DDR4-FUNCTIONAL

DDR4-FUNCTIONAL KEYSIGHT | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 10

Technical content

DDR4 Functional/Protocol Debug and Analysis Reference Solution Solution Brochure When DDR4 memory systems don’t behave as expected, Keysight’s DDR4 functional/protocol debug and analysis solution provides trace capture and analysis, enabling the insight needed to understand system behavior and get to the root cause of system issues.

02 | Keysight | DDR4 Functional/Protocol Debug and Analysis Reference Solution - Solution Brochure Next-Generation DDR4 Test Challenges System and memory designers implementing DDR4 are striving for innovations in performance, density and power efficiency in their systems. Reliable measurements and analysis enable market-changing innovations and rapid fault isolation by providing insight into actual system behavior. Using Keysight’s DDR4 functional/protocol debug and analysis solution to address DDR4 test challenges Keysight’s DDR4 functional/protocol debug and analysis reference solution is the industry’s only functional/protocol validation, debug, analysis and bus level signal integrity insight solution covering address/command and data for DDR4 systems operating at data rates up to and including 4000 Mb/s. Solution feature Benefit Proven capture of DDR4 Read/ Write data at 4000 Mb/s Follow the signal flow on DDR4 memory systems to isolate issues – Memory write back issues, initialization issues, system crashes, and system abnormalities – Visibility to all Address, Command and Data (Address/Command up to 5000 Mb/s data rates) 100 ps by 100 mV minimum eye requirement at probe point Reliable capture on the smallest eye openings. No other logic analyzer can capture eyes this small

2.5 GHz trigger sequencer with

Capture sequential up to 2.5 GHz. Capture up to 32 sequential events using Keysight’s exclusive burst trigger. Competition triggers at 750 MHz, which is inadequate for DDR/LPDDR above 1500 Mb/s Exclusive quad sample mode (Option U4164A-02G) Maximum signal access at highest data rates from one probe point Allows simultaneous capture of Read/Write data at two different thresholds at rates up to 4000 Mb/s from a single probe load Extensive memory analysis software (B4661A) makes your job easier Debug, improve performance, and validate protocol compliance DDR2/3/4 decoder/transaction viewer Functional protocol compliance analysis for DDR4 – Post-process compliance violation analysis – Protocol compliance violation testing across speed changes – Click to jump to worst violation or to mark violations – Margin information on violations – Real-time compliance violation analysis triggers on violations to identify elusive DDR4 system violations – User-defined regression tests for any logic analyzer configuration on any bus Performance overview and analysis – Powerful traffic overview for rapid navigation to areas of interest – Analyzes and displays Activate/Read/Write/Precharge (page open/ page close) – Memory access views include BA: Row vs. time to highlight hot spots for potential row hammer issues – Unique refresh rate view: rolling window of % of refresh – Improve system performance with detailed metrics and graphs Bus level signal insight – Qualitative eye scans (up to hundreds of signals) using DDR eye scan Ease-of-use to minimize set up and analysis time – DDR setup assistant: Simplifies state mode measurement setup to minutes – DDR configuration creator enables users to create custom mid-bus or BGA configurations in minutes using an interactive graphical interface DIMM, SODIMM, universal footprint, and BGA probing Allows you to connect to any DDR4 system under test for functional compliance validation, debug, and bus level signal integrity insight Timing zoom Provides 256k high-resolution (12.5 GHz) timing measurements simultaneous with full memory depth state or timing measurements from single probe point

03 | Keysight | DDR4 Functional/Protocol Debug and Analysis Reference Solution - Solution Brochure AcquireConnect View and analyze DIMM and SODIMM interposers BGA interposers Mid-bus and specialty probing B4661A memory analysis softwareU4164A logic analyzer module Reference Solution Architecture – Connect to your system by selecting probing specific to your device under test. – Aquire trace captures using the U4164A module(s) in an M9502A/05A chassis with a host controller. The number of U4164A modules and options for the modules varies depending on the probing and data rate required. – View and analyze the B4661A memory analysis software. 1. For a more complete set of configuration options and examples, please refer to the DDR4 Functional/ Protocol Debug and Analysis Reference Solution Configuration Guide, literature number 5992-1539EN. Accelerate DDR4 Insight using the U4164A – Capture highest data rates! – Address and command for DDR4 up to

5000 Mb/s and data

– Capture smallest eyes! – 100 mV x 100 ps at probe point – Sequential triggers up to 2.5 GHz or 4000 Mb/s! – 12.5 GHz timing zoom – 256k deep – Up to 400M deep traces B4661A memory analysis software – Listing with decoders – Performance analysis – Functional protocol compliance analysis for DDR4 – Post-process compliance violation analysis – Powerful traffic overview for rapid navigation to areas of interest – Analyzes and displays Activate/Read/Write/ Precharge (page open/ page close) – Memory access views include BA: Row vs. time to highlight hot spots for potential row hammer issues – Unique refresh rate view: Rolling window of % of refresh – Improve system performance with detailed metrics and graphs DDR eye scan – Bus level signal integrity insight – Qualitative insight for hundreds of signals – Scanned relative to each other under the same stimulus

04 | Keysight | DDR4 Functional/Protocol Debug and Analysis Reference Solution - Solution Brochure Instruments U4164A logic analyzer module www.keysight.com/find/u4164a The U4164A logic analyzer system combines reliable data capture with powerful analysis and validation tools to enable you to quickly and confidently validate and debug high-speed digital designs operating at speeds up to 4 Gb/s. The U4164A logic analyzer module delivers unique capabilities that enable you to make measurements and achieve levels of insight not available with other logic analyzers. M9502/05A AXIe 2-5 slot chassis www.keysight.com/find/m9502a The M9502/05A AXIe chassis is fully compatible with the AXIe 1.0 specification. It includes an embedded system module (ESM) that does not take up an instrument slot. This system module performs the chassis management functions contained in the AXIe specification. Additionally, it provides PCI and LAN interfaces for connection to an external computer, external clock and trigger connectors, and Keysight-exclusive, inter-chassis synchronization connectors. The local bus implemented in the M9502/05A provides the maximum 62 pairs allowed by the AXIe specification. Combine the M9502/05A with the M9048A PCIe desktop adaptor to achieve the highest system bandwidth. M9536A AXIe embedded controller www.keysight.com/find/m9536a The Keysight M9536A is the first AXIe embedded controller available on the market. It provides a high-performance PCIe Gen2 link to the AXIe backplane and is a powerful one-slot computer that can be used to build compact AXIe systems. It easily integrates into hybrid test systems using GP-IB, USB, and LAN due to the built-in front panel interfaces. Hardware

05 | Keysight | DDR4 Functional/Protocol Debug and Analysis Reference Solution - Solution Brochure DDR4 DIMM and SODIMM interposers are available through Keysight. Contact your Keysight representative to order the interposer for your system under test. Visit: www.keysight.com/find/contactus . FS2510AB DDR4 DIMM and FS2512 DDR4 SODIMM interposers offer: – Ease of connection – Direct connect to U4164A – Low profile - Minimal loading – Support of UDIMM or RDIMM – Timing and state analysis – Compatible with DDR setup assistant and DDR eye scan W4640 Series BGA probes www.keysight.com/find/w4641a www.keysight.com/find/w4643a The W4640A series DDR4 BGA interposers enable probing of embedded memory DRAM from the ball grid array with Keysight logic analyzers. The W4640A Series DDR4 BGA interposers are designed to take full advantage of quad sample state mode on U4164A modules with U4164A- 02G option, requiring only a single probe point for up to four samples at two different thresholds. U4208/09A probe/cable, 61-pin ZIF, 160-pin direct connect www.keysight.com/find/u4208a The U4208A/09A probe/cables have a 61-pin ZIF probe connector on one end of the cable and two 160-pin connectors that connect into the front panel of a U4164A logic analyzer module on the other end of the cable. The U4208A/09A are designed to connect from the left/right wings of the W4640A Series DDR4 BGA interposer directly into the U4164A logic analyzer. The U4164A logic analyzer will be in normal state mode for the address and command signal capture and in quad sample state mode for the data signal capture. Default configurations for the W4640A Series DDR4 BGA interposers and U4208A/09A probe/cables are included at no charge in the standard download package of the B4661A memory analysis software. For a more complete set of probing options, please refer to the DDR4 Functional/Protocol Debug and Analysis Reference Solution Configuration Guide, literature number 5992-1539EN and the Keysight Technologies Probing Solutions for Logic Analyzers Data Sheet, literature number 5968-4632E. Hardware – Probing

07 | Keysight | DDR4 Functional/Protocol Debug and Analysis Reference Solution - Solution Brochure The Keysight B4661A memory analysis software provides four standard software features and four licensed memory analysis options. Standard software features – Default configurations for DDR and LPDDR probing solutions for Keysight logic analyzers – DDR setup assistant – DDR eye finder/eye scan – DDR configuration creator B4661A licensed software options: Software capability License type Determine the function(s) you need Determine the license type you need Intersection of row/column gives full option number Node (-xFP) Transportable (-xTP) Server/floating (-xNP) DDR decoder with physical address trigger tool (–1xx) B4661A-1FP B4661A-1TP B4661A-1NP LPDDR decoder (–2xx) B4661A-2FP B4661A-2TP B4661A-2NP DDR and LPDDR compliance violation analysis (–3xx) B4661A-3FP B4661A-3TP B4661A-3NP DDR3/4 and LPDDR2/3/4 performance analysis (–4xx) B4661A-4FP B4661A-4TP B4661A-4NP You can order any combination and/or quantity of the B4661A licensed options. Software (Continued)

08 | Keysight | DDR4 Functional/Protocol Debug and Analysis Reference Solution - Solution Brochure Recommended Reference Solution Configuration For: DDR4 DIMM System Under Test 2 Hardware Model Quantity Description U4164A 3 136-channel logic analyzer module U4164A-02G 3 Speed grade option for 2.5 GHz clocking and 4 Gb/s data capture U4164A-008 3 Increase acquisition memory depth to 8 Mb PS-X10-750-3PH 1 Interposer FS2510AB DDR4 288-pin DIMM accessory for logic with FS1070 conversion kit for operation over 2500 Mb/s M9505A 1 5-slot AXIe-based chassis M9536A 1 Embedded controller Software Model Quantity Description Version 6.20 or higher 1 Keysight’s logic and protocol analyzer software (64-bit) B4661A 1 Memory analysis software B4661A-1FP 1 DDR decoder with physical address trigger tool, fixed perpetual license B4661A-3FP 1 DDR and LPDDR compliance violation analysis, fixed perpetual license B4661A-4FP 1 DDR3/4 and LPDDR2/3/4 performance analysis, fixed perpetual license 2. For a more complete set of configuration options, please refer to the DDR4 Functional/Protocol Debug and Analysis Reference Solution Configuration Guide, literature number 5992-1539EN. 1. User-supplied monitor 2. M9505A five-slot chassis (qty 1) 3. U4164A logic analyzer module (qty 3) 4. M9536A embedded controller running logic analyzer and B4661A software (qty 1) 5. FS2510AB DDR4 DIMM interposer with FS1070 conversion for use with three modules (qty 1) 6. Device under test DDR4 DIMM Solution for DDR4 ADD/CMD/Data capture up to 4000 Mb/s

www.axiestandard.org AdvancedTCA® Extensions for Instrumentation and Test (AXIe) is an open standard that extends the AdvancedTCA for general purpose and semiconductor test. Keysight is a founding member of the AXIe consortium. ATCA®, AdvancedTCA®, and the ATCA logo are registered US trademarks of the PCI Industrial Computer Manufacturers Group. www.lxistandard.org LAN eXtensions for Instruments puts the power of Ethernet and the Web inside your test systems. Keysight is a founding member of the LXI consortium. www.pxisa.org PCI eXtensions for Instrumentation (PXI) modular instrumentation delivers a rugged, PC-based high-performance measurement and automation system. 09 | Keysight | DDR4 Functional/Protocol Debug and Analysis Reference Solution - Solution Brochure Keysight software is downloadable expertise. From first simulation through first customer shipment, we deliver the tools your team needs to accelerate from data to information to actionable insight. – Electronic design automation (EDA) software – Application software – Programming environments – Utility software Learn more at www.keysight.com/find/software Start with a 30-day free trial. www.keysight.com/find/free_trials Download your next insight

www.keysight.com/find/mykeysight A personalized view into the information most relevant to you. Three-Year Warranty www.keysight.com/find/ThreeYearWarranty Keysight’s committed to superior product quality and lower total cost of ownership. Keysight is the only test and measurement company with three-year warranty standard on all instruments, worldwide. And, we provide a one-year warranty on many accessories, calibration devices, systems and custom products. Keysight Assurance Plans www.keysight.com/find/AssurancePlans Up to ten years of protection and no budgetary surprises to ensure your instruments are operating to specification, so you can rely on accurate measurements. Keysight Infoline www.keysight.com/find/service Keysight’s insight to best in class information management. Free access to your Keysight equipment company reports and e-library. Keysight Channel Partners www.keysight.com/find/channelpartners Get the best of both worlds: Keysight’s measurement expertise and product breadth, combined with channel partner convenience. www.keysight.com/find/solution-ddrfunctionalprotocoldebugandanalysis From Hewlett-Packard through Agilent to Keysight For more than 75 years, we‘ve been helping you unlock measurement insights. Our unique combination of hardware, software and people can help you reach your next breakthrough. Unlocking measurement insights since 1939.

1939 THE FUTURE

For more information on Keysight Technologies’ products, applications or services, please contact your local Keysight office. The complete list is available at: www.keysight.com/find/contactus Americas Canada (877) 894 4414 Brazil 55 11 3351 7010 Mexico 001 800 254 2440 United States (800) 829 4444 Asia Pacific Australia 1 800 629 485 China 800 810 0189 Hong Kong 800 938 693 India 1 800 11 2626 Japan 0120 (421) 345 Korea 080 769 0800 Malaysia 1 800 888 848 Singapore 1 800 375 8100 Taiwan 0800 047 866 Other AP Countries (65) 6375 8100 Europe & Middle East Austria 0800 001122 Belgium 0800 58580 Finland 0800 523252 France 0805 980333 Germany 0800 6270999 Ireland 1800 832700 Israel 1 809 343051 Italy 800 599100 Luxembourg +32 800 58580 Netherlands 0800 0233200 Russia 8800 5009286 Spain 800 000154 Sweden 0200 882255 Switzerland 0800 805353 Opt. 1 (DE) Opt. 2 (FR) Opt. 3 (IT) United Kingdom 0800 0260637 For other unlisted countries: www.keysight.com/find/contactus (BP-02-10-16) DEKRA Certified ISO9001 Quality Management System www.keysight.com/go/quality Keysight Technologies, Inc. DEKRA Certified ISO 9001:2015 Quality Management System 10 | Keysight | DDR4 Functional/Protocol Debug and Analysis Reference Solution - Solution Brochure This information is subject to change without notice. © Keysight Technologies, 2016 Published in USA, May 12, 2016 5992-1494EN www.keysight.com