DB2170207 LAPP | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
U.I. Lapp GmbH DATA SHEET IBS Yv DB2170207 valid from: 30.10.2015 Originator: PESA / PDC approved: HAPF / PDC Document: DB2170207DE page 1 of 2 All rights reserved acc. to DIN ISO 16016. PD 0019/2.2_11.10EN Application UNITRONIC BUS IBS Yv is a data cable for the field-bus system INTERBUS. The field-bus cable is designed to the requirements of the bus-system INTERBUS, the transmission characteristics are conform to the system and guarantee a high operating security during data transmission. The cable is designed for a data transmission of 500kBit/s at a length of 400m. The cable is intended for limited flexible use and for permanent installation in- and outdoor, as well as direct burial. In case of aboveground installation the outer sheath is UV-resistant. Applicable connectors: D-Sub-connector, 9pin version; Round connector, 9pin version (IP 65) Design Conductor bare copper wire 0.22 mm² (7x0.2 mm) Insulation PE-based compound Core identification code DIN 47100 Stranding Cores twisted to pairs 3 pairs stranded together Wrapping with polyester tape, 1 layer Screen Braid of tinned copper wires Outer sheath PVC-based compound TM52 Colour: black Outer sheath diameter ca. 8.8 mm Electrical properties at 20°C Loop resistance max. 186 Ω/km Insulation resistance min. 5 GΩxkm Mutual capacitance ca. 60 nF/km (at 800 Hz) Characteristic impedance 120 Ω ± 20% (64 kHz) 100 Ω ± 15% (1 MHz) Line attenuation max. 1.5 dB/100m (0.256 MHz) max. 2.4 dB/100m (0.772 MHz) max. 2.7 dB/100m (1 MHz) max. 5.2 dB/100m (4 MHz) max. 8.4 dB/100m (10 MHz) max. 11.2 dB/100m (16 MHz) max. 11.9 dB/100m (20 MHz) Near-end cross-talk min. 61 dB (0.772 MHz) min. 59 dB (1 MHz) min. 55 dB (2 MHz) min. 50 dB (4 MHz) min. 46 dB (8 MHz) min. 44 dB (10 MHz) min. 41 dB (16 MHz) min. 40 dB (20 MHz) Velocity of propagation nom. 0.66c Transfer impedance max. 250 mΩ/m (30 MHz) Peak working voltage 250 V (not for power purposes) Test voltage C/C: 1500 V C/S: 1000 V
U.I. Lapp GmbH DATA SHEET IBS Yv DB2170207 valid from: 30.10.2015 Originator: PESA / PDC approved: HAPF / PDC Document: DB2170207DE page 2 of 2 All rights reserved acc. to DIN ISO 16016. PD 0019/2.2_11.10EN Mechanical and thermal properties Minimum bending radius Fixed installation: 8 x cable Ø Temperature range Occasional flexing: - 5˚C up to +70˚C Fixed installation: -30˚ C up to +80˚ C Flammability flame retardant acc. to IEC 60332-1-2 General requirements This cable is conform to the EU-Directive 2011/65/EU (RoHS, Restriction of the use of certain hazardous substances).