DCH2 EMERSON-NETWORKPOWER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Rev. 6.30.09_24 DCH2 Series of 3 Embedded Power for Business-Critical Continuity DCH2 Series

2 Watts

  • Switching wallmount power supply
  • Available in multiple AC plug configurations
  • CE Mark EMC & LVD
  • Universal AC input
  • Overload and short circuit protection
  • Constant voltage, constant current output
  • Built in EMI filter (CISPR 22 Class B)
  • No load power consumption < 300 mW Total Power: 2 Watts Input Voltage: 90-264 VAC # of Outputs: Single Safety Input Input range: 90-264 VAC (wide range) Frequency: 47-63 Hz EMI/RFI: FCC Part 15, Subpart B Class B & EN55022 (CISPR 22) Class B & EMC89/336/EEC Safety ground leakage current: 10µa @ 50/60 Hz, 230 VAC input Output Voltage (Vo): 6.5 V (6.5 V - 10 V) Maximum Power (Po): 2 W Hold-up time: 12 ms. typical at full load @ 115 VAC Overvoltage protection: 25% above nominal output maximum (?) Latching type Overload protection: Output short circuit protection auto recover Overload protected > 2 A Output cable/ connector barrel polarity: DC cable with 2.8 mm x 5.5 mm barrel plug right angle DC plug center +V; DC plug outer -V Operating temperature: 0° to 45 °C ambient Storage temperature: -30 °C to +85 °C Electromagnetic susceptibility: Designed to meet EN55082-1 Humidity: Operating; non-condensing 20% to 90% RH Vibration: Per IEC 60068-2-6 Environmental Specifications UL 60950 / 6500 CSA 60950 TUV 60950 NEMKO 60950 CB Certificate and report CE EMC & LVD Electrical Specifications

0.70” (17.9) 1.50” (38) 72.83” (1850) 1.75” (44.4) 1.50” (38 ± 0.2) 1.02” (26) PIN OUT DETAIL OD (-) ID (+) 1.75” (44.4) 0.374” (9.5) Rev. 6.30.09_24 DCH2 Series 2 of 3 Embedded Power for Business-Critical Continuity

Ordering Information

P/P (PARD)1 DCH2-050US-0001 2 W 6.5 V 0 0.3 A 0.5 A 800 mV DCH2-050EU-0001 2 W 6.5 V 0 0.3 A 0.5 A 800 mV DCH2-050UK-0001 2 W 6.5 V 0 0.3 A 0.5 A 800 mV DCH2-050AU-0001 2 W 6.5 V 0 0.3 A 0.5 A 800 mV 1. Peak-to-peak with 1 MHz bandwidth and 10 µF (tantalum capacitor) in parallel with a 0.1 µF capacitor at rated line voltage and load ranges. 2. Output should not be crounded for EMI purpose. Mechanical Drawings DCH2-050US-0001 0.70” (17.9) 1.50” (38) 72.83” (1850) 0.55” (14) 1.75” (44.4) 1.42” (36.1) PIN OUT DETAIL OD (-) ID (+) 0.374” (9.5) DCH2-050EU-0001

Rev. 6.30.09_24 DCH2 Series 3 of 3 Embedded Power for Business-Critical Continuity Mechanical Drawings Continued Notes: 1. Specifications subject to change without notice. 2. All dimensions in inches (mm), tolerance is ± .02”­ 3. Warranty: 2 year PIN OUT DETAIL OD (-) ID (+) 2.00” (51) 1.69” (43.6) 72.83” (1850) 0.80” (20.4) DCH2-050UK-0001 Americas

5810 Van Allen Way

Carlsbad, CA 92008 USA Telephone: +1 760 930 4600 Facsimile: +1 760 930 0698 Europe (UK) Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom Telephone: +44 (0) 1384 842 211 Facsimile: +44 (0) 1384 843 355 Asia (HK) 14/F, Lu Plaza

2 Wing Yip Street

Kwun Tong, Kowloon Hong Kong Telephone: +852 2176 3333 Facsimile: +852 2176 3888 For global contact, visit: www.PowerConversion.com techsupport.embeddedpower @emerson.com While every precaution has been taken to ensure accuracy and completeness in this literature, Emerson Network Power assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. ©2009 Emerson Electric Co. EmersonNetworkPower.com Embedded Computing Embedded Power Monitoring Outside Plant Power Switching & Controls Precision Cooling Racks & Integrated Cabinets Services Surge Protection Emerson Network Power. The global leader in enabling business-critical continuity. AC Power Connectivity DC Power OD(-) ID(+) PIN OUT DETAIL .705” (17.9) 1.50” (38) 72.83” (1850) 1.75” (44.4)1.02” (26) .374” (9.5) DCH2-050AU-0001