DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Subject to change without notice. www.cree.com

FEATURES

  • Rectangular LED RF Performance – 450 & 460 nm – 33 mW min – 470 – 30 mW min
  • High Reliability - Eutectic Attach
  • Low Forward Voltage (Vf) – 3.1 V Typical at 20 mA
  • Maximum DC Forward Current – 100 mA
  • 1000-V ESD Threshold Rating
  • InGaN Junction-Down Design for Improved Thermal Management
  • No Wire Bonds Required
  • Excellent Performance over Temperature

APPLICATIONS

  • Large LCD Backlighting – Television
  • General Illumination
  • Medium LCD Backlighting – Portable PCs – Monitors
  • LED Video Displays
  • White LEDs Direct Attach DA2432™ LEDs CxxxDA2432-Sxxx00-2 Data Sheet Cree’s Direct Attach DA2432 LEDs are the next generation of solid-state LED emitters that combine highly efficient InGaN materials with Cree’s proprietary device technology and silicon-carbide substrates to deliver superior value for the TV-backlighting and general-illumination markets. The DA2432 LEDs are among the brightest in the top-view market while delivering a low forward voltage, resulting in a very bright and highly efficient solution. The bondpad- down design allows for eutectic die attach, eliminating the need for wire bonds, and enables superior performance from improved thermal management. The design is optimally suited for industry-standard top-view packages. CxxxDA2432-Sxxx00-2 Chip Diagram Dat a Sheet: CPR3FM Rev - 240 x 320 µm Thickness 140 µm Top View Bottom View Anode (+) 170 x 60 µm Gap 60 µm Cathode (-) 145 x 105 µm Side View

Copyright © 2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks, and DA and DA2432 are trademarks of Cree, Inc. CPR3FM Rev - Cree, Inc.

4600 Silicon Drive

Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com Maximum Ratings at TA = 25°C Notes 1,3, & 4 CxxxDA2432-Sxxx00-2 DC Forward Current 100 mA Peak Forward Current (1/10 duty cycle @ 1 kHz) 150 mA LED Junction Temperature 150°C Reverse Voltage 5 V Operating Temperature Range -40°C to +100°C Storage Temperature Range -40°C to +100°C Electrostatic Discharge Threshold (HBM) Note 2 1000 V Electrostatic Discharge Classification (MIL-STD-883E) Note 2 Class 2 Typical Electrical/Optical Characteristics at TA = 25°C, If = 20 mA Note 3 Part Number Forward Voltage (Vf, V) Reverse Current [I(Vr=5V), μA] Full Width Half Max (λD, nm) C450DA2432-Sxxx00-2 2.8 3.1 3.4 2 20 C460DA2432-Sxxx00-2 2.8 3.1 3.4 2 21 C470DA2432-Sxxx00-2 2.8 3.1 3.4 2 21 Mechanical Specifications CxxxDA2432-Sxxx00-2 Description Dimension Tolerance P-N Junction Area (μm) 210 x 280 ±35 Chip Bottom Area (μm) 240 x 320 ±35 Chip Top Area (μm) 110 x 190 ±35 Chip Thickness (μm) 140 ±15 Bond Pad Width – Anode (um) 60 ±15 Bond Pad Length – Anode (um) 170 ±35 Bond Pad Width – Cathode (um) 105 ±35 Bond Pad Length – Cathode (um) 145 ±35 Bond Pad Gap (μm) 60 ±15 Bond Pad Thickness (μm) 3 ±0.5 Notes: 1. Maximum ratings are package-dependent. The above ratings were determined using a chip sub-mount on MCPCB (with silicone encapsulation and flux eutectic die attach) for characterization. Ratings for other packages may differ. Junction temperature should be characterized in a specific package to determine limitations. Assembly processing temperature must not exceed 325°C (< 5 seconds). 2. Product resistance to electrostatic discharge (ESD) according to the HBM is measured by simulating ESD using a rapid avalanche energy test (RAET). The RAET procedures are designed to approximate the maximum ESD ratings shown. 3. All products conform to the listed minimum and maximum specifications for electrical and optical characteristics when assembled and operated at 50 mA within the maximum ratings shown above. Efficiency decreases at higher currents. Typical values given are within the range of average values expected by manufacturer in large quantities and are provided for information only. All measurements are based on a thru-hole package (with Hysol OS4000 encapsulant and flux eutectic die attach). Optical characteristics are measured in an integrating sphere using Illuminance E. 4. The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is crucial for the end-product to be designed in a manner that minimizes the thermal resistance from the LED junction to ambient in order to optimize product performance. 100 120 140 160 50 75 100 125 150 175 Maximum Forward Current (mA) Ambient Temperature (C) Rth j-a = 10 C/W Rth j-a = 20 C/W Rth j-a = 30 C/W Rth j-a = 40 C/W

Copyright © 2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks, and DA and DA2432 are trademarks of Cree, Inc. CPR3FM Rev - Cree, Inc. Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com Standard Bins for CxxxDA2432-Sxxx00-2 LED chips are sorted to the radiant flux and dominant wavelength bins shown. A sorted die sheet contains die from only one bin. Sorted die kit (CxxxDA2432-Sxxxxx-2) orders may be filled with any or all bins (CxxxDA2432-xxxxx-2) contained in the kit. All radiant flux and dominant wavelength values shown and specified are at If = 20 mA. C450DA2432-S3300-2 C450DA2432-0713-2 C450DA2432-0714-2 C450DA2432-0715-2 C450DA2432-0716-2 C450DA2432-0709-2 C450DA2432-0710-2 C450DA2432-0711-2 C450DA2432-0712-2 C450DA2432-0705-2 C450DA2432-0706-2 C450DA2432-0707-2 C450DA2432-0708-2 447.5 450 452.5445 455 Radiant Flux (mW) Dominant Wavelength (nm) C460DA2432-S3300 C460DA2432-0713-2 C460DA2432-0714-2 C460DA2432-0715-2 C460DA2432-0716-2 C460DA2432-0709-2 C460DA2432-0710-2 C460DA2432-0711-2 C460DA2432-0712-2 C460DA2432-0705-2 C460DA2432-0706-2 C460DA2432-0707-2 C460DA2432-0708-2 Dominant Wavelength (nm) 457.5 460 462.5455 465 Radiant Flux (mW) C470DA2432-S3000-2 C470DA2432-0713-2 C470DA2432-0714-2 C470DA2432-0715-2 C470DA2432-0716-2 C470DA2432-0709-2 C470DA2432-0710-2 C470DA2432-0711-2 C470DA2432-0712-2 C470DA2432-0705-2 C470DA2432-0706-2 C470DA2432-0707-2 C470DA2432-0708-2 C470DA2432-0701-2 C470DA2432-0702-2 C470DA2432-0703-2 C470DA2432-0704-2 Dominant Wavelength (nm) 467.5 470 472.5465 475 Radiant Flux (mW)

Copyright © 2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks, and DA and DA2432 are trademarks of Cree, Inc. CPR3FM Rev - Cree, Inc. Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com Characteristic Curves These are representative measurements for the DA LED product. Actual curves will vary slightly for the various radiant flux and dominant wavelength bins. 100 150 0 1 2 3 4 5 If (mA) Vf (V) Forward Current vs. Forward Voltage 100 350 400 450 500 550 600 Relative Intensity Wavelength (nm) Relative Intensity vs. Wavelength 100% 200% 300% 400% 500% 600% 0 25 50 75 100 125 150 Relative Light Intensity If (mA) Relative Intensity vs. Forward Current 100 125 150 2 3 4 5 If (mA) Vf (V) Forward Current vs. Forward Voltage 0 25 50 75 100 125 150 Dominant Wavelength Shift (nm) If (mA) Wavelength Shift vs. Forward Current

Copyright © 2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks, and DA and DA2432 are trademarks of Cree, Inc. CPR3FM Rev - Cree, Inc. Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com Radiation Pattern This is a representative radiation pattern for the DA LED product. Actual patterns will vary slightly for each chip.