DCV010515D

DCV010505P BURR-BROWN | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 11

Technical content

Miniature, 1W, 1500Vrms Isolated UNREGULATED DC/DC CONVERTERS © 2000 Burr-Brown Corporation PDS-1592B Printed in U.S.A. August, 2000 DCV01 Series International Airport Industrial Park • Mailing Address: PO Box 11400, Tucson, AZ 85734 • Street Address: 6730 S. Tucson Blvd., Tucson, AZ 85706 • Tel: (520) 746-1111 Twx: 910-952-1111 • Internet: http://www.burr-brown.com/ • Cable: BBRCORP • Telex: 066-6491 • FAX: (520) 889-1510 • Immediate Product Info: (800) 548-6132

FEATURES

l UP TO 85% EFFICIENCY l THERMAL PROTECTION l DEVICE-TO-DEVICE SYNCHRONIZATION l SHORT-CIRCUIT PROTECTION l EN55022 CLASS B EMC PERFORMANCE l UL1950 RECOGNIZED COMPONENT l JEDEC PDIP-14 AND GULL-WING PACKAGES

DESCRIPTION

The DCV01 series is a family of 1W, 1500Vrms isolated, unregulated DC/DC converters. Requiring a minimum of external components and including on- chip device protection, the DCV01 series provides extra features such as output disable and synchroniza- tion of switching frequencies. The use of a highly integrated package design results in highly reliable products with a power density of 40W/in 3 (2.4W/cm3). This combination of features, high isolation, and small size makes the DCV01 suit- able for a wide range of applications.

APPLICATIONS

l POINT-OF-USE POWER CONVERSION l GROUND LOOP ELIMINATION l DATA ACQUISITION l TEST EQUIPMENT l SECONDARY ISOLATION CIRCUITS For most current data sheet and other product information, visit www.burr-brown.com IBIAS Power Stage VOUT ÷ 2 Reset 800kHz Oscillator Watch-dog/ start-up PSU Thermal Shutdown SYNC OUT SYNC IN VS Power Controller IC DCV01 DCV01 SBVS014

The information provided herein is believed to be reliable; however, BURR-BROWN assumes no responsibility for inaccuracies or omissions. BURR-BROWN assumes no responsibility for the use of this information, and all use of such information shall be entirely at the user’s own risk. Prices and specifications are subject to change without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. BURR-BROWN does not authorize or warrant any BURR-BROWN product for use in life support devices and/or systems. INPUT OUTPUT LOAD NO LOAD BARRIER LEAKAGE VOLTAGE (V) VOLTAGE (V) REGULATION (%) CURRENT (mA) EFFICIENCY (%) CAPACITANCE (pF) CURRENT ( µA) VS VNOM IQ C ISO 75% LOAD (2) 10% TO 100% LOAD (3) 0% LOAD 100% LOAD V ISO = 750Vrms V ISO = 750Vrms PRODUCT MIN TYP MAX MIN TYP MAX TYP MAX TYP TYP TYP TYP DCV011512D NOTES: (1) During UL1950 recognition tests only, UL File #E199929. (2) 100% Load Current = 1W/VNOM TYP. (3) Load regulation = (VOUT at 10% – VOUT at 100%)/ VOUT at 75%. (4) Scheduled availability Q4 2000. SPECIFICATIONS At TA = +25°C, unless otherwise specified. DCV01 SERIES PARAMETER CONDITIONS MIN TYP MAX UNITS OUTPUT Power 100% Full Load 0.97 W Ripple O/P Capacitor = 1 µF, 50% Load 20 mVp-p Voltage vs Temp Room to Cold 0.046 %/ °C Room to Hot 0.016 %/ °C INPUT Voltage Range on VS –10 10 % ISOLATION Voltage 1s Flash Test 1.5 kVrms 60s Test, UL1950(1) 1.5 kVrms LINE Regulation 1 %/1% of V S SWITCHING/SYNCHRONIZATION Oscillator Frequency (fOSC ) Switching Frequency = f OSC /2 800 kHz Sync Input Low 0 0.4 V Sync Input Current V SYNC = +2V 75 µA Disable Time 2 µs Capacitance Loading on SYNCIN Pin External 3 pF RELIABILITY Demonstrated T A = +55°C 75 FITS THERMAL SHUTDOWN IC Temperature at Shutdown 150 °C Shutdown Current 3m A TEMPERATURE RANGE Operating –40 +85 °C

Basic Model Number: 1W Product Voltage Input: 5V In Voltage Output: 5V Out Dual Output: Package Code: P = PDIP-14 P-U = PDIP-14 Gull-Wing ELECTROSTATIC DISCHARGE SENSITIVITY This integrated circuit can be damaged by ESD. Burr-Brown recommends that all integrated circuits be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage. ESD damage can range from subtle performance degrada- tion to complete device failure. Precision integrated circuits may be more susceptible to damage because very small parametric changes could cause the device not to meet its published specifications. Input Voltage: ABSOLUTE MAXIMUM RATINGS

ORDERING INFORMATION

05 ()(D ) PACKAGE SPECIFIED DRAWING TEMPERATURE PACKAGE ORDERING TRANSPORT PRODUCT PACKAGE NUMBER RANGE MARKING NUMBER (1) MEDIA Single DCV010505P DIP-14 010-1 –40 °C to +85°C DCV010505P DCV010505P Rails DCV010505P-U Gull-Wing-14 010-2 –40 °C to +85°C DCV010505P-U DCV010505P-U/700 Tape and Reel DCV010512P DIP-14 010-1 –40 °C to +85°C DCV010512P DCV010512P Rails DCV010512P-U Gull-Wing-14 010-2 –40 °C to +85°C DCV010512P-U DCV010512P-U/700 Tape and Reel DCV010515P DIP-14 010-1 –40 °C to +85°C DCV010515P DCV010515P Rails DCV010515P-U Gull-Wing-14 010-2 –40 °C to +85°C DCV010515P-U DCV010515P-U/700 Tape and Reel DCV012405P (2) DIP-14 010-1 –40 °C to +85°C DCV012405P DCV012405P Tape and Reel DCV012405P-U (2) Gull-Wing-14 010-2 –40 °C to +85°C DCV012405P-U DCV012405P-U/700 Rails Dual DCV010505DP (2) DIP-14 010-1 –40 °C to +85°C DCV010505DP DCV010505DP Rails DCV010505DP-U (2) Gull-Wing-14 010-2 –40 °C to +85°C DCV010505DP-U DCV010505DP-U/700 Tape and Reel DCV010512DP DIP-14 010-1 –40 °C to +85°C DCV010512DP DCV010512DP Rails DCV010512DP-U Gull-Wing-14 010-2 –40 °C to +85°C DCV010512DP-U DCV010512DP-U/700 Tape and Reel DCV010515DP DIP-14 010-1 –40 °C to +85°C DCV010515DP DCV010515DP Rails DCV010515DP-U Gull-Wing-14 010-2 –40 °C to +85°C DCV010515DP-U DCV010515DP-U/700 Tape and Reel DCV011512DP (2) DIP-14 010-1 –40 °C to +85°C DCV011512DP DCV011512DP Rails DCV011512DP-U (2) DIP-14 010-2 –40 °C to +85°C DCV011512DP-U DCV011512DP-U/700 Tape and Reel DCV011515DP (2) Gull-Wing-14 010-1 –40 °C to +85°C DCV011515DP DCV011515DP Rails DCV011515DP-U (2) DIP-14 010-2 –40 °C to +85°C DCV011515DP-U DCV011515DP-U/700 Tape and Reel DCV012415DP (2) Gull-Wing-14 010-1 –40 °C to +85°C DCV012415DP DCV012415DP Rails DCV012415DP-U (2) DIP-14 010-2 –40 °C to +85°C DCV012415DP-U DCV012415DP-U/700 Tape and Reel NOTE: (1) Models with a slash (/) are available only in Tape and Reel in the quantities indicated (e.g., /700 indicates 700 devices per reel). Ordering 700 pieces of “DCP010505BP-U/700” will get a single 700-piece Tape and Reel. (2) Scheduled availability Q4 2000. PACKAGE/ORDERING INFORMATION DCV01

PIN CONFIGURATION (Single-DIP and Gull-Wing) Top View DIP PIN CONFIGURATION (Dual-DIP and Gull-Wing) PIN DEFINITION (Single-DIP) PIN # PIN NAME DESCRIPTION 1V S Voltage Input 2 0V Input Side Common 5 0V Output Side Common 6+ V OUT +Voltage Out

7 NC Not Connected

8 SYNC OUT Unrectified Transformer Output

14 SYNC IN Synchronization Pin

PIN DEFINITION (Dual-DIP) PIN # PIN NAME DESCRIPTION 1V S Voltage Input 2 0V Input Side Common 5 0V Output Side Common 6+ V OUT +Voltage Out 7– V OUT –Voltage Out V S +V OUT –VOUT SYNC IN SYNC OUT DCV01 V S +V OUT NC SYNC IN SYNC OUT

TYPICAL PERFORMANCE CURVES At TA = +25°C, unless otherwise noted. DCV010505 OUTPUT RIPPLE vs LOAD (20MHz BW) Load (%) Ripple (mVp-p) 20 30 50 70 60 80 90 1004010 1µF Ceramic 4.7µF Ceramic 10µF Ceramic DCV010512D V OUT vs LOAD Load (%) VOUT (V) 14.5 14.0 13.5 13.0 12.5 12.0 11.5 11.0 10.5 10.00 20 30 50 70 60 80 90 1004010 +VOUT –VOUT DCV010512D EFFICIENCY vs LOAD Load (%) Efficiency (%) 20 30 50 70 60 80 90 1004010 DCV010515D V OUT vs LOAD Load (%) VOUT (V) 20 30 50 70 60 80 90 1004010 +VOUT –VOUT DCV010515D EFFICIENCY vs LOAD Load (%) Efficiency (%) 20 30 50 70 60 80 90 1004010 DCV012405 V OUT vs LOAD Load (%) VOUT (V) 5.60 5.50 5.40 5.30 5.20 5.10 5.00 4.90 4.80 20 30 60 50 70 80 1004010

TYPICAL PERFORMANCE CURVES (Cont.) At TA = +25°C, unless otherwise noted. DCV012405 EFFICIENCY vs LOAD Load (%) Efficiency (%) 20 30 70 60 80 90 10040 5010 DCV010505 CONDUCTED EMISSIONS (125% Load) Emission Level, Peak (dBµA) Frequency (MHz) 10.15 10 30 –10 –20 DCV010505 CONDUCTED EMISSIONS (8% Load) Emission Level, Peak (dBµA) Frequency (MHz) 10.15 10 30 –10 –20

FIGURE 1. Connecting the DCV01 in Series. give good isolation and low barrier capacitance. 400kHz (divide by 2 from 800kHz oscillator). and is used to minimize system noise. switching frequencies between the DC/DC converters. switching frequency, or even stopping the oscillator circuit. The DCV01’s basic construction is the same as standard ICs. DC/DC converter with inherently high reliability. cause the DCV01 to be enabled. in order to prevent a reduction in the oscillator frequency. DCV01 in versions is recommended.

Orderable Device Status(1) Package Type Package Drawing Pins Package Qty Eco Plan(2) Lead/Ball FinishMSL Peak Temp (3) DCV010505DP ACTIVE PDIP NVA 7 25 TBD CU SNPB Level-NA-NA-NA DCV010505DP-U ACTIVE SOP DUA 7 25 TBD CU SNPB Level-3-240C-168 HR DCV010505DP-U/700 ACTIVE SOP DUA 7 700 TBD CU SNPB Level-3-240C-168 HR DCV010505P ACTIVE PDIP NVA 7 25 TBD CU SNPB Level-NA-NA-NA DCV010505P-U ACTIVE SOP DUA 7 25 TBD CU SNPB Level-3-240C-168 HR DCV010505P-U/700 ACTIVE SOP DUA 7 700 TBD CU SNPB Level-3-240C-168 HR DCV010512DP ACTIVE PDIP NVA 7 25 TBD CU SNPB Level-NA-NA-NA DCV010512DP-U ACTIVE SOP DUA 7 25 TBD CU SNPB Level-3-240C-168 HR DCV010512DP-U/700 ACTIVE SOP DUA 7 700 TBD CU SNPB Level-3-240C-168 HR DCV010512P ACTIVE PDIP NVA 7 25 TBD CU SNPB Level-NA-NA-NA DCV010512P-U ACTIVE SOP DUA 7 25 TBD CU SNPB Level-3-240C-168 HR DCV010512P-U/700 ACTIVE SOP DUA 7 700 TBD CU SNPB Level-3-240C-168 HR DCV010515DP ACTIVE PDIP NVA 7 25 TBD CU SNPB Level-NA-NA-NA DCV010515DP-U ACTIVE SOP DUA 7 25 TBD CU SNPB Level-3-240C-168 HR DCV010515DP-U/700 ACTIVE SOP DUA 7 700 TBD CU SNPB Level-3-240C-168 HR DCV010515P ACTIVE PDIP NVA 7 25 TBD CU SNPB Level-NA-NA-NA DCV010515P-U ACTIVE SOP DUA 7 25 TBD CU SNPB Level-3-240C-168 HR DCV010515P-U/700 ACTIVE SOP DUA 7 700 TBD CU SNPB Level-3-240C-168 HR DCV011512DP ACTIVE PDIP NVA 7 25 TBD CU NIPDAU Level-NA-NA-NA DCV011512DP-U ACTIVE SOP DUA 7 25 TBD CU NIPDAU Level-3-240C-168 HR DCV011512DP-U/700 ACTIVE SOP DUA 7 700 TBD CU NIPDAU Level-3-240C-168 HR DCV011515DP ACTIVE PDIP NVA 7 25 TBD CU SNPB Level-NA-NA-NA DCV011515DP-U ACTIVE SOP DUA 7 25 TBD CU SNPB Level-3-240C-168 HR DCV011515DP-U/700 ACTIVE SOP DUA 7 700 TBD CU SNPB Level-3-240C-168 HR DCV012405P ACTIVE PDIP NVA 7 25 TBD CU SNPB Level-NA-NA-NA DCV012405P-U ACTIVE SOP DUA 7 25 TBD CU SNPB Level-3-240C-168 HR DCV012405P-U/700 ACTIVE SOP DUA 7 700 TBD CU SNPB Level-3-240C-168 HR DCV012415DP ACTIVE PDIP NVA 7 25 TBD CU SNPB Level-NA-NA-NA DCV012415DP-U ACTIVE SOP DUA 7 25 TBD CU SNPB Level-3-235C-168 HR DCV012415DP-U/700 ACTIVE SOP DUA 7 700 TBD CU SNPB Level-3-235C-168 HR (1)The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS) or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontentfor the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS):TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Green (RoHS & no Sb/Br):TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) PACKAGE OPTION ADDENDUM www.ti.com 25-Aug-2005 Addendum-Page 1

(3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. PACKAGE OPTION ADDENDUM www.ti.com 25-Aug-2005 Addendum-Page 2

Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Amplifiers amplifier.ti.com Audio www.ti.com/audio Data Converters dataconverter.ti.com Automotive www.ti.com/automotive DSP dsp.ti.com Broadband www.ti.com/broadband Interface interface.ti.com Digital Control www.ti.com/digitalcontrol Logic logic.ti.com Military www.ti.com/military Power Mgmt power.ti.com Optical Networking www.ti.com/opticalnetwork Microcontrollers microcontroller.ti.com Security www.ti.com/security Telephony www.ti.com/telephony Video & Imaging www.ti.com/video Wireless www.ti.com/wireless Mailing Address: Texas Instruments Post Office Box 655303 Dallas, Texas 75265 Copyright  2005, Texas Instruments Incorporated