D6011 GMI | Alldatasheet
Document overview
- PDF pages: 2
Technical content
www.gminternational.com D6011 SIL3 2-Wire HART® Transmitter Power Supply Isolators > Analog Input
ORDERING INFORMATION
D6011S: 1 channel D6011D: 2 channels Accessories Bus Connector JDFT049, Bus Mounting Kit OPT5096. TECHNICAL DATA SIL 3 / SC 3 4-20 mA Passive Input, Source Output HART® compatible Input and Output short circuit proof High Accuracy Three port isolation, Input/Output/Supply High Density, two channels per unit The Repeater Power Supply D6011 module is a high integrity analog input interface suitable for applications requiring SIL 3 level in safety related systems for high risk industries. It provides a fully floating dc supply for energizing conventional 2 wires 4-20 mA transmitters, and repeats the current in floating circuit to drive a load. The circuit allows bi-directional communication signals, for HART® devices.
FEATURES
24 Vdc nom (18 to 30 Vdc), reverse polarity protected. Current consumption: 90 mA (D6011D), 45 mA (D6011S), @ 24 Vdc with 20 mA output, typical. Power dissipation: 1.35 W (D6011D), 0.675 W (D6011S), @ 24 Vdc with 20 mA output, typical. Input 4 to 20 mA (2 wires Tx current limited ≈ 25 mA), reading range 0 to 24 mA. Transmitter line voltage: 15.0 V typical, 14.5 V minimum, @ 20 mA. Output 4 to 20 mA, on max. 550 Ω load in source mode (typical 12 V compliance). Response time: 5 ms (0 to 100 % step change). Performance Ref. Conditions: 24 V supply, 250 Ω load, 23 ± 1 °C ambient temperature. Calibration accuracy: ≤ ± 0.1 % FSR. Linearity accuracy: ≤ ± 0.05 % FSR. Temp. influence: ≤ ± 0.01 % FSR on zero/span for a 1 °C change. Isolation In/Out 2.5 kV; In/Supply 2.5 kV; In/In 500 V; Out/Supply 500 V; Out/Out 500 V. Environmental conditions Operating temperature: temperature limits –40 to +70 °C. Storage temperature: temperature limits –45 to +80 °C. Mounting DIN-Rail 35 mm, with or without Power Bus or on custom Term. Board. Weight: about 140 g (D6011D), 125 g (D6011S). Connection: by polarized plug-in disconnect screw terminal blocks to accommodate terminations up to 2.5 mm² (13 AWG). Dimensions: Width 12.5 mm, Depth 123 mm, Height 120 mm. OVERALL DIMENSIONS Functional Safety Management Certification: GM International is certified to conform to IEC61508:2010 part 1 clauses 5-6 for safety related systems up to and included SIL3. In addition, GM International products have been granted I.S. certificates from the most credited Notified Bodies in the world. Data specified in this document are merely descriptive of the products and should be integrated with relevant technical specifications. Our products are in constant development and the information presented herein refers to the time of document issue. No statements concerning a certain condition or suitability for a certain application can be derived from our information. The information given does not release the user from the obligation of own judgment and verification. Terms & Conditions can be found at our website. For more information refer to istruction manual.
Additional installation diagrams may be found in Instruction Manual. Field Safe Area Functional Safety Management Certification: GM International is certified to conform to IEC61508:2010 part 1 clauses 5-6 for safety related systems up to and included SIL3. In addition, GM International products have been granted I.S. certificates from the most credited Notified Bodies in the world. Data specified in this document are merely descriptive of the products and should be integrated with relevant technical specifications. Our products are in constant development and the information presented herein refers to the time of document issue. No statements concerning a certain condition or suitability for a certain application can be derived from our information. The information given does not release the user from the obligation of own judgment and verification. Terms & Conditions can be found at our website. For more information refer to istruction manual.