DB35P HY | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Features

  • Better heat dissipation
  • Low power loss RoHS COMPLIANT Mechanical Data
  • Case: Press-Fit
  • Polarity:P= ANODE ON LEAD WIRE, N= CATHODE ON LEAD WIRE Note: Products with logo or are made by HY Electronic (Cayman) Limited.

Applications

  • Generally applied in alternator, motorbike , automobile, etc. Maximum Ratings and Electrical Characteristics Rating at 25℃ ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristics Symbol Unit Reverse Breakdown Voltage @Irrm=100mA VBR V Peak Repetitive Reverse Voltage VRRM V Maximum Transient Peak Reverse Current (TW=80ms, TC=25℃) IRSM V Maximum Average Forwar@TC=170℃ 60HZ,resistive or inductive load I(AV) A Peak Forward Surge Current, 8.3mS Single Half Sine-Wave, Superimposed on Rated Load (JEDEC Method) Maximum Inst. Forward Voltage Drop,IF at 100Amp VF V Maximum DC Reverse Current at Rated @TJ=25℃ Peak Repetitive Reverse Voltage @TJ=195℃ Typical Thermal Resistance Junction to Ambient RθJA ℃/W Operating Junction Temperature Range TJ ℃ Storage Temperature Range TSTG ℃ Rev. 11, 18-May-2020 DB35P(N) Reverse Voltage - 19 to 24Volts Forward Current - 35 Amperes
  • High reliability Pb High Current Automobile Rectifier
  • High surge forward current capability Package Outline Dimensions in Inches (Millimeters) DB35P(N) 19-24 1.1 100 0.8 -40to+200 -40to+200 IFSM IR A uA 420 PRESS-FIT All d ata sheet.com

The curve above is for reference only. DB35*-S-00/99-00/01 Rev. 11, 18-May-2020 RATING AND CHARACTERISTIC CURVES DB35P(N) 0.1 100 1000 TJ=25℃ Pulse Width 300uS 2%Duty Cycle Fig. 4 - Typical Forward Characteristics I nstantaneous Forward Current (A) Instantaneous Forward Voltage (V) Fig. 2 - Maximum Non-Repetitive Surge Current Number of Cycles at 60Hz P eak Forward Surge Current (A) 100 150 200 250 300 350 400 450 1 10 100 8.3mS Single Half-Sine-Wave (JEDEC METOD) I nstantaneous Reverse Current (uA) Fig. 3 - Typical Reverse Characteristics 0.1 1.0 10.0 100.0 1000.0 20 40 60 80 100 TJ=25°C TJ=195°C Percent of Rated Peak Reverse Voltage (%) 0 25 50 75 100 125 150 175 200 Fig. 1 - Forward Current Derating Curve A verage Forward Current (A) C ase Temperature (℃) All d ata sheet.com

ALL specifications and data are subject to be changed without notice to improve reliability function or design or other reasons. HY makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the co- tinuing production of any product. To the maximum extent permitted by applicable law, HY disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,consequential or incidental d- amages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merch- antability. Statements regarding the suitability of products for certain types of applications are based on HY’s knowledge of typical require- ments that are often placed on HY products in generic applications. Such statements are not binding statements about the suitabi- lity of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application.Parameters provided in datasheets and specific- ations may vary in different applications and performance may vary over time. All operating parameters, including typical paramet- ers, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify HY’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, HY products are not designed for use in medical, life-saving, or life-sustaining applicati- ons or for any other applications in which the failure of the HY product could result in personal injury or death. Customers using or selling HY products not expressly indicated for use in such applications do so at their own risk.Please contact authorized HY pers- onnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of HY. Product names and markings noted herein may be trademarks of their respective owners. Rev. 11, 18-May-2020 Disclaimer All d ata sheet.com