DC11_20 SCHURTER | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 6
Technical content
Power entry modules without line filter DC11https://www.schurter.com /PG05 Connectors IEC Appliance Inlet C14 or C18 with Line Switch 1- or 2-pole Screw-on mounting non-illuminated from front side Snap-in version non-illuminated Screw-on mounting and line Switch illuminated green See below: Approvals and Compliances C14 70° C C18 70° C
Description
- Panel mount : Screw-on version from front or rear side, snap-in version from front side - Appliance Inlet protection class I or II , Line Switch 1- or 2-pole - V-Lock notch standard - Quick connect terminals 4.8 x 0.8 mm Unique Selling Proposition - Ultra compact design - Line switch for high inrush currents - Components internally wired - V-Lock cord retaining Characteristics - All single elements are already wired - Unwired versions available on request - Line switch non-illuminated or illuminated - Ideal for application with high transient loads - Suitable for use in equipment according to IEC/UL 62368-1 Other versions on request - Unwired versions - Solder terminals - Line switch with other rocker marking References Alternative: version with line filter DC12 Substitute for type KEB1; KEB2; 6010-K Weblinks pdf data sheet, html datasheet, General Product Information, Approvals, Distributor-Stock-Check, Accessories, Detailed request for product, Landing Page Technical Data Ratings IEC 10 A / 250 VAC; 50 Hz Ratings UL/CSA 15 A / 250 VAC; 60 Hz Dielectric Strength > 2.5 kVAC between L-N > 3 kVAC between L/N-PE (1 min/50 Hz) Allowable Operation Tempe- rature -25 °C to 70 °C IP-Protection from front side IP40 acc. to IEC 60529 Protection against electric shock Suitable for appliances with protection class I or II acc. to IEC 61140 Terminal Quick connect terminals 4.8 x 0.8 mm Panel Thickness S Screw: max 6 mm Mounting screw torque max 0.5 Nm Snap-in: 1/1.5/2/2.5/3 mm Material: Housing Thermoplastic, black, UL 94V-0 Appliance inlet/-outlet C14 / C18 acc. to IEC 60320-1, UL 60320-1, CSA C22.2 no. 60320-1 (for cold conditions) pin-temperature 70 °C, 10 A, Protection Class I or II Line Switch Rocker switch 1 or 2 pole, non-illumina- ted or illuminated, acc. to IEC 61058-1 Technical Details Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF 16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agree- ments by SCHURTER.
Power entry modules without line filterDC11 https://www.schurter.com /PG05 Connectors Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: DC11 Approval Logo Certificates Certification Body Description VDE Approvals VDE Certificate Number: 40007009 UL Approvals UL UL File Number: E96454 CCC Approvals CCC CCC Certificate Number: 2013010204594013 Product standards Product standards that are referenced Organization Design Standard Description Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes Designed according to IEC 61058-1 Switches for appliances. Part 1. General requirements Designed according to UL 60320-1 Standard for Attachment Plugs and Receptacles Designed according to CSA C22.2 no. 60320-1 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices Application standards Application standards where the product can be used Organization Design Standard Description Designed for applications acc. IEC/UL 62368-1 IEC 62368-1 includes the basic requirements for safety of audio, video, information technology and office equipment. Designed for applications acc. IEC 60335-1 Safety of electrical appliances for household and similar purposes. Meets the requirements for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-11 or -12 & -13. Compliances The product complies with following Guide Lines Identification Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. RoHS SCHURTER AG Directive RoHS 2011/65/EU, Amendment (EU) 2015/863 China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. Landing Page V-Lock SCHURTER AG V-Lock system are based on a matching plug-dose combination. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. White Paper Glow wire test SCHURTER AG Meets the requirements of IEC 60335-1 for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. to IEC
Power entry modules without line filter DC11https://www.schurter.com /PG05 Connectors Dimensions [mm] Screw-on mounting 31.31.35 R 2.527.3R 4 32.3 2.2 17.99.8 4.2 9.65 ±0.10 27.6 R 2.4 31.6 ±0.10 ±0.10 ±0.10 31.15 R 3.8 R 6 3.2 6.3x90° 3.6/M3 1) 1-pol non-illuminated 2) 2-pol illuminated, 2-pol non-illuminated Snap-in mounting 31.31.35 R 2.527.3R 4 32.3 2.2 17.99.8 4.2 ±0.1S 9.65 ±0.10 27.6 R 2.4 31.6 ±0.10 ±0.10 31.15 R 3.8 1) 1-pol non-illuminated 2) 2-pol illuminated, 2-pol non-illuminated
Power entry modules without line filterDC11 https://www.schurter.com /PG05 Connectors Diagrams Line switch non-illuminated 2-pole L N PE PE' 1) Line 2) Load Line switch illuminated 2-pole PE' L N PE 2)1) 1) Line 2) Load Line switch non-illuminated 1-pole L N PE PE' 1) Line 2) Load All Variants Rated Current UL Protection Class Panel mounting Panel Thickness s [mm] Line Switch Illumination Color Order Number 15 I Snap-in 1.5 2-pole l red DC11.0021.201 15 I Snap-in 1.5 2-pole l red DC11.0021.206 15 I Snap-in 2 2-pole l red DC11.0021.301 15 I Snap-in 2.5 2-pole l red DC11.0021.401 15 I Snap-in 1.5 2-pole l green DC11.0031.201 █ 15 I Snap-in 2 2-pole l green DC11.0031.301 15 I Snap-in 2.5 2-pole l green DC11.0031.401 15 I Snap-in 1.5 1-pole - DC11.0001.203 █ 15 I Snap-in 1.5 1-pole - DC11.0001.207 15 I Snap-in 2 1-pole - DC11.0001.303 15 I Snap-in 2.5 1-pole - DC11.0001.403 15 I Snap-in 1.5 2-pole - DC11.0001.201 █ 15 I Snap-in 1.5 2-pole - DC11.0001.206 15 I Snap-in 2 2-pole - DC11.0001.301 █ 15 II Snap-in 2 2-pole - DC11.0001.351 15 I Snap-in 2.5 2-pole - 3-107-445 15 I Snap-in 2.5 2-pole - DC11.0001.401 █ 15 I Snap-in 3 2-pole - DC11.0001.501 15 I Screw - 2-pole l red DC11.0021.001 █ 15 I Screw - 2-pole l red DC11.0021.006 15 I Screw - 2-pole l green DC11.0031.001 █ 15 I Screw - 1-pole - DC11.0001.003 █ 15 I Screw - 1-pole - DC11.0001.007 15 I Screw - 2-pole - DC11.0001.001 █ 15 I Screw - 2-pole - DC11.0001.006 █ Most Popular. Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER With screw mounting on PCB, 2 screws are included All variants according VDE (ENEC 10) approved for 10 A Packaging unit 50 Pcs
Power entry modules without line filter DC11https://www.schurter.com /PG05 Connectors Accessories Wire harness for SCHURTER products Assorted Covers Rear Cover 0859.0047 4311.9403 Cord retaining kits Cord retaining strain relief Flat head, A 4700.0001 Countersunk, B 4700.0002 Mating Outlets/Connectors Category / Description Appliance Outlet Overview complete 4787, Mounting: Screw-on mounting, Appliance Outlet: IEC Solder terminals, 10 A, Suitable for appliances with pro- tection class I 4787 4788, Mounting: Snap-in version, Appliance Outlet: IEC Solder terminals or quick connect terminals, 10 A, Suitable for appliances with protection class I 4788 IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder, PCB or Quick-connect Terminal 5091 Appliance Outlet further types to DC11 Connector Overview complete
4782 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4782
4785 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4785
4012 Mounting: Power Supply Cord, 3 x 1 mm², Screw clamps, Connector: IEC C13 4012
4300-06 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4300-06
4781 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C15 4781
Connector further types to DC11 ... Power Supply Cord Overview complete Cord Sets 10 A, Europlug, 2.5 m, Connector IEC C13, H05VV-F3G1.0, black 6004.0215 Cord Sets 10 A, Europlug, 2.5 m, Connector IEC C13, H05VV-F3G1.0, black 6003.0215 Power Supply Cord further types to DC11
Power entry modules without line filterDC11 https://www.schurter.com /PG05 Connectors Mating Outlets/Connectors shuttered Connector Overview complete
4783 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4783
Connector further types to DC11 Power Cord Overview complete VAC13KS, Overview, V-Lock cord retaining, diverse Connector IEC C13, diverse, black VAC13KS VAC17KS, V-Lock cord retaining, diverse m, Connector IEC C17, diverse, black / grey / white VAC17KS Power Cord further types to DC11 The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications. 13.05.2020