DAQ-2213

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 1

Technical content

Features

■ Supports a 32-Bit 3.3 V or 5 V PCI bus (DAQ-2213, DAQ-2214) ■ x1 lane PCI Express® Interface (DAQe-2213, DAQe-2214) ■ Onboard 1 k-sample A/D FIFO ■ Bipolar or unipolar analog input ranges ■ Programmable gains: x1, x2, x4, x8 ■ 512-configuration channel gain queue ■ Scatter-gather DMA ■ 2-CH 12-Bit multiplying analog outputs with waveform generation (DAQ/DAQe-2214) ■ Onboard 1 k-sample D/A FIFO (DAQ-2214, DAQe-2214) ■ 24-CH TTL digital input/output ■ 2-CH 16-Bit general-purpose timer/counter ■ Analog and digital triggering ■ Fully auto calibration ■ Multiple cards synchronization through SSI (System Synchronization Interface) bus ■ Supported Operating System

• Windows 7/8 x64/x86, Linux ■ Driver and SDK
• LabVIEW , MATLAB, C/C++, Visual Basic, Visual Studio.NET ■ Software Utility
• AD-Logger DAQ/DAQe-2213/2214 Ordering Information / Quick Selection Guide Specifications DAQ-2213/2214 16-CH 16-Bit 250 kS/s Low-Cost Multi-Function DAQ Cards DAQe-2213 / 2214 DAQ-2213 / 2214 T erminal Boards & Cables ■ DIN-68S-01 ■ ACL-10568-1 ■ ACL-SSI-2/3/4 (for DAQ/DAQe-2214) * For more information on mating terminal board and cables, please refer to P3-48/49. High-Performance DAQ Model Name Analog Input Analog Output DIO Timer/Counter No. of channels Resolution Sampling rate Input range No. of channels Resolution Sampling rate No. of channels No. of channels DAQ/DAQe-2213 8 DI/16 SE 16 Bit 250 kS/s ±1.25 V to ±10 V - - - 24-CH 8255 PIO 2-CH, 16-Bit DAQ/DAQe-2214 8 DI/16 SE 16 Bit 250 kS/s ±1.25 V to ±10 V 2 12 Bit 1 MS/s 24-CH 8255 PIO 2-CH, 16-Bit Model Name DAQ/DAQe-2213 DAQ/DAQe-2214 Resolution 16 Bit, no missing codes Number of channels 16 single-ended or 8 differential (software selectable per channel) Channel gain queue size 512 Maximum update rate 250 kS/s Programmable gain 1, 2, 4, 8 Bipolar input ranges ±10 V, ±5 V, ±2.5 V, ±1.25 V Unipolar input ranges 0-10 V, 0-5 V, 0-2.5 V, 0-1.25 V Offset error ±1 mV Gain error ±0.06% of FSR Input coupling DC Overvoltage protection Power on: Continuous ±30 V, Power off: Continuous ±15 V Input impedance 1 GΩ /100 pF Trigger sources Software, external digital/analog trigger, SSI bus Trigger modes Pre-trigger, post-trigger, middle-trigger, delay-trigger, and repeated trigger FIFO buffer size 1 k samples Data transfers Polling, scatter-gather DMA Number of channels - 2 voltage outputs Resolution - 12 Bit Output ranges - 0-10 V, ±10 V, 0-AOEXTREF, ±AOEXTREF Maximum update rate - 1 μs Slew rate - 20 V / μs Settling time - 3 μs to ±0.5 LSB accuracy Offset error - ±2 mV Gain error - ±0.04% of max. output Driving capacity - ±5 mA Stability - Any passive load, up to 1500 pF Trigger sources - Software, external digital/analog trigger, SSI bus Trigger modes - Post-trigger, delay-trigger, and repeated trigger FIFO buffer size - 1 k samples Data transfers - Programmed I/O, scatter-gather DMA Number of channels 24-CH 8255 programmable input/output Compatibility 5 V/TTL Data transfers Programmed I/O Number of channels 2 Resolution 16 Bit Compatibility 5 V/TTL Base clock available 40 MHz, external clock up to 10 MHz Auto Calibration Yes (+5 V, ±2 ppm/˚C) Dimensions 175 mm x 107 mm (6.82" x 4.17") (not including connectors) (DAQ-2213/2214) 168 mm x 107 mm (6.55” x 4.17") (not including connectors) (DAQe-2213/2214) Connector 68-pin VHDCI female x 2 Operating temperature 0˚C to 55˚C (32˚F to 131˚F) Storage temperature -20˚C to 70˚C (-4˚F to 158˚F) Humidity 5 to 95%, non-condensing Power requirements +5 V 1.2 A typical (DAQ-2213) +3.3 V 0.84 A, +12 V 0.604 A typical (DAQe-2213) +5 V 1.2 A typical (DAQ-2214) +3.3 V 0.77 A, +12 V 0.572 A typical (DAQe-2214) Analog Input Analog Output Digital I/O General-Purpose Timer/Counter General Specifications 3-25 www.adlinktech.com