DC22

DC22_V01 SCHURTER | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

Power Entry Modules with Line Filter DC22https://www.schurter.com /PG06 EMC Products IEC Appliance Inlet C14 with Filter, Line Switch 1- or 2-pole, PCB Mounting See below: Approvals and Compliances C14 70° C

Description

• Panel mount : Screw-on mounting on PCB rear-side - 3 Functions : Appliance Inlet Protection class I , Line Switch 1- or 2-pole , Line filter in standard and medical version - For PCB mounting Characteristics - Ultra-compact design - All single elements are already wired - Line switch non-illuminated or illuminated - With EMC-shield - Especially suitable for use in switching power supplies Ideal for application with high transient loads - For applications according IEC/UL 62368-1 we recommend variants with bleed resistor Suitable for use in medical equipment according to IEC/UL 60601-1 (1 MOOP , 1 MOPP) Other versions on request - Fixing on PCB with self-tapping screws 3 mm or pre-inserted nuts M3 - Other rocker marking - Illuminated green - Medical Version (M80) - Capacitance CX1 References Alternative: version without line filter DC21 Alternative: Standard version DC21 Weblinks pdf data sheet, html datasheet, General Product Information, Approvals, Distributor-Stock-Check, Accessories, Detailed request for product Newly available variants corresponding to V-Lock mating cordset. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. Technical Data Ratings IEC 1 - 10 A @ Ta 40 °C / 250 VAC; 50 Hz Ratings UL/CSA 1 - 10 A @ Ta 40 °C / 250 VAC; 60 Hz Leakage Current standard < 0.5 mA (250 V / 60 Hz) medical < 5 µA (250 V / 60 Hz) Dielectric Strength > 1.7 kVDC between L-N > 2.7 kVDC between L/N-PE Test voltage (2 sec) Allowable Operation Tempe- rature -25 °C to 85 °C Climatic Category 25/085/21 acc. to IEC 60068-1 IP-Protection front side IP40 acc. to IEC 60529 Protection Class Suitable for appliances with protection class I acc. to IEC 61140 Terminal For PCB mounting : Ground terminal: Quick connect terminals 6.3 x 0.8 mm angled to pin axis Panel Thickness S Screw: max 4 mm Mounting screw torque max 0.5 Nm Material: Housing Thermoplastic, black, UL 94V-0 Appliance inlet/-outlet C14 acc. to IEC 60320-1, UL 498 CSA C22.2 no. 42 (for cold conditions) pin-temperature 70 °C, 10 A, Protection Class I Line Switch Rocker switch 1-/2-pole, non-illumi- nated or illuminated red, acc. to IEC 61058-1 Technical Details Line Filter Standard and Medical Version, IEC 60939, UL 1283, CSA C22.2 no. 8 Technical Details MTBF > 2'100'000 h acc. to MIL-HB-217 F Approvals and Compliances

Power Entry Modules with Line FilterDC22 https://www.schurter.com /PG06 EMC Products Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF 16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agree- ments by SCHURTER. Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: DC22 Approval Logo Certificates Certification Body Description VDE Approvals VDE Certificate Number: 40001522 UL Approvals UL UL File Number: E72928 Product standards Product standards that are referenced Organization Design Standard Description Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes Designed according to IEC 60939 Passive filters for suppressing electromagnetic interference Designed according to IEC 61058-1 Switches for appliances. Part 1. General requirements Designed according to UL 498 Standard for Attachment Plugs and Receptacles Designed according to UL 1283 Electromagnetic interference filters Designed according to CSA C22.2 no. 42 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices Designed according to CSA C22.2 no. 8 Electromagnetic interference (EMI) filters Application standards Application standards where the product can be used Organization Design Standard Description Designed for applications acc. IEC/UL 62368-1 Audio/video, information and communication technology equipment - Part 1: Safety requirements Designed for applications acc. IEC 60601-1 Medical electrical equipment - Part 1: General requirements for basic safety and essential performance Compliances The product complies with following Guide Lines Identification Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. UKCA declaration of conformity SCHURTER AG The UKCA marking declares that the product complies with the applicable requirements laid down in the British Amendment of Regulation (EC) 765/2008. RoHS SCHURTER AG Directive RoHS 2011/65/EU, Amendment (EU) 2015/863 China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. SCHURTER AG V-Lock system are based on a matching plug-dose combination. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. Medical Equipment SCHURTER AG Suitable for use in medical equipment according to IEC/UL 60601-1 (1 MOOP , 1 MOPP)

Power Entry Modules with Line Filter DC22https://www.schurter.com /PG06 EMC Products Dimension [mm] Screw-on mounting 342.5 37.64.5 8.1 1.25 R 5.130 2.2 16.2 32.7 0.85 47.05 R 46.05 19.5 10.53.95 ±0.15 30.4 4.3 3.6 R4.2 34.4 46.8 NP EL 57.6 47.6 4.25.8 2.8 32.5 ±0.05 ±0.10 ±0.10 1) all pins 28.4 41 6.6 R4.4 3.4 6.05 1.6 32.7 ±0.10 ±0.1516.2 ±0.2038 +0.10 ±0.20 3.6 1.6 +0.10 PE L N 2) PE additionally as quick-connect terminal 6.3 x 0.8 Technical Data of Filter-Components Rated Current [A] Filter-Type Inductances L [mH] Capacitance CX [nF] Capacitance CY [nF] R [MΩ] 1 Standard version 2 x 10 100 2.2 1 2 Standard version 2 x 4 100 2.2 1 4 Standard version 2 x 1.5 100 2.2 1 6 Standard version 2 x 0.8 100 2.2 1 10 Standard version 2 x 0.3 100 2.2 1

1 Medical Version (M5) 2 x 10 100 - 1

2 Medical Version (M5) 2 x 4 100 - 1

4 Medical Version (M5) 2 x 1.5 100 - 1 6 Medical Version (M5) 2 x 0.8 100 - 1 10 Medical Version (M5) 2 x 0.3 100 - 1

Power Entry Modules with Line FilterDC22 https://www.schurter.com /PG06 EMC Products Diagrams Standard filter 1-pole L PE N Cx Cy Cy PE’ R 1) 2) 1) Line 2) Load Standard filter 2-pole L PE N Cx Cy Cy PE’ R 1) 2) 1) Line 2) Load Medical filter 1-pole (M5) L PE N Cx PE’ R 1) 2) 1) Line 2) Load Medical Version (M5) 2-pole L PE N Cx PE’ R 1) 2) 1) Line 2) Load Standard filter 2-pole illuminated L PE N Cx Cy Cy PE’ 1) 2) 1) Line 2) Load Medical Filter 2-pole (M5) illuminated L PE N Cx PE’ 1) 2) 1) Line 2) Load Attenuation Loss - - - - 50Ω differential mode _____ 50Ω common mode Standard version 1 A 2 A 4 A 6 A 10 A

Power Entry Modules with Line Filter DC22https://www.schurter.com /PG06 EMC Products Medical version (M5) 1 A 2 A 4 A 6 A 10 A All Variants Rated current Filter-Type Line Switch Illumination Color Weight [g] V-Lock Order Number 1 Standard version 1-pole - 67 g l DC22.1111.111 2 Standard version 1-pole - 67 g l DC22.2111.111 4 Standard version 1-pole - 67 g l DC22.4111.111 6 Standard version 1-pole - 67 g l DC22.6111.111 10 Standard version 1-pole - 67 g l DC22.9111.111 1 Standard version 2-pole - 67 g l DC22.1121.111 2 Standard version 2-pole - 67 g l DC22.2121.111 4 Standard version 2-pole - 67 g l DC22.4121.111 6 Standard version 2-pole - 67 g l DC22.6121.111 10 Standard version 2-pole - 67 g l DC22.9121.111 1 Standard version 2-pole l red 67 g l DC22.1123.111 2 Standard version 2-pole l red 67 g l DC22.2123.111 4 Standard version 2-pole l red 67 g l DC22.4123.111 6 Standard version 2-pole l red 67 g l DC22.6123.111 10 Standard version 2-pole l red 67 g l DC22.9123.111 1 Medical Version (M5) 2-pole - 67 g l DC22.1221.111 2 Medical Version (M5) 2-pole - 67 g l DC22.2221.111 4 Medical Version (M5) 2-pole - 67 g l DC22.4221.111 6 Medical Version (M5) 2-pole - 67 g l DC22.6221.111 10 Medical Version (M5) 2-pole - 67 g l DC22.9221.111 1 Medical Version (M5) 2-pole l red 67 g l DC22.1223.111 2 Medical Version (M5) 2-pole l red 67 g l DC22.2223.111 4 Medical Version (M5) 2-pole l red 67 g l DC22.4223.111 6 Medical Version (M5) 2-pole l red 67 g l DC22.6223.111 10 Medical Version (M5) 2-pole l red 67 g l DC22.9223.111 Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER Packaging unit 10 Pcs

Power Entry Modules with Line FilterDC22 https://www.schurter.com /PG06 EMC Products Accessories Cord retaining strain relief Flat head, H 4700.0008 Mating Outlets/Connectors Category / Description Appliance Outlet Overview complete 4787, Mounting: Screw-on mounting, Appliance Outlet: IEC Solder terminals, 10 A, Suitable for appliances with pro- tection class I 4787 4788, Mounting: Snap-in version, Appliance Outlet: IEC Solder / Quick Connect, 10 A, Suitable for appliances with protection class I 4788 IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder, PCB or Quick-connect Terminal 5091 Connector Overview complete

4782 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4782

4785 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4785

4300-06 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4300-06

4781 Mounting: Power Cord, Cable, Connector: IEC C15 4781

4784 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C15 4784

... Mating Outlets/Connectors shuttered Connector Overview complete

4783 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4783

Power Cord Overview complete VAC13KS, Overview, V-Lock cord retaining, diverse Connector IEC C13, diverse, black VAC13KS The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications. 04.01.2022