 Y/CR Y/CR Y/CR Y/CR 12.7 25.4 25.4 iPackaging PackagingCode A B Ammo Pack Taping Bulk

!N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C 85E.pdf Jul.13,2011 (Part N um ber) High Voltage Ceramic Capacitors (500V-6.3kV) tCapacitance Expressed by three figures. The unit is pico-farad (pF). The first and second figures are significant digits, and the third figure expresses the number of zeros that follow the two numbers. oIndividual Specification Code For part number that cannot be identified without "Individual Specification," it is added at the end of part number, expressed by three-digit alphanumerics. The first three digits (qProduct ID and wSeries Category) express "Series Name." Vertical Crimp Long Vertical Crimp Short Straight Long Straight Short Vertical Crimp Taping Straight Taping t 102 y K q D E u N 2 r e B 3 w B i A o qProduct ID wSeries Category eTemperature Characteristics rRated Voltage Code LH yCapacitance Tolerance Capacitance ToleranceCode C D J K Z T0.25pF T0.5pF T5% T10% W80%, Y20%ContentsOutlineCode A B C H S F Cap. Change or Temp. Coeff. Temperature Range Temperature Characteristics Rated Voltage Code B 3 C 3 R 3 D 3 T10% W20%,Y55% W30%,Y80% T20% W15%,Y30% T15% W15%,Y30% W20%,Y30%/CR W350 to Y1000ppm/D/CR 0T60ppm/D Y25 to W85D Y25 to W85D W85 to W125D Y25 to W85D W85 to W125D Y25 to W125D/CR W20 to W85D/CR W20 to W85D B E F C R D SL CH High Voltage Class 1 (Char. SL) DC1-3.15kV Rated Class 2 DC1-3.15kV Rated Class 1, 2 DC6.3kV Rated High Temperature Guaranteed, Low-dissipation Factor (Char. R, C) High Temperature Guaranteed, Low-dissipation Factor (Char. D) LCD Backlight Inverter Circuit DC500V DC1kV DC2kV DC3.15kV DC6.3kV 6.3kVp-p Product ID D E High Voltage Ceramic Capacitors (500V-6.3kV) / Safety Standard Certified Ceramic Capacitors uLead Style Lead StyleCode A 2 A 3 A 4 B 2/J2 B 3/J3 B 4 C 1 C 3 C 4 C D D 1 D 3 D D N 2 N 3 N 7 Lead Spacing Pitch of ComponentsLead Diameter Dimensions (mm) 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 ø 0.6T0.05 ø 0.6T0.05 ø 0.5T0.05 ø 0.6T0.05 ø 0.5T0.05 ø 0.5T0.05 ø 0.6T0.05 ø 0.5T0.05 ø 0.6T0.05 ø 0.6T0.05 Y/CR Y/CR Y/CR Y/CR 12.7 12.7 iPackaging PackagingCode A B Ammo Pack Taping Bulk

!N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C 85E.pdf Jul.13,2011 (Part N um ber) Safety Standard Certified Ceramic Capacitors for Automotive tCapacitance Expressed by three figures. The unit is pico-farad (pF). The first and second figures are significant digits, and the third figure expresses the number of zeros that follow the two numbers. oIndividual Specification Code For part number that cannot be identified without "Individual Specification," it is added at the end of part number, expressed by three-digit alphanumerics. The first three digits express product code. The fourth figure expresses certified type shown in rSafety Standard Certified Type column. Vertical Crimp Long Vertical Crimp Short Vertical Crimp Taping t 102 y M q D E u N 3 r K J e w i A o qProduct ID wSeries Category eTemperature Characteristics rRated Voltage/Safety Standard Certified Type Code K J yCapacitance Tolerance Capacitance ToleranceCode K M T10% T20% ContentsOutlineCode Cap. Change or Temp. Coeff. Temperature Range Temperature Characteristics Rated Voltage Code B 3 T10% W20%,Y55% Y25 to W85D B E Safety Standard Certified IEC60384-14 Class X1, Y2 X1, Y2; AC300V, (Safety Standard Certified Type KJ) Product ID D E Safety Standard Certified Ceramic Capacitors/ High Voltage Ceramic Capacitors uLead Style Lead StyleCode A 3 B 3 N 3 Lead Spacing Pitch of ComponentsLead Diameter Dimensions (mm) 7.5 ø 0.6T0.05 Y/CR Y/CR iPackaging PackagingCode A B Ammo Pack Taping Bulk

C85E.pdf Jul.13,2011 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Safety Standard Certified Ceramic Capacitors Type KY (Basic Insulation) -IEC60384-14 Class X1, Y2- ød F–1.0 (in mm) D max. 25.0 min. e T max. 3.0 max. Lead Code Coating Extension e A2, A3 Up to the end of crimp ød 0.6–0.05 [Bulk] Vertical Crimp Long (A2, A3) ød F–0.8 D max. e T max. 3.0 max. 5.0–1.0 (in mm) Lead Code Coating Extension e B2, B3 Up to the end of crimp ød 0.6–0.05 [Bulk] Vertical Crimp Short (B2, B3) n Standard Certification Standard No. Rated VoltageCertified No. UL CSA VDE BSI SEMKO DEMKO FIMKO NEMKO ESTI NSW E37921 1283280 40006273 KM 37901 812168 314115 24197 P08209361 08.0710 6824 AC250V(r.m.s.) UL1414 CSA E60384-14 IEC 60384-14 EN 60384-14 EN 60065 (8.8, 14.2) IEC 60384-14 EN 60384-14 IEC 60384-14 EN 60384-14 IEC 60384-14 AS3250
• The certification number might change due to revision of the application standard and changes in the range of acquisition.
• Please contact us when the certification of Chinese Safety Standard or South Korean Safety Standard is necessary. n Marking t Manufactured Date Code Class Code X1Y2 Rated Voltage Mark 250~ e Capacitance Tolerance w Nominal Capacitance (Under 100pF: Actual value, 100pF and over: Marked with 3 figures) q Type Designation KY r Company Name Code : Made in Taiwan : Made in Thailand 472M KY250~ X1 Y2 816 q w e rt Example Item 8 15 n Features 1. Compact size; diameter 25% less than Type KH. 2. Operating temperature range guaranteed up to 125 degrees (UL: 85 deg.). 3. Dielectric strength: AC2000V (for lead spacing F=5mm) AC2600V (for lead spacing F=7.5mm) 4. Class X1/Y2 capacitors certified by UL/CSA/VDE/BSI/SEMKO/DEMKO/FIMKO/NEMKO/ESTI/ NSW. 5. Coated with flame-retardant epoxy resin (conforming to UL94V-0 standard). Please contact us when a halogen-free product* is necessary. * Cl=900ppm max., Br=900ppm max. and Cl+Br=1500ppm max. 6. Taping available for automatic insertion. n Applications 1. Ideal for use as X/Y capacitors for AC line filters and primary-secondary coupling on switching power supplies and AC adapters. 2. Ideal for use on D-A isolation and noise absorption for DAA modems without transformers. Do not use these products in any automotive power train or safety equipment including battery chargers for electric vehicles and plug-in hybrids. Only Murata products clearly stipulated as "for Automotive use" on its catalog can be used for automobile applications such as power train and safety equipment.

C 85E.pdf Jul.13,2011 !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Lead Spacing F=7.5m m Part Number AC Rated Voltage (Vac) Temp. Char. Capacitance (pF) Body Dia. D (mm) Lead Spacing F (mm) Body Thickness T (mm) Lead Package Long Bulk Lead Package Short Bulk Lead Package Taping (1) D E21XK Y100JpppM 02 250 SL 10 –5% 8 max. 7.5 5.0 max. A3B B3B N3A D E21XK Y150JpppM 02 250 SL 15 –5% 8 max. 7.5 5.0 max. A3B B3B N3A D E21XK Y220JpppM 02 250 SL 22 –5% 8 max. 7.5 5.0 max. A3B B3B N3A D E21XK Y330JpppM 02 250 SL 33 –5% 8 max. 7.5 5.0 max. A3B B3B N3A D E21XK Y470JpppM 02 250 SL 47 –5% 8 max. 7.5 5.0 max. A3B B3B N3A D E21XK Y680JpppM 02 250 SL 68 –5% 8 max. 7.5 5.0 max. A3B B3B N3A D E2B 3K Y101K pppM 02 250 B 100 –10% 7 max. 7.5 5.0 max. A3B B3B N3A D E2B 3K Y151K pppM 02 250 B 150 –10% 7 max. 7.5 5.0 max. A3B B3B N3A D E2B 3K Y221K pppM 02 250 B 220 –10% 7 max. 7.5 5.0 max. A3B B3B N3A D E2B 3K Y331K pppM 02 250 B 330 –10% 7 max. 7.5 5.0 max. A3B B3B N3A D E2B 3K Y471K pppM 02 250 B 470 –10% 7 max. 7.5 5.0 max. A3B B3B N3A D E2B 3K Y681K pppM 02 250 B 680 –10% 8 max. 7.5 5.0 max. A3B B3B N3A D E2E3K Y102M pppM 02 250 E 1000 –20% 7 max. 7.5 5.0 max. A3B B3B N3A D E2E3K Y152M pppM 02 250 E 1500 –20% 7 max. 7.5 5.0 max. A3B B3B N3A D E2E3K Y222M pppM 02 250 E 2200 –20% 8 max. 7.5 5.0 max. A3B B3B N3A D E2E3K Y332M pppM 02 250 E 3300 –20% 9 max. 7.5 5.0 max. A3B B3B N3A D E2E3K Y472M pppM 02 250 E 4700 –20% 10 max. 7.5 5.0 max. A3B B3B N3A D E2F3K Y103M pppM 02 250 F 10000 –20% 14 max. 7.5 5.0 max. A3B B3B N3A Three blank colum ns are filled w ith the lead and packaging codes. Please refer to the 3 colum ns on the right for the appropriate code. Individual specification code "M 02" expresses "sim plicity m arking and guarantee of dielectric strength betw een lead w ires: AC 2600V." M urata part num bers m ight be changed depending on lead code or any other changes. Therefore, please specify only the type nam e (KY) and capacitance of products in the parts list w hen it is required for applying safety standard of electric equipm ent. Lead Spacing F=5m m Part Number AC Rated Voltage (Vac) Temp. Char. Capacitance (pF) Body Dia. D (mm) Lead Spacing F (mm) Body Thickness T (mm) Lead Package Long Bulk Lead Package Short Bulk Lead Package Taping (1) D E21XK Y100JpppM 01 250 SL 10 –5% 8 max. 5.0 5.0 max. A2B B2B N2A D E21XK Y150JpppM 01 250 SL 15 –5% 8 max. 5.0 5.0 max. A2B B2B N2A D E21XK Y220JpppM 01 250 SL 22 –5% 8 max. 5.0 5.0 max. A2B B2B N2A D E21XK Y330JpppM 01 250 SL 33 –5% 8 max. 5.0 5.0 max. A2B B2B N2A D E21XK Y470JpppM 01 250 SL 47 –5% 8 max. 5.0 5.0 max. A2B B2B N2A D E21XK Y680JpppM 01 250 SL 68 –5% 8 max. 5.0 5.0 max. A2B B2B N2A D E2B 3K Y101K pppM 01 250 B 100 –10% 7 max. 5.0 5.0 max. A2B B2B N2A D E2B 3K Y151K pppM 01 250 B 150 –10% 7 max. 5.0 5.0 max. A2B B2B N2A D E2B 3K Y221K pppM 01 250 B 220 –10% 7 max. 5.0 5.0 max. A2B B2B N2A D E2B 3K Y331K pppM 01 250 B 330 –10% 7 max. 5.0 5.0 max. A2B B2B N2A D E2B 3K Y471K pppM 01 250 B 470 –10% 7 max. 5.0 5.0 max. A2B B2B N2A D E2B 3K Y681K pppM 01 250 B 680 –10% 8 max. 5.0 5.0 max. A2B B2B N2A D E2E3K Y102M pppM 01 250 E 1000 –20% 7 max. 5.0 5.0 max. A2B B2B N2A D E2E3K Y152M pppM 01 250 E 1500 –20% 7 max. 5.0 5.0 max. A2B B2B N2A D E2E3K Y222M pppM 01 250 E 2200 –20% 8 max. 5.0 5.0 max. A2B B2B N2A D E2E3K Y332M pppM 01 250 E 3300 –20% 9 max. 5.0 5.0 max. A2B B2B N2A D E2E3K Y472M pppM 01 250 E 4700 –20% 10 max. 5.0 5.0 max. A2B B2B N2A Three blank colum ns are filled w ith the lead and packaging codes. Please refer to the 3 colum ns on the right for the appropriate code. Individual specification code "M 01" expresses "sim plicity m arking and guarantee of dielectric strength betw een lead w ires: AC 2000V." M urata part num bers m ight be changed depending on lead code or any other changes. Therefore, please specify only the type nam e (KY) and capacitance of products in the parts list w hen it is required for applying safety standard of electric equipm ent.

C 85E.pdf Jul.13,2011 !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Safety Standard Certified Ceramic Capacitors Type K H (B asic Insulation) -IEC 60384-14 C lass X1, Y2- n Features 1. O perating tem perature range guaranteed up to 125 degrees (U L: 85 deg.). 2. D ielectric strength: AC 2600V 3. C lass X1/Y2 capacitors certified by U L/C SA/VD E/BSI/SEM KO /D EM KO /FIM KO /N EM KO /ESTI/ N SW . 4. C oated w ith flam e-retardant epoxy resin (conform ing to U L94V-0 standard). Please contact us w hen a halogen-free product* is necessary. * C l=900ppm m ax., Br=900ppm m ax. and C l+Br=1500ppm m ax. 5. Taping available for autom atic insertion. n Applications Ideal for use as X/Y capacitors for AC line filters and prim ary-secondary coupling on sw itching pow er supplies and AC adapters. D o not use these products in any autom otive pow er train or safety equipm ent including battery chargers for electric vehicles and plug-in hybrids. O nly M urata products clearly stipulated as "for Autom otive use" on its catalog can be used for autom obile applications such as pow er train and safety equipm ent. ød F–1.0 (in m m ) D m ax. 25.0 m in. e T m ax. 3.0 m ax. Lead Code Coating Extension e A3 U p to the end of crim p ø d 0.6–0.05 [Bulk] Vertical Crimp Long (A3) ød F–0.8 D m ax. e T m ax. 3.0 m ax. 5.0–1.0 (in m m ) Lead Code Coating Extension e B3 U p to the end of crim p ø d 0.6–0.05 [Bulk] Vertical Crimp Short (B3) n Standard Certification Standard No. Rated VoltageCertified No. UL CSA VDE BSI SEMKO DEMKO FIMKO NEMKO ESTI NSW E37921 1343805 40002796 KM 37901 812163 314578 24195 P08209182 08.0708 6529 AC250V(r.m.s.) UL1414 CSA E60384-14 IEC 60384-14 EN 60384-14 EN 60065 (8.8, 14.2) IEC 60384-14 EN 60384-14 IEC 60384-14 EN 60384-14 IEC 60384-14 AS3250
• The certification num ber m ight change due to revision of the application standard and changes in the range of acquisition.
• Please contact us w hen the certification of C hinese Safety Standard or South Korean Safety Standard is necessary. n Marking q Type D esignation w N om inal C apacitance (M arked w ith 3 figures) e C apacitance Tolerance r C om pany N am e C ode : M ade in Taiw an : M ade in Thailand t M anufactured D ate C ode U L Approval M ark C SA Approval M ark VD E Approval M ark BSI Approval M ark SEM KO Approval M ark D EM KO Approval M ark FIM KO Approval M ark N EM KO Approval M ark ESTI Approval M ark C lass C ode R ated Voltage M ark KH /CR /CR BSI X1Y2 250~ FI N D K H 472M X1Y2 B SI q w e r t M J502 250~ Example Item FI N M J502 8 15 D

C 85E.pdf Jul.13,2011 !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Part Number AC Rated Voltage (Vac) Temp. Char. Capacitance (pF) Body Dia. D (mm) Lead Spacing F (mm) Body Thickness T (mm) Lead Package Long Bulk Lead Package Short Bulk Lead Package Taping (1) D E2B 3K H 101K ppp 250 B 100 –10% 8 max. 7.5 7.0 max. A3B B3B N3A D E2B 3K H 151K ppp 250 B 150 –10% 8 max. 7.5 7.0 max. A3B B3B N3A D E2B 3K H 221K ppp 250 B 220 –10% 8 max. 7.5 7.0 max. A3B B3B N3A D E2B 3K H 331K ppp 250 B 330 –10% 8 max. 7.5 7.0 max. A3B B3B N3A D E2B 3K H 471K ppp 250 B 470 –10% 8 max. 7.5 7.0 max. A3B B3B N3A D E2B 3K H 681K ppp 250 B 680 –10% 9 max. 7.5 7.0 max. A3B B3B N3A D E2E3K H 102M ppp 250 E 1000 –20% 8 max. 7.5 7.0 max. A3B B3B N3A D E2E3K H 152M ppp 250 E 1500 –20% 9 max. 7.5 7.0 max. A3B B3B N3A D E2E3K H 222M ppp 250 E 2200 –20% 10 max. 7.5 7.0 max. A3B B3B N3A D E2E3K H 332M ppp 250 E 3300 –20% 12 max. 7.5 7.0 max. A3B B3B N3A D E2E3K H 472M ppp 250 E 4700 –20% 13 max. 7.5 7.0 max. A3B B3B N3A D E2F3K H 103M ppp 250 F 10000 –20% 16 max. 7.5 7.0 max. A3B B3B N7A Three blank colum ns are filled w ith the lead and packaging codes. Please refer to the 3 colum ns on the right for the appropriate code. M urata part num bers m ight be changed depending on lead code or any other changes. Therefore, please specify only the type nam e (KH ) and capacitance of products in the parts list w hen it is required for applying safety standard of electric equipm ent.

C 85E.pdf Jul.13,2011 !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Safety Standard Certified Ceramic Capacitors Type K X Sm all Size (R einforced Insulation) -IEC 60384-14 C lass X1, Y1- n Features 1. W e design capacitors m uch m ore com pact in size than current Type KX, having reduced the diam eter by 20% m ax. 2. O perating tem perature range guaranteed up to 125 degrees (U L: 85 deg.). 3. D ielectric strength: AC 4000V 4. C lass X1/Y1 capacitors certified by U L/C SA/VD E/BSI/SEM KO /D EM KO /FIM KO /N EM KO /ESTI/ IM Q . 5. C an be use w ith a com ponent in appliances requiring reinforced insulation and double insulation based on U L1492, IEC 60065 and IEC 60950. 6. C oated w ith flam e-retardant epoxy resin (conform ing to U L94V-0 standard). Please contact us w hen a halogen-free product* is necessary. * C l=900ppm m ax., Br=900ppm m ax. and C l+Br=1500ppm m ax. 7. Taping available for autom atic insertion. n Applications 1. Ideal for use as X/Y capacitors for AC line filters and prim ary-secondary coupling on sw itching pow er supplies and AC adapters. 2. Ideal for use on D -A isolation and noise absorption for D AA m odem s w ithout transform ers. D o not use these products in any autom otive pow er train or safety equipm ent including battery chargers for electric vehicles and plug-in hybrids. O nly M urata products clearly stipulated as "for Autom otive use" on its catalog can be used for autom obile applications such as pow er train and safety equipm ent. *: Sm all sized Type KX differs from current Type KX in electrical characteristics, such as the voltage dependency, capacitance tem perature dependency, and D ielectric strength. Therefore, before replacing current Type KX, please m ake a perform ance check by equipm ent. Please also refer to N otice (R ating) item 2, "Perform ance C heck by Equipm ent," below . ød F–1.0 (in m m ) D m ax. 25.0 m in. e T m ax. 3.0 m ax. Lead Code Coating Extension e A4 U p to the end of crim p ø d 0.6–0.05 [Bulk] Vertical Crimp Long (A4) ød F–0.8 D m ax. e T m ax. 3.0 m ax. 5.0–1.0 (in m m ) Lead Code Coating Extension e B4 U p to the end of crim p ø d 0.6–0.05 [Bulk] Vertical Crimp Short (B4)

C 85E.pdf Jul.13,2011 !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. n Standard Certification Standard No. Rated VoltageCertified No. UL CSA VDE BSI SEMKO DEMKO FIMKO NEMKO ESTI IMQ E37921 1343810 40002831 KM 37901 812158 314577 24191 P08209173 08.0707 V4069 AC250V(r.m.s.) UL1414 CSA E60384-14 IEC 60384-14 EN 60384-14 EN 60065 (8.8, 14.2) IEC 60384-14 EN 60384-14 IEC 60384-14 EN 60384-14 EN 60384-14
• The certification num ber m ight change due to revision of the application standard and changes in the range of acquisition.
• Please contact us w hen the certification of C hinese Safety Standard or South Korean Safety Standard is necessary. n Marking t M anufactured D ate C ode C lass C ode X1Y1 R ated Voltage M ark 250~ e C apacitance Tolerance w N om inal C apacitance (M arked w ith 3 figures) q Type D esignation KX 472M K X250~ X1 Y1 816 q w e rt Example Item r C om pany N am e C ode : M ade in Taiw an : M ade in Thailand8 15 Part Number AC Rated Voltage (Vac) Temp. Char. Capacitance (pF) Body Dia. D (mm) Lead Spacing F (mm) Body Thickness T (mm) Lead Package Long Bulk Lead Package Short Bulk Lead Package Taping (1) D E1B 3K X101K pppL01 250 B 100 –10% 8 max. 10.0 7.0 max. A4B B4B N4A D E1B 3K X151K pppL01 250 B 150 –10% 8 max. 10.0 7.0 max. A4B B4B N4A D E1B 3K X221K pppL01 250 B 220 –10% 8 max. 10.0 7.0 max. A4B B4B N4A D E1B 3K X331K pppL01 250 B 330 –10% 8 max. 10.0 7.0 max. A4B B4B N4A D E1B 3K X471K pppL01 250 B 470 –10% 8 max. 10.0 7.0 max. A4B B4B N4A D E1B 3K X681K pppL01 250 B 680 –10% 9 max. 10.0 7.0 max. A4B B4B N4A D E1E3K X102M pppL01 250 E 1000 –20% 7 max. 10.0 7.0 max. A4B B4B N4A D E1E3K X152M pppL01 250 E 1500 –20% 8 max. 10.0 7.0 max. A4B B4B N4A D E1E3K X222M pppL01 250 E 2200 –20% 9 max. 10.0 7.0 max. A4B B4B N4A D E1E3K X332M pppL01 250 E 3300 –20% 10 max. 10.0 7.0 max. A4B B4B N4A D E1E3K X472M pppL01 250 E 4700 –20% 12 max. 10.0 7.0 max. A4B B4B N4A Three blank colum ns are filled w ith the lead and packaging codes. Please refer to the 3 colum ns on the right for the appropriate code. M urata part num bers m ight be changed depending on lead code or any other changes. Therefore, please specify only the type nam e (KX) and capacitance of products in the parts list w hen it is required for applying safety standard of electric equipm ent.

C 85E.pdf Jul.13,2011 !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Safety Standard Certified Ceramic Capacitors Type K X (R einforced Insulation) -IEC 60384-14 C lass X1, Y1- n Features 1. O perating tem perature range guaranteed up to 125 degrees (U L: 85 deg.). 2. D ielectric strength: AC 4000V 3. C lass X1/Y1 capacitors certified by U L/C SA/VD E/BSI/SEM KO /D EM KO /FIM KO /N EM KO /ESTI/ IM Q . 4. C an be use w ith a com ponent in appliances requiring reinforced insulation and double insulation based on U L1492, IEC 60065 and IEC 60950. 5. C oated w ith flam e-retardant epoxy resin (conform ing to U L94V-0 standard). Please contact us w hen a halogen-free product* is necessary. * C l=900ppm m ax., Br=900ppm m ax. and C l+Br=1500ppm m ax. 6. Taping available for autom atic insertion. n Applications Ideal for use as X/Y capacitors for AC line filters and prim ary-secondary coupling on sw itching pow er supplies and AC adapters. D o not use these products in any autom otive pow er train or safety equipm ent including battery chargers for electric vehicles and plug-in hybrids. O nly M urata products clearly stipulated as "for Autom otive use" on its catalog can be used for autom obile applications such as pow er train and safety equipm ent. ød F–1.0 (in m m ) D m ax. 25.0 m in. e T m ax. 4.0 m ax. Lead Code Coating Extension e A5 U p to the end of crim p ø d 0.6–0.1 0.05 [Bulk] Vertical Crimp Long (A5) ød F–0.8 D m ax. e T m ax. 4.0 m ax. 5.0–1.0 (in m m ) Lead Code Coating Extension e B5 U p to the end of crim p ø d 0.6–0.1 0.05 [Bulk] Vertical Crimp Short (B5) n Standard Certification Standard No. Rated VoltageCertified No. UL CSA VDE BSI SEMKO DEMKO FIMKO NEMKO ESTI IMQ E37921 1343810 40002831 KM 37901 812158 314577 24191 P08209173 08.0707 V4069 AC250V(r.m.s.) UL1414 CSA E60384-14 IEC 60384-14 EN 60384-14 EN 60065 (8.8, 14.2) IEC 60384-14 EN 60384-14 IEC 60384-14 EN 60384-14 EN 60384-14
• The certification num ber m ight change due to revision of the application standard and changes in the range of acquisition.
• Please contact us w hen the certification of C hinese Safety Standard or South Korean Safety Standard is necessary. n Marking FI N D FI N D K X222M X1Y1 B SI q w e r t M J502 250~ Example Item M J502 q Type D esignation w N om inal C apacitance (U nder 100pF: Actual value, 100pF and over: M arked w ith 3 figures) e C apacitance Tolerance r C om pany N am e C ode : M ade in Taiw an : M ade in Thailand t M anufactured D ate C ode U L Approval M ark C SA Approval M ark VD E Approval M ark BSI Approval M ark SEM KO Approval M ark D EM KO Approval M ark FIM KO Approval M ark N EM KO Approval M ark ESTI Approval M ark IM Q Approval M ark C lass C ode R ated Voltage M ark KX BSI X1Y1 250~ 8 15

C 85E.pdf Jul.13,2011 !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Part Number AC Rated Voltage (Vac) Temp. Char. Capacitance (pF) Body Dia. D (mm) Lead Spacing F (mm) Body Thickness T (mm) Lead Package Long Bulk Lead Package Short Bulk Lead Package Taping (1) D E11XK X100Jppp 250 SL 10 –5% 9 max. 10.0 8.0 max. A5B B5B N5A D E11XK X150Jppp 250 SL 15 –5% 9 max. 10.0 8.0 max. A5B B5B N5A D E11XK X220Jppp 250 SL 22 –5% 9 max. 10.0 8.0 max. A5B B5B N5A D E11XK X330Jppp 250 SL 33 –5% 9 max. 10.0 8.0 max. A5B B5B N5A D E11XK X470Jppp 250 SL 47 –5% 9 max. 10.0 8.0 max. A5B B5B N5A D E11XK X680Jppp 250 SL 68 –5% 9 max. 10.0 8.0 max. A5B B5B N5A D E1B 3K X101K ppp 250 B 100 –10% 9 max. 10.0 8.0 max. A5B B5B N5A D E1B 3K X151K ppp 250 B 150 –10% 9 max. 10.0 8.0 max. A5B B5B N5A D E1B 3K X221K ppp 250 B 220 –10% 9 max. 10.0 8.0 max. A5B B5B N5A D E1B 3K X331K ppp 250 B 330 –10% 9 max. 10.0 8.0 max. A5B B5B N5A D E1B 3K X471K ppp 250 B 470 –10% 9 max. 10.0 8.0 max. A5B B5B N5A D E1B 3K X681K ppp 250 B 680 –10% 10 max. 10.0 8.0 max. A5B B5B N5A D E1E3K X102M pppA 01 250 E 1000 –20% 8 max. 10.0 8.0 max. A5B B5B N5A D E1E3K X152M pppA 01 250 E 1500 –20% 9 max. 10.0 8.0 max. A5B B5B N5A D E1E3K X222M pppA 01 250 E 2200 –20% 10 max. 10.0 8.0 max. A5B B5B N5A D E1E3K X332M pppA 01 250 E 3300 –20% 12 max. 10.0 8.0 max. A5B B5B N5A D E1E3K X392M pppA 01 250 E 3900 –20% 13 max. 10.0 8.0 max. A5B B5B N5A D E1E3K X472M pppA 01 250 E 4700 –20% 15 max. 10.0 8.0 max. A5B B5B N5A Three blank colum ns are filled w ith the lead and packaging codes. Please refer to the 3 colum ns on the right for the appropriate code. M urata part num bers m ight be changed depending on lead code or any other changes. Therefore, please specify only the type nam e (KX) and capacitance of products in the parts list w hen it is required for applying safety standard of electric equipm ent.

C 85E.pdf Jul.13,2011 Safety Standard C ertified Type K Y/K H /K X Specifications and Test M ethods Continued on the following page. Char. Specifications D .F.V2.5% D .F.V5.0% Q U400+20C * (C F30pF) Q U1000 (C U30pF) B, E F SL Char. Capacitance Change W ithin –10% W ithin +20 –55% W ithin +30 –80% B E F Char. Temperature Coefficient +350 to -1000ppm /°CSL Type Test Voltage AC 2600V(r.m .s.) AC 2600V(r.m .s.) AC 4000V(r.m .s.) KY KH KX Step Temperature (ºC) 20–2 -25–2 20–2 85–2 20–2 Type Test Voltage For lead spacing F=5m m AC 2000V(r.m .s.) For lead spacing F=7.5m m AC 2600V(r.m .s.) AC 2600V(r.m .s.) AC 4000V(r.m .s.) KY KH KX "C " expresses nom inal capacitance value (pF). The lead w ire of a capacitor should be dipped into m olten solder for 2–0.5 sec. The depth of im m ersion is up to about 1.5 to 2.0m m from the root of lead w ires. Tem p. of solder: Lead Free Solder (Sn-3Ag-0.5C u) 245–5°C H 63 Eutectic Solder 235–5°C

8 Solderability of Leads

Lead w ire should be soldered w ith uniform coating on the axial direction over 3/4 of the circum ferential direction. The capacitance m easurem ent should be m ade at each step specified in Table 3. <Table 3> 7 Temperature Characteristics (Tem p. range: -25 to +85°C ) (Tem p. range: +20 to +85°C ) The capacitor should not be dam aged w hen the test voltages from Table 1 are applied betw een the lead w ires for 60 sec. <Table 1>

6 Dielectric

First, the term inals of the capacitor should be connected together. Then, as show n in the figure at right, a m etal foil should be closely w rapped around the body of the capacitor to the distance of about 3 to 6m m from each term inal. Then, the capacitor should be inserted into a container filled w ith m etal balls of about 1m m diam eter. Finally, AC voltage from Table 2 is applied for 60 sec. betw een the capacitor lead w ires and m etal balls. <Table 2> The insulation resistance should be m easured w ith D C 500–50V w ithin 60–5 sec. of charging. The voltage should be applied to the capacitor through a resistor of 1M Ω . 5 Insulation Resistance (I.R.) 10000M Ω m in. 4 Dissipation Factor (D.F.) Q The capacitance, dissipation factor and Q should be m easured m ax.

3 Capacitance W ithin specified tolerance

The capacitor should be visually inspected.2 Marking To be easily legible The capacitor should be visually inspected for evidence of defect. D im ensions should be m easured w ith slide calipers.

1 Appearance and Dimensions N o visible defect, and dim ensions are w ithin

specified range. No. Test MethodSpecificationsItem Operating Temperature Range: -25 to +125°C (-25 to +85°C for UL standards ) M etal Foil about 3 to 6m m M etal Balls Type K Y/K H /K X Specifications and Test M ethods !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

C 85E.pdf Jul.13,2011 Safety Standard C ertified Type K Y/K H /K X Specifications and Test M ethods Continued from the preceding page. Continued on the following page. Apply the rated voltage for 500–12 hrs. at 40–2°C in 90 to 95% relative hum idity. Post-treatm ent: C apacitor should be stored for 1 to 2 hrs. at room condition.*

13 Humidity

Appearance N o m arked defect I.R. 3000M Ω m in. D.F. Q Capacitance Change Dielectric Strength Per Item 6 Set the capacitor for 500–12 hrs. at 40–2°C in 90 to 95% relative hum idity. Post-treatm ent: C apacitor should be stored for 1 to 2 hrs. at room condition.* Humidity (Under Steady State) Appearance N o m arked defect I.R. 3000M Ω m in. D.F. Q Capacitance Change Dielectric Strength Per Item 6 The capacitor should be firm ly soldered to the supporting lead w ire and vibrated at a frequency range of 10 to 55H z, 1.5m m in total am plitude, w ith about a 1-m inute rate of vibration change from 10H z to 55H z and back to 10H z. Apply for a total of 6 hrs., 2 hrs. each in 3 m utually perpendicular directions.

11 Vibration

Appearance N o m arked defect Capacitance W ithin the specified tolerance D.F. Q First the capacitor should be stored at 120+0/-5°C for 60+0/-5 sec. Then, as in the figure, the lead w ires should be im m ersed in solder of 260+0/-5°C up to 1.5 to 2.0m m from the root of term inal for 7.5+0/-1 sec. Pre-treatm ent: C apacitor should be stored at 85–2°C for 1 hr., then placed at room condition* for 24–2 hrs. before initial m easurem ents. Post-treatm ent: C apacitor should be stored for 1 to 2 hrs. at room condition.* Soldering Effect (On-Preheat) Appearance N o m arked defect I.R. 1000M Ω m in. Capacitance Change W ithin –10% Dielectric Strength Per Item 6 As show n in the figure, the lead w ires should be im m ersed in solder of 350–10°C or 260–5°C up to 1.5 to 2.0m m from the root of term inal for 3.5–0.5 sec. (10–1 sec. for 260–5°C ). Pre-treatm ent: C apacitor should be stored at 85–2°C for 1 hr., then placed at room condition* for 24–2 hrs. before initial m easurem ents. Post-treatm ent: C apacitor should be stored for 1 to 2 hrs. at room condition.* Soldering Effect (Non-Preheat) Appearance N o m arked defect I.R. 1000M Ω m in. Capacitance Change W ithin –10% Dielectric Strength Per Item 6 Char. Specifications D .F.V2.5% D .F.V5.0% Q U400+20C * (C F30pF) Q U1000 (C U30pF) B, E F SL Char. Capacitance Change W ithin –10% W ithin –15% W ithin – 5% B E, F SL Char. Capacitance Change W ithin –10% W ithin –15% W ithin – 5% B E, F SL Char. Specifications D .F.V5.0% D .F.V7.5% Q U275+5/2C * (C F30pF) Q U350 (C U30pF) B, E F SL Char. Specifications D .F.V5.0% D .F.V7.5% Q U275+5/2C * (C F30pF) Q U350 (C U30pF) B, E F SL "C " expresses nom inal capacitance value (pF). "R oom condition" Tem perature: 15 to 35°C , R elative hum idity: 45 to 75% , Atm ospheric pressure: 86 to 106kPa No. Test MethodSpecificationsItem /,/, /,/, /,/, /,/,/,/, /,/,/,/,/,/, Therm al Screen C apacitor 1.5 to 2.0m m M olten Solder /,/, /,/, /,/, /,/, /,/,/,/, /,/,/,/,/,/, Therm al Screen C apacitor 1.5 to 2.0m m M olten Solder Type K Y/K H /K X Specifications and Test M ethods !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

C 85E.pdf Jul.13,2011 Safety Standard C ertified Type K Y/K H /K X Specifications and Test M ethods Continued from the preceding page. Cycle Time (sec.) 30 m ax. 60 m ax. 1 to 4 Applied Voltage AC 425V(r.m .s.), except that once each hour the voltage Continued on the following page. "R oom condition" Tem perature: 15 to 35°C , R elative hum idity: 45 to 75% , Atm ospheric pressure: 86 to 106kPa The capacitor should be individually w rapped in at least one but not m ore than tw o com plete layers of cheesecloth. The capacitor should be subjected to 20 discharges. The interval betw een successive discharges should be 5 sec. The U AC should be m aintained for 2 m in. after the last discharge. C 1,2 : 1µF–10% C 3 : 0.033µF–5% 10kV L1 to 4 : 1.5m H –20% 16A R od core choke C t : 3µF–5% 10kV R : 100Ω –2% C x : C apacitor under test U AC : U R –5% F : Fuse, R ated 10A U R : R ated Voltage U t : Voltage applied to C t 17 Active Flammability The cheesecloth should not be on fire. As show n in the figure at right, fix the body of the capacitor and apply a tensile w eight gradually to each lead w ire in the radial direction of the capacitor up to 10N and keep it for 10–1 sec.16 Robustness of Terminations Tensile Lead w ire should not be cut off. C apacitor should not be broken. Bending Each lead w ire should be subjected to 5N of w eight and bent 90° at the point of egress, in one direction, then returned to its original position and bent 90° in the opposite direction at the rate of one bend in 2 to 3 sec. The capacitor should be subjected to applied flam e for 15 sec. and then rem oved for 15 sec. until 5 cycles are com pleted.

15 Flame Test

The capacitor flam e extinguishes as follow s. Im pulse Voltage Each individual capacitor should be subjected to a 5kV (Type KX: 8kV) im pulses for three tim es. Then the capacitors are applied to life test. Front tim e (T1) =1.2µs=1.67T Tim e to half-value (T2) =50µs Apply a voltage from Table 4 for 1000 hrs. at 125+2/-0°C , and relative hum idity of 50% m ax. <Table 4> Post-treatm ent: C apacitor should be stored for 1 to 2 hrs. at room condition.*

14 Life

Appearance N o m arked defect I.R. 3000M Ω m in. Capacitance Change W ithin –20% Dielectric Strength Per Item 6 No. Test MethodSpecificationsItem U x 5kV tim e W C apacitor Flam e76 20° 38 127 G as Burner: Inside D ia. 9.5 (in m m ) T 100 (% ) t U tC tC xC 3C 2 L2 R C 1 S2Tr U AC F O scilloscope Type K Y/K H /K X Specifications and Test M ethods !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

C 85E.pdf Jul.13,2011 Safety Standard C ertified Type K Y/K H /K X Specifications and Test M ethods Continued from the preceding page. Char. Capacitance Change W ithin –10% W ithin –20% W ithin – 5% B E, F SL Char. Specifications D .F.V5.0% D .F.V7.5% Q U275+5/2C * (C F30pF) Q U350 (C U30pF) B, E F SL Step Temperature (ºC) -25+0/-3 R oom tem p. 125+3/-0 R oom tem p. Time (min) Step Temperature (ºC) 65+5/-0 0–3 Time (min) Immersion Water C lean w ater Salt w ater "C " expresses nom inal capacitance value (pF). "R oom condition" Tem perature: 15 to 35°C , R elative hum idity: 45 to 75% , Atm ospheric pressure: 86 to 106kPa The capacitor should be subjected to 5 tem perature cycles, then consecutively to 2 im m ersion cycles. <Tem perature C ycle> C ycle tim e: 5 cycles <Im m ersion C ycle> C ycle tim e: 2 cycles Pre-treatm ent: C apacitor should be stored at 85–2˚C for 1 hr., then placed at room condition* for 24–2 hrs. Post-treatm ent: C apacitor should be stored for 24–2 hrs. at room condition.* Temperature and Immersion Cycle Appearance N o m arked defect I.R. 3000M Ω m in. D.F. Q Capacitance Change Dielectric Strength Per Item 6 The capacitor under test should be held in the flam e in the position that best prom otes burning. Each specim en should only be exposed once to the flam e. Tim e of exposure to flam e: 30 sec. Length of flam e : 12–1m m G as burner : Length 35m m m in. Inside D ia. 0.5–0.1m m O utside D ia. 0.9m m m ax. G as : Butane gas Purity 95% m in.18 Passive Flammability The burning tim e should not exceed 30 sec. The tissue paper should not ignite. No. Test MethodSpecificationsItem About 8m m 200T5m m Test Specim en Tissue About 10m m Thick Board 45° Type K Y/K H /K X Specifications and Test M ethods !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

C 85E.pdf Jul.13,2011 !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Safety Standard Certified Ceramic Capacitors D EJ Series B ased on the Electrical A ppliance and M aterial Safety Law of Japan n Features 1. This type is based on the electrical appliance and m aterial safety law of Japan (separated table 4). 2. C oated w ith flam e-retardant epoxy resin (conform ing to U L94V-0 standard). Please contact us w hen a halogen-free product* is necessary. * C l=900ppm m ax., Br=900ppm m ax. and C l+Br=1500ppm m ax. 3. Taping available for autom atic insertion. n Applications Ideal for use on AC line filters and prim ary-secondary coupling for sw itching pow er supplies and AC adapters. D o not use these products in any autom otive pow er train or safety equipm ent including battery chargers for electric vehicles and plug-in hybrids. O nly M urata products clearly stipulated as "for Autom otive use" on its catalog can be used for autom obile applications such as pow er train and safety equipm ent. Lead Code Coating Extension e C 3 U p to the end of crim p 3.0 m ax. (in m m ) ø d 0.6–0.05 0.6–0.05 Style Fig. 1 Fig. 2 D m ax. T m ax.T m ax. <Fig. 1> <Fig. 2> 3.0 m ax. 25.0 m in. e ø d 25.0 m in. F–1.0 [Bulk] Vertical Crimp Long (A3) Straight Long (C3) D m ax. T m ax.T m ax. <Fig. 1> <Fig. 2> 3.0 m ax. 5.0–1.0 F–0.8 e ø d 5.0–1.0 Lead Code Coating Extension e D 3 U p to the end of crim p 3.0 m ax. (in m m ) ø d 0.6–0.05 0.6–0.05 Style Fig. 1 Fig. 2 [Bulk] Vertical Crimp Short (B3) Straight Short (D3) n Marking Temp. Char. Nominal Body Diameter Manufactured Date Code Abbreviation E, F Manufacturer's Identification Rated Voltage M arked w ith code Capacitance Tolerance M arked w ith code Nominal Capacitance ø 9-11mm ø 7-8mm M arked w ith 3 figures 102Z 250~ M arked w ith (om itted for nom inal body diam eter ø8m m and under) 332Z 250~ Part Number AC Rated Voltage (Vac) Temp. Char. Capacitance (pF) Body Dia. D (mm) Lead Spacing F (mm) Body Thickness T (mm) Lead Package Long Bulk Lead Package Short Bulk Lead Package Taping (1) Lead Package Taping (2) D EJE3E2102Zppp 250 E 1000 +80/-20% 7 max. 7.5 4.0 max. C3B D3B N2A P3A D EJE3E2222Zppp 250 E 2200 +80/-20% 8 max. 7.5 4.0 max. A3B B3B N2A N3A D EJE3E2332Zppp 250 E 3300 +80/-20% 9 max. 7.5 4.0 max. A3B B3B N2A N3A D EJE3E2472Zppp 250 E 4700 +80/-20% 11 max. 7.5 4.0 max. A3B B3B N2A N3A D EJF3E2472Zppp 250 F 4700 +80/-20% 8 max. 7.5 4.0 max. A3B B3B N2A N3A D EJF3E2103Zppp 250 F 10000 +80/-20% 11 max. 7.5 4.0 max. A3B B3B N2A N3A Three blank colum ns are filled w ith the lead and packaging codes. Please refer to the 3 colum ns on the right for the appropriate code. Taping (1): Lead spacing F=5.0m m , Taping (2): Lead spacing F=7.5m m .

C 85E.pdf Jul.13,2011 D EJ Series (W hich M eet Japanese Law ) Specifications and Test M ethods Char. Specifications D .F.V2.5% D .F.V5.0% E F Char. Capacitance Change W ithin +20 –55% W ithin +30 –80% E F Step Temperature (ºC) 20–2 -25–2 20–2 85–2 20–2 Cd Vs 0.001µF D C 10kV Continued on the following page. The lead w ire of a capacitor should be dipped into m olten solder for 2–0.5 sec. The depth of im m ersion is up to about 1.5 to 2.0m m from the root of lead w ires. Tem p. of solder: Lead Free Solder (Sn-3Ag-0.5C u) 245–5°C H 63 Eutectic Solder 235–5°C

9 Solderability of Leads

Lead w ire should be soldered w ith uniform coating on the axial direction over 3/4 of the circum ferential direction. As in Figure 1, discharge is m ade 50 tim es at 5 sec. intervals from the capacitor (C d) charged at D C voltage of specified. Fig.1 C t: C apacitor under test R 2: 100M Ω S: H igh-voltage sw itch R 3: Surge resistance R 1: 1000Ω

8 Discharge

Appearance N o m arked defect I.R. 1000M Ω m in. Dielectric Strength Per Item 6 The capacitance m easurem ent should be m ade at each step specified in Table 1. <Table 1>

7 Temperature Characteristics

The capacitor should not be dam aged w hen AC 1500V(r.m .s.) are applied betw een the lead w ires for 60 sec. First, the term inals of the capacitor should be connected together. Then, as show n in the figure at right, the capacitor should be im m ersed into 10% salt solution up to a position of about 3 to 4m m apart from the term inals. Finally, AC 1500V(r.m .s.) is applied for 60 sec. betw een the capacitor lead w ires and electrode plate. The insulation resistance should be m easured w ith The dissipation factor should be m easured at 20˚C w ith (D.F.) The capacitance should be m easured at 20˚C w ith 1–0.1kH z and AC 5V(r.m .s.) m ax.3 Capacitance W ithin specified tolerance The capacitor should be visually inspected.2 Marking To be easily legible The capacitor should be visually inspected for evidence of defect. D im ensions should be m easured w ith slide calipers. specified range. No. Test MethodSpecificationsItem Operating Temperature Range: -25 to +85°C Vs R 3 R 1 R 2 S C d C t About 3 to 4m m Electrode Plate 10% Salt Solution D EJ Series Specifications and Test M ethods !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

C 85E.pdf Jul.13,2011 D EJ Series (W hich M eet Japanese Law ) Specifications and Test M ethods Continued from the preceding page. Char. Specifications D .F.V5.0% D .F.V7.5% E F Char. Capacitance Change W ithin –20% W ithin –30% E F Continued on the following page. "R oom condition" Tem perature: 15 to 35°C , R elative hum idity: 45 to 75% , Atm ospheric pressure: 86 to 106kPa The capacitor should be subjected to 40–2˚C , relative hum idity of 90 to 98% for 8 hrs., and then rem oved in room tem perature for 16 hrs. until 5 cycles are com pleted. Pre-treatm ent: C apacitor should be stored at 85–2˚C for 1 hr., then placed at room condition* for 24–2 hrs. before initial m easurem ents. Post-treatm ent: C apacitor should be stored for 1 to 2 hrs. at room condition.*

15 Humidity

Appearance N o m arked defect I.R. 1000M Ω m in. D.F. Capacitance Change Dielectric Strength Per Item 6 Char. Specifications D .F.V5.0% D .F.V7.5% E F Char. Capacitance Change W ithin –20% W ithin –30% E F Char. Specifications D .F.V2.5% D .F.V5.0% E F Set the capacitor for 500–12 hrs. at 40–2˚C in 90 to 95% relative hum idity. Pre-treatm ent: C apacitor should be stored at 85–2˚C for 1 hr., then placed at room condition* for 24–2 hrs. before initial m easurem ents. Post-treatm ent: C apacitor should be stored for 1 to 2 hrs. at room condition.* Humidity (Under Steady State) Appearance N o m arked defect I.R. 1000M Ω m in. D.F. Capacitance Change Dielectric Strength Per Item 6 The capacitor should be im m ersed into a isopropyl alcohol for 30–5 sec.13 Solvent Resistance Appearance N o m arked defect The capacitor should be firm ly soldered to the supporting lead w ire and vibrated at a frequency range of 10 to 55H z, 1.5m m in total am plitude, w ith about a 1-m inute rate of vibration change from 10H z to 55H z and back to 10H z. Apply for a total of 6 hrs., 2 hrs. each in 3 m utually perpendicular directions.

12 Vibration

Appearance N o m arked defect Capacitance W ithin the specified tolerance D.F. First the capacitor should be stored at 120+0/-5°C for 60+0/-5 sec. Then, as in the figure, the lead w ires should be im m ersed in solder of 260+0/-5°C up to 1.5 to 2.0m m from the root of term inal for 7.5+0/-1 sec. Pre-treatm ent: C apacitor should be stored at 85–2˚C for 1 hr., then placed at room condition* for 24–2 hrs. before initial m easurem ents. Post-treatm ent: C apacitor should be stored for 4 to 24 hrs. at room condition.* Soldering Effect (On-Preheat) Appearance N o m arked defect I.R. 1000M Ω m in. Dielectric Strength Per Item 6 As show n in the figure, the lead w ires should be im m ersed in solder of 350–10˚C up to 1.5 to 2.0m m from the root of term inal for 3.5–0.5 sec. Pre-treatm ent: C apacitor should be stored at 85–2˚C for 1 hr., then placed at room condition* for 24–2 hrs. before initial m easurem ents. Post-treatm ent: C apacitor should be stored for 4 to 24 hrs. at room condition.* Soldering Effect (Non-Preheat) Appearance N o m arked defect I.R. 1000M Ω m in. Dielectric Strength Per Item 6 No. Test MethodSpecificationsItem /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, Therm al Screen C apacitor 1.5 to 2.0m m M olten Solder /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, Therm al Screen C apacitor 1.5 to 2.0m m M olten Solder D EJ Series Specifications and Test M ethods !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

C 85E.pdf Jul.13,2011 D EJ Series (W hich M eet Japanese Law ) Specifications and Test M ethods Char. Specifications D .F.V5.0% D .F.V7.5% E F Cycle Time (sec.) 15 m ax. 60 m ax. 1 to 2 Char. Capacitance Change W ithin –20% W ithin –30% E F Char. Specifications D .F.V5.0% D .F.V7.5% E F Char. Capacitance Change W ithin –20% W ithin –30% E F Step Temperature (ºC) -25+0/-3 R oom tem p. 85+3/-0 R oom tem p. Time (min) Step Temperature (ºC) 65+5/-0 0–3 Time (min) Immersion Water C lean w ater Salt w ater Applied Voltage AC 500V(r.m .s.), except that once each hour the voltage "R oom condition" Tem perature: 15 to 35°C , R elative hum idity: 45 to 75% , Atm ospheric pressure: 86 to 106kPa The capacitor should be subjected to 5 tem perature cycles, then consecutively to 2 im m ersion cycles. <Tem perature C ycle> C ycle tim e: 5 cycles <Im m ersion C ycle> C ycle tim e: 2 cycles Pre-treatm ent: C apacitor should be stored at 85–2˚C for 1 hr., then placed at room condition* for 24–2 hrs. Post-treatm ent: C apacitor should be stored for 4 to 24 hrs. at room condition.* Temperature and Immersion Cycle Appearance N o m arked defect I.R. 1000M Ω m in. D.F. Capacitance Change Dielectric Strength Per Item 6 As show n in the figure at right, fix the body of the capacitor, apply a tensile w eight gradually to each lead w ire in the radial direction of the capacitor up to 10N and keep it for 10–1 sec. Robustness of Terminations Tensile Lead w ire should not be cut off. C apacitor should not be broken. Bending Each lead w ire should be subjected to 5N of w eight and bent 90° at the point of egress, in one direction, then returned to its original position and bent 90° in the opposite direction at the rate of one bend in 2 to 3 sec. The capacitor should be subjected to applied flam e for 15 sec. and then rem oved for 15 sec. until 3 cycles are com pleted.18 Flame Test The capacitor flam e discontinued as follow s. Apply a voltage from Table 2 for 1500 hrs. at 85–2˚C , relative hum idity 50% m ax. <Table 2> Pre-treatm ent: C apacitor should be stored at 85–2˚C for 1 hr., then placed at room condition* for 24–2 hrs. before initial m easurem ents. Post-treatm ent: C apacitor should be stored for 4 to 24 hrs. at room condition.*

17 Life

Appearance N o m arked defect Dielectric Strength Per Item 6 Apply the rated voltage for 500–12 hrs. at 40–2˚C in 90 to 95% relative hum idity. Pre-treatm ent: C apacitor should be stored at 85–2˚C for 1 hr., then placed at room condition* for 24–2 hrs. before initial m easurem ents. Post-treatm ent: C apacitor should be stored for 1 to 2 hrs. at room condition.*

16 Humidity

Appearance N o m arked defect I.R. 1000M Ω m in. D.F. Capacitance Change Dielectric Strength Per Item 6 No. Test MethodSpecificationsItem Continued from the preceding page. C apacitor G as Burner: Inside D ia. 9.5 (in m m ) Flam e76 20° 38 127 W I.R. 1000M Ω m in. Capacitance Change Char. Capacitance Change W ithin –20% W ithin –30% E F D EJ Series Specifications and Test M ethods !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

C 85E.pdf Jul.13,2011 Safety C ertified C eram ic C apacitors C haracteristics D ata (Typical Exam ple) !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. n Capacitance - Temperature Characteristics B B E Tem perature (°C ) -40 -20 -40 -60 -80 -100 -20 0 20 40 60 80 100 120 140 C ap. C hange (% ) E F F SL SL n Insertion Loss - Frequency Characteristics Type KY 1 10 100 1000 Frequency (M H z) Insertion Loss (dB) Type KY Signal pow er: 1m W AC 240V(r.m .s.) / 60H z is applied on the capacitor. (1) D E2B3KY101KA2BM 01 (2) D E2B3KY221KA2BM 01 (3) D E2B3KY471KA2BM 01 (4) D E2E3KY102M A2BM 01 (5) D E2E3KY222M A2BM 01 (6) D E2E3KY472M A2BM 01 (7) D E2F3KY103M A3BM 02 (6) (7) (5) (4) (3) (2) (1) Type KH 1 10 100 1000 Frequency (M H z) Insertion Loss (dB) Type KH Signal pow er: 1m W AC 240V(r.m .s.) / 60H z is applied on the capacitor. (1) D E2B3KH 101KA3B (2) D E2B3KH 221KA3B (3) D E2B3KH 471KA3B (4) D E2E3KH 102M A3B (5) D E2E3KH 222M A3B (6) D E2E3KH 472M A3B (7) D E2F3KH 103M A3B (7) (6) (5) (4)(3) (2) (1) Type KX Small Size 1 10 100 1000 Frequency (M H z) Insertion Loss (dB) Type KX Sm all Size Signal pow er: 1m W AC 240V(r.m .s.) / 60H z is applied on the capacitor. (1) D E1B3KX101KA4BL01 (2) D E1B3KX221KA4BL01 (3) D E1B3KX471KA4BL01 (4) D E1E3KX102M A4BL01 (5) D E1E3KX222M A4BL01 (6) D E1E3KX472M A4BL01 (6) (5) (4) (3) (1) (2) Type KX 1 10 100 1000 Frequency (M H z) Insertion Loss (dB) Type KX Signal pow er: 1m W AC 240V(r.m .s.) / 60H z is applied on the capacitor. (1) D E1B3KX101KA5B (2) D E1B3KX221KA5B (3) D E1B3KX471KA5B (4) D E1E3KX102M A5BA01 (5) D E1E3KX222M A5BA01 (6) D E1E3KX472M A5BA01 (6) (5) (4) (3) (2) (1)

C 85E.pdf Jul.13,2011 Safety C ertified C eram ic C apacitors C haracteristics D ata (Typical Exam ple) !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. n Leakage Current Characteristics 1.0 AC voltage : 60H z Tem perature : 25°C Type KY (B char.) 0.8 0.6 0.4 0.2 0.0 0 1000 2000 3000 AC voltage [V(r.m .s.)] Leakage current [m A(r.m .s.)] DE2B3KY471KA2BM 01 D E2B3KY221KA2BM 01 D E2B3KY101KA2BM 01 Type KY (E,F char.) 0.0 1.0 2.0 3.0 4.0 5.0 6.0 0 1000 2000 3000 AC voltage [V(r.m .s.)] AC voltage : 60H z Tem perature : 25°C DE2F3KY103M A3BM 02 D E2E3KY472M A2BM 01 D E2E3KY222M A2BM 01 D E2E3KY102M A2BM 01 Leakage current [m A(r.m .s.)] 1.0 6.0 5.0 4.0 3.0 2.0 1.0 0.0 AC voltage : 60H z Tem perature : 25°C AC voltage : 60H z Tem perature : 25°C Type KH (B char.) Type KH (E, F char.) 0.8 0.6 0.4 0.2 0.0 0 1000 2000 3000 0 1000 2000 3000 Leakage current [m A(r.m .s.)] Leakage current [m A(r.m .s.)] DE2B3KH471KA3B DE2B3KH221KA3B D E2B3KH 101KA3B DE2F3KH103M A3B D E2E3KH 472M A3B D E2E3KH 222M A3B D E2E3KH 102M A3B 0 1000 2000 3000 4000 1.0 0.8 0.6 0.4 0.2 0.0 0 1000 2000 3000 4000 AC voltage : 60H z Tem perature : 25°C AC voltage : 60H z Tem perature : 25°C Type KX Sm all Size (B char.) Type KX Sm all Size (E char.) Leakage current [m A(r.m .s.)] Leakage current [m A(r.m .s.)] 4.0 3.0 2.0 1.0 0.0 D E1B3KX101KA4BL01 DE1B3KX221KA4BL01 D E1B3KX471KA4BL01 D E1E3KX102M A4BL01 D E1E3KX222M A4BL01 D E1E3KX472M A4BL01 Continued on the following page.

C 85E.pdf Jul.13,2011 Safety C ertified C eram ic C apacitors C haracteristics D ata (Typical Exam ple) !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Continued from the preceding page. 6.0 5.0 4.0 3.0 2.0 1.0 0.0 0 1000 2000 3000 4000 1.2 1.0 0.8 0.6 0.4 0.2 0.0 0 1000 2000 3000 4000 AC voltage : 60H z Tem perature : 25°C AC voltage : 60H z Tem perature : 25°C Type KX (B char.) Type KX (E char.) Leakage current [m A(r.m .s.)] Leakage current [m A(r.m .s.)] DE1B3KX471KA5B DE1B3KX221KA5B D E1B3KX101KA5B DE1E3KX472M A5BA01 D E1E3KX222M A5BA01 D E1E3KX102M A5BA01

C 85E.pdf Jul.13,2011 Item Pitch of component Pitch of sprocket hole Lead spacing Length from hole center to component center Length from hole center to lead Body diameter Deviation along tape, left or right Carrier tape width Position of sprocket hole Lead distance between reference and bottom planes Protrusion length Diameter of sprocket hole Lead diameter Total tape thickness Total thickness, tape and lead wire Body thickness Portion to cut in case of defect Hold down tape width Hold down tape position Coating extension on lead Deviation across tape, front Deviation across tape, rear P F D W W 1 H 0 H r øD 0 ød T L W 0 W 2 e ∆h1 ∆h2 12.7–1.0 12.7–0.3 5.0 6.35–1.3 3.85–0.7 15.0–2.0 15.0–0.3 7.5–1.0 7.5–1.5 3.75–1.0 0–2.00–1.0 30.0–2.0 See the individual product specifications. 18.0–0.5 9.0–0.5 +0.5 to -1.0 4.0–0.1 0.6–0.3 1.5 m ax. See the individual product specifications. 11.0 11.5 m in. 1.5–1.5 20.0 25.4–2.0 12.7–0.3 10.0–1.0 7.7–1.5 2.0 m ax.1.0 m ax. (in m m ) N2 N3 P3 N7 N4 N5Code +0.8 –0.2 +1.5 –1.0 18.0 –+2.0 –0 18.0 +2.0 –1.0 12.7m m pitch / lead spacing 5m m taping Vertical crim p type (Lead C ode: N 2) 15m m pitch / lead spacing 7.5m m taping Vertical crim p type (Lead C ode: N 3) 0.6–0.05 30m m pitch / lead spacing 7.5m m taping Vertical crim p type (Lead C ode: N 7) 25.4m m pitch / lead spacing 10.0m m taping Vertical crim p type (Lead C ode: N 4, N 5) L P D F ød øD 0R W 0 W 1 W e W 2 H 0 L P D ∆S F ød øD 0R W 0 W 1 W H 0 e W 2 L P D ∆S F ød øD 0R W 0 W 2 W 1 W e H 0 15m m pitch / lead spacing 7.5m m taping Straight type (Lead C ode: P3) L P D ∆S F ød øD 0R W 0 W 2 W 1 W e H L P D F ød øD 0 R W 0 W 1 W e W 2 H 0 T m ax. ∆h1 ∆h2O M arked side t2 t1 0.6 +0.1 –0.05 C ontinued on the follow ing page. U p to the end of crim p U p to the end of crim p 3.0 m ax. Lead C ode N 2, N 3, N 4, N 7 4.0 m ax. Lead C ode N 5 Lead C ode H 0 H 0 Taping Specifications 3.0 m ax. Safety C ertified C eram ic C apacitors Packaging !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

C 85E.pdf Jul.13,2011 TapingBulk Polyethylene Bag Am m o Pack C ontinued from the preceding page. Packaging Styles n Minimum Quantity (Order in Sets Only) * Lead Spacing F=5.0m m (C ode: A2): 500pcs. Type KY Type KH Type KX (Sm all Size) D EJ Series Type KX 8 to 11 12 to 14 15, 16 8, 9 12 to 15 Body Dia. D (mm) 250 * 250 200 100 250 100 100 Lead Code Ap, Cp 500 500 250 200 500 250 200 Lead Code Bp, Dp Long Short [Bulk] (pcs./Bag) Type KY Type KH Type KX (Sm all Size) Type KX D EJ Series 1,000 1,500 900 900 1,000 Lead Code N2 N3, P3 N4, N5, N7 400 500 500 [Taping] (pcs./Am m o Pack) Safety C ertified C eram ic C apacitors Packaging !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

C 85E.pdf Jul.13,2011 W hen D C -rated capacitors are to be used in AC or ripple current circuits, be sure to m aintain the Vp-p value of the applied voltage or the Vo-p that contains D C bias w ithin the rated voltage range. W hen the voltage is applied to the circuit, starting or stopping m ay generate irregular voltage for a transit period because of resonance or sw itching. Be sure to use a capacitor w ith a rated voltage range that includes these irregular voltages. Voltage Positional Measurement DC Voltage DC+AC Voltage AC Voltage Pulse Voltage (1) Pulse Voltage (2) V0-p V0-p Vp-p Vp-p Vp-p 1. Operating Voltage Keep the surface tem perature of a capacitor below the upper lim it of its rated operating tem perature range. Be sure to take into account the heat generated by the capacitor itself. W hen the capacitor is used in a high- frequency current, pulse current or sim ilar current, it m ay have self-generated heat due to dielectric loss. Applied voltage load should be such that self-generated heat is w ithin 20°C under the condition w here the capacitor is subjected to an atm ospheric tem perature of 25°C . W hen m easuring, use a therm ocouple of sm all therm al capacity-K of ø0.1m m under conditions w here the capacitor is not affected by radiant heat from other com ponents or w ind from surroundings. Excessive heat m ay lead to deterioration of the capacitor's characteristics and reliability. (N ever attem pt to perform m easurem ent w ith the cooling fan running. O therw ise, accurate m easurem ent cannot be ensured.) 2. Operating Temperature and Self-generated Heat (Apply to B/E/F Char.) Test equipm ent for AC w ithstanding voltage should be used w ith the perform ance of the w ave sim ilar to 50/60H z sine w ave. If the distorted sine w ave or overload exceeding the specified voltage value is applied, a defect m ay be caused. 3. Test Condition for Withstanding Voltage (1) Test Equipm ent Continued on the following page. n !Caution (Rating) Safety C ertified C eram ic C apacitors !C aution !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

C 85E.pdf Jul.13,2011 Continued from the preceding page. W hen the w ithstanding voltage is applied, the capacitor's lead or term inal should be firm ly connected to the output of the w ithstanding voltage test equipm ent, and then the voltage should be raised from near zero to the test voltage. If the test voltage w ithout the raise from near zero voltage w ould be applied directly to capacitor, test voltage should be applied w ith the zero cross.* At the end of the test tim e, the test voltage should be reduced to near zero, and then capacitor's lead or term inal should be taken off the output of the w ithstanding voltage test equipm ent. If the test voltage w ithout the raise from near zero voltage w ould be applied directly to capacitor, the surge voltage m ay rise, and therefore, a defect m ay be caused. *ZER O C R O SS is the point w here voltage sine w ave passes 0V. See the figure at right. (2) Voltage Applied M ethod zero cross Voltage sine w ave W hen the capacitor is broken, failure m ay result in a short circuit. Be sure to provide an appropriate fail-safe function like a fuse on your product if failure could result in an electric shock, fire or fum ing. FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY RESULT, WORST CASE, IN A SHORT CIRCUIT AND CAUSE FUMING OR PARTIAL DISPERSION WHEN THE PRODUCT IS USED. 4. Fail-Safe Safety C ertified C eram ic C apacitors !C aution !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

C 85E.pdf Jul.13,2011 Safety C ertified C eram ic C apacitors !C aution !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. n !Caution (Storage and Operating Condition) n !Caution (Soldering and Mounting) n !Caution (Handling) Vibration and Im pact D o not expose a capacitor or its lead w ires to excessive shock or vibration during use. Excessive shock or vibration m ay cause fatigue destruction of lead w ires m ounted on the circuit board. Please take m easures to hold a capacitor on the circuit boards by adhesive, m olding resin or another coating. Please confirm there is no influence of holding m easures on the product w ith the intended equipm ent. FAILU R E TO FO LLO W TH E ABO VE C AU TIO N S M AY R ESU LT, W O R ST C ASE, IN A SH O R T C IR C U IT AN D C AU SE FU M IN G O R PAR TIAL D ISPER SIO N W H EN TH E PR O D U C T IS U SED . 1. Vibration and Im pact D o not expose a capacitor or its lead w ires to excessive shock or vibration during use. Excessive shock or vibration m ay cause fatigue destruction of lead w ires m ounted on the circuit board. Please take m easures to hold a capacitor on the circuit boards by adhesive, m olding resin or another coating. Please confirm there is no influence of holding m easures on the product w ith the intended equipm ent. 2. Soldering W hen soldering this product to a PC B/PW B, do not exceed the solder heat resistance specifications of the capacitor. Subjecting this product to excessive heating could m elt the internal junction solder and m ay result in therm al shocks that can crack the ceram ic elem ent. Soldering the capacitor w ith a soldering iron should be perform ed in the follow ing conditions. Tem perature of iron-tip: 400 degrees C . m ax. Soldering iron w attage: 50W m ax. Soldering tim e: 3.5 sec. m ax. 3. Bonding, R esin M olding and C oating For bonding, m olding or coating this product, verify that these processes do not affect the quality of the capacitor by testing the perform ance of the bonded, m olded or coated product in the intended equipm ent. W hen the am ount of applications, dryness/hardening conditions of adhesives and m olding resins containing organic solvents (ethyl acetate, m ethyl ethyl ketone, toluene, etc). are unsuitable, the outer coating resin of a capacitor is dam aged by the organic solvents and it m ay result, w orst case, in a short circuit. The variation in thickness of adhesive, m olding resin or coating m ay cause outer coating resin cracking and/or ceram ic elem ent cracking of a capacitor in a tem perature cycling. 4. Treatm ent after Bonding, R esin M olding and C oating W hen the outer coating is hot (over 100 degrees C .) after soldering, it becom es soft and fragile. Therefore, please be careful not to give it m echanical stress. FAILU R E TO FO LLO W TH E ABO VE C AU TIO N S M AY R ESU LT, W O R ST C ASE, IN A SH O R T C IR C U IT AN D C AU SE FU M IN G O R PAR TIAL D ISPER SIO N W H EN TH E PR O D U C T IS U SED . O perating and Storage Environm ent The insulating coating of capacitors does not form a perfect seal; therefore, do not use or store capacitors in a corrosive atm osphere, especially w here chloride gas, sulfide gas, acid, alkali, salt or the like are present. Also, avoid exposure to m oisture. Before cleaning, bonding, or m olding this product, verify that these processes do not affect product quality by testing the perform ance of a cleaned, bonded or m olded product in the intended equipm ent. Store the capacitors w here the tem perature and relative hum idity do not exceed -10 to 40 degrees centigrade and 15 to 85% . U se capacitors w ithin 6 m onths after delivery. C heck the solderability after 6 m onths or m ore. FAILU R E TO FO LLO W TH E ABO VE C AU TIO N S M AY R ESU LT, W O R ST C ASE, IN A SH O R T C IR C U IT AN D C AU SE FU M IN G O R PAR TIAL D ISPER SIO N W H EN TH E PR O D U C T IS U SED .

C 85E.pdf Jul.13,2011 Safety C ertified C eram ic C apacitors N otice !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. n Notice (Soldering and Mounting) C leaning (ultrasonic cleaning) To perform ultrasonic cleaning, observe the follow ing conditions. R inse bath capacity: O utput of 20 w atts per liter or less. R insing tim e: 5 m in. m axim um . D o not vibrate the PC B/PW B directly. Excessive ultrasonic cleaning m ay lead to fatigue destruction of the lead w ires. n Notice (Rating) 1. C apacitance C hange of C apacitors (1) For SL char. C apacitance m ight change a little depending on a surrounding tem perature or an applied voltage. Please contact us if you use a strict constant tim e circuit. (2) For B/E/F char. C apacitors have an aging characteristic, w hereby the capacitor continually decreases its capacitance slightly if the capacitor is left on for a long tim e. M oreover, capacitance m ight change greatly depending on the surrounding tem perature or an applied voltage. Therefore, it is not likely to be suitable for use in a constant tim e circuit. Please contact us if you need detailed inform ation. 2. Perform ance C heck by Equipm ent Before using a capacitor, check that there is no problem in the equipm ent's perform ance and the specifications. G enerally speaking, C LASS 2 (B/E/F char.) ceram ic capacitors have voltage dependence characteristics and tem perature dependence characteristics in capacitance, so the capacitance value m ay change depending on the operating condition in the equipm ent. Therefore, be sure to confirm the apparatus perform ance of receiving influence in the capacitance value change of a capacitor, such as leakage current and noise suppression characteristic. M oreover, check the surge-proof ability of a capacitor in the equipm ent, if needed, because the surge voltage m ay exceed specific value by the inductance of the circuit.

C 85E.pdf Jul.13,2011 !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. High Voltage Ceramic Capacitors D ES Series (125°C G uaranteed/Low -dissipation Factor/D C 500V-1kV) n Features 1. Low dissipation factor series that can be used for pow er supplies w ith an increased sw itching frequency. 2. The allow able pow er in the 100 to 300kH z band is im proved to approxim ately one and a half tim es that of the D EH series w hile rem aining the sam e size. 3. O perating tem perature range is guaranteed up to 125 degrees C . 4. C oated w ith flam e-retardant epoxy resin (equivalent to U L94V-0 standard). Please contact us w hen a halogen-free product* is necessary. * C l=900ppm m ax., Br=900ppm m ax. and C l+Br=1500ppm m ax. 5. Taping available for autom atic insertion. n Applications Ideal for use on high-frequency pulse circuits such as snubber circuits for sw itching pow er supplies. D o not use these products in any autom otive pow er train or safety equipm ent including battery chargers for electric vehicles and plug-in hybrids. O nly M urata products clearly stipulated as "for Autom otive use" on its catalog can be used for autom obile applications such as pow er train and safety equipm ent. Lead Code Coating Extension e A2, A3 U p to the end of crim p (in m m ) ø d 0.6–0.05 D m ax. T m ax. 3.0 m ax. 25.0 m in. e ø dF–1.0 [Bulk] Vertical Crimp Long (A2,A3) D m ax. T m ax. 3.0 m ax. 3.5–0.5 F–0.8 e ø d 1.0 (in m m ) Lead Code Coating Extension e J2, J3 U p to the end of crim p ø d 0.6–0.05 [Bulk] Vertical Crimp Short (J2,J3) n Marking Nominal Body Diameter DC1kVDC500V ø 6mm ø 7-9mm ø 10-17mm Series Code Temperature Characteristic Nominal Capacitance Capacitance Tolerance Rated Voltage Manufacturer's Identification Manufactured Date Code Abbreviation (S) M arked w ith code M arked w ith 3 figures M arked w ith code (om itted for nom inal body diam eter ø6m m ) M arked w ith code (om itted for D C 500V) M arked w ith (om itted for nom inal body diam eter ø9m m and under) Abbreviation Rated Voltage S D 101 S D 102K S D 222K S D 101 1KV 66 S D 471K 1KV 66 S D 152K 1KV

C 85E.pdf Jul.13,2011 !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. D C haracteristics Part Number DC Rated Voltage (V) Capacitance (pF) Body Dia. D (mm) Lead Spacing F (mm) Body Thickness T (mm) Lead Package Long Bulk Lead Package Short Bulk Lead Package Taping D ESD 32H 101K ppp 500 100 –10% 6 5.0 4.0 A2B J2B N2A D ESD 32H 151K ppp 500 150 –10% 6 5.0 4.0 A2B J2B N2A D ESD 32H 221K ppp 500 220 –10% 6 5.0 4.0 A2B J2B N2A D ESD 32H 331K ppp 500 330 –10% 6 5.0 4.0 A2B J2B N2A D ESD 32H 471K ppp 500 470 –10% 6 5.0 4.0 A2B J2B N2A D ESD 32H 681K ppp 500 680 –10% 6 5.0 4.0 A2B J2B N2A D ESD 32H 102K ppp 500 1000 –10% 8 5.0 4.0 A2B J2B N2A D ESD 32H 152K ppp 500 1500 –10% 9 5.0 4.0 A2B J2B N2A D ESD 32H 222K ppp 500 2200 –10% 10 5.0 4.0 A2B J2B N2A D ESD 32H 332K ppp 500 3300 –10% 12 7.5 4.0 A3B J3B N3A D ESD 32H 472K ppp 500 4700 –10% 14 7.5 4.0 A3B J3B N7A D ESD 33A 101K ppp 1000 100 –10% 6 5.0 4.5 A2B J2B N2A D ESD 33A 151K ppp 1000 150 –10% 6 5.0 4.5 A2B J2B N2A D ESD 33A 221K ppp 1000 220 –10% 6 5.0 4.5 A2B J2B N2A D ESD 33A 331K ppp 1000 330 –10% 6 5.0 4.5 A2B J2B N2A D ESD 33A 471K ppp 1000 470 –10% 7 5.0 4.5 A2B J2B N2A D ESD 33A 681K ppp 1000 680 –10% 8 5.0 4.5 A2B J2B N2A D ESD 33A 102K ppp 1000 1000 –10% 9 5.0 4.5 A2B J2B N2A D ESD 33A 152K ppp 1000 1500 –10% 10 5.0 4.5 A2B J2B N2A D ESD 33A 222K ppp 1000 2200 –10% 12 7.5 4.5 A3B J3B N3A D ESD 33A 332K ppp 1000 3300 –10% 14 7.5 4.5 A3B J3B N7A D ESD 33A 472K ppp 1000 4700 –10% 17 7.5 4.5 A3B J3B N7A Three blank colum ns are filled w ith the lead and packaging codes. Please refer to the three colum ns on the right for the appropriate code.

C 85E.pdf Jul.13,2011 D ES Series (125°C G uaranteed / Low -dissipation Factor / D C 500V-1kV) Specifications and Test M ethods No. Item Operating Temperature Range Specifications -25 to +125°C Test Method

2 Appearance and Dimensions No visible defect, and dimensions are

within specified range. To be easily legible The capacitor should be visually inspected for evidence of defect. Dimensions should be measured with slide calipers. 3 Marking The capacitor should be visually inspected.

4 Dielectric

The capacitor should not be damaged when DC voltage of 200% of the rated voltage (DC1kV) or DC voltage of 250% of the rated voltage (DC500V) is applied between the lead wires for 1 to 5 sec. (Charge/Discharge currentV50mA) The capacitor is placed in the container with metal balls of diameter 1mm so that each lead wire, short circuited, is kept about 2mm off the metal balls as shown in the figure at right, and AC1250V(r.m.s.) <50/60Hz> is applied for 1 to 5 sec. between capacitor lead wires and metal balls. (Charge/Discharge currentV50mA)

5 Insulation

Resistance (I.R.) The insulation resistance should be measured with DC500 ±50V within 60±5 sec. of charging. About 2m m M etal balls 7 Dissipation Factor (D.F.) Between Lead Wires 10000M Ω min. 6 Capacitance The capacitance should be measured at 20°C with 1±0.2kHz and AC5V(r.m.s.) max.Within specified tolerance 0.3% max. The dissipation factor should be measured at 20°C with

8 Temperature Characteristics

The capacitance measurement should be made at each step specified in the Table. Pre-treatment: Capacitor should be stored at 125±3°C for 1 hr., then placed at room condition* for 24±2 hrs. before measurements.

9 Strength of Lead

Lead wire should not be cut off. Capacitor should not be broken. As shown in the figure at right, fix the body of the capacitor and apply a tensile weight gradually to each lead wire in the radial direction of the capacitor up to 10N and keep it for 10±1 sec. Bending Each lead wire should be subjected to 5N of weight and bent 90°at the point of egress, in one direction, then returned to its original position and bent 90°in the opposite direction at the rate of one bend in 2 to 3 sec.

10 Vibration

Appearance No marked defect The capacitor should be firmly soldered to the supporting lead wire and vibrated at a frequency range of 10 to 55Hz, 1.5mm in total amplitude, with about a 1-minute rate of vibration change from 10Hz to 55Hz and back to 10Hz. Apply for a total of 6 hrs., 2 hrs. each in 3 mutually perpendicular directions.

11 Solderability of Leads

Lead wire should be soldered with uniform coating on the axial direction over 3/4 of the circumferential direction. The lead wire of a capacitor should be dipped into a ethanol solution of 25wt% rosin and then into molten solder for 2±0.5 sec. In both cases the depth of dipping is up to about 1.5 to 2mm from the root of lead wires. Temp. of solder: Lead Free Solder (Sn-3Ag-0.5Cu) 245±5°C H63 Eutectic Solder 235±5°C Capacitance Within specified tolerance D.F. 0.3% max. Continued on the following page. Temp. (° C) 2 3 4 5 20±2 -25±3 20±2 125±2 20±2 Step 1 W * "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa

12 Soldering Effect

(Non-Preheat) Appearance Capacitance Change Dielectric Strength (Between Lead Wires) No marked defect Within ±10% Per item 4. The lead wire should be immersed into the melted solder of 350±10°C up to about 1.5 to 2mm from the main body for 3.5±0.5 sec. Pre-treatment: Capacitor should be stored at 125±3°C for 1 hr., then placed at room condition* for 24±2 hrs. before initial measurements. Post-treatment: Capacitor should be stored for 24±2 hrs. at room condition.* Within +20/-30% (Temp. range: -25 to +125°C) D ES Series Specifications and Test M ethods !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

C 85E.pdf Jul.13,2011 D ES Series (125°C G uaranteed / Low -dissipation Factor / D C 500V-1kV) Specifications and Test M ethods No. Item Specifications Test Method

15 Humidity (Under

Steady State) Appearance Capacitance Change D.F. I.R. No marked defect Within ±10% 0.4% max. 1000M Ω min. Set the capacitor for 500+24/-0 hrs. at 40±2°C in 90 to 95% relative humidity. Pre-treatment: Capacitor should be stored at 125±3°C for 1 hr., then placed at room condition* for 24±2 hrs. before initial measurements. Post-treatment: Capacitor should be stored for 1 to 2 hrs. at room condition.* 1000M Ω min. Appearance No marked defect Capacitance Change Within ±10% D.F. I.R. Apply the rated voltage for 500+24/-0 hrs. at 40±2°C in 90 to 95% relative humidity. (Charge/Discharge currentV50mA) Pre-treatment: Capacitor should be stored at 125±3°C for 1 hr., then placed at room condition* for 24±2 hrs. before initial measurements. Post-treatment: Capacitor should be stored for 1 to 2 hrs. at room condition.* * "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa Continued from the preceding page.

14 Temperature

Appearance No marked defect Capacitance Change Within ±10% D.F. 0.4% max. I.R. 1000M Ω min. Dielectric Strength (Between Lead Wires) Per item 4. The capacitor should be subjected to 5 temperature cycles. <Temperature Cycle> Cycle time: 5 cycles Pre-treatment: Capacitor should be stored at 125±3°C for 1 hr., then placed at room condition* for 24±2 hrs. before initial measurements. Post-treatment: Capacitor should be stored for 24±2 hrs. at room condition.* Time (min) -25±3 30 2 Room Temp. 3 3 125±3 30 4 Room Temp. 3 Step Temperature (° C) 2000M Ω min. Appearance No marked defect Capacitance Change Within ±10% D.F. I.R. Apply a DC voltage of 200% of the rated voltage (DC500V) or DC voltage of 150% of the rated voltage (DC1kV) for 1000 +48/-0 hrs. at 125±2°C with a relative humidity of 50% max. (Charge/Discharge currentV50mA) Pre-treatment: Capacitor should be stored at 125±3°C for 1 hr., then placed at room condition* for 24±2 hrs. before initial measurements. Post-treatment: Capacitor should be stored at 125±3°C for 1 hr., then placed at room condition* for 24±2 hrs. 0.6% max. 0.4% max.

13 Soldering Effect

(On-Preheat) Appearance Capacitance Change Dielectric Strength (Between Lead Wires) No marked defect Within ±10% Per item 4. First the capacitor should be stored at 120+0/-5°C for 60+0/-5 sec. Then, as in the figure, the lead wires should be immersed in solder of 260+0/-5°C up to 1.5 to 2.0mm from the root of terminal for 7.5+0/-1 sec. Pre-treatment: Capacitor should be stored at 125±3°C for 1 hr., then placed at room condition* for 24±2 hrs. before initial measurements. Post-treatment: Capacitor should be stored for 24±2 hrs. at room condition.* /, /, /, /, /, /, /, /, /, /, /, /, /, Therm al Screen C apacitor 1.5 to 2.0m m M olten Solder D ES Series Specifications and Test M ethods !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

C 85E.pdf Jul.13,2011 !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. High Voltage Ceramic Capacitors D EH Series (125°C G uaranteed/Low -dissipation Factor/D C 500V-3.15kV) n Features 1. R educed heat dissipation perm itted due to sm all dielectric loss of the ceram ic m aterial. 2. O perating tem perature range is guaranteed up to 125 degrees C . 3. C oated w ith flam e-retardant epoxy resin (equivalent to U L94V-0 standard). Please contact us w hen a halogen-free product* is necessary. * C l=900ppm m ax., Br=900ppm m ax. and C l+Br=1500ppm m ax. 4. Taping available for autom atic insertion. n Applications Ideal for use on high-frequency pulse circuits such as a horizontal resonance circuit for C TV and snubber circuits for sw itching pow er supplies. D o not use these products in any autom otive pow er train or safety equipm ent including battery chargers for electric vehicles and plug-in hybrids. O nly M urata products clearly stipulated as "for Autom otive use" on its catalog can be used for autom obile applications such as pow er train and safety equipm ent. Lead Code Coating Extension e A2, A3, A4 C 3 U p to the end of crim p 3.0 m ax. (in m m ) ø d 0.6–0.05 0.6–0.05 Style Fig. 1 Fig. 2 D m ax. T m ax.T m ax. <Fig. 1> <Fig. 2> 3.0 m ax. 25.0 m in. e ø d 25.0 m in. F–1.0 [Bulk] Vertical Crimp Long (Fig. 1) Straight Long (Fig. 2) D m ax. T m ax.T m ax. <Fig. 1> <Fig. 2> 3.0 m ax. 5.0–1.0 F–0.8 e ø d 5.0–1.0 Lead Code Coating Extension e B2, B3, B4 D 3 U p to the end of crim p 3.0 m ax. (in m m ) ø d 0.6–0.05 0.6–0.05 Style Fig. 1 Fig. 2 [Bulk] Vertical Crimp Short (Fig. 1) Straight Short (Fig. 2) n Marking Nominal Body Diameter DC1-3.15kVDC500V RC ø 6mm ø 7-9mm ø 10-21mm High Temperature Guaranteed Code Temperature Characteristics Nominal Capacitance Capacitance Tolerance Manufacturer's Identification Manufactured Date Code DC500V DC1-3.15kV Rated Voltage H R M arked w ith code (om itted for nom inal body diam eter ø6m m ) M arked w ith 3 figures M arked w ith code (om itted for nom inal body diam eter ø6m m ) O m itted M arked w ith code (for D C 3.15kV, m arked w ith 3KV) M arked w ith (om itted for nom inal body diam eter ø9m m and under) Abbreviation H R C 472K H R R 272K 3KV H R 471 H R C 152K H R R 102K 1KV 66 Rated Voltage Temp. Char.

C 85E.pdf Jul.13,2011 !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. D C 500V, C C haracteristics Part Number DC Rated Voltage (V) Capacitance (pF) Body Dia. D (mm) Lead Spacing F (mm) Body Thickness T (mm) Lead Package Long Bulk Lead Package Short Bulk Lead Package Taping D EH C 32H 331K ppp 500 330 –10% 6 5.0 4.0 A2B B2B N2A D EH C 32H 471K ppp 500 470 –10% 6 5.0 4.0 A2B B2B N2A D EH C 32H 681K ppp 500 680 –10% 7 5.0 4.0 A2B B2B N2A D EH C 32H 102K ppp 500 1000 –10% 8 5.0 4.0 A2B B2B N2A D EH C 32H 152K ppp 500 1500 –10% 9 5.0 4.0 A2B B2B N2A D EH C 32H 222K ppp 500 2200 –10% 10 5.0 4.0 A2B B2B N2A D EH C 32H 332K ppp 500 3300 –10% 12 5.0 4.0 A2B B2B N2A D EH C 32H 472K ppp 500 4700 –10% 14 10.0 4.0 A4B B4B - Three blank colum ns are filled w ith the lead and packaging codes. Please refer to the three colum ns on the right for the appropriate code. D C 1-3.15kV, R C haracteristics Part Number DC Rated Voltage (V) Capacitance (pF) Body Dia. D (mm) Lead Spacing F (mm) Body Thickness T (mm) Lead Package Long Bulk Lead Package Short Bulk Lead Package Taping D EH R 33A 221K ppp 1000 220 –10% 7 5.0 4.5 A2B B2B N2A D EH R 33A 331K ppp 1000 330 –10% 7 5.0 4.5 A2B B2B N2A D EH R 33A 471K ppp 1000 470 –10% 7 5.0 4.5 A2B B2B N2A D EH R 33A 681K ppp 1000 680 –10% 8 5.0 4.5 A2B B2B N2A D EH R 33A 102K ppp 1000 1000 –10% 9 5.0 4.5 A2B B2B N2A D EH R 33A 152K ppp 1000 1500 –10% 11 5.0 4.5 A2B B2B N2A D EH R 33A 222K ppp 1000 2200 –10% 13 7.5 4.5 A3B B3B N3A D EH R 33A 332K ppp 1000 3300 –10% 15 7.5 4.5 A3B B3B N7A D EH R 33A 472K ppp 1000 4700 –10% 17 7.5 4.5 A3B B3B N7A D EH R 33D 221K ppp 2000 220 –10% 7 7.5 5.0 C3B D3B P3A D EH R 33D 271K ppp 2000 270 –10% 7 7.5 5.0 C3B D3B P3A D EH R 33D 331K ppp 2000 330 –10% 8 7.5 5.0 A3B B3B N3A D EH R 33D 391K ppp 2000 390 –10% 8 7.5 5.0 A3B B3B N3A D EH R 33D 471K ppp 2000 470 –10% 9 7.5 5.0 A3B B3B N3A D EH R 33D 561K ppp 2000 560 –10% 9 7.5 5.0 A3B B3B N3A D EH R 33D 681K ppp 2000 680 –10% 10 7.5 5.0 A3B B3B N3A D EH R 33D 821K ppp 2000 820 –10% 11 7.5 5.0 A3B B3B N3A D EH R 33D 102K ppp 2000 1000 –10% 12 7.5 5.0 A3B B3B N3A D EH R 33D 122K ppp 2000 1200 –10% 12 7.5 5.0 A3B B3B N3A D EH R 33D 152K ppp 2000 1500 –10% 12 7.5 5.0 A3B B3B N3A D EH R 33D 182K ppp 2000 1800 –10% 14 7.5 5.0 A3B B3B N7A D EH R 33D 222K ppp 2000 2200 –10% 15 7.5 5.0 A3B B3B N7A D EH R 33D 272K ppp 2000 2700 –10% 17 7.5 5.0 A3B B3B N7A D EH R 33D 332K ppp 2000 3300 –10% 19 10.0 5.0 A4B B4B - D EH R 33D 392K ppp 2000 3900 –10% 20 10.0 5.0 A4B B4B - D EH R 33D 472K ppp 2000 4700 –10% 21 10.0 5.0 A4B B4B - D EH R 33F151K ppp 3150 150 –10% 7 7.5 6.0 C3B D3B P3A D EH R 33F181K ppp 3150 180 –10% 7 7.5 6.0 C3B D3B P3A D EH R 33F221K ppp 3150 220 –10% 7 7.5 6.0 C3B D3B P3A D EH R 33F271K ppp 3150 270 –10% 7 7.5 6.0 C3B D3B P3A D EH R 33F331K ppp 3150 330 –10% 8 7.5 6.0 A3B B3B N3A D EH R 33F391K ppp 3150 390 –10% 9 7.5 6.0 A3B B3B N3A D EH R 33F471K ppp 3150 470 –10% 10 7.5 6.0 A3B B3B N3A D EH R 33F561K ppp 3150 560 –10% 10 7.5 6.0 A3B B3B N3A D EH R 33F681K ppp 3150 680 –10% 11 7.5 6.0 A3B B3B N3A D EH R 33F821K ppp 3150 820 –10% 12 7.5 6.0 A3B B3B N3A D EH R 33F102K ppp 3150 1000 –10% 13 7.5 6.0 A3B B3B N3A D EH R 33F122K ppp 3150 1200 –10% 14 7.5 6.0 A3B B3B N7A D EH R 33F152K ppp 3150 1500 –10% 15 7.5 6.0 A3B B3B N7A Continued on the following page.

C 85E.pdf Jul.13,2011 !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Part Number DC Rated Voltage (V) Capacitance (pF) Body Dia. D (mm) Lead Spacing F (mm) Body Thickness T (mm) Lead Package Long Bulk Lead Package Short Bulk Lead Package Taping Continued from the preceding page. D EH R 33F182K ppp 3150 1800 –10% 16 7.5 6.0 A3B B3B N7A D EH R 33F222K ppp 3150 2200 –10% 17 7.5 6.0 A3B B3B N7A D EH R 33F272K ppp 3150 2700 –10% 19 10.0 6.0 A4B B4B - Three blank colum ns are filled w ith the lead and packaging codes. Please refer to the three colum ns on the right for the appropriate code.

C 85E.pdf Jul.13,2011 The lead w ire should be im m ersed into the m elted solder of 350–10°C up to about 1.5 to 2m m from the m ain body for 3.5–0.5 sec. Pre-treatm ent: C apacitor should be stored at 125–3°C for 1 hr., then placed at room condition* for 24–2 hrs. before initial m easurem ents. Post-treatm ent: C apacitor should be stored for 24–2 hrs. at room condition.* (Non-Preheat) Appearance N o m arked defect Capacitance Change W ithin –10% Dielectric Strength (Between Lead Wires) Per item 4. Continued on the following page. *1 "R oom condition" Tem perature: 15 to 35°C , R elative hum idity: 45 to 75% , Atm ospheric pressure: 86 to 106kPa T. C. -25 to +85°C Temp. Char. W ithin –15% W ithin –20% +85 to +125°C W ithin +15/-30%R C Step Temp. (°C) 20–2 -25–3 20–2 125–2 20–2 The lead w ire of a capacitor should be dipped into a ethanol solution of 25w t% rosin and then into m olten solder for 2–0.5 sec. In both cases the depth of dipping is up to about 1.5 to 2m m from the root of lead w ires. Tem p. of solder: Lead Free Solder (Sn-3Ag-0.5C u) 245–5°C H 63 Eutectic Solder 235–5°C Lead w ire should be soldered w ith uniform coating on the axial direction over 3/4 of the circum ferential direction. The capacitor should be firm ly soldered to the supporting lead w ire and vibrated at a frequency range of 10 to 55H z, 1.5m m in total am plitude, w ith about a 1-m inute rate of vibration change from 10H z to 55H z and back to 10H z. Apply for a total of 6 hrs., 2 hrs. each in 3 m utually perpendicular directions. Appearance N o m arked defect Capacitance W ithin specified tolerance C har. C : 0.3% m ax. As show n in the figure at right, fix the body of the capacitor and apply a tensile w eight gradually to each lead w ire in the radial direction of the capacitor up to 10N (5N for lead diam eter 0.5m m ), and keep it for 10–1 sec.9 Strength of Lead Pull Lead w ire should not be cut off. C apacitor should not be broken. Bending Each lead w ire should be subjected to 5N (2.5N for lead diam eter 0.5m m ) of w eight and bent 90° at the point of egress, in one direction, then returned to its original position and bent 90° in the opposite direction at the rate of one bend in 2 to 3 sec. The capacitance m easurem ent should be m ade at each step specified in the Table. Pre-treatm ent: C apacitor should be stored at 125–3°C for 1 hr., then placed at room condition* for 24–2 hrs. before m easurem ents. The dissipation factor should be m easured at 20°C w ith C har. C : 0.3% m ax. The capacitance should be m easured at 20°C w ith 1–0.2kH z and AC 5V(r.m .s.) m ax.6 Capacitance W ithin specified tolerance The insulation resistance should be m easured w ith D C 500–50V w ithin 60–5 sec. of charging.5 Insulation Resistance (I.R.) Between Lead Wires 10000M Ω m in. The capacitor should not be dam aged w hen D C voltage of 200% of the rated voltage (D C 1 to 3.15kV) or D C voltage of 250% of the rated voltage (D C 500V) is applied betw een the lead w ires for 1 to 5 sec. (C harge/D ischarge currentV50m A) Body Insulation N o failure The capacitor is placed in the container w ith m etal balls of diam eter 1m m so that each lead w ire, short circuited, is kept about 2m m off the m etal balls as show n in the figure at right, and AC 1250V(r.m .s.) <50/60H z> is applied for 1 to 5 sec. betw een capacitor lead w ires and m etal balls. (C harge/D ischarge currentV50m A) The capacitor should be visually inspected.3 Marking To be easily legible The capacitor should be visually inspected for evidence of defect. D im ensions should be m easured w ith slide calipers.2 Appearance and Dimensions N o visible defect, and dim ensions are w ithin specified range.

1 Operating Temperature Range -25 to +125°C

No. Test MethodSpecificationsItem D EH Series (125°C G uaranteed / Low -dissipation Factor / D C 250V-3.15kV) Specifications and Test M ethods W About 2m m M etal balls D EH Series Specifications and Test M ethods !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

C 85E.pdf Jul.13,2011 * "R oom condition" Tem perature: 15 to 35°C , R elative hum idity: 45 to 75% , Atm ospheric pressure: 86 to 106kPa Apply a D C voltage of 200% of the rated voltage (D C 500V) or D C voltage of 150% of the rated voltage (D C 1 to 3.15kV) for 1000 +48/-0 hrs. at 125–2°C w ith a relative hum idity of 50% m ax. (C harge/D ischarge currentV50m A) Pre-treatm ent: C apacitor should be stored at 125–3°C for 1 hr., then placed at room condition* for 24–2 hrs. before initial m easurem ents. Post-treatm ent: C apacitor should be stored at 125–3°C for 1 hr., then placed at room condition* for 24–2 hrs. Appearance N o m arked defect Capacitance Change W ithin –10% D.F. 0.4% m ax. I.R. 2000M Ω m in. Apply the rated voltage for 500+24/-0 hrs. at 40–2°C in 90 to 95% relative hum idity. (C harge/D ischarge currentV50m A) Pre-treatm ent: C apacitor should be stored at 125–3°C for 1 hr., then placed at room condition* for 24–2 hrs. before initial m easurem ents. Post-treatm ent: C apacitor should be stored for 1 to 2 hrs. at room condition.* Appearance N o m arked defect Capacitance Change W ithin –10% D.F. 0.6% m ax. I.R. 1000M Ω m in. Continued from the preceding page. Step Temperature (°C) -25–3 R oom Tem p. 125–3 R oom Tem p. Time (min) Set the capacitor for 500 +24/-0 hrs. at 40–2°C in 90 to 95% relative hum idity. Pre-treatm ent: C apacitor should be stored at 125–3°C for 1 hr., then placed at room condition* for 24–2 hrs. before initial m easurem ents. Post-treatm ent: C apacitor should be stored for 1 to 2 hrs. at room condition.* Steady State) Appearance N o m arked defect Capacitance Change W ithin –10% D.F. 0.4% m ax. I.R. 1000M Ω m in. The capacitor should be subjected to 5 tem perature cycles. <Tem perature C ycle> C ycle tim e: 5 cycles Pre-treatm ent: C apacitor should be stored at 125–3°C for 1 hr., then placed at room condition* for 24–2 hrs. before initial m easurem ents. Post-treatm ent: C apacitor should be stored for 24–2 hrs. at room condition.* Appearance N o m arked defect D.F. 0.4% m ax. Capacitance Change W ithin –10% I.R. 1000M Ω m in. Dielectric Strength (Between Lead Wires) Per item 4. First the capacitor should be stored at 120+0/-5°C for 60+0/-5 sec. Then, as in the figure, the lead w ires should be im m ersed in solder of 260+0/-5°C up to 1.5 to 2.0m m from the root of term inal for 7.5+0/-1 sec. Pre-treatm ent: C apacitor should be stored at 125–3°C for 1 hr., then placed at room condition* for 24–2 hrs. before initial m easurem ents. Post-treatm ent: C apacitor should be stored for 24–2 hrs. at room condition.* (On-Preheat) Appearance N o m arked defect Capacitance Change W ithin –10% Dielectric Strength (Between Lead Wires) Per item 4. No. Test MethodSpecificationsItem D EH Series (125°C G uaranteed / Low -dissipation Factor / D C 250V-3.15kV) Specifications and Test M ethods /, /, /, /, /, /, /, /, /, /, Therm al Screen C apacitor 1.5 to 2.0m m M olten Solder D EH Series Specifications and Test M ethods !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

C 85E.pdf Jul.13,2011 !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. High Voltage Ceramic Capacitors D EA Series (125°C G uaranteed/C lass 1/D C 1k-3.15kV) n Features 1. Tem perature com pensating type ceram ics realize low er heat dissipation than D EH /D ES series. 2. O perating tem perature range is guaranteed up to 125 degrees C . 3. C oated w ith flam e-retardant epoxy resin (equivalent to U L94V-0 standard). Please contact us w hen a halogen-free product* is necessary. * C l=900ppm m ax., Br=900ppm m ax. and C l+Br=1500ppm m ax. 4. Taping available for autom atic insertion. n Applications 1. Ideal for use as the ballast in backlighting inverters for liquid crystal display. 2. Ideal for use on high-frequency pulse circuits such as a horizontal resonance circuit for C TV and snubber circuits for sw itching pow er supplies. D o not use these products in any autom otive pow er train or safety equipm ent including battery chargers for electric vehicles and plug-in hybrids. O nly M urata products clearly stipulated as "for Autom otive use" on its catalog can be used for autom obile applications such as pow er train and safety equipm ent. Lead Code Coating Extension e A2, A3 C 1, C D C 3 U p to the end of crim p 3.0 m ax. 3.0 m ax. (in m m ) ø d 0.6–0.05 0.5–0.05 0.6–0.05 Style Fig. 1 Fig. 2 Fig. 2 D m ax. T m ax.T m ax. <Fig. 1> <Fig. 2> 3.0 m ax. 25.0 m in. e ø d 25.0 m in. F–1.0 [Bulk] Vertical Crimp Long (Fig. 1) Straight Long (Fig. 2) D m ax. T m ax.T m ax. <Fig. 1> <Fig. 2> 3.0 m ax. 5.0–1.0 F–0.8 e ø d 5.0–1.0 Lead Code Coating Extension e B2, B3 D 1, D D D 3 U p to the end of crim p 3.0 m ax. 3.0 m ax. (in m m ) ø d 0.6–0.05 0.5–0.05 0.6–0.05 Style Fig. 1 Fig. 2 Fig. 2 [Bulk] Vertical Crimp Short (Fig. 1) Straight Short (Fig. 2) n Marking SL ø 4.5-5mm ø 6mm ø 7-9mm ø 10-16mm Nominal Capacitance Capacitance Tolerance Rated Voltage Manufacturer's Identification Manufactured Date Code U nder 100pF: Actual value, 100pF and over: M arked w ith 3 figures M arked w ith code (om itted for nom inal body diam eter ø6m m and under) M arked w ith code (for D C 3.15kV, m arked w ith 3KV) M arked w ith (om itted for nom inal body diam eter ø9m m and under) Abbreviation (om itted for nom inal body diam eter ø5m m and under) Temp. Char. Nominal Body Diameter 391J 3KV 3KV 1KV 181J 2KV

C 85E.pdf Jul.13,2011 !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. SL C haracteristics Part Number DC Rated Voltage (V) Capacitance (pF) Body Dia. D (mm) Lead Spacing F (mm) Body Thickness T (mm) Lead Package Long Bulk Lead Package Short Bulk Lead Package Taping D EA 1X3A 100Jppp 1000 10 –5% 4.5 5.0 4.0 C1B D1B P2A D EA 1X3A 120Jppp 1000 12 –5% 4.5 5.0 4.0 C1B D1B P2A D EA 1X3A 150Jppp 1000 15 –5% 4.5 5.0 4.0 C1B D1B P2A D EA 1X3A 180Jppp 1000 18 –5% 4.5 5.0 4.0 C1B D1B P2A D EA 1X3A 220Jppp 1000 22 –5% 4.5 5.0 4.0 C1B D1B P2A D EA 1X3A 270Jppp 1000 27 –5% 4.5 5.0 4.0 C1B D1B P2A D EA 1X3A 330Jppp 1000 33 –5% 4.5 5.0 4.0 C1B D1B P2A D EA 1X3A 390Jppp 1000 39 –5% 4.5 5.0 4.0 C1B D1B P2A D EA 1X3A 470Jppp 1000 47 –5% 4.5 5.0 4.0 C1B D1B P2A D EA 1X3A 560Jppp 1000 56 –5% 5 5.0 4.0 C1B D1B P2A D EA 1X3A 680Jppp 1000 68 –5% 5 5.0 4.0 C1B D1B P2A D EA 1X3A 820Jppp 1000 82 –5% 6 5.0 4.0 A2B B2B N2A D EA 1X3A 101Jppp 1000 100 –5% 6 5.0 4.0 A2B B2B N2A D EA 1X3A 121Jppp 1000 120 –5% 6 5.0 4.0 A2B B2B N2A D EA 1X3A 151Jppp 1000 150 –5% 7 5.0 4.0 A2B B2B N2A D EA 1X3A 181Jppp 1000 180 –5% 7 5.0 4.0 A2B B2B N2A D EA 1X3A 221Jppp 1000 220 –5% 8 5.0 4.0 A2B B2B N2A D EA 1X3A 271Jppp 1000 270 –5% 9 5.0 4.0 A2B B2B N2A D EA 1X3A 331Jppp 1000 330 –5% 10 5.0 4.0 A2B B2B N2A D EA 1X3A 391Jppp 1000 390 –5% 10 5.0 4.0 A2B B2B N2A D EA 1X3A 471Jppp 1000 470 –5% 11 5.0 4.0 A2B B2B N2A D EA 1X3A 561Jppp 1000 560 –5% 12 7.5 4.0 A3B B3B N3A D EA 1X3D 100Jppp 2000 10 –5% 4.5 5.0 5.0 C1B D1B P2A D EA 1X3D 120Jppp 2000 12 –5% 4.5 5.0 5.0 C1B D1B P2A D EA 1X3D 150Jppp 2000 15 –5% 4.5 5.0 5.0 C1B D1B P2A D EA 1X3D 180Jppp 2000 18 –5% 4.5 5.0 5.0 C1B D1B P2A D EA 1X3D 220Jppp 2000 22 –5% 4.5 5.0 5.0 C1B D1B P2A D EA 1X3D 270Jppp 2000 27 –5% 4.5 5.0 5.0 C1B D1B P2A D EA 1X3D 330Jppp 2000 33 –5% 4.5 5.0 5.0 C1B D1B P2A D EA 1X3D 390Jppp 2000 39 –5% 5 5.0 5.0 C1B D1B P2A D EA 1X3D 470Jppp 2000 47 –5% 6 5.0 5.0 A2B B2B N2A D EA 1X3D 560Jppp 2000 56 –5% 6 5.0 5.0 A2B B2B N2A D EA 1X3D 680Jppp 2000 68 –5% 6 5.0 5.0 A2B B2B N2A D EA 1X3D 820Jppp 2000 82 –5% 7 5.0 5.0 A2B B2B N2A D EA 1X3D 101Jppp 2000 100 –5% 7 5.0 5.0 A2B B2B N2A D EA 1X3D 121Jppp 2000 120 –5% 8 5.0 5.0 A2B B2B N2A D EA 1X3D 151Jppp 2000 150 –5% 8 5.0 5.0 A2B B2B N2A D EA 1X3D 181Jppp 2000 180 –5% 9 5.0 5.0 A2B B2B N2A D EA 1X3D 221Jppp 2000 220 –5% 10 5.0 5.0 A2B B2B N2A D EA 1X3D 271Jppp 2000 270 –5% 11 5.0 5.0 A2B B2B N2A D EA 1X3D 331Jppp 2000 330 –5% 12 7.5 5.0 A3B B3B N3A D EA 1X3D 391Jppp 2000 390 –5% 13 7.5 5.0 A3B B3B N3A D EA 1X3D 471Jppp 2000 470 –5% 14 7.5 5.0 A3B B3B N7A D EA 1X3D 561Jppp 2000 560 –5% 15 7.5 5.0 A3B B3B N7A D EA 1X3F100Jppp 3150 10 –5% 5 7.5 6.0 CDB DDB P3A D EA 1X3F120Jppp 3150 12 –5% 5 7.5 6.0 CDB DDB P3A D EA 1X3F150Jppp 3150 15 –5% 5 7.5 6.0 CDB DDB P3A D EA 1X3F180Jppp 3150 18 –5% 5 7.5 6.0 CDB DDB P3A D EA 1X3F220Jppp 3150 22 –5% 5 7.5 6.0 CDB DDB P3A D EA 1X3F270Jppp 3150 27 –5% 6 7.5 6.0 C3B D3B P3A D EA 1X3F330Jppp 3150 33 –5% 6 7.5 6.0 C3B D3B P3A D EA 1X3F390Jppp 3150 39 –5% 6 7.5 6.0 C3B D3B P3A D EA 1X3F470Jppp 3150 47 –5% 7 7.5 6.0 C3B D3B P3A D EA 1X3F560Jppp 3150 56 –5% 7 7.5 6.0 C3B D3B P3A Continued on the following page.

C 85E.pdf Jul.13,2011 !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Part Number DC Rated Voltage (V) Capacitance (pF) Body Dia. D (mm) Lead Spacing F (mm) Body Thickness T (mm) Lead Package Long Bulk Lead Package Short Bulk Lead Package Taping Continued from the preceding page. D EA 1X3F680Jppp 3150 68 –5% 8 7.5 6.0 A3B B3B N3A D EA 1X3F820Jppp 3150 82 –5% 8 7.5 6.0 A3B B3B N3A D EA 1X3F101Jppp 3150 100 –5% 9 7.5 6.0 A3B B3B N3A D EA 1X3F121Jppp 3150 120 –5% 10 7.5 6.0 A3B B3B N3A D EA 1X3F151Jppp 3150 150 –5% 11 7.5 6.0 A3B B3B N3A D EA 1X3F181Jppp 3150 180 –5% 11 7.5 6.0 A3B B3B N3A D EA 1X3F221Jppp 3150 220 –5% 12 7.5 6.0 A3B B3B N3A D EA 1X3F271Jppp 3150 270 –5% 14 7.5 6.0 A3B B3B N7A D EA 1X3F331Jppp 3150 330 –5% 15 7.5 6.0 A3B B3B N7A D EA 1X3F391Jppp 3150 390 –5% 16 7.5 6.0 A3B B3B N7A Three blank colum ns are filled w ith the lead and packaging codes. Please refer to the three colum ns on the right for the appropriate code.

C 85E.pdf Jul.13,2011 D EA Series (125°C G uaranteed / C lass1 / D C 1kV-3.15kV) Specifications and Test M ethods No. Item Operating Temperature Range Specifications -25 to +125°C Test Method within specified range. To be easily legible The capacitor should be visually inspected for evidence of defect. Dimensions should be measured with slide calipers. 3 Marking The capacitor should be visually inspected. The capacitor should not be damaged when DC voltage of 200% of the rated voltage is applied between the lead wires for 1 to 5 sec. (Charge/Discharge currentV50mA) The capacitor is placed in the container with metal balls of diameter 1mm so that each lead wire, short circuited, is kept about 2mm off the metal balls as shown in the figure at right, and AC1250V(r.m.s.) <50/60Hz> is applied for 1 to 5 sec. between capacitor lead wires and metal balls. (Charge/Discharge currentV50mA) Resistance (I.R.) The insulation resistance should be measured with DC500 ±50V within 60±5 sec. of charging. About 2m m M etal balls 7 Q Between Lead Wires 10000M Ω min. 6 Capacitance The capacitance should be measured at 20°C with 1±0.2MHz and AC5V(r.m.s.) max.Within specified tolerance 400+20C*2min. (30pF under) 1000 min. (30pF min.) +350 to -1000ppm/°C (Temp. range: +20 to +85°C) The Q should be measured at 20°C with 1±0.2MHz and AC5V(r.m.s.) max. The capacitance measurement should be made at each step specified in the Table. Lead wire should not be cut off. Capacitor should not be broken. As shown in the figure at right, fix the body of the capacitor and apply a tensile weight gradually to each lead wire in the radial direction of the capacitor up to 10N (5N for lead diameter 0.5mm), and keep it for 10±1 sec. Bending Each lead wire should be subjected to 5N (2.5N for lead diameter 0.5mm) of weight and bent 90°at the point of egress, in one direction, then returned to its original position and bent 90°in the opposite direction at the rate of one bend in 2 to 3 sec. Appearance No marked defect The capacitor should be firmly soldered to the supporting lead wire and vibrated at a frequency range of 10 to 55Hz, 1.5mm in total amplitude, with about a 1-minute rate of vibration change from 10Hz to 55Hz and back to 10Hz. Apply for a total of 6 hrs., 2 hrs. each in 3 mutually perpendicular directions. Lead wire should be soldered with uniform coating on the axial direction over 3/4 of the circumferential direction. The lead wire of a capacitor should be dipped into a ethanol solution of 25wt% rosin and then into molten solder for 2±0.5 sec. In both cases the depth of dipping is up to about 1.5 to 2mm from the root of lead wires. Temp. of solder: Lead Free Solder (Sn-3Ag-0.5Cu) 245±5°C H63 Eutectic Solder 235±5°C Capacitance Within specified tolerance Q 400+20C*2min. (30pF under) 1000 min. (30pF min.) Continued on the following page. Temp. (° C) 2 3 4 5 20±2 -25±3 20±2 85±2 20±2 Step 1 W *1 "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa *2 "C" expresses nominal capacitance value (pF). (Non-Preheat) Appearance Capacitance Change Dielectric Strength (Between Lead Wires) No marked defect Within ±2.5% Per item 4. The lead wire should be immersed into the melted solder of 350±10°C (Body of ø5mm and under: 270±5°C) up to about 1.5 to 2mm from the main body for 3.5±0.5 sec. (Body of ø5mm and under: 5±0.5 sec.) Post-treatment: Capacitor should be stored for 1 to 2 hrs. at room condition.*1 D EA Series Specifications and Test M ethods !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

C 85E.pdf Jul.13,2011 D EA Series (125°C G uaranteed / C lass1 / D C 1kV-3.15kV) Specifications and Test M ethods No. Item Specifications Test Method Appearance No marked defect Capacitance Change Within ±5% Q 275+5/2C*2min. (30pF under) 350 min. (30pF min.) I.R. 1000M Ω min. Apply the rated voltage for 500+24/-0 hrs. at 40±2°C in 90 to 95% relative humidity. (Charge/Discharge currentV50mA) Post-treatment: Capacitor should be stored for 1 to 2 hrs. at room condition.*1 Appearance No marked defect Capacitance Change Within ±3% Q 275+5/2C*2min. (30pF under) 350 min. (30pF min.) I.R. 2000M Ω min. Apply a DC voltage of 150% of the rated voltage for 1000+48/-0 hrs. at 125±2°C with a relative humidity of 50% max. (Charge/Discharge currentV50mA) Post-treatment: Capacitor should be stored for 1 to 2 hrs. at room condition.*1 Appearance No marked defect Capacitance Change Within ±5% Q 275+5/2C*2min. (30pF under) 350 min. (30pF min.) I.R. 1000M Ω min. Dielectric Strength (Between Lead Wires) Per item 4. The capacitor should be subjected to 5 temperature cycles. <Temperature Cycle> Cycle time: 5 cycles Post-treatment: Capacitor should be stored for 1 to 2 hrs. at room condition.*1 *1 "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa *2 "C" expresses nominal capacitance value (pF). Continued from the preceding page. Time (min) -25±3 30 2 Room Temp. 3 3 125±3 30 4 Room Temp. 3 Step Temperature (° C) Steady State) Appearance Capacitance Change Q I.R. No marked defect Within ±5% 275+5/2C* 2min. (30pF under) 350 min. (30pF min.) 1000M Ω min. Set the capacitor for 500+24/-0 hrs. at 40±2°C in 90 to 95% relative humidity. Post-treatment: Capacitor should be stored for 1 to 2 hrs. at room condition.*1 (On-Preheat) Appearance Capacitance Change Dielectric Strength (Between Lead Wires) No marked defect Within ±2.5% Per item 4. First the capacitor should be stored at 120+0/-5°C for 60+0/-5 sec. Then, as in the figure, the lead wires should be immersed in solder of 260+0/-5°C up to 1.5 to 2.0mm from the root of terminal for 7.5+0/-1 sec. Post-treatment: Capacitor should be stored for 1 to 2 hrs. at room condition.* /, /, /, /, /, /, /, /, /, /, /, /, /, Therm al Screen C apacitor 1.5 to 2.0m m M olten Solder D EA Series Specifications and Test M ethods !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

C 85E.pdf Jul.13,2011 !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. High Voltage Ceramic Capacitors D EB Series (C lass 2/D C 1k-3.15kV) n Features 1. Sm all size and high capacitance 2. C oated w ith flam e-retardant epoxy resin (equivalent to U L94V-0 standard). Please contact us w hen a halogen-free product* is necessary. * C l=900ppm m ax., Br=900ppm m ax. and C l+Br=1500ppm m ax. 3. Taping available for autom atic insertion. n Applications Ideal for use on decoupling circuits for pow er supplies. D o not use these products in any autom otive pow er train or safety equipm ent including battery chargers for electric vehicles and plug-in hybrids. O nly M urata products clearly stipulated as "for Autom otive use" on its catalog can be used for autom obile applications such as pow er train and safety equipm ent. Lead Code Coating Extension e A2, A3 C 1, C D C 3 U p to the end of crim p 3.0 m ax. 3.0 m ax. (in m m ) ø d 0.6–0.05 0.5–0.05 0.6–0.05 Style Fig. 1 Fig. 2 Fig. 2 D m ax. T m ax.T m ax. <Fig. 1> <Fig. 2> 3.0 m ax. 25.0 m in. e ø d 25.0 m in. F–1.0 [Bulk] Vertical Crimp Long (Fig. 1) Straight Long (Fig. 2) D m ax. T m ax.T m ax. <Fig. 1> <Fig. 2> 3.0 m ax. 5.0–1.0 F–0.8 e ø d 5.0–1.0 Lead Code Coating Extension e B2, B3 D 1, D D D 3 U p to the end of crim p 3.0 m ax. 3.0 m ax. (in m m ) ø d 0.6–0.05 0.5–0.05 0.6–0.05 Style Fig. 1 Fig. 2 Fig. 2 [Bulk] Vertical Crimp Short (Fig. 1) Straight Short (Fig. 2) n Marking EB F ø 4.5-5mm ø 6mm ø 7-9mm ø 10-16mm Temperature Characteristics Nominal Capacitance Capacitance Tolerance Rated Voltage Manufacturer's Identification Manufactured Date Code M arked w ith code for char. B and E (om itted for nom inal body diam eter ø9m m and under) M arked w ith 3 figures M arked w ith code (om itted for nom inal body diam eter ø6m m and under) M arked w ith code (for D C 3.15kV, m arked w ith 3KV) M arked w ith (om itted for nom inal body diam eter ø9m m and under) Abbreviation (om itted for nom inal body diam eter ø5m m and under) Temp. Char. Nominal Body Diameter 102 2KV 102 1KV 102Z 3KV B 332K 3KV E 472Z 3KV 103Z 2KV 331 3KV 221 3KV 102K 3KV 222 1KV 102 2KV 472Z 2KV

C 85E.pdf Jul.13,2011 !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. B C haracteristics Part Number DC Rated Voltage (V) Capacitance (pF) Body Dia. D (mm) Lead Spacing F (mm) Body Thickness T (mm) Lead Package Long Bulk Lead Package Short Bulk Lead Package Taping D EB B 33A 101K ppp 1000 100 –10% 4.5 5.0 4.0 C1B D1B P2A D EB B 33A 151K ppp 1000 150 –10% 4.5 5.0 4.0 C1B D1B P2A D EB B 33A 221K ppp 1000 220 –10% 4.5 5.0 4.0 C1B D1B P2A D EB B 33A 331K ppp 1000 330 –10% 4.5 5.0 4.0 C1B D1B P2A D EB B 33A 471K ppp 1000 470 –10% 5 5.0 4.0 C1B D1B P2A D EB B 33A 681K ppp 1000 680 –10% 6 5.0 4.0 A2B B2B N2A D EB B 33A 102K ppp 1000 1000 –10% 6 5.0 4.0 A2B B2B N2A D EB B 33A 152K ppp 1000 1500 –10% 8 5.0 4.0 A2B B2B N2A D EB B 33A 222K ppp 1000 2200 –10% 9 5.0 4.0 A2B B2B N2A D EB B 33A 332K ppp 1000 3300 –10% 10 5.0 4.0 A2B B2B N2A D EB B 33A 472K ppp 1000 4700 –10% 12 7.5 4.0 A3B B3B N3A D EB B 33A 682K ppp 1000 6800 –10% 15 7.5 4.0 A3B B3B N7A D EB B 33D 101K ppp 2000 100 –10% 4.5 5.0 5.0 C1B D1B P2A D EB B 33D 151K ppp 2000 150 –10% 4.5 5.0 5.0 C1B D1B P2A D EB B 33D 221K ppp 2000 220 –10% 4.5 5.0 5.0 C1B D1B P2A D EB B 33D 331K ppp 2000 330 –10% 5 5.0 5.0 C1B D1B P2A D EB B 33D 471K ppp 2000 470 –10% 6 5.0 5.0 A2B B2B N2A D EB B 33D 681K ppp 2000 680 –10% 7 5.0 5.0 A2B B2B N2A D EB B 33D 102K ppp 2000 1000 –10% 8 5.0 5.0 A2B B2B N2A D EB B 33D 152K ppp 2000 1500 –10% 9 5.0 5.0 A2B B2B N2A D EB B 33D 222K ppp 2000 2200 –10% 10 5.0 5.0 A2B B2B N2A D EB B 33D 332K ppp 2000 3300 –10% 12 7.5 5.0 A3B B3B N3A D EB B 33D 472K ppp 2000 4700 –10% 15 7.5 5.0 A3B B3B N7A D EB B 33F101K ppp 3150 100 –10% 5 7.5 6.0 CDB DDB P3A D EB B 33F151K ppp 3150 150 –10% 5 7.5 6.0 CDB DDB P3A D EB B 33F221K ppp 3150 220 –10% 5 7.5 6.0 CDB DDB P3A D EB B 33F331K ppp 3150 330 –10% 6 7.5 6.0 C3B D3B P3A D EB B 33F471K ppp 3150 470 –10% 7 7.5 6.0 C3B D3B P3A D EB B 33F681K ppp 3150 680 –10% 8 7.5 6.0 A3B B3B N3A D EB B 33F102K ppp 3150 1000 –10% 9 7.5 6.0 A3B B3B N3A D EB B 33F152K ppp 3150 1500 –10% 11 7.5 6.0 A3B B3B N3A D EB B 33F222K ppp 3150 2200 –10% 13 7.5 6.0 A3B B3B N3A D EB B 33F332K ppp 3150 3300 –10% 15 7.5 6.0 A3B B3B N7A Three blank colum ns are filled w ith the lead and packaging codes. Please refer to the three colum ns on the right for the appropriate code. E C haracteristics Part Number DC Rated Voltage (V) Capacitance (pF) Body Dia. D (mm) Lead Spacing F (mm) Body Thickness T (mm) Lead Package Long Bulk Lead Package Short Bulk Lead Package Taping D EB E33A 102Zppp 1000 1000 +80/-20% 5 5.0 4.0 C1B D1B P2A D EB E33A 222Zppp 1000 2200 +80/-20% 7 5.0 4.0 A2B B2B N2A D EB E33A 472Zppp 1000 4700 +80/-20% 9 5.0 4.0 A2B B2B N2A D EB E33A 103Zppp 1000 10000 +80/-20% 13 7.5 4.0 A3B B3B N3A D EB E33D 102Zppp 2000 1000 +80/-20% 6 5.0 5.0 A2B B2B N2A D EB E33D 222Zppp 2000 2200 +80/-20% 8 5.0 5.0 A2B B2B N2A D EB E33D 472Zppp 2000 4700 +80/-20% 11 5.0 5.0 A2B B2B N2A D EB E33D 103Zppp 2000 10000 +80/-20% 16 7.5 5.0 A3B B3B N7A D EB E33F102Zppp 3150 1000 +80/-20% 7 7.5 6.0 C3B D3B P3A D EB E33F222Zppp 3150 2200 +80/-20% 10 7.5 6.0 A3B B3B N3A D EB E33F472Zppp 3150 4700 +80/-20% 13 7.5 6.0 A3B B3B N3A Three blank colum ns are filled w ith the lead and packaging codes. Please refer to the three colum ns on the right for the appropriate code.

C 85E.pdf Jul.13,2011 !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. F C haracteristics Part Number DC Rated Voltage (V) Capacitance (pF) Body Dia. D (mm) Lead Spacing F (mm) Body Thickness T (mm) Lead Package Long Bulk Lead Package Short Bulk Lead Package Taping D EB F33A 222Zppp 1000 2200 +80/-20% 6 5.0 4.0 A2B B2B N2A D EB F33A 472Zppp 1000 4700 +80/-20% 7 5.0 4.0 A2B B2B N2A D EB F33A 103Zppp 1000 10000 +80/-20% 10 5.0 4.0 A2B B2B N2A D EB F33D 102Zppp 2000 1000 +80/-20% 5 5.0 5.0 C1B D1B P2A D EB F33D 222Zppp 2000 2200 +80/-20% 7 5.0 5.0 A2B B2B N2A D EB F33D 472Zppp 2000 4700 +80/-20% 9 5.0 5.0 A2B B2B N2A D EB F33D 103Zppp 2000 10000 +80/-20% 12 7.5 5.0 A3B B3B N3A Three blank colum ns are filled w ith the lead and packaging codes. Please refer to the three colum ns on the right for the appropriate code.

C 85E.pdf Jul.13,2011 D EB Series (C lass2 / D C 1kV-3.15kV) Specifications and Test M ethods No. Item Operating Temperature Range Specifications -25 to +85°C Test Method within specified range. To be easily legible The capacitor should be visually inspected for evidence of defect. Dimensions should be measured with slide calipers. 3 Marking The capacitor should be visually inspected. The capacitor should not be damaged when DC voltage of 200% of the rated voltage is applied between the lead wires for 1 to 5 sec. (Charge/Discharge currentV50mA) The capacitor is placed in the container with metal balls of diameter 1mm so that each lead wire, short circuited, is kept about 2mm off the metal balls as shown in the figure at right, and DC voltage of 1.3kV is applied for 1 to 5 sec. between capacitor lead wires and metal balls. (Charge/Discharge currentV50mA) Resistance (I.R.) The insulation resistance should be measured with DC500 ±50V within 60±5 sec. of charging. About 2m m M etal balls 7 Dissipation Factor (D.F.) Between Lead Wires 10000M Ω min. 6 Capacitance The capacitance should be measured at 20°C with 1±0.2kHz and AC5V(r.m.s.) max.Within specified tolerance Char. B, E: 2.5% max. Char. F: 5.0% max. Char. B: Within ±10% Char. E: Within +20/-55% Char. F: Within +30/-80% The dissipation factor should be measured at 20°C with The capacitance measurement should be made at each step specified in the Table. Pre-treatment: Capacitor should be stored at 85±2°C for 1 hr., then placed at room condition* for 24±2 hrs. before measurements. Lead wire should not be cut off. Capacitor should not be broken. As shown in the figure at right, fix the body of the capacitor and apply a tensile weight gradually to each lead wire in the radial direction of the capacitor up to 10N (5N for lead diameter 0.5mm), and keep it for 10±1 sec. Bending Each lead wire should be subjected to 5N (2.5N for lead diameter 0.5mm) of weight and bent 90°at the point of egress, in one direction, then returned to its original position and bent 90°in the opposite direction at the rate of one bend in 2 to 3 sec. Appearance No marked defect The capacitor should be firmly soldered to the supporting lead wire and vibrated at a frequency range of 10 to 55Hz, 1.5mm in total amplitude, with about a 1-minute rate of vibration change from 10Hz to 55Hz and back to 10Hz. Apply for a total of 6 hrs., 2 hrs. each in 3 mutually perpendicular directions. Lead wire should be soldered with uniform coating on the axial direction over 3/4 of the circumferential direction. The lead wire of a capacitor should be dipped into a ethanol solution of 25wt% rosin and then into molten solder for 2±0.5 sec. In both cases the depth of dipping is up to about 1.5 to 2mm from the root of lead wires. Temp. of solder: Lead Free Solder (Sn-3Ag-0.5Cu) 245±5°C H63 Eutectic Solder 235±5°C Capacitance Within specified tolerance Char. F: 5.0% max. Continued on the following page. Temp. (° C) 2 3 4 5 20±2 -25±3 20±2 85±2 20±2 Step 1 W * "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa (Non-Preheat) Appearance Capacitance Change Dielectric Strength (Between Lead Wires) No marked defect Char. B: Within ±5% Char. E: Within ±15% Char. F: Within ±20% Per item 4. The lead wire should be immersed into the melted solder of 350±10°C (Body of ø5mm and under: 270±5°C) up to about 1.5 to 2mm from the main body for 3.5±0.5 sec. (Body of ø5mm and under: 5±0.5 sec.) Pre-treatment: Capacitor should be stored at 85±2°C for 1 hr., then placed at room condition* for 24±2 hrs. before initial measurements. Post-treatment: Capacitor should be stored for 4 to 24 hrs. at room condition.* D EB Series Specifications and Test M ethods !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

C 85E.pdf Jul.13,2011 D EB Series (C lass2 / D C 1kV-3.15kV) Specifications and Test M ethods No. Item Specifications Test Method Steady State) Appearance Capacitance Change D.F. I.R. No marked defect Char. B: Within ±10% Char. E: Within ±20% Char. F: Within ±30% Char. B, E: 5.0% max. Char. F: 7.5% max. 1000M Ω min. Set the capacitor for 500+24/-0 hrs. at 40±2°C in 90 to 95% relative humidity. Pre-treatment: Capacitor should be stored at 85±2°C for 1 hr., then placed at room condition* for 24±2 hrs. before initial measurements. Post-treatment: Capacitor should be stored for 1 to 2 hrs. at room condition.*16 Humidity Loading Appearance No marked defect Capacitance Change Char. B: Within ±10% Char. E: Within ±20% Char. F: Within ±30% Char. F: 7.5% max. I.R. 500M Ω min. Apply the rated voltage for 500+24/-0 hrs. at 40±2°C in 90 to 95% relative humidity. (Charge/Discharge currentV50mA) Pre-treatment: Capacitor should be stored at 85±2°C for 1 hr., then placed at room condition* for 24±2 hrs. before initial measurements. Post-treatment: Capacitor should be stored at 85±2°C for 1 hr., then placed at room condition* for 24±2 hrs. Appearance No marked defect Capacitance Change Char. B: Within ±10% Char. E: Within ±20% Char. F: Within ±30% Char. F: 7.5% max. I.R. 2000M Ω min. Apply a DC voltage of 150% of the rated voltage for 1000+48/-0 hrs. at 85±2°C with a relative humidity of 50% max. (Charge/Discharge currentV50mA) Pre-treatment: Capacitor should be stored at 85±2°C for 1 hr., then placed at room condition* for 24±2 hrs. before initial measurements. Post-treatment: Capacitor should be stored at 85±2°C for 1 hr., then placed at room condition* for 24±2 hrs. Temperature and Immersion Cycle Appearance No marked defect Capacitance Change Char. B: Within ±10% Char. E: Within ±20% Char. F: Within ±30% Char. F: 7.5% max. I.R. 2000M Ω min. Dielectric Strength (Between Lead Wires) Per item 4. The capacitor should be subjected to 5 temperature cycles, then consecutively to 2 immersion cycles. <Temperature Cycle> Cycle time: 5 cycles <Immersion Cycle> Cycle time : 2 cycles Pre-treatment: Capacitor should be stored at 85±2°C for 1 hr., then placed at room condition* for 24±2 hrs. before initial measurements. Post-treatment: Capacitor should be stored for 4 to 24 hrs. at room condition.* * "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa Continued from the preceding page. Time (min) -25±3 30 2 Room Temp. 3 3 85±3 30 4 Room Temp. 3 Step Temperature (° C) Time (min) 1 65+5/-0 Clean water15 2 0±3 Salt water15 Step Temperature (° C) Immersion Water (On-Preheat) Appearance Capacitance Change Dielectric Strength (Between Lead Wires) No marked defect Char. B: Within ±5% Char. E: Within ±15% Char. F: Within ±20% Per item 4. First the capacitor should be stored at 120+0/-5°C for 60+0/-5 sec. Then, as in the figure, the lead wires should be immersed in solder of 260+0/-5°C up to 1.5 to 2.0mm from the root of terminal for 7.5+0/-1 sec. Pre-treatment: Capacitor should be stored at 85±2°C for 1 hr., then placed at room condition* for 24±2 hrs. before initial measurements. Post-treatment: Capacitor should be stored for 4 to 24 hrs. at room condition.* /, /, /, /, /, /, /, /, /, /, /, /, /, Therm al Screen C apacitor 1.5 to 2.0m m M olten Solder D EB Series Specifications and Test M ethods !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

C 85E.pdf Jul.13,2011 !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. High Voltage Ceramic Capacitors D EC Series (C lass 1, 2/D C 6.3kV) n Features C oated w ith flam e-retardant epoxy resin (equivalent to U L94V-0 standard). Please contact us w hen a halogen-free product* is necessary. * C l=900ppm m ax., Br=900ppm m ax. and C l+Br=1500ppm m ax. n Applications 1. Ideal for use as the ballast in backlighting inverters for liquid crystal displays (SL C har.). 2. Ideal for use on high voltage circuits such as C ockcroft circuits (B C har.). D o not use these products in any autom otive pow er train or safety equipm ent including battery chargers for electric vehicles and plug-in hybrids. O nly M urata products clearly stipulated as "for Autom otive use" on its catalog can be used for autom obile applications such as pow er train and safety equipm ent. D m ax. T m ax. e ø d 25.0 m in. F–1.0 T m ax. <Fig. 1> 4.0 m ax. 25.0 m in. <Fig. 2> Lead Code Coating Extension e C 4 U p to the end of crim p 3.0 m ax. ø d 0.6–0.05 0.6–0.05 Style Fig. 1 Fig. 2 (in m m ) [Bulk] Vertical Crimp Long (Fig. 1) Straight Long (Fig. 2) n Marking BSL E ø 7mm ø 8-9mm ø 10-15mm Temperature Characteristics Nominal Capacitance Capacitance Tolerance Rated Voltage Manufacturer's Identification Manufactured Date Code M arked w ith code for char. B (om itted for nom inal body diam eter ø9m m and under) U nder 100pF: Actual value, 100pF and over: M arked w ith 3 figures M arked w ith code M arked w ith code (for D C 6.3kV, m arked w ith 6KV) M arked w ith (om itted for nom inal body diam eter ø9m m and under) Abbreviation (om itted for nom inal body diam eter ø7m m ) Temp. Char. Nominal Body Diameter 151J 6KV B 102K 6KV 222Z 6KV 47J 6KV 331K 6KV 10J 6KV

C 85E.pdf Jul.13,2011 !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. SL C haracteristics Part Number DC Rated Voltage (V) Capacitance (pF) Body Dia. D (mm) Lead Spacing F (mm) Body Thickness T (mm) D EC 1X3J100JA 3B M S1 6300 10 –5% 7 7.5 7.0 D EC 1X3J100JC 4B M S1 6300 10 –5% 7 10.0 7.0 D EC 1X3J120JA 3B 6300 12 –5% 8 7.5 7.0 D EC 1X3J120JC 4B 6300 12 –5% 8 10.0 7.0 D EC 1X3J150JA 3B 6300 15 –5% 8 7.5 7.0 D EC 1X3J150JC 4B 6300 15 –5% 8 10.0 7.0 D EC 1X3J180JA 3B 6300 18 –5% 9 7.5 7.0 D EC 1X3J180JC 4B 6300 18 –5% 9 10.0 7.0 D EC 1X3J220JA 3B 6300 22 –5% 9 7.5 7.0 D EC 1X3J220JC 4B 6300 22 –5% 9 10.0 7.0 D EC 1X3J270JA 3B 6300 27 –5% 9 7.5 7.0 D EC 1X3J270JC 4B 6300 27 –5% 9 10.0 7.0 D EC 1X3J330JA 3B 6300 33 –5% 9 7.5 7.0 D EC 1X3J330JC 4B 6300 33 –5% 9 10.0 7.0 D EC 1X3J390JA 3B 6300 39 –5% 9 7.5 7.0 D EC 1X3J390JC 4B 6300 39 –5% 9 10.0 7.0 D EC 1X3J470JA 3B 6300 47 –5% 9 7.5 7.0 D EC 1X3J470JC 4B 6300 47 –5% 9 10.0 7.0 D EC 1X3J560JC 4B 6300 56 –5% 10 10.0 7.0 D EC 1X3J680JC 4B 6300 68 –5% 12 10.0 7.0 D EC 1X3J820JC 4B 6300 82 –5% 12 10.0 7.0 D EC 1X3J101JC 4B 6300 100 –5% 13 10.0 7.0 D EC 1X3J121JC 4B 6300 120 –5% 14 10.0 7.0 D EC 1X3J151JC 4B 6300 150 –5% 15 10.0 7.0 B C haracteristics Part Number DC Rated Voltage (V) Capacitance (pF) Body Dia. D (mm) Lead Spacing F (mm) Body Thickness T (mm) D EC B 33J101K C 4B 6300 100 –10% 9 10.0 7.0 D EC B 33J151K C 4B 6300 150 –10% 9 10.0 7.0 D EC B 33J221K C 4B 6300 220 –10% 9 10.0 7.0 D EC B 33J331K C 4B 6300 330 –10% 9 10.0 7.0 D EC B 33J471K C 4B 6300 470 –10% 10 10.0 7.0 D EC B 33J681K C 4B 6300 680 –10% 11 10.0 7.0 D EC B 33J102K C 4B 6300 1000 –10% 13 10.0 7.0 E C haracteristics Part Number DC Rated Voltage (V) Capacitance (pF) Body Dia. D (mm) Lead Spacing F (mm) Body Thickness T (mm) D EC E33J102ZC 4B 6300 1000 +80/-20% 11 10.0 7.0 D EC E33J222ZC 4B 6300 2200 +80/-20% 15 10.0 7.0

C 85E.pdf Jul.13,2011 D EC Series (C lass1, 2 / D C 6.3kV) Specifications and Test M ethods No. Item Operating Temperature Range Specifications -25 to +85°C Test Method within specified range. To be easily legible The capacitor should be visually inspected for evidence of defect. Dimensions should be measured with slide calipers. 3 Marking The capacitor should be visually inspected. The capacitor should not be damaged when DC voltage of 200% of the rated voltage is applied between the lead wires for 1 to 5 sec. (Charge/Discharge currentV50mA) The capacitor is placed in the container with metal balls of diameter 1mm so that each lead wire, short circuited, is kept about 2mm off the metal balls as shown in the figure at right, and DC voltage of 1.3kV is applied for 1 to 5 sec. between capacitor lead wires and metal balls. (Charge/Discharge currentV50mA) Resistance (I.R.) The insulation resistance should be measured with DC500 ±50V within 60±5 sec. of charging. About 2m m M etal balls Q Dissipation Factor (D.F.) Between Lead Wires 10000M Ω min. 6 Capacitance The capacitance should be measured at 20°C with 1±0.2kHz Char. SL: 400+20C*2min. (30pF under) 1000 min. (30pF min.) Char. B, E: 2.5% max. Char. SL: +350 to -1000ppm/°C (Temp. range: +20 to +85°C) Char. B: Within ±10% Char. E: Within +20/-55% The dissipation factor and Q should be measured at 20°C with The capacitance measurement should be made at each step specified in the Table. Pre-treatment: Capacitor should be stored at 85±2°C for 1 hr., then placed at room condition*1 for 24±2 hrs. before measurements. (Char. B, E) Lead wire should not be cut off. Capacitor should not be broken. As shown in the figure at right, fix the body of the capacitor and apply a tensile weight gradually to each lead wire in the radial direction of the capacitor up to 10N and keep it for 10±1 sec. Bending Each lead wire should be subjected to 5N of weight and bent 90°at the point of egress, in one direction, then returned to its original position and bent 90°in the opposite direction at the rate of one bend in 2 to 3 sec. Appearance No marked defect The capacitor should be firmly soldered to the supporting lead wire and vibrated at a frequency range of 10 to 55Hz, 1.5mm in total amplitude, with about a 1-minute rate of vibration change from 10Hz to 55Hz and back to 10Hz. Apply for a total of 6 hrs., 2 hrs. each in 3 mutually perpendicular directions. Lead wire should be soldered with uniform coating on the axial direction over 3/4 of the circumferential direction. The lead wire of a capacitor should be dipped into a ethanol solution of 25wt% rosin and then into molten solder for 2±0.5 sec. In both cases the depth of dipping is up to about 1.5 to 2mm from the root of lead wires. Temp. of solder: Lead Free Solder (Sn-3Ag-0.5Cu) 245±5°C H63 Eutectic Solder 235±5°C Capacitance Within specified tolerance Q D.F. Char. SL: 400+20C*2min. (30pF under) 1000 min. (30pF min.) Char. B, E: 2.5% max. Continued on the following page. Temp. (° C) 2 3 4 5 20±2 -25±3 20±2 85±2 20±2 Step 1 W *1 "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa *2 "C" expresses nominal capacitance value (pF). (Non-Preheat) Appearance Capacitance Change Dielectric Strength (Between Lead Wires) No marked defect Char. SL: Within ±2.5% Char. B: Within ±5% Char. E: Within ±15% Per item 4. The lead wire should be immersed into the melted solder of 350±10°C up to about 1.5 to 2mm from the main body for 3.5±0.5 sec. Pre-treatment: Capacitor should be stored at 85±2°C for 1 hr., then placed at room condition* 1 for 24±2 hrs. before initial measurements. (Char. B, E) Post-treatment: Capacitor should be stored for 1 to 2 hrs. at room condition.*1 (Char. SL) Post-treatment: Capacitor should be stored for 4 to 24 hrs. at room condition.*1 (Char. B, E) D EC Series Specifications and Test M ethods !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

C 85E.pdf Jul.13,2011 D EC Series (C lass1, 2 / D C 6.3kV) Specifications and Test M ethods No. Item Specifications Test Method Steady State) Appearance Capacitance Change Q D.F. No marked defect Char. SL: Within ±5% Char. B: Within ±10% Char. E: Within ±20% Char. SL: 275+5/2C*2min. (30pF under) 350 min. (30pF min.) Char. B, E: 5.0% max. I.R. 1000M Ω min. Set the capacitor for 500+24/-0 hrs. at 40±2°C in 90 to 95% relative humidity. Pre-treatment: Capacitor should be stored at 85±2°C for 1 hr., then placed at room condition*1 for 24±2 hrs. before initial measurements. (Char. B, E) Post-treatment: Capacitor should be stored for 1 to 2 hrs. at room condition.*1 Appearance No marked defect Capacitance Change Char. SL: Within ±7.5% Char. B: Within ±10% Char. E: Within ±20% Q Char. SL: 100+10/3C*2min. (30pF under) 200 min. (30pF min.) I.R. 500M Ω min. Apply the rated voltage for 500+24/-0 hrs. at 40±2°C in 90 to 95% relative humidity. (Charge/Discharge currentV50mA.) Pre-treatment: Capacitor should be stored at 85±2°C for 1 hr., then placed at room condition*1 for 24±2 hrs. before initial measurements. (Char. B, E) Post-treatment: Capacitor should be stored for 1 to 2 hrs. at room condition.*1 (Char. SL) Post-treatment: Capacitor should be stored at 85±2°C for 1 hr., then placed at room condition*1 for 24±2 hrs. (Char. B, E) Appearance No marked defect Capacitance Change Char. SL: Within ±3% Char. B: Within ±10% Char. E: Within ±20% Q Char. SL: 275+5/2C*2min. (30pF under) 350 min. (30pF min.) I.R. 2000M Ω min. Apply a DC voltage of 150% of the rated voltage for 1000+48/-0 hrs. at 85±2°C with a relative humidity of 50% max. (Charge/Discharge currentV50mA.) Pre-treatment: Capacitor should be stored at 85±2°C for 1 hr., then placed at room condition*1 for 24±2 hrs. before initial measurements. (Char. B, E) Post-treatment: Capacitor should be stored for 1 to 2 hrs. at room condition.*1 (Char. SL) Post-treatment: Capacitor should be stored at 85±2°C for 1 hr., then placed at room condition*1 for 24±2 hrs. (Char. B, E) Temperature and Immersion Cycle Appearance No marked defect Capacitance Change Char. SL: Within ±3% Char. B: Within ±10% Char. E: Within ±20% Q Char. SL: 275+5/2C*2min. (30pF under) 350 min. (30pF min.) I.R. 2000M Ω min. Dielectric Strength (Between Lead Wires) Per item 4. The capacitor should be subjected to 5 temperature cycles, then consecutively to 2 immersion cycles. <Temperature Cycle> Cycle time: 5 cycles <Immersion Cycle> Cycle time: 2 cycles Pre-treatment: Capacitor should be stored at 85±2°C for 1 hr., then placed at room condition*1 for 24±2 hrs. before initial measurements. (Char. B, E) Post-treatment: Capacitor should be stored for 4 to 24 hrs. at room condition.*1 *1 "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa *2 "C" expresses nominal capacitance value (pF). Continued from the preceding page. Time (min) -25±3 30 2 Room Temp. 3 3 85±3 30 4 Room Temp. 3 Step Temperature (° C) Time (min) 1 65+5/-0 Clean water15 2 0±3 Salt water15 Step Temperature (° C) Immersion Water (On-Preheat) Appearance Capacitance Change Dielectric Strength (Between Lead Wires) No marked defect Char. SL: Within ±2.5% Char. B: Within ±5% Char. E: Within ±15% Per item 4. First the capacitor should be stored at 120+0/-5°C for 60+0/-5 sec. Then, as in the figure, the lead wires should be immersed in solder of 260+0/-5°C up to 1.5 to 2.0mm from the root of terminal for 7.5+0/-1 sec. Pre-treatment: Capacitor should be stored at 85±2°C for 1 hr., then placed at room condition* 1 for 24±2 hrs. before initial measurements. (Char. B, E) Post-treatment: Capacitor should be stored for 1 to 2 hrs. at room condition.*1 (Char. SL) Post-treatment: Capacitor should be stored for 4 to 24 hrs. at room condition.*1 (Char. B, E) /, /, /, /, /, /, /, /, /, /, /, /, /, Therm al Screen C apacitor 1.5 to 2.0m m M olten Solder D EC Series Specifications and Test M ethods !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

C 85E.pdf Jul.13,2011 !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. High Voltage Ceramic Capacitors D EF Series (O nly for LC D B acklight Inverter C ircuit/6.3kVp-p) n Features 1. C om pact size: D iam eter is 20% less than D EC series. 2. Low self-heating at high frequency and high voltage due to low dielectric loss of the ceram ic m aterial. 3. O perating tem perature range is guaranteed up to 105 degrees C . 4. C oated w ith flam e-retardant epoxy resin (equivalent to U L94V-0 standard). Please contact us w hen a halogen-free product* is necessary. * C l=900ppm m ax., Br=900ppm m ax. and C l+Br=1500ppm m ax. 5. Taping available for autom atic insertion. n Applications Ideal for use in LC D backlight inverters. D o not use these products in any autom otive pow er train or safety equipm ent including battery chargers for electric vehicles and plug-in hybrids. O nly M urata products clearly stipulated as "for Autom otive use" on its catalog can be used for autom obile applications such as pow er train and safety equipm ent. Lead Code Coating Extension e A3 U p to the end of crim p (in m m ) ø d 0.6–0.05 D m ax. T m ax. 4.0 m ax. 25.0 m in. e ø dF–1.0 [Bulk] Vertical Crimp Long (A3) D m ax. T m ax. 4.0 m ax. 3.5–0.5 F–0.8 e ø d 1.0 (in m m ) Lead Code Coating Extension e J3 U p to the end of crim p ø d 0.6–0.05 [Bulk] Vertical Crimp Short (J3) n Marking SL ø 7-9mm Temperature Characteristics Nominal Capacitance Capacitance Tolerance Rated Voltage Manufactured Date Code Actual value M arked w ith code M arked w ith code (M arked w ith 6K~) Abbreviation U pper horizontal line – Temp. Char. Nominal Body Diameter 33J 6K~ CH 10J 6K~ SL C haracteristics Part Number Rated Voltage (Vp-p) Capacitance (pF) Body Dia. D (mm) Lead Spacing F (mm) Body Thickness T (mm) Lead Package Long Bulk Lead Package Short Bulk Lead Package Taping D EF1XLH 100Jppp 6300 10 –5% 7 7.5 6.0 A3B J3B N3A D EF1XLH 120Jppp 6300 12 –5% 7 7.5 6.0 A3B J3B N3A D EF1XLH 150Jppp 6300 15 –5% 7 7.5 6.0 A3B J3B N3A D EF1XLH 180Jppp 6300 18 –5% 7 7.5 6.0 A3B J3B N3A D EF1XLH 220Jppp 6300 22 –5% 7 7.5 6.0 A3B J3B N3A D EF1XLH 270Jppp 6300 27 –5% 8 7.5 6.0 A3B J3B N3A D EF1XLH 330Jppp 6300 33 –5% 9 7.5 6.0 A3B J3B N3A D EF1XLH 390Jppp 6300 39 –5% 9 7.5 6.0 A3B J3B N3A D EF1XLH 470Jppp 6300 47 –5% 9 7.5 6.0 A3B J3B N3A Three blank colum ns are filled w ith the lead and packaging codes. Please refer to the three colum ns on the right for the appropriate code.

C 85E.pdf Jul.13,2011 !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C H C haracteristics Part Number Rated Voltage (Vp-p) Capacitance (pF) Body Dia. D (mm) Lead Spacing F (mm) Body Thickness T (mm) Lead Package Long Bulk Lead Package Short Bulk Lead Package Taping D EF2C LH 020C ppp 6300 2 –0.25pF 7 7.5 6.0 A3B J3B N3A D EF2C LH 030C ppp 6300 3 –0.25pF 7 7.5 6.0 A3B J3B N3A D EF2C LH 040C ppp 6300 4 –0.25pF 7 7.5 6.0 A3B J3B N3A D EF2C LH 050D ppp 6300 5 –0.5pF 7 7.5 6.0 A3B J3B N3A D EF2C LH 060D ppp 6300 6 –0.5pF 7 7.5 6.0 A3B J3B N3A D EF2C LH 070D ppp 6300 7 –0.5pF 8 7.5 6.0 A3B J3B N3A D EF2C LH 080D ppp 6300 8 –0.5pF 8 7.5 6.0 A3B J3B N3A D EF2C LH 090D ppp 6300 9 –0.5pF 8 7.5 6.0 A3B J3B N3A D EF2C LH 100Jppp 6300 10 –5% 8 7.5 6.0 A3B J3B N3A Three blank colum ns are filled w ith the lead and packaging codes. Please refer to the three colum ns on the right for the appropriate code.

C 85E.pdf Jul.13,2011 Continued on the following page. Step Temp. (°C) 20–2 -25–3 20–2 85–2 20–2 "R oom condition" Tem perature: 15 to 35°C , R elative hum idity: 45 to 75% , Atm ospheric pressure: 86 to 106kPa "C " expresses nom inal capacitance value (pF). D EF Series (O nly for LC D B acklight Inverter C ircuit / 6.3kVp-p) Specifications and Test M ethods The lead w ire should be im m ersed into the m elted solder of 350–10°C up to about 1.5 to 2.0m m from the m ain body for 3.5–0.5 sec. Post-treatm ent: C apacitor should be stored for 1 to 2 hrs. at room condition.* (Non-Preheat) Appearance N o m arked defect Capacitance Change W ithin –2.5% Dielectric Strength (Between Lead Wires) Per item 4. The lead w ire of a capacitor should be dipped into a ethanol solution of 25w t% rosin and then into m olten solder for 2–0.5 sec. In both cases the depth of dipping is up to about 1.5 to 2.0m m from the root of lead w ires. Tem p. of solder: Lead Free Solder (Sn-3Ag-0.5C u) 245–5°C H 63 Eutectic Solder 235–5°C Lead w ire should be soldered w ith uniform coating on the axial direction over 3/4 of the circum ferential direction. The capacitor should be firm ly soldered to the supporting lead w ire and vibrated at a frequency range of 10 to 55H z, 1.5m m in total am plitude, w ith about a 1-m inute rate of vibration change from 10H z to 55H z and back to 10H z. Apply for a total of 6 hrs., 2 hrs. each in 3 m utually perpendicular directions. Appearance N o m arked defect Capacitance W ithin specified tolerance Q 400+20C * m in. (30pF under) 1000 m in. (30pF m in.) As show n in the figure at right, fix the body of the capacitor and apply a tensile w eight gradually to each lead w ire in the radial direction of the capacitor up to 10N and keep it for 10–1 sec.9 Strength of Lead Pull Lead w ire should not be cut off. C apacitor should not be broken. Bending Each lead w ire should be subjected to 5N of w eight and bent 90° at the point of egress, in one direction, then returned to its original position and bent 90° in the opposite direction at the rate of one bend in 2 to 3 sec. The capacitance m easurem ent should be m ade at each step specified in the Table. C har. C H : 0–60ppm /°C C har. SL: +350 to -1000ppm /°C (Tem p. range: +20 to +85°C ) The Q should be m easured at 20°C w ith 1–0.2M H z and AC 5V(r.m .s.) m ax.7 Q 400+20C * m in. (30pF under) 1000 m in. (30pF m in.) The capacitance should be m easured at 20°C w ith 1–0.2M H z and AC 5V(r.m .s.) m ax.6 Capacitance W ithin specified tolerance The insulation resistance should be m easured w ith D C 500–50V w ithin 60–5 sec. of charging.5 Insulation Resistance (I.R.) Between Lead Wires 10000M Ω m in. The capacitor should not be dam aged w hen D C 12.6kV is applied betw een the lead w ires for 1 to 5 sec. (C harge/D ischarge currentV50m A) Body Insulation N o failure The capacitor is placed in the container w ith m etal balls of diam eter 1m m so that each lead w ire, short circuited, is kept about 2.0m m off the m etal balls as show n in the figure at right, and D C voltage of 1.3kV is applied for 1 to 5 sec. betw een capacitor lead w ires and m etal balls. (C harge/D ischarge currentV50m A) The capacitor should be visually inspected.3 Marking To be easily legible The capacitor should be visually inspected for evidence of defect. D im ensions should be m easured w ith slide calipers.2 Appearance and Dimensions N o visible defect, and dim ensions are w ithin specified range.

1 Operating Temperature Range -25 to +105°C

No. Test MethodSpecificationsItem About 2.0m m M etal balls W D EF Series Specifications and Test M ethods !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

C 85E.pdf Jul.13,2011 "R oom condition" Tem perature: 15 to 35°C , R elative hum idity: 45 to 75% , Atm ospheric pressure: 86 to 106kPa "C " expresses nom inal capacitance value (pF). Apply 6.3kVp-p at the frequency in the Table for 1000+48/-0 hrs. at 105–2°C w ith a relative hum idity of 50% m ax. (C harge/D ischarge currentV50m A.) <Frequency> Post-treatm ent: C apacitor should be stored for 1 to 2 hrs. at room condition.*

16 Life

Appearance N o m arked defect Q 200+10C * m in. (10pF under) 275+5/2C * m in. (10pF m in. and 30pF under) 350 m in. (30pF m in.) Capacitance Change W ithin –3% I.R. 2000M Ω m in. Set the capacitor for 500 +24/-0 hrs. at 40–2°C in 90 to 95% relative hum idity. Post-treatm ent: C apacitor should be stored for 1 to 2 hrs. at room condition.* Steady State) Appearance N o m arked defect Q 200+10C * m in. (10pF under) 275+5/2C * m in. (10pF m in. and 30pF under) 350 m in. (30pF m in.) Capacitance Change W ithin –5% I.R. 1000M Ω m in. The capacitor should be subjected to 5 tem perature cycles, then consecutively to 2 im m ersion cycles. <Tem perature C ycle> C ycle tim e: 5 cycles <Im m ersion C ycle> C ycle tim e: 2 cycles Post-treatm ent: C apacitor should be stored for 4 to 24 hrs. at room condition.* Temperature and Immersion Cycle Appearance N o m arked defect I.R. 2000M Ω m in. Q 200+10C * m in. (10pF under) 275+5/2C * m in. (10pF m in. and 30pF under) 350 m in. (30pF m in.) Capacitance Change W ithin –3% Dielectric Strength (Between Lead Wires) Per item 4. First the capacitor should be stored at 120+0/-5°C for 60+0/-5 sec. Then, as in the figure, the lead w ires should be im m ersed in solder of 260+0/-5°C up to 1.5 to 2.0m m from the root of term inal for 7.5+0/-1 sec. Post-treatm ent: C apacitor should be stored for 1 to 2 hrs. at room condition.* (On-Preheat) Appearance N o m arked defect Capacitance Change W ithin –2.5% Dielectric Strength (Between Lead Wires) Per item 4. Capacitance (pF) Frequency (kHz) 100 to 10 12 to 22 27 to 47 Step Temperature (°C) -25–3 R oom Tem p. 105–3 R oom Tem p. Time (min) Step Temperature (°C) 65+5/-0 0–3 Time (min) Immersion Water C lean w ater Salt w ater D EF Series (O nly for LC D B acklight Inverter C ircuit / 6.3kVp-p) Specifications and Test M ethods /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, Therm al Screen C apacitor 1.5 to 2.0m m M olten Solder Continued from the preceding page. No. Test MethodSpecificationsItem D EF Series Specifications and Test M ethods !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

C 85E.pdf Jul.13,2011 H igh Voltage C eram ic C apacitors C haracteristics D ata (Typical Exam ple) !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. n Capacitance - Temperature Characteristics -30 -20 -10 -40 -20 0 20 40 60 80 100 120 140 Tem perature (°C ) C ap. C hange (% ) D C R R C D CH, SL, B, E, F char. C, D, R char. -100 -90 -80 -70 -60 -50 -40 -30 -20 -10 -40 -20 0 20 40 60 80 100 120 Tem p. (°C ) B E FF SL SL C ap. C hange (% ) C H E B C H n Capacitance - DC Bias Characteristics 0 500 1000 1500 2000 -20 -40 -60 -80 -100 D EA1X3D 221JA2B D EH R 33D 102KA3B D EBB33D 102KA2B D EBE33D 222ZA2B D C Bias (V) C ap. C hange (% ) D ESD 33A471KA2B

C 85E.pdf Jul.13,2011 Item Pitch of component Pitch of sprocket hole Lead spacing Length from hole center to component center Length from hole center to lead Body diameter Deviation along tape, left or right Carrier tape width Position of sprocket hole Lead distance between reference and bottom planes Protrusion length Diameter of sprocket hole Lead diameter Total tape thickness Total thickness, tape and lead wire Body thickness Portion to cut in case of defect Hold down tape width Hold down tape position Coating extension on lead Deviation across tape, front Deviation across tape, rear P F D W W 1 H H 0 r φD 0 φd T L W 0 W 2 e ∆h1 ∆h2 15.0–2.0 20.0 15.0–0.3 7.5–1.0 7.5–1.5 3.75–1.0 0–2.0 0–1.0 30.0–2.0 See the individual product specifications. 18.0–0.5 9.0–0.5 18.0 2.0 m ax. 1.0 m ax. (in : m m ) P3 N3 N7Code 12.7–0.3 5.0 6.35–1.3 3.85–0.7 12.7–1.0 N2P2 +0.8 –0.2 +1.5 –1.0 +2.0 +0.5 to -1.0 4.0–0.1 0.6–0.05 0.6–0.3 1.5 m ax. See the individual product specifications. 11.0 11.5 m in. 1.5–1.5 3.0 m ax. (Vertical crim p type: U p to the end of crim p) –1.0 15.0m m pitch / lead spacing 7.5m m taping Straight type (Lead C ode: P3) 15.0m m pitch / lead spacing 7.5m m taping Vertical crim p type (Lead C ode: N 3) L P2 P D F ød øD 0R W 0 W 1 W H W 2 L F ød øD 0 R W 0 W 2 W 1 W H 0 e P D L P D ∆S F ød øD 0 R W 0 W 1 W H 0 e W 2 30.0m m pitch / lead spacing 7.5m m taping Vertical crim p type (Lead C ode: N 7) L P D ∆S F ød øD 0 R W 0 W 2 W 1 W H 0 e 12.7m m pitch / lead spacing 5.0m m taping Vertical crim p type (Lead C ode: N 2) L P D ∆S F ød øD 0 R W 0 W 2 W 1 W H e 12.7m m pitch / lead spacing 5.0m m taping Straight type (Lead C ode: P2) n Taping Specifications C ontinued on the follow ing page. T m ax. ∆h1 ∆h2 O ∗M arked side 3.0 m ax. Lead C ode N 2, N 3, N 7 H 0 Lead C ode P2, P3 4.0 m ax. Lead C ode N 3 Except D EF Series D EF Series H 0 ∗t2 +1.5 –1.020.0 +2.0 –018.0 e H igh Voltage C eram ic C apacitors Packaging !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

C 85E.pdf Jul.13,2011 TapingBulk Polyethylene Bag Am m o Pack n Minimum Quantity (Order in Sets Only) n Packaging Styles C ontinued from the preceding page. *1 Lead Spacing F=5.0m m (C ode: A2): 500pcs. *2 R ated Voltage D C 500V (C ode: 2H ): 250pcs. *3 R ated Voltage D C 500V (C ode: 2H ): 500pcs. D ES Series D EH Series D EA Series D EB Series D EC Series D EF Series 4.5 to 6 8 to 11 13, 14 15 to 18 19 to 21 7 to 9 10, 11 12 to 15 Body Dia. D (mm) 500 250 *1 250 200 *2 200 100 250 100 100 Lead Code Ap, Cp 500 500 500 250 *3 250 200 100 500 Lead Code Bp, Dp, Jp Long Short [Bulk] (pcs./Bag) *4 R ated Voltage D C 1kV (C ode: 3A): 1,000pcs. D ES Series D EH Series D EA Series D EB Series D EF Series 1,500 1,500 1,500 1,500 1,000 900 *4 900 *4 900 *4 900 Lead Code N2, P2 N3, P3 N7 500 500 500 500 [Taping] (pcs./Am m o Pack) H igh Voltage C eram ic C apacitors Packaging !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

C 85E.pdf Jul.13,2011 W hen D C -rated capacitors are to be used in AC or ripple current circuits, be sure to m aintain the Vp-p value of the applied voltage or the Vo-p that contains D C bias w ithin the rated voltage range. W hen the voltage is applied to the circuit, starting or stopping m ay generate irregular voltage for a transit period because of resonance or sw itching. Be sure to use a capacitor w ith a rated voltage range that includes these irregular voltages. W hen using the low -dissipation D EA (SL C har.) /D EC (SL C har.) /D EH (C , R C har.) /D ES (D C har.) series in a high- frequency and high-voltage circuit, be sure to read the instructions in item 4. W hen D C -rated capacitors are to be used in input circuits from com m ercial pow er source (AC filter), be sure to use Safety C ertified C apacitors because various regulations on w ithstand voltage or im pulse w ithstand established for each type of equipm ent should be taken into consideration. Keep the surface tem perature of a capacitor below the upper lim it of its rated operating tem perature range. Be sure to take into account the heat generated by the capacitor itself. W hen the capacitor is used in a high- frequency current, pulse current or sim ilar current, it m ay self-generate heat due to dielectric loss. The frequency of the applied sine w ave voltage should be less than 300kH z. The applied voltage load (*) should be such that the capacitor's self-generated heat is w ithin 20°C in an atm ospheric tem perature of 25°C . W hen m easuring, use a therm ocouple of sm all therm al capacity-K of ø0.1m m in conditions w here the capacitor is not affected by radiant heat from other com ponents or surrounding am bient fluctuations. Excessive heat m ay lead to deterioration of the capacitor's characteristics and reliability. (N ever attem pt to perform m easurem ent w ith the cooling fan running. O therw ise, accurate m easurem ent cannot be ensured.) *Before using the low -dissipation D EA/D EC (SL C har.) /D EH /D ES series, be sure to read the instructions in item 4. Voltage Positional Measurement DC Voltage DC+AC Voltage AC Voltage Pulse Voltage (1) Pulse Voltage (2) V0-p V0-p Vp-p Vp-p Vp-p 1. Operating Voltage <DES/DEH/DEA/DEB/DEC Series> 2. Operating Temperature and Self-generated Heat W hen the capacitor is broken, failure m ay result in a short circuit. Be sure to provide an appropriate fail-safe function like a fuse on your product if failure could follow an electric shock, fire or fum e. 3. Fail-Safe Continued on the following page. n !Caution (Rating) H igh Voltage C eram ic C apacitors !C aution !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

C 85E.pdf Jul.13,2011 D ue to the low self-heating characteristics of low - dissipation capacitors, the allow able electric pow er of these capacitors is generally m uch higher than that of B characteristic capacitors. H ow ever, if the self-heating tem perature is 20°C under a high-frequency voltage w hose peak-to-peak value equals the capacitor's rated voltage, the capacitor's pow er consum ption m ay exceed its allow able electric pow er. Therefore, w hen using the D EA/D EC (SL C har.) /D EH /D ES series in a high-frequency and high-voltage circuit w ith a frequency of 1kH z or higher, m ake sure that the Vp-p values including the D C bias, do not exceed the applied voltage value specified in Table 1. Also m ake sure that the self-heating tem perature (the difference betw een the capacitor's surface tem perature and the capacitor's am bient tem perature) at an am bient tem perature of 25°C does not exceed the value specified in Table 1. As show n in Fig. 2, the self-heating tem perature depends on the am bient tem perature. Therefore, if you are not able to set the am bient tem perature to approxim ately 25°C , please contact our sales representatives or product engineers. W e are offering free softw are, The C apacitor Selection Tool: by Voltage Form , w hich w ill assist you in selecting a suitable capacitor. The softw are can be dow nloaded from M urata's W eb site (http://w w w .m urata.com /products/design_support/m m csv/ index.htm l). By inputting capacitance values and applied voltage w aveform of the specific capacitor series, this softw are w ill calculate the capacitor's pow er consum ption and list suitable capacitors. W hen the result of this softw are is different from the m easurem ent result of the self-heating tem perature on your side, please contact our sales representatives or product engineers. FAILURE TO FOLLOW THE ABOVE CAUTIONS (ITEMS 1 TO 4) MAY RESULT, WORST CASE, IN A SHORT CIRCUIT AND CAUSE FUMING OR PARTIAL DISPERSION WHEN THE PRODUCT IS USED. 4. Load Reduction and Self-generated Heat During Application of High-frequency and High-voltage <Table 1> Allowable Conditions at High frequency <Fig. 1> Relationship Between Applied Voltage and Self-heating Temperature (Allowable Self-heating Temp. at 25°C Ambient Temp.) Allowable Conditions at High-frequency *3 Series Temp. Char. DC Rated Voltage Applied Voltage (Max.) Self-heating Temp. (25°C Ambient Temp.) *1 Capacitor's Ambient Temp. *2 D EH D EA C R SL 500V 1kV 2kV 3.15kV 1kV 2kV 3.15kV 500Vp-p 800Vp-p 1000Vp-p 1400Vp-p 2000Vp-p 1600Vp-p 3150Vp-p 1000Vp-p 2000Vp-p 3150Vp-p 20°C M ax. 20°C M ax. 5°C M ax. 20°C M ax. 5°C M ax. 20°C M ax. 5°C M ax. 5°C M ax. 6.3kV 6300Vp-pD EC SL 5°C M ax. D ES D 500V 500Vp-p 15°C M ax. 1kV 800Vp-p 1000Vp-p 5°C M ax. -25 to +85°C D EH Series R C har. (R ated Voltage: D C 1kV to 3.15kV) 100 1000 10000 Applied Voltage (Vp-p) Allow able Self-heating Tem p. (°C ) R ated Voltage: 1kV 2kV 3.15kV *1 Fig. 1 show s the relationship betw een the applied voltage and the allow able self- heating tem perature regarding 1 to 3.15kV rated voltage of the D EH series R characteristic and 1kV rated voltage of the D ES series D characteristic. *2 W hen the am bient tem perature is 85 to 125°C , the applied voltage needs to be further reduced. If the D EA/D EH /D ES series needs to be used at an am bient tem perature of 85 to 125°C , please contact our sales representatives or product engineers. *3 Fig. 3 show s reference data on the allow able voltage - frequency characteristics for a sine w ave voltage. D ES Series D C har. (R ated Voltage: D C 1kV) 100 1000 10000 Applied Voltage (Vp-p) Allow able Self-heating Tem p. (°C ) R ated Voltage: D C 1kV Continued from the preceding page. Continued on the following page. H igh Voltage C eram ic C apacitors !C aution !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

C 85E.pdf Jul.13,2011 <Fig. 2> Dependence of Self-heating Temperature on Ambient Temperature 0 20 40 60 80 100 Am bient Tem perature (°C ) Self-heating Tem perature (°C ) (25) C C har. (500V) R C har. (1 to 3.15kV) 0 20 40 60 80 100 Am bient Tem perature (°C ) Self-heating Tem perature (°C ) (25) SL C har. (1 to 6.3kV) D ES Series D C har. (R ated Voltage: D C 500V to 1kV) 0 20 40 60 80 100 Am bient Tem perature (°C ) Self-heating Tem perature (°C ) (25) D C har. (500V to 1kV) Continued from the preceding page. Continued on the following page. H igh Voltage C eram ic C apacitors !C aution !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

C 85E.pdf Jul.13,2011 D EH Series R C har. (R ated Voltage: D C 1kV) 100 1 10 100 1000 1000 10000 Frequency (kH z) Allow able Voltage (Vp-p) 1000pF 220pF 470pF 2200pF 4700pF D EH Series R C har. (R ated Voltage: D C 2kV) 100 1 10 100 1000 1000 10000 Frequency (kH z) Allow able Voltage (Vp-p) 220pF 470pF 1000pF 2200pF 4700pF D EH Series R C har. (R ated Voltage: D C 3.15kV) 100 1 10 100 1000 1000 10000 (3150) Frequency (kH z) Allow able Voltage (Vp-p) 220pF 470pF 1000pF 2200pF Because of the influence of harm onics, w hen the applied voltage is a rectangular w ave or pulse w ave voltage (instead of a sine w ave voltage), the heat generated by the capacitor is higher than the value obtained by application of the sine w ave w ith the sam e fundam ental frequency. R oughly calculated for reference, the allow able voltage for a rectangular w ave or pulse w ave corresponds approxim ately to the allow able voltage for a sine w ave w hose fundam ental frequency is tw ice as large as that of the rectangular w ave or pulse w ave. This allow able voltage, how ever, varies depending on the voltage and current w aveform s. Therefore, you are requested to m ake sure that the self- heating tem perature is not higher than the value specified in Table 1. <Fig. 3> Allowable Voltage (Sine Wave Voltage) - Frequency Characteristics (At Ambient Temperature of 85°C or less) D EH Series C C har. (R ated Voltage: D C 500V) 100 1 10 100 1000 1000 (500) 10000 Frequency (kH z) Allow able Voltage (Vp-p) to 470pF 2200pF 1000pF 4700pF D EA Series SL C har. (R ated Voltage: D C 2kV) 100 1 10 100 1000 1000 10000 Frequency (kH z) Allow able Voltage (Vp-p) 10pF 100pF 220pF 470pF D EA Series SL C har. (R ated Voltage: D C 1kV) 100 1 10 100 1000 1000 10000 Frequency (kH z) Allow able Voltage (Vp-p) to 100pF 220pF 470pF Continued from the preceding page. Continued on the following page. H igh Voltage C eram ic C apacitors !C aution !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

C 85E.pdf Jul.13,2011 D EA Series SL C har. (R ated Voltage: D C 3.15kV) 100 1 10 100 1000 1000 (3150) 10000 Frequency (kH z) Allow able Voltage (Vp-p) 10pF 220pF 100pF D EC Series SL C har. (R ated Voltage: D C 6.3kV) 100 1 10 100 1000 1000 10000 Frequency (kH z) Allow able Voltage (Vp-p) Because of the influence of harm onics, w hen the applied voltage is a rectangular w ave or pulse w ave voltage (instead of a sine w ave voltage), the heat generated by the capacitor is higher than the value obtained by application of the sine w ave w ith the sam e fundam ental frequency. R oughly calculated for reference, the allow able voltage for a rectangular w ave or pulse w ave corresponds approxim ately to the allow able voltage for a sine w ave w hose fundam ental frequency is tw ice as large as that of the rectangular w ave or pulse w ave. This allow able voltage, how ever, varies depending on the voltage and current w aveform s. Therefore, you are requested to m ake sure that the self- heating tem perature is not higher than the value specified in Table 1. <Fig. 3 (continued)> Allowable Voltage (Sine Wave Voltage) - Frequency Characteristics (At Ambient Temperature of 85°C or less) Continued on the following page. to 22pF 47pF 100pF (6300) 100 1 10 100 1000 1000 (500) 10000 to 1000pF 4700pF 2200pF 100 1 10 100 1000 1000 10000 100pF 470pF 220pF 1000pF 2200pF 4700pF D ES Series D C har. (R ated Voltage: D C 1kV) Frequency (kH z) Allow able Voltage (Vp-p) D ES Series D C har. (R ated Voltage: D C 500V) Frequency (kH z) Allow able Voltage (Vp-p) Continued from the preceding page. H igh Voltage C eram ic C apacitors !C aution !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

C 85E.pdf Jul.13,2011 The frequency of the applied sine w ave voltage should be less than 100kH z. The applied voltage should be less than the value show n in the figure below . For non-sine w ave that includes a harm onic frequency, please contact our sales representatives or product engineers. Keep the surface tem perature of a capacitor below the upper lim it of its rated operating tem perature range. Be sure to take into account the heat generated by the capacitor itself. W hen the capacitor is used in a high- frequency current, pulse current or sim ilar current, it m ay self-generate heat due to dielectric loss. Excessive heat m ay lead to deterioration of the capacitor's characteristics and reliability. (N ever attem pt to perform m easurem ent w ith the cooling fan running. O therw ise, accurate m easurem ent cannot be ensured.) Voltage Positional Measurement AC Voltage Vp-p 1. Operating Voltage <DEF Series> 2. Operating Temperature and Self-generated Heat W hen the capacitor is broken, failure m ay result in a short circuit. Be sure to provide an appropriate fail-safe function like a fuse on your product if failure could result in an electric shock, fire or fum e. 3. Fail-Safe The tem perature of the surface of the capacitor: below the upper lim it of its rated operating tem perature range (including self-heating). 12 to 22pF to 10pF 27 to 47pF The capacitor can be applied at a m axim um of 6.3kVp-p at 100kH z w hen the lam p is turned on. Continued from the preceding page. 1000 1 10 100 10000 Frequency (kH z) Allow able Voltage (Vp-p) (6300) H igh Voltage C eram ic C apacitors !C aution !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

C 85E.pdf Jul.13,2011 H igh Voltage C eram ic C apacitors !C aution !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. n !Caution (Storage and Operating Condition) n !Caution (Soldering and Mounting) n !Caution (Handling) Vibration and Im pact D o not expose a capacitor or its lead w ires to excessive shock or vibration during use. Excessive shock or vibration m ay cause fatigue destruction of lead w ires m ounted on the circuit board. Please take m easures to hold a capacitor on the circuit boards by adhesive, m olding resin or another coating. Please confirm there is no influence of holding m easures on the product w ith the intended equipm ent. FAILU R E TO FO LLO W TH E ABO VE C AU TIO N S M AY R ESU LT, W O R ST C ASE, IN A SH O R T C IR C U IT AN D C AU SE FU M IN G O R PAR TIAL D ISPER SIO N W H EN TH E PR O D U C T IS U SED . O perating and Storage Environm ent The insulating coating of capacitors does not form a perfect seal; therefore, do not use or store capacitors in a corrosive atm osphere, especially w here chloride gas, sulfide gas, acid, alkali, salt or the like are present. Also, avoid exposure to m oisture. Before cleaning, bonding or m olding this product, verify that these processes do not affect product quality by testing the perform ance of a cleaned, bonded or m olded product in the intended equipm ent. Store the capacitors w here the tem perature and relative hum idity do not exceed -10 to 40 degrees centigrade and 15 to 85% . U se capacitors w ithin 6 m onths after delivery. C heck the solderability after 6 m onths or m ore. FAILU R E TO FO LLO W TH E ABO VE C AU TIO N S M AY R ESU LT, W O R ST C ASE, IN A SH O R T C IR C U IT AN D C AU SE FU M IN G O R PAR TIAL D ISPER SIO N W H EN TH E PR O D U C T IS U SED . 1. Vibration and Im pact D o not expose a capacitor or its lead w ires to excessive shock or vibration during use. Excessive shock or vibration m ay cause fatigue destruction of lead w ires m ounted on the circuit board. Please take m easures to hold a capacitor on the circuit boards by adhesive, m olding resin or another coating. Please confirm there is no influence of holding m easures on the product w ith the intended equipm ent. 2. Soldering W hen soldering this product to a PC B/PW B, do not exceed the solder heat resistance specification of the capacitor. Subjecting this product to excessive heating could m elt the internal junction solder and m ay result in therm al shocks that can crack the ceram ic elem ent. Soldering the capacitor w ith a soldering iron should be perform ed in follow ing conditions. Tem perature of iron-tip: 400 degrees C . m ax. Soldering iron w attage: 50W m ax. Soldering tim e: 3.5 sec. m ax. 3. Bonding, R esin M olding and C oating For bonding, m olding or coating this product, verify that these processes do not affect the quality of the capacitor by testing the perform ance of the bonded, m olded or coated product in the intended equipm ent. W hen the am ount of applications, dryness/hardening conditions of adhesives and m olding resins containing organic solvents (ethyl acetate, m ethyl ethyl ketone, toluene, etc). are unsuitable, the outer coating resin of a capacitor is dam aged by the organic solvents and it m ay result, w orst case, in a short circuit. The variation in thickness of adhesive, m olding resin or coating m ay cause outer coating resin cracking and/or ceram ic elem ent cracking of a capacitor in a tem perature cycling. 4. Treatm ent after Bonding, R esin M olding and C oating W hen the outer coating is hot (over 100 degrees C .) after soldering, it becom es soft and fragile. Therefore, please be careful not to give it m echanical stress. FAILU R E TO FO LLO W TH E ABO VE C AU TIO N S M AY R ESU LT, W O R ST C ASE, IN A SH O R T C IR C U IT AN D C AU SE FU M IN G O R PAR TIAL D ISPER SIO N W H EN TH E PR O D U C T IS U SED .

C 85E.pdf Jul.13,2011 H igh Voltage C eram ic C apacitors N otice !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. n Notice (Soldering and Mounting) C leaning (ultrasonic cleaning) To perform ultrasonic cleaning, observe the follow ing conditions. R inse bath capacity: O utput of 20 w atts per liter or less. R insing tim e: 5 m in. m axim um . D o not vibrate the PC B/PW B directly. Excessive ultrasonic cleaning m ay lead to fatigue destruction of the lead w ires. n Notice (Rating) C apacitance C hange of C apacitors 1. D EA/D EC /D EF Series (Tem p. C har. C H , SL) C apacitance m ight change a little depending on the surrounding tem perature or an applied voltage. Please contact us if you intend to use this product in a strict tim e constant circuit. 2. D EB/D EC Series (Tem p. C har. B, E, F) C apacitors have an aging characteristic, w hereby the capacitor continually decreases its capacitance slightly if the capacitor is left on for a long tim e. M oreover, capacitance m ight change greatly depending on the surrounding tem perature or an applied voltage. Therefore, it is not likely to be suitable for use in a tim e constant circuit. Please contact us if you need detailed inform ation. 3. D EH /D ES Series C apacitance m ight change greatly depending on the surrounding tem perature or an applied voltage. Therefore, it is not likely to be suitable for use in a tim e constant circuit. Please contact us if you need detailed inform ation.

C 85E.pdf Jul.13,2011 !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Safety Standard Certified Ceramic Capacitors for Automotive Type K J -IEC 60384-14 C lass X1, Y2- n Features 1. C apacitors designed for AC line filters for PH EV/EV. 2. M eet AEC -Q 200 3. H eat cycle: 1000cycle (-55/+125 deg.) 4. C lass X1/Y2 capacitors certified by U L/EN EC (VD E). 5. R ated Voltage: AC 300V 6. C oated w ith flam e-retardant epoxy resin (conform ing to U L94V-0 standard). 7. Available product for R oH S R estriction (EU D irective 2002/95/EC ). 8. Taping available for autom atic insertion. n Applications 1. Ideal for use as Y capacitors for AC line filters and prim ary-secondary coupling on battery chargers for PH EV/EV. 2. Ideal for use as a filter capacitor for D C -D C converters for PH EV/EV and H EV. ød F–1.0 (in m m ) D m ax. 25.0 m in. e T m ax. 3.0 m ax. Lead Code Coating Extension e A3 U p to the end of crim p ø d 0.6–0.05 [Bulk] Vertical Crimp Long (A3) ød F–0.8 D m ax. e T m ax. 3.0 m ax. 5.0–1.0 (in m m ) Lead Code Coating Extension e B3 U p to the end of crim p ø d 0.6–0.05 [Bulk] Vertical Crimp Short (B3) n Standard Certification Standard No. Rated VoltageCertified No. UL ENEC (VDE) E37921 40031217 AC300V(r.m.s.)UL 60384-14 EN 60384-14 n Marking t M anufactured D ate C ode C lass C ode X1Y2 R ated Voltage M ark 300~ e C apacitance Tolerance w N om inal C apacitance (M arked w ith 3 figures) q Type D esignation KJ r C om pany N am e C ode : M ade in Thailand 472M K J300~ X1 Y2 151D q w e rt Example Item Part Number AC Rated Voltage (Vac) Temp. Char. Capacitance (pF) Body Dia. D (mm) Lead Spacing F (mm) Body Thickness T (mm) Lead Package Long Bulk Lead Package Short Bulk Lead Package Taping (1) D E6B 3K J101K ppp 300 B 100 –10% 8 max. 7.5 7.0 max. A3B B3B N3A D E6B 3K J151K ppp 300 B 150 –10% 8 max. 7.5 7.0 max. A3B B3B N3A D E6B 3K J221K ppp 300 B 220 –10% 8 max. 7.5 7.0 max. A3B B3B N3A D E6B 3K J331K ppp 300 B 330 –10% 8 max. 7.5 7.0 max. A3B B3B N3A D E6B 3K J471K ppp 300 B 470 –10% 8 max. 7.5 7.0 max. A3B B3B N3A D E6B 3K J681K ppp 300 B 680 –10% 9 max. 7.5 7.0 max. A3B B3B N3A D E6E3K J102M ppp 300 E 1000 –20% 7 max. 7.5 7.0 max. A3B B3B N3A D E6E3K J152M ppp 300 E 1500 –20% 8 max. 7.5 7.0 max. A3B B3B N3A D E6E3K J222M ppp 300 E 2200 –20% 9 max. 7.5 7.0 max. A3B B3B N3A D E6E3K J332M ppp 300 E 3300 –20% 10 max. 7.5 7.0 max. A3B B3B N3A D E6E3K J472M ppp 300 E 4700 –20% 12 max. 7.5 7.0 max. A3B B3B N3A Three blank colum ns are filled w ith the lead and packaging codes. Please refer to the 3 colum ns on the right for the appropriate code. M urata part num bers m ight be changed depending on lead code or any other changes. Therefore, please specify only the type nam e (KJ) and capacitance of products in the parts list w hen it is required for applying safety standard of electric equipm ent.

C 85E.pdf Jul.13,2011 Safety Standard C ertified Type K J for A utom otive Specifications and Test M ethods As show n in the figure, the lead w ires should be im m ersed in solder of 260–5°C up to 1.5 to 2.0m m from the root of term inal for 10–1 sec. Pre-treatm ent: C apacitor should be stored at 125–3°C for 1 hr., then placed at room condition* for 24–2 hrs. before initial m easurem ents. Post-treatm ent: C apacitor should be stored for 1 to 2 hrs. at room condition.* Resistance to Soldering Heat Appearance N o m arked defect I.R. 1000M Ω m in. Capacitance Change W ithin –10% Dielectric Strength Per Item 6 /, /, /, /, /, /, /, /, /, /, /, /, /, /, Therm al Screen C apacitor 1.5 to 2.0m m M olten Solder Continued on the following page. Char. Specifications D .F.V2.5%B, E Char. Capacitance Change W ithin –10% W ithin +20 –55% B E Type Test Voltage AC 2600V(r.m .s.)KJ Step Temperature (ºC) 20–2 -25–2 20–2 85–2 20–2 Type Test Voltage AC 2600V(r.m .s.)KJ * "R oom condition" Tem perature: 15 to 35°C , R elative hum idity: 45 to 75% , Atm ospheric pressure: 86 to 106kPa Should be placed into steam aging for 8 hrs.–15 m in. After the steam aging, the lead w ire of a capacitor should be dipped into an ethanol solution of 25% rosin and then into m olten solder for 5+0/-0.5 sec. The depth of im m ersion is up to about 1.5 to 2.0m m from the root of lead w ires. Tem p. of solder: Lead Free Solder (Sn-3Ag-0.5C u) 245–5°C H 63 Eutectic Solder 235–5°C

8 Solderability

Lead w ire should be soldered w ith uniform coating on the axial direction over 3/4 of the circum ferential direction. The capacitance m easurem ent should be m ade at each step specified in Table 3. Pre-treatm ent: C apacitor should be stored at 125–3°C for 1 hr., then placed at room condition* for 24–2 hrs. before initial m easurem ents. <Table 3> (Tem p. range: -25 to +85°C ) The capacitor should not be dam aged w hen the test voltages from Table 1 are applied betw een the lead w ires for 60 sec. <Table 1> First, the term inals of the capacitor should be connected together. Then, as show n in the figure at right, a m etal foil should be closely w rapped around the body of the capacitor to the distance of about 3 to 4m m from each term inal. Then, the capacitor should be inserted into a container filled w ith m etal balls of about 1m m diam eter. Finally, AC voltage from Table 2 is applied for 60 sec. betw een the capacitor lead w ires and m etal balls. <Table 2> The insulation resistance should be m easured w ith D C 500–50V w ithin 60–5 sec. of charging. The voltage should be applied to the capacitor through a resistor of 1M Ω . 5 Insulation Resistance (I.R.) 10000M Ω m in. 4 Dissipation Factor (D.F.) The dissipation factor should be m easured at 20˚C w ith The capacitor should be visually inspected.2 Marking To be easily legible The capacitor should be visually inspected for evidence of defect. D im ensions should be m easured w ith slide calipers. specified range. No. Test MethodSpecificationsItem Operating Temperature Range: -40 to +125°C M etal Foil about 3 to 4m m M etal Balls Type K J Specifications and Test M ethods !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

C 85E.pdf Jul.13,2011 Safety Standard C ertified Type K J for A utom otive Specifications and Test M ethods Applied Voltage AC 510V(r.m .s.), except that once each hour the voltage Im pulse Voltage Each individual capacitor should be subjected to a 5kV im pulses for three tim es. Then the capacitors are applied to life test. Front tim e (T1) =1.2µs=1.67T Tim e to half-value (T2) =50µs Apply a voltage from Table 4 for 1000 hrs. at 125+2/-0°C , and relative hum idity of 50% m ax. <Table 4> Pre-treatm ent: C apacitor should be stored at 125–3°C for 1hr., then placed at room condition* for 24–2 hrs. before initial m easurem ents. Post-treatm ent: C apacitor should be stored for 1 to 2 hrs. at room condition.* Life Appearance N o m arked defect I.R. 3000M Ω m in. Capacitance Change W ithin –20% Dielectric Strength Per Item 6 T 100 (% ) t Apply the rated voltage for 1000–12 hrs. at 85–3°C in 80 to 85% relative hum idity. Pre-treatm ent: C apacitor should be stored at 125–3°C for 1hr., then placed at room condition* for 24–2 hrs. before initial m easurem ents. Post-treatm ent: C apacitor should be stored for 1 to 2 hrs. at room condition.* Appearance N o m arked defect D.F. Capacitance Change I.R. 3000M Ω m in. Char. Capacitance Change W ithin –10% W ithin –15% B E Char. Specifications D .F.V5.0%B, E Set the capacitor for 1000–12 hrs. at 85–3°C in 80 to 85% relative hum idity. Pre-treatm ent: C apacitor should be stored at 125–3°C for 1hr., then placed at room condition* for 24–2 hrs. before initial m easurem ents. Post-treatm ent: C apacitor should be stored for 1 to 2 hrs. at room condition.* Humidity (Under Steady State) Appearance N o m arked defect I.R. 3000M Ω m in. D.F. Capacitance Change Dielectric Strength Per Item 6 Char. Capacitance Change W ithin –10% W ithin –15% B E Char. Specifications D .F.V5.0%B, E Solder the capacitor and gum up the body to the test jig (glass epoxy board) by resin (adhesive). Three shocks in each direction should be applied along 3 m utually perpendicular axes to and from of the test specim en (18 shocks). The specified test pulse should be half-sine and should have a duration: 0.5m s, peak value: 100g and velocity change: 4.7m /s.

11 Mechanical

Appearance N o m arked defect D.F. Capacitance W ithin the specified tolerance I.R. 10000M Ω m in. Appearance N o m arked defect Solder the capacitor and gum up the body to the test jig (glass epoxy board) by resin (adhesive). The capacitor should be firm ly soldered to the supporting lead w ire, 1.5m m in total am plitude, w ith about a 20 m inutes rate of vibration change from 10H z to 2000H z and back to 10H z. This m otion should be applied 12 tim es in each of 3 m utually perpendicular directions (total of 36 tim es). The acceleration is 5g m ax. Continued from the preceding page. Continued on the following page. Capacitance W ithin the specified tolerance D.F. Char. Specifications D .F.V2.5%B, E Char. Specifications D .F.V5.0%B, E * "R oom condition" Tem perature: 15 to 35°C , R elative hum idity: 45 to 75% , Atm ospheric pressure: 86 to 106kPa No. Test MethodSpecificationsItem R esin (Adhesive) R esin (Adhesive) Type K J Specifications and Test M ethods !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

C 85E.pdf Jul.13,2011 Safety Standard C ertified Type K J for A utom otive Specifications and Test M ethods The capacitor under test should be held in the flam e in the position that best prom otes burning. Each specim en should only be exposed once to the flam e. Tim e of exposure to flam e: 30 sec. Length of flam e : 12–1m m G as burner : Length 35m m m in. Inside D ia. 0.5–0.1m m O utside D ia. 0.9m m m ax. G as : Butane gas Purity 95% m in.18 Passive Flammability The burning tim e should not exceed 30 sec. The tissue paper should not ignite. About 8m m 200T5m m Test Specim en Tissue About 10m m Thick Board 45° Continued from the preceding page. Cycle Time (sec.) 30 m ax. 60 m ax. 1 to 4 Continued on the following page. * "R oom condition" Tem perature: 15 to 35°C , R elative hum idity: 45 to 75% , Atm ospheric pressure: 86 to 106kPa The capacitor should be individually w rapped in at least one, but not m ore than tw o, com plete layers of cheesecloth. The capacitor should be subjected to 20 discharges. The interval betw een successive discharges should be 5 sec. The U AC should be m aintained for 2 m in. after the last discharge. C 1,2 : 1µF–10% C 3 : 0.033µF–5% 10kV L1 to 4 : 1.5m H –20% 16A R od core choke C t : 3µF–5% 10kV R : 100Ω –2% C x : C apacitor under test U AC : U R –5% F : Fuse, R ated 10A U R : R ated Voltage U t : Voltage applied to C t 17 Active Flammability The cheesecloth should not catch on fire. As show n in the figure at right, fix the body of the capacitor and apply a tensile w eight gradually to each lead w ire in the radial direction of the capacitor up to 10N and keep it for 10–1 sec.16 Robustness of Terminations Tensile Lead w ire should not be cut off. C apacitor should not be broken. Bending Each lead w ire should be subjected to 5N of w eight and bent 90° at the point of egress, in one direction, then returend to its original position and bent 90° in the opposite direction at the rate of one bend in 2 to 3 sec. The capacitor should be subjected to applied flam e for 15 sec. and then rem oved for 15 sec. until 5 cycles are com pleted. The capacitor flam e extinguishes as follow s. No. Test MethodSpecificationsItem U x 5kV tim e W C apacitor Flam e76 20° 38 127 G as Burner: Inside D ia. 9.5 (in m m ) U tC tC xC 3C 2 L2 R C 1 S2Tr U AC F O scilloscope Type K J Specifications and Test M ethods !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

C 85E.pdf Jul.13,2011 Safety Standard C ertified Type K J for A utom otive Specifications and Test M ethods Apply the rated voltage and D C 1.3+0.2/-0V (add 6.8kΩ resistor) at 85–3°C and 80 to 85% hum idity for 1000–12 hrs. Pre-treatm ent: C apacitor should be stored at 125–3°C for 1hr., then placed at room condition* for 24–2 hrs. Post-treatm ent: C apacitor should be stored for 24–2 hrs. at room condition.*

23 Biased

Appearance N o m arked defect D.F. Capacitance Change I.R. 3000M Ω m in. Char. Specifications D .F.V5.0%B, E Per M IL-STD -202 M ethod 215 Solvent 1: 1 part (by volum e) of isopropyl alcohol 3 parts (by volum e) of m ineral spirits Solvent 2: Terpene defluxer Solvent 3: 42 parts (by volum e) of w ater 1 part (by volum e) of propylene glycol m onom ethyl ether 1 part (by volum e) of m onoethanolom ine

22 Resistance to

Appearance N o m arked defect D.F. Capacitance Change I.R. 3000M Ω m in. Char. Capacitance Change W ithin –10% W ithin –20% B E Char. Specifications D .F.V5.0%B, E Char. Capacitance Change W ithin –10% W ithin –15% B E Char. Capacitance Change W ithin –10% W ithin –20% B E Char. Specifications D .F.V5.0%B, E Step Temperature (ºC) -55+0/-3 125+3/-0 Time (min) The capacitor should be subjected to 300 cycles. Pre-treatm ent: C apacitor should be stored at 125–3˚C for 1 hr., then placed at room condition* for 24–2 hrs. Post-treatm ent: C apacitor should be stored for 24–2 hrs. at room condition.*

21 Thermal

Appearance N o m arked defect except color change of outer coating. D.F. Capacitance Change I.R. 3000M Ω m in. Set the capacitor for 1000–12 hrs. at 150–3°C . Pre-treatm ent: C apacitor should be stored at 125–3˚C for 1 hr., then placed at room condition* for 24–2 hrs. Post-treatm ent: C apacitor should be stored for 24–2 hrs. at room condition.* High Temperature Exposure (Storage) Capacitance Change W ithin –20% Continued from the preceding page. Char. Capacitance Change W ithin –10% W ithin –20% B E Char. Specifications D .F.V5.0%B, E Step Temperature (ºC) -55+0/-3 R oom tem p. 125+3/-0 R oom tem p. Time (min) * "R oom condition" Tem perature: 15 to 35°C , R elative hum idity: 45 to 75% , Atm ospheric pressure: 86 to 106kPa The capacitor should be subjected to 1000 tem perature cycles. C ycle tim e: 1000 cycles Pre-treatm ent: C apacitor should be stored at 125–3˚C for 1 hr., then placed at room condition* for 24–2 hrs. Post-treatm ent: C apacitor should be stored for 24–2 hrs. at room condition.*

19 Temperature

Appearance N o m arked defect I.R. 3000M Ω m in. D.F. Capacitance Change Dielectric Strength Per Item 6 No. Test MethodSpecificationsItem Char. Specifications I.R. 1000M Ω m in. Continued on the following page. Type K J Specifications and Test M ethods !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

C 85E.pdf Jul.13,2011 Safety Standard C ertified Type K J for A utom otive Specifications and Test M ethods Char. Capacitance Change W ithin –10% W ithin –20% B E Char. Specifications D .F.V5.0%B, E Apply 24 hrs. of heat (25 to 65°C ) and hum idity (80 to 98% ) treatm ent show n below , 10 consecutive tim es. Pre-treatm ent: C apacitor should be stored at 125–3˚C for 1 hr., then placed at room condition* for 24–2 hrs. Post-treatm ent: C apacitor should be stored for 24–2 hrs. at room condition.*

24 Moisture

Appearance N o m arked defect D.F. Capacitance Change I.R. 3000M Ω m in. -10 H um idity 90-98% H um idity 80-98% H um idity 90-98% H um idity 80-98% H um idity 90-98% +10 -2°C Initial m easurem ent Tem perature O ne cycle 24 hours 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 H ours Continued from the preceding page. * "R oom condition" Tem perature: 15 to 35°C , R elative hum idity: 45 to 75% , Atm ospheric pressure: 86 to 106kPa No. Test MethodSpecificationsItem Type K J Specifications and Test M ethods !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

C 85E.pdf Jul.13,2011 !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. n Capacitance - Temperature Characteristics B B E Tem perature (°C ) -40 -20 -40 -60 -80 -100 -20 0 20 40 60 80 100 120 140 C ap. C hange (% ) E n Insertion Loss - Frequency Characteristics 1 10 100 1000 Frequency (M H z) Insertion Loss (dB) Type KJ Signal pow er: 1m W AC 240V(r.m .s.) / 60H z is applied on the capacitor. (1) 100pF (2) 220pF (3) 470pF (4) 1000pF (5) 2200pF (6) 4700pF (6) (5) (4) (3) (1) (2) n Leakage Current Characteristics 0 1000 2000 3000 4000 1.0 0.8 0.6 0.4 0.2 0.0 0 1000 2000 3000 4000 AC voltage : 60H z Tem perature : 25°C AC voltage : 60H z Tem perature : 25°C Type KJ (B char.) Type KJ (E char.) Leakage current [m A(r.m .s.)] Leakage current [m A(r.m .s.)] 4.0 3.0 2.0 1.0 0.0 470pF 4700pF 2200pF 1000pF 220pF 100pF Safety C ertified C eram ic C apacitors for A utom otive C haracteristics D ata (Typical Exam ple)

C 85E.pdf Jul.13,2011 Item Pitch of component Pitch of sprocket hole Lead spacing Length from hole center to component center Length from hole center to lead Body diameter Deviation along tape, left or right Carrier tape width Position of sprocket hole Lead distance between reference and bottom planes Protrusion length Diameter of sprocket hole Lead diameter Total tape thickness Total thickness, tape and lead wire Body thickness Portion to cut in case of defect Hold down tape width Hold down tape position Coating extension on lead Deviation across tape, front Deviation across tape, rear P F D W W 1 H 0 r øD 0 ød T L W 0 W 2 e ∆h1 ∆h2 15.0–2.0 15.0–0.3 7.5–1.0 7.5–1.5 3.75–1.0 0–2.0 See the individual product specifications. 18.0–0.5 9.0–0.5 2.0 m ax. (in m m ) N3Code 18.0 +2.0 +0.5 to -1.0 4.0–0.1 0.6–0.3 1.5 m ax. 7.0 m ax. 11.0 11.5 m in. 1.5–1.5 –1.0 15m m pitch / lead spacing 7.5m m taping Vertical crim p type (Lead C ode: N 3) 0.6–0.05 L P D ∆S F ød øD 0R W 0 W 2 W 1 W e H 0 t2 t1 U p to the end of crim p 3.0 m ax. H 0 n Taping Specifications T m ax. ∆h1 ∆h2O M arked side TapingBulk Polyethylene Bag Am m o Pack n Packaging Styles n Minimum Quantity (Order in Sets Only) 7 to 10 Body Dia. D (mm) 250 200 Lead Code 500 250 Lead Code Long Short [Bulk] (pcs./Bag) [Taping] Lead Code: N3 700pcs./Am m o Pack Safety C ertified C eram ic C apacitors for A utom otive Packaging !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

C 85E.pdf Jul.13,2011 W hen D C -rated capacitors are to be used in AC or ripple current circuits, be sure to m aintain the Vp-p value of the applied voltage or the Vo-p that contains D C bias w ithin the rated voltage range. W hen the voltage is applied to the circuit, starting or stopping m ay generate irregular voltage for a transit period because of resonance or sw itching. Be sure to use a capacitor w ith a rated voltage range that includes these irregular voltages. Voltage Positional Measurement DC Voltage DC+AC Voltage AC Voltage Pulse Voltage (1) Pulse Voltage (2) V0-p V0-p Vp-p Vp-p Vp-p 1. Operating Voltage Keep the surface tem perature of a capacitor below the upper lim it of its rated operating tem perature range. Be sure to take into account the heat generated by the capacitor itself. W hen the capacitor is used in a high- frequency current, pulse current or sim ilar current, it m ay have self-generated heat due to dielectric loss. Applied voltage load should be such that self-generated heat is w ithin 20°C under the condition w here the capacitor is subjected to an atm ospheric tem perature of 25°C . W hen m easuring, use a therm ocouple of sm all therm al capacity-K of ø0.1m m under conditions w here the capacitor is not affected by radiant heat from other com ponents or w ind from surroundings. Excessive heat m ay lead to deterioration of the capacitor's characteristics and reliability. (N ever attem pt to perform m easurem ent w ith the cooling fan running. O therw ise, accurate m easurem ent cannot be ensured.) 2. Operating Temperature and Self-generated Heat Test equipm ent for AC w ithstanding voltage should be used w ith the perform ance of the w ave sim ilar to 50/60H z sine w ave. If the distorted sine w ave or overload exceeding the specified voltage value is applied, a defect m ay be caused. 3. Test Condition for Withstanding Voltage (1) Test Equipm ent Continued on the following page. n !Caution (Rating) Safety C ertified C eram ic C apacitors for A utom otive !C aution !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

C 85E.pdf Jul.13,2011 Continued from the preceding page. W hen the w ithstanding voltage is applied, the capacitor's lead or term inal should be firm ly connected to the output of the w ithstanding voltage test equipm ent, and then the voltage should be raised from near zero to the test voltage. If the test voltage w ithout the raise from near zero voltage w ould be applied directly to capacitor, test voltage should be applied w ith the zero cross.* At the end of the test tim e, the test voltage should be reduced to near zero, and then capacitor's lead or term inal should be taken off the output of the w ithstanding voltage test equipm ent. If the test voltage w ithout the raise from near zero voltage w ould be applied directly to capacitor, the surge voltage m ay rise, and therefore, a defect m ay be caused. *ZER O C R O SS is the point w here voltage sine w ave passes 0V. See the figure at right. (2) Voltage Applied M ethod zero cross Voltage sine w ave W hen the capacitor is broken, failure m ay result in a short circuit. Be sure to provide an appropriate fail-safe function like a fuse on your product if failure could result in an electric shock, fire or fum ing. FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY RESULT, WORST CASE, IN A SHORT CIRCUIT AND CAUSE FUMING OR PARTIAL DISPERSION WHEN THE PRODUCT IS USED. 4. Fail-Safe Safety C ertified C eram ic C apacitors for A utom otive !C aution !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

C 85E.pdf Jul.13,2011 Safety C ertified C eram ic C apacitors for A utom otive !C aution !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. n !Caution (Storage and Operating Condition) n !Caution (Soldering and Mounting) n !Caution (Handling) Vibration and Im pact D o not expose a capacitor or its lead w ires to excessive shock or vibration during use. Excessive shock or vibration m ay cause fatigue destruction of lead w ires m ounted on the circuit board. Please take m easures to hold a capacitor on the circuit boards by adhesive, m olding resin or another coating. Please confirm there is no influence of holding m easures on the product w ith the intended equipm ent. FAILU R E TO FO LLO W TH E ABO VE C AU TIO N S M AY R ESU LT, W O R ST C ASE, IN A SH O R T C IR C U IT AN D C AU SE FU M IN G O R PAR TIAL D ISPER SIO N W H EN TH E PR O D U C T IS U SED . 1. Vibration and Im pact D o not expose a capacitor or its lead w ires to excessive shock or vibration during use. Excessive shock or vibration m ay cause fatigue destruction of lead w ires m ounted on the circuit board. Please take m easures to hold a capacitor on the circuit boards by adhesive, m olding resin or another coating. Please confirm there is no influence of holding m easures on the product w ith the intended equipm ent. 2. Soldering W hen soldering this product to a PC B/PW B, do not exceed the solder heat resistance specifications of the capacitor. Subjecting this product to excessive heating could m elt the internal junction solder and m ay result in therm al shocks that can crack the ceram ic elem ent. Soldering the capacitor w ith a soldering iron should be perform ed in the follow ing conditions. Tem perature of iron-tip: 400 degrees C . m ax. Soldering iron w attage: 50W m ax. Soldering tim e: 3.5 sec. m ax. 3. Bonding, R esin M olding and C oating For bonding, m olding or coating this product, verify that these processes do not affect the quality of the capacitor by testing the perform ance of the bonded, m olded or coated product in the intended equipm ent. W hen the am ount of applications, dryness/hardening conditions of adhesives and m olding resins containing organic solvents (ethyl acetate, m ethyl ethyl ketone, toluene, etc). are unsuitable, the outer coating resin of a capacitor is dam aged by the organic solvents and it m ay result, w orst case, in a short circuit. The variation in thickness of adhesive, m olding resin or coating m ay cause outer coating resin cracking and/or ceram ic elem ent cracking of a capacitor in a tem perature cycling. 4. Treatm ent after Bonding, R esin M olding and C oating W hen the outer coating is hot (over 100 degrees C .) after soldering, it becom es soft and fragile. Therefore, please be careful not to give it m echanical stress. FAILU R E TO FO LLO W TH E ABO VE C AU TIO N S M AY R ESU LT, W O R ST C ASE, IN A SH O R T C IR C U IT AN D C AU SE FU M IN G O R PAR TIAL D ISPER SIO N W H EN TH E PR O D U C T IS U SED . O perating and Storage Environm ent The insulating coating of capacitors does not form a perfect seal; therefore, do not use or store capacitors in a corrosive atm osphere, especially w here chloride gas, sulfide gas, acid, alkali, salt or the like are present. Also, avoid exposure to m oisture. Before cleaning, bonding, or m olding this product, verify that these processes do not affect product quality by testing the perform ance of a cleaned, bonded or m olded product in the intended equipm ent. Store the capacitors w here the tem perature and relative hum idity do not exceed -10 to 40 degrees centigrade and 15 to 85% . U se capacitors w ithin 6 m onths after delivery. C heck the solderability after 6 m onths or m ore. FAILU R E TO FO LLO W TH E ABO VE C AU TIO N S M AY R ESU LT, W O R ST C ASE, IN A SH O R T C IR C U IT AN D C AU SE FU M IN G O R PAR TIAL D ISPER SIO N W H EN TH E PR O D U C T IS U SED .

C 85E.pdf Jul.13,2011 Safety C ertified C eram ic C apacitors for A utom otive N otice !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. n Notice (Soldering and Mounting) C leaning (ultrasonic cleaning) To perform ultrasonic cleaning, observe the follow ing conditions. R inse bath capacity: O utput of 20 w atts per liter or less. R insing tim e: 5 m in. m axim um . D o not vibrate the PC B/PW B directly. Excessive ultrasonic cleaning m ay lead to fatigue destruction of the lead w ires. n Notice (Rating) 1. C apacitance C hange of C apacitors C apacitors have an aging characteristic, w hereby the capacitor continually decreases its capacitance slightly if the capacitor is left on for a long tim e. M oreover, capacitance m ight change greatly depending on the surrounding tem perature or an applied voltage. Therefore, it is not likely to be suitable for use in a constant tim e circuit. Please contact us if you need detailed inform ation. 2. Perform ance C heck by Equipm ent Before using a capacitor, check that there is no problem in the equipm ent's perform ance and the specifications. G enerally speaking, C LASS 2 ceram ic capacitors have voltage dependence characteristics and tem perature dependence characteristics in capacitance. Therefore, the capacitance value m ay change depending on the operating condition in the equipm ent. Therefore, be sure to confirm the apparatus perform ance of receiving influence in the capacitance value change of a capacitor, such as leakage current and noise suppression characteristic. M oreover, check the surge-proof ability of a capacitor in the equipm ent, if needed, because the surge voltage m ay exceed specific value by the inductance of the circuit.

C 85E.pdf Jul.13,2011 !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Plant Applied Standard ISO 9001Izum o M urata M anufacturing C o., Ltd. Taiw an M urata Electronics C o., Ltd. ISO 9001M urata Electronics (Thailand), Ltd. ISO 9001 M anufacturing plants that produce the products in this catalog have obtained the ISO 9000 quality system certificate. Safety C ertified C eram ic C apacitors/H igh Voltage C eram ic C apacitors ISO 9000 C ertifications

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.C85E.pdf Jul.13,2011