DBE-1 PAIRUI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
www.pairuigroup.com Page: 1/3 Date: 05/06/2014 DC-DC Converter SIP-Package DBE-1 SERIES, 1WATT, 1KVDC, UNREGULATED FEATURES: /checkbld/checkbld /checkbld/checkbld3 years warranty /checkbld/checkbld /checkbld/checkbld1000Vdc isolation voltage /checkbld/checkbld /checkbld/checkbldOperating temperature range -40°C to +85°C /checkbld/checkbld /checkbld/checkbldCompact size Model Input voltage (Vdc) Output voltage (Vdc) Output current (mA) Efficiency Typ. Min. Max. DBE1-0310 3.3(2.97~3.63) 3.3 30 300 80% DBE1-0311 5 20 200 80% DBE1-0312 9 11 110 80% DBE1-0313 12 8.3 83 80% DBE1-0314 15 6.8 68 80% DBE1-0315 24 4.2 42 80% DBE1-0510 5(4.5~5.5) 3.3 30 300 80% DBE1-0511 5 20 200 80% DBE1-0512 9 11 110 80% DBE1-0513 12 8.3 83 80% DBE1-0514 15 6.8 68 80% DBE1-0515 24 4.2 42 80% DBE1-1210 12(10.8~13.2) 3.3 30 300 80% DBE1-1211 5 20 200 80% DBE1-1212 9 11 110 80% DBE1-1213 12 8.3 83 80% DBE1-1214 15 6.8 68 80% DBE1-1215 24 4.2 42 80% DBE1-2410 24(21.6~26.4) 3.3 30 300 80% DBE1-2411 5 20 200 80% DBE1-2412 9 11 110 80% DBE1-2413 12 8.3 83 80% DBE1-2414 15 6.8 68 80% DBE1-2415 24 4.2 42 80% Notes: other input and output models may available on request.
www.pairuigroup.com Page: 2/3 Date: 05/06/2014 DC-DC Converter SIP-Package DBE-1 SERIES, 1WATT, 1KVDC, UNREGULATED ELECTRICAL Line regulation --- ± 1.2% Load regulation 10% ~ 100% full load 15% max. Ripple and noise --- 100mVp-p max. Isolation voltage --- 1000Vdc Operating temperature range --- -40°C to +85°C MTBF --- 3.5x10 6Hrs Notes: All the data in this article are under test with “TA+25°C, humidity<75%, rated input and rated load” mode. MECHANICAL 11.5 (0.453) 10.0 (0.394) 6.0 (0.236) 1.94 (0.076) 0.9 (0.035) 4.1 (0.161) CONNECTION PIN # SINGLE
1 GND
Note: * Unit is mm(inch). TEMPERATURE PROFILE
www.pairuigroup.com Page: 3/3 Date: 05/06/2014 DC-DC Converter SIP-Package DBE-1 SERIES, 1WATT, 1KVDC, UNREGULATED CAPACITIVE LOADS SELECTION Vin (Vdc) Cin (μF) Single Output Voltage (Vdc) Cout (μF) Dual Output Voltage (Vdc) Cout (μF) 3.3/5 4.7 5 10 ±5 4.7 12 2.2 9 4.7 ±9 2.2 24 1 12 2.2 ±12 1 - - 15/24 1 ±15 0.47 NOTES RECOMMENDED TEST AND APPLICATION CIRCUIT In order to ensure the efficiency and dependability of the module, the minimum specified load must be less than 10% of rated load. If the output power is low, we recommend to add an external 10% loading resistor in parallel. FUSE: depends on the actual input current; TVS: depends on the actual input voltage; Recommended capacitor:C1, C2, C5,about 0.1uF; for C6,C7,please check the capacitive load; C3,C4:2KV/1nF.