DA4 EMERSON-NETWORKPOWER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Rev. 10.01.08_124 DA4 Series 1 of 3 Embedded Power for Business-Critical Continuity DA4 Series

4 Watts

  • Switching wallmount power supply
  • Available in multiple AC plug configurations
  • CE Mark EMC & LVD
  • Universal AC input
  • Regulated output
  • Overload and short circuit protection
  • Constant voltage, constant current
  • High MTBF
  • Built in EMI filter (CISPR 22 Class B)
  • LED power good indicator Total Power: 4 Watts Input Voltage: 90-264 VAC # of Outputs: Single Electrical Specifications Safety Input Input range 90-264 VAC (wide range) Frequency 47-63 Hz EMI/RFI FCC Part 15, Subpart B Class B & EN55022 (CISPR 22) Class B &EMC89/336/EEC Safety ground leakage current 100 µA @ 50/60 Hz, 230 VAC input Output Voltage (Vo) 5.5V (5.0V - 6.0V) Maximum Power (Po) 4W Hold-up time 15 ms. typical at full load @ 115 VAC Overvoltage protection 25% above nominal output maximum Latching type Overload protection Output short circuit protection auto recover Overload protected > 800mA Output cable/ connector barrel polarity DC cable with 2.5 mm x 5.5 mm barrel plug DC plug center +V; DC plug outer -V Reverse polarity -0001 suffix DC plug center -V; DC plug outer +V Operating temperature: 0° to 50°C ambient Storage temperature: -40°C to +85°C Electromagnetic susceptibility: Designed to meet EN55082-1 Humidity: Operating; non-condensing 20% to 90% RH Vibration: Per IEC 60068-2-6 Environmental Specifications UL 60950 / 6500 CSA 60950 TUV 60950 NEMKO 60950 CB Certificate and report CE EMC & LVD CCC Mark DA4-050CH DA4-050US DA4-050EU RoHS

1.80" (45.8) 2.36" (60.0) 1.57" (39.8) 1.02" (26.0) 78.7" (2000.0) Rev.10.01.08_124 DA4 Series 2 of 3 Embedded Power for Business-Critical Continuity

Ordering Information

P/P (PARD)1 DA4-050US 4W 5.5V 0 0.75A 0.80A 150mV DA4-050EU 4W 5.5V 0 0.75A 0.80A 150mV DA4-050CH 4W 5.5V 0 0.75A 0.80A 150mV 1. Peak-to-peak with 1 MHz bandwidth and 10 µF (tantalum capacitor) in parallel with a 0.1 µF capacitor at rated line volt- age and load ranges. 2. Output should not be crounded for EMI purpose. 3. Add -0001 suffix to the part number for reverse polarity, for example DA4-050US-0001. Mechanical Drawing DA4-050US 1.57" (39.8)1.02" (26.0) 2.23" (58.3) 2.36" (60.0) CASE BOTTOM CASE TOP 78.7" (2000.0) DA4-050EU

Rev. 10.01.08_124 DA4 Series 3 of 3 Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. ©2007 Emerson Electric Co. Embedded Power for Business-Critical Continuity Emerson Network Power. The global leader in enabling business-critical continuity. EmersonNetworkPower.com AC Power Connectivity DC Power Embedded Power Inbound Power Integrated Cabinet Solutions Outside Plant Precision Cooling Site Monitoring and Services Mechanical Drawing Americas

5810 Van Allen Way

Carlsbad, CA 92008 USA Telephone: +1 760 930 4600 Facsimile: +1 760 930 0698 Europe (UK) Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom Telephone: +44 (0) 1384 842 211 Facsimile: +44 (0) 1384 843 355 Asia (HK) 16th - 17th Floors, Lu Plaza

2 Wing Yip Street, Kwun Tong

Kowloon, Hong Kong Telephone: +852 2176 3333 Facsimile: +852 2176 3888 For global contact, visit: www.astecpower.com www.artesyn.com technicalsupport@astec.com technicalsupport@artesyn.com While every precaution has been taken to ensure accuracy and completeness in this literature, Emerson Network Power assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. Notes: 1. Specifications subject to change without notice. 2. all dimensions in inches (mm), tolerance is ±.02”­ 3. Warranty: 2 year CASE BOTTOM CASE TOP 1.57" (39.8) 1.02" (26.0) 1.80" (45.8) 2.36" (60.0) 78.7" (2000.0) DA4-050CH