DDR12 EMERSON-NETWORKPOWER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

DC-DC CONVERTERS Tracking Dual Output 1

2 YEAR WARRANTY

All specifications are typical at nominal input, full load at 25 °C unless otherwise stated SPECIFICATIONS

  • High current dual-output power module for DDR memory
  • Single compact module provides 25 A @ 2.5 V for V ddq supply and 8 A @ 1.25 V for V tt termination
  • Tracking dual output voltages (1.25 V @ 8 A, 2.5 V @ 25 A)
  • Output voltage remote sense (only on V ddq)
  • Sink capability for logic terminations
  • Power good output signal
  • Overvoltage protection
  • Overcurrent protection
  • Remote ON/OFF
  • Available RoHS compliant The dual output DDR12-25D08-AJ is specially designed to meet the power needs of double data rate memory DIMMS and associated memory control logic. The V tt output tracks the Vddq output, while the Vtt output can sink current as required by logic terminations. This converter offers typical efficiencies greater than 84% when operated at 50% load or greater. This model features a wide input range as well as trimmable output voltages. Remote sense on V ddq and remote ON/OFF facilities are included as standard, and the converter is protected against over-current and over- voltage conditions. File Name: ddr12.pdf Rev: 04 Sept 2006 OUTPUT SPECIFICATIONS - Vddq Voltage adjustability 2.32-2.75 Vdc Output setpoint accuracy Using 1% trim resistors ±2.5% Line regulation Low line to high line ±0.1% Load regulation Minimum load to full load +0%/-1.0% Cross regulation ±0.4% Temperature Co-efficient 0.2 mV/ºC Ripple and noise 5 Hz to 20 MHz 50 mV pk-pk (See Note 1) Transient response 4 A/100 µs ±3.0% deviation (See Note 2) Overshoot Nominal output at turn-on 2.0% max. Undershoot 150 mV max. OUTPUT SPECIFICATIONS - Vtt Tracking Accuracy Measured at Converter Pins 12 mV (=Vddq/2 - Vtt) Ripple and noise 5 Hz to 20 MHz 30 mV pk-pk (See Note 1) Transient response 8 A/1 µs ±3.0% deviation (See Note 2) INPUT SPECIFICATIONS Input voltage range Nominal 12 V 10.8-13.2 Vdc Input current Minimum load 400 mA Remote OFF 20 mA Input current (max.) (See Note 3) 9 A max. @ Io max. and Vin = 10.8 Vdc INPUT SPECIFICATIONS - Contd. Input reflected ripple (See Note 4) 100 mA (pk-pk) Remote ON/OFF Logic compatibility Open collector ref to -input ON >2.0 Vdc OFF <0.8 Vdc Start-up time Power up <20 ms (See Note 5) Remote ON/OFF <20 ms EMC CHARACTERISTICS Electrostatic discharge EN61000-4-2, IEC801-2 Conducted immunity EN61000-4-2 GENERAL SPECIFICATIONS Efficiency V ddq = 2.5 V 84% @ full load Vtt = 1.25 V Switching frequency V ddq 300 kHz typ. (Fixed) V tt 300 kHz typ. Approvals and (See Note 7) IEC60950/EN60950 standards UL/cUL 1950/60950 Material flammability UL94V-0 Weight 34 g (1.3 oz) MTBF Telcordia SR-332 TBD hours ENVIRONMENTAL SPECIFICATIONS Thermal performance Operating ambient, 0 °C to +80 °C temperature Non-operating -40 °C to +125 °C

For the most current data and application support visit www.artesyn.com/powergroup/products.htm DDR12 Series Dual output DC-DC CONVERTERS Tracking Dual Output 2 NEW Product NNootteess 1 Measured as per recommended set-up. Cin = 270 µF (20 m Ω ESR max, Cout = 3 x 560 µF (5 m Ω ESR max).

2 Vin = 12 Vdc, Tc = 25 ° C, bounded by min/max load specification with

recommended system caps. 3 External input fusing is recommended. 4 Measured with external filter. 5 Start-up into resistive load. 6 Meets levels A and B conducted emissions with external components.

7 This product is only for inclusion by pr ofessional installers within other

equipment and must not be operated as a stand alone pr oduct.

8 Large value ceramic capacitor located close to the input pins is

recommended (TDK p/N C4532X7R1E106M).

9 Use of additional high quality ceramic output capacitors is r ecommended

in the end system.

10 TSE RoHS 5/6 (non Pb-free) compliant versions may be available on

special request, please contact your local sales representative for details. 11 NOTICE: Some models do not support all options. Please contact your local Artesyn representative or use the on-line model number sear ch tool at http://www.artesyn.com/powergroup/products.htm to find a suitable alternative. CAUTION: Hazardous internal voltages and high temperatures. Ensure that unit is not user accessible. File Name: ddr12.pdf Rev: 04 Sept 2006 OUTPUT INPUT OVP OUTPUT OUTPUT OUTPUT EFFICIENCY LOAD MODELPOWER VOLTAGE VOLTAGE CURRENT CURRENT (TYP.) REGULATION NUMBER (10,11) (MAX.) (MIN.) (MAX) 69 W 10.8-13.2 Vdc 3.6 Vdc 2.32-2.75 Vdc 1.5 A 25 A 84% ±1.0% DDR12-25D08-AJ 11 W 1.8 Vdc 1.16-1.375 Vdc 0 A 8 A See Tracking Spec. International Safety Standard Approvals UL/cUL CAN/CSA 22.2 UL 60950 File No. E139421 TÜV Pr oduct Service (EN60950) Certificate No. B 02 12 19870 206 CB report and certificate to IEC60950 PIN CONNECTIONS PIN NO. FUNCTION PIN NO. FUNCTION J1-1 Power Good J2-5 Ground J1-2 Output Enable J2-6 Ground J1-3 Ground J2-7 Ground J1-4 Ground J2-8 Ground J1-5 12 V Input J2-9 V ddq Sense - J1-6 12 V Input J2-10 Vddq Sense + J1-7 12 V Input J2-11 V ddq J2-1 Vtt Ref J2-12 Vddq J2-2 Vtt J2-13 Vddq J2-3 Vtt J2-14 Vddq J2-4 Ground J2-15 V ddq PROTECTION Short-circuit Vddq Latching Vtt Latching Overvoltage V ddq Latching Vtt Latching Overcurrent V ddq Latching Vtt Fold-back RECOMMENDED SYSTEM CAPACITANCE Input capacitance (See Note 8) 10 µF/3 m Ω ESR max. Output capacitance V ddq 1680 µF/5 mΩ ESR max. (See Note 9) V tt 1680 µF/5 mΩ ESR max.

For the most current data and application support visit www.artesyn.com/powergroup/products.htm DDR12 Series Dual output DC-DC CONVERTERS Tracking Dual Output 3 NEW Product 0.500 (12.67) Ref 0.062 (1.57) PCB 3.000 (76.20) 1.200 (30.48) PIN 1 PIN 7 PIN 1 PIN 150.025 (0.64) Typ 0.100 (2.54) Typ 0.150 (3.81) Typ 0.250 (6.35) 1.100 (27.94) 0.050 (1.30) TYP. 0.025 (0.64) TYP. 0.260 (6.71) 0.170 (4.39) Dimensions in Inches (mm) Tolerances (unless otherwise specified) 2 Places ±0.02 (±0.51) 3 Places ±0.010 (±0.25) J1 J2 Datasheet © Artesyn Technologies® 2005 The information and specifications contained in this datasheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein. Please consult our website for the following items: Application Note Longform Data Sheet www.artesyn.com File Name: ddr12.pdf Rev: 04 Sept 2006