DA01S DELTA | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
1W DC/DC CONVE RTER, D IP-Package, High Isolation DS_DA01S_03152012 E-mail: DCDC@delta.com.tw http://www.delta.com.tw/dcdc
FEATURES
Efficiency up to 79% DIP Package with Industry Standard Pinout High Isolation Voltage 3000VDC Temperature Performance-40℃ to +75℃ > 2MHours MTBF Internal SMD platform Lead free, RoHs Compliant 12 Standard Models 3 Years Product Warranty The DA01S series are miniature, DIP Package, isolated 1W DC/DC converters with 3,000VDC isolation. It allows a wide operating temperature range of –40°C to +75°C. These isolated DC/DC converters are the latest offering from a world leader in power systems technology and manufacturing ― Delta Electronics, Inc. With creative design technology and optimization of component placement, these converters possess outstanding electrical and thermal performance, as well as extremely high reliability under highly stressful operating conditions. Model List Output Current Input Current Efficiency (typ.) Input Voltage (Range) Output Voltage Max. Min. @Max. Load @No Load Load Regulation Max. apacitive Load @Max. Load Model Number VDC VDC mA mA mA(typ.) mA(typ.) % (max.) uF % DA01S0505A 5 200 4 290 11 69 DA01S0509A 9 110 2 260 8 76 DA01S0512A 12 84 1.5 262 7 77 DA01S0515A (4.5 ~ 5.5) 15 67 1 257 DA01S1205A 5 200 4 117 9 71 DA01S1209A 9 110 2 107 5 77 DA01S1212A 12 84 1.5 106 5 79 DA01S1215A (10.8 ~ 13.2) 15 67 1 106 DA01S2405A 5 200 4 60 8 70 DA01S2409A 9 110 2 54 5 76 DA01S2412A 12 84 1.5 53 4 79 DA01S2415A (21.6 ~ 26.4) 15 67 1 53 Input Characteristics Parameter Model Min. Typ. Max. Unit 5V Input Models 4.5 5 5.5 12V Input Models 10.8 12 13.2Input Voltage Range 24V Input Models 21.6 24 26.4 5V Input Models -0.7 --- 7 12V Input Models -0.7 --- 15Input Surge Voltage (1 sec. max.) 24V Input Models -0.7 --- 28 VDC Reverse Polarity Input Current --- --- 0.3 A Input Filter Internal Capacitor Internal Power Dissipation All Models --- --- 450 mW
DS_DA01S_03152012 E-mail: DCDC@delta.com.tw http://www.delta.com.tw/dcdc Output Characteristics Parameter Conditions Min. Typ. Max. Unit Output Voltage Accuracy --- ±1.0 ±3.0 % Line Regulation For Vin Change of 1% --- ±1.2 ±1.5 % Load Regulation Io=20% to 100% +-11% max Ripple & Noise (20MHz) --- 100 150 mV P-P Ripple & Noise (20MHz) Over Line, Load & Temp. --- --- 200 mV P-P Ripple & Noise (20MHz) --- --- 15 mV rms Temperature Coefficient --- ±0.01 ±0.02 %/℃ Short Circuit Protection 0.5 Second Max. General Characteristics Parameter Conditions Min. Typ. Max. Unit I/O Isolation Voltage (rated) 60 Seconds 3000 --- --- VDC I/O Isolation Resistance 500 VDC 10 --- --- GΩ I/O Isolation Capacitance 100KHz, 1V --- 60 100 pF Switching Frequency 50 90 110 KHz MTBF (calculated) MIL-HDBK-217F@25℃, Ground Benign 2,000,000 --- --- Hours Recommended Input Fuse 5V Input Models 12V Input Models 24V Input Models 500mA Slow-Blow Type 200mA Slow-Blow Type 100mA Slow-Blow Type Environmental Characteristics Parameter Conditions Min. Max. Unit Operating Temperature Range (with Derating) Ambient -40 +85 ℃ Case Temperature --- +90 ℃ Storage Temperature Range -50 +125 ℃ Humidity (non condensing) --- 95 % rel. H Cooling Free-Air convection Lead Temperature (1.5mm from case for 10Sec.) --- 260 ℃ Power Derating Curve Output Power (%) Output Power (%) (5V Output Only) (All Other Output) Notes 1 Specifications typical at Ta=+25℃, resistive load, nominal input voltage and rated output current unless otherwise noted. 2 Ripple & Noise measurement bandwidth is 0-20MHz. 3 These power converters require a minimum output loading to maintain specified regulation,operation under no-load conditions will not damage these modules; however they may not meet all specifications listed. 4 All DC/DC converters should be externally fused at the front end for protection. 5 Specifications subject to change without notice.
DS_DA01S_03152012 E-mail: DCDC@delta.com.tw http://www.delta.com.tw/dcdc Package Specifications Mechanical Dimensions Pin Connections Pin Function 1 -Vin 4 +Vin 5 +Vout 7 -Vout L=7.0 [0.28] for 5V & 12V Input Models L=8.0 [0.31] for 24V Input Models ►All dimensions in mm (inches) ►Tolerance: X.X±0.25 (X.XX±0.01) X.XX±0.13 ( X.XXX±0.005) ►Pin diameter ⇔ 0.5 ±0.05 (0.02±0.002) Physical Characteristics Case Size Case Material : Non-Conductive Black Plastic (flammability to UL 94V-0 rated) Weight(5V&12V Input) : 1.3g Weight(24V Input) : 1.7g 1 4 7 5 Bottom View L3.1 [0.12] 0.4 [0.02] 5.08 [0.20] 2.54 [0.10] 2.6 [0.10] 7.62 [0.30] 10.2 [0.40] 1.29 [0.05] 12.7 [0.50] 7.62 [0.30] 0.50 [0.02]
DS_DA01S_03152012 E-mail: DCDC@delta.com.tw http://www.delta.com.tw/dcdc Part Numbering System D A 01 S 05 05 A Form factor Family series Watt Number of Outputs Input Voltage Output Voltage Option Code D-DIP A~Z 01:1W S - Single 03:3.3V 03:3.3V A - Std. Functions P-SIP 02:2W D- Dual 05: 5V 05: 5V S-SMD 03:3W 12:12V 12:12V 04:4W 24: 24V 15: 15V 06:6W 48:48V 24: 24V WARRANTY Delta offers a three(3) years limited warranty. Complete warranty information is listed on our web siteor is available upon request from Delta. Information furnished by Delta is believed to be accurate and reliable. However, no responsibility is assumed by Delta for its use, nor for any infringements of patents or other rights of third parties, which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Delta. Delta reserves the right to revise these specifications at any time, without notice.