FAR-D6NF-1G9600-P1BZ-Z TAIYO-YUDEN | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 11
Technical content
Notice for TAIYO YUDEN products Please read this notice before using the TAIYO YUDEN products. REMINDERS ˙ Product information in this catalog is as of October 2014. All of the contents specified herein are subject to change without notice due to technical improvements, etc. Therefore, please check for the latest information carefully be- fore practical application or usage of the Products. Please note that TAIYO YUDEN CO., LTD. shall not be responsible for any defects in products or equipm ent incor- porating such products, which are caused under the conditions other than those specified in this catalog or indi- vidual specification. ˙ Please contact TAIYO YUDEN CO., LTD. for further details of product specifications as the individual specification is available. ˙ Please conduct validation and verification of products in actual condition of mounting and operating environment before commercia l shipment of the equipment. ˙ All electronic components or functional modules listed in this catalog are developed, designed and intended for use in general electronics equipment.(for AV, office automation, household, office supply, information service, telecommunications, (such as mobile phone or PC) etc.). Before incorporating the components or devices into any equipment in the field such as tran sportation,( automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network (telephone exchange, base station) etc. which may have direct influence to harm or injure a human body, please contact TAIYO YUDEN CO., LTD. for more detail in ad- vance. Do not incorporate the products into any equipment in fields such as aerospace, aviation , nuclear control, subma- rine system, military, etc. where higher safety and reliability are especially required. In addition, even electronic components or functional modules that are used for the general electronic equipment, if the equipment or the electric circuit require high safety or reliability function or performances, a sufficient reliabil- ity evaluation check for safety shall be performe d bef ore commercial shipment and moreover, due consideration to install a protective circuit is strongly recommended at customer's design stage. ˙ The contents of this catalog are applicable to the products which are purchased from our sales offices or distribu- tors (so called ʠTAIYO YUDENʟs official sales channel ʡ). It is only applicable to the products purchased from any of TAIYO YUDEN ʟ s official sales channel. ˙ Please note that TAIYO YUDEN CO., LTD. shall have no responsibility for any controversies or disputes that may occur in connection with a third party's intellectual property rights and other related rights arising from your usage of products in this catalog. TAIYO YUDEN CO., LTD. grants no license for such rights. ˙ Caution for export Certain items in this catalog may require specifi c procedures for export according to ʠForeign Exchange and For- eign Trade Control Law ʡ of Japan, ʠU.S. Export Administration Regulations ʡ, and other applicable regulations. Should you have any question or inquiry on this matter, please contact our sales staff.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) SAW/FBAR DEVICES for MOBILE COMMUNICATIONS REFLOW ˙ ORDERING CODE ˎFor further details, please contact to TAIYO YUDEN Co.,Ltd. ❶Series Product Frequency Range D5 Duplexer 700-1000MHz D6 Duplexer 1000-5000MHz J5 Dual Duplexer͂ 700-1000MHz F5 Device 700-1000MHz F6 Device 1000-5000MHz G5 Dual Devices 700-1000MHz G6 Dual Devices 1000-5000MHz ❷Package type ❸Product type ❹Frequency ❺Design ❻Serial Number ❽Packing ❼Custom ˙ EXTERNAL DIMENSIONS/STANDARD QUANTITY Unitɿmm UnitɿmmUnitɿmm Unitɿmm Unitɿmm UnitɿmmUnitɿmm Unitɿmm ❿Serial Number❽Common sign ʵ Fixation ❷Common sign ʵ Fixation ❶Family ❸Series Product Frequency Range D5 Duplexer 700-1000MHz D6 Duplexer 1000-5000MHz J5 Dual Duplexer͂ 700-1000MHz F5 Device 700-1000MHz F6 Device 1000-5000MHz G5 Dual Devices 700-1000MHz G6 Dual Devices 1000-5000MHz ❼Frequency ❾Design ⓫Custom, Status ⓬Packing ❻Common sign ʵ Fixation ❹Package type ❺Product type ❼Frequency 136 2.5ʶ0.1 index 2.0ʶ0.1 0.6max C0.15 4-0.9625 8-0.425 4-0.7375 8-0.375 2.5ʶ0.1 index 2.0ʶ0.1 0.65max C0.15 4-0.9625 2-0.3 8-0.425 4-0.7375 8-0.375 0.9ʷ0.375 2.5ʶ0.1 index 2.0ʶ0.1 0.6max C0.15 4-0.9625 2-0.3 8-0.425 4-0.7375 8-0.375 0.9ʷ0.375 2.0ʶ0.1 index 1.6ʶ0.1 0.5max C0.15 4-0.775 2-0.325 8-0.30 4-0.575 8-0.30 0.60ʷ0.30 1.40ʶ0.1 index 1.00ʶ0.1 0.325 0.325 0.5max 0.50 0.50 0.25 0.575 0.25 0.25 1.10ʶ0.1 index 0.90ʶ0.1 0.25 0.5max 0.40 0.40 0.2 0.5 0.25 0.20 0.25 1.80ʶ0.1 index 1.40ʶ0.1 0.5max 1.41 0.47 0.600.60 0.24 0.23 1.00 0.25 0.25 0.25 1.50ʶ0.1 index 1.10ʶ0.1 0.5max 1.17 0.39 0.490.39 0.18 0.21 0.78 0.18 0.21 0.18 F A R ʵ D 6 N F ʵ 1 G 9 6 0 0 ʵ P 1 B Z ʵ Z ❶ ❷ ❸ ❹ ❺ ❻ ❼ ❽ ❾ ❿ ⓫ ⓬ D 6 N F 1 G 9 6 0 P 1 B Z ʵ Z ❶ ❷ ❸ ❹ ❺ ❻ ❼ ❽ ʢAʣPrevious Rule (applied to products registered on March 31, 2010 or before.) ʢBʣNew Rule (applied to products registered on April 1, 2010 or later.)
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) ˙ PART NUMBERS 137 System Part number Package Size ʢmmʣ Insertion Loss ʢdBʣ Isolation ʢdBʣ Remarks PCS/W-CDMA Band 2 CDMA/W-CDMA Band 5 FAR-D5PF-881M50-M3E9 2 W-CDMA Band 8 LTE Band 17 LTE Band 28 ˔Duplexers System Part number Package Size ʢmmʣ Insertion Loss ʢdBʣ Attenuation ʢdBʣ Remarks CDMA Tx FAR-F5KB-836M50-B4ER 1.4ʷ1.0ʷ0.5 1.7 44 100ohm input FAR-F5KB-836M50-B4EG 1.4ʷ1.0ʷ0.5 1.6 42 200ohm input CDMA/W-CDMA Band 5 Rx FAR-F5KB-881M50-B4ED 1.4ʷ1.0ʷ0.5 1.5 61 100ohm output FAR-F5KB-881M50-B4EJ 1.4ʷ1.0ʷ0.5 1.4 64 200ohm output FAR-F5QB-881M50-P2BG 1.1ʷ0.9ʷ0.5 1.5 60 100ohm output FAR-F5QA-881M50-M2AF 1.1ʷ0.9ʷ0.5 1.6 46 - GSM850 Rx FAR-F5KB-881M50-B4EA 1.4ʷ1.0ʷ0.5 1.7 53 150ohm output FAR-F5QB-881M50-P2BA 1.1ʷ0.9ʷ0.5 1.3 63 150ohm output System Part number Package Size ʢmmʣ Insertion Loss ʢdBʣ Attenuation ʢdBʣ Remarks EGSM Tx F5QA897M5M2AC 1.1ʷ0.9ʷ0.5 2.3 18 ʵ EGSM Rx FAR-F5KB-942M50-B4EB 1.4ʷ1.0ʷ0.5 1.6 26 150ohm output FAR-F5KB-942M50-B4ES 1.4ʷ1.0ʷ0.5 2.4 29 100ohm output FAR-F5QB-942M50-P2BB 1.1ʷ0.9ʷ0.5 1.6 28 150ohm outp ut W-CDMA/LTE Band 8 System Part number Package Size ʢmmʣ Insertion Loss ʢdBʣ Attenuation ʢdBʣ Remarks F5KA833M0D4MG 1.4ʷ1.0ʷ0.5 1.4 20 Low IL CDMA2000 BC0+10 Rx F5KY878M0B4ND 1.4ʷ1.0ʷ0.5 2.1 53 100ohm output ˔CDMA2000 BC0+BC10 ˔CDMA/GSM850/Band 5 ˔GSM/EGSM/Band 8
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) ˙ PART NUMBERS 138 ˔GSM Dual ˔GPS ˔PCS/GSM1900/Band 2 ˔DCS/Band 3 System Part number Package Size ʢmmʣ Insertion Loss ʢdBʣ Attenuation ʢdBʣ Remarks GSM850ʴEGSM Rx GSM850+EGSM Rx EGSMʴGSM850 Rx ʢCommon Input ʣ DCSʴGSM1900 Rx DCSʴGSM1900 Rx GSM1900ʴDCS Rx GSM1900ʴDCS Rx ʢCommon Output ʣ System Part number Package Size ʢmmʣ Insertion Loss ʢdBʣ Attenuation ʢdBʣ Remarks GPS FAR-F6KB-1G5754-B4GE 1.4ʷ1.0ʷ0.5 1.1 ʵ 100ohm, Low loss GPS/GNSS GPS+GLONASS ʴGalileo ʴCompass F6KA1G581D4JR 1.4ʷ1.0ʷ0.5 1.6 ʵ System Part number Package Size ʢmmʣ Insertion Loss ʢdBʣ Attenuation ʢdBʣ Remarks US-PCS Tx FAR-F6KB-1G8800-B4GS 1.4ʷ1.0ʷ0.5 2.3 28 100ohm input F6QA1G880M2AQ 1.1ʷ0.9ʷ0.5 1.7 20 US-PCS Rx FAR-F6KB-1G9600-B4GP 1.4ʷ1.0ʷ0.5 2.1 23 100ohm output F6KY1G960B4NF 1.4ʷ1.0ʷ0.5 2.8 50 100ohm output F6QG1G960P2KT 1.1ʷ0.9ʷ0.5 2.8 44 100ohm output GSM1900/US-PCS Rx FAR-F6KA-1G9600-D4CR 1.4ʷ1.0ʷ0.5 2.0 18 GSM1900 Rx FAR-F6KB-1G9600-B4GB 1.4ʷ1.0ʷ0.5 1.6 18 150ohm output F6QB1G960P2BK 1.1ʷ0.9ʷ0.5 1.5 15 150ohm output System Part number Package Size ʢmmʣ Insertion Loss ʢdBʣ Attenuation ʢdBʣ Remarks DCS Tx FAR-F6KA-1G7475-D4CY 1.4ʷ1.0ʷ0.5 2.5 30 F6QA1G747M2QS 1.1ʷ0.9ʷ0.5 2.1 22 DCS Rx FAR-F6KA-1G8425-D4CK 1.4ʷ1.0ʷ0.5 2.1 20 FAR-F6KB-1G8425-B4GA 1.4ʷ1.0ʷ0.5 1.5 14 150ohm output F6QB1G842P2BM 1.1ʷ0.9ʷ0.5 1.8 15 100ohm F6QB1G842P2BF 1.1ʷ0.9ʷ0.5 1.6 17 150ohm
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) ˙ PART NUMBERS 139 System Part number Package Size ʢmmʣ Insertion Loss ʢdBʣ Attenuation ʢdBʣ Remarks W-CDMA Band 1 Tx FAR-F6KB-1G9500-B4GJ 1.4ʷ1.0ʷ0.5 2.1 34 100ohm output W-CDMA Band 1 Rx FAR-F6KA-2G1400-D4CG 1.4ʷ1.0ʷ0.5 1.9 39 FAR-F6KB-2G1400-B4GC 1.4ʷ1.0ʷ0.5 1.7 39 100ohm output W-CDMA Band 4 Tx FAR-F6KA-1G7400-D4DE 1.4ʷ1.0ʷ0.5 1.5 44 W-CDMA Band 5+8 Rx G5QH942M5N2LN 1.5ʷ1.1ʷ0.5 1.6/20 56/50 100ohm output W-CDMA Band 8+5 Rx W-CDMA Band 7 Tx F6KA2G535L4AM 1.4ʷ1.0ʷ0.5 1.6 30 W-CDMA Band 9 Rx FAR-F6KB-1G8625-B4GT 1.4ʷ1.0ʷ0.5 2.1 40 100ohm output LTE Band 12 Rx F5KY737M0B4NN 1.4ʷ1.0ʷ0.5 1.4 57 100ohm output LTE Band 13 Tx FAR-F5KA-782M00-D4VP 1.4ʷ1.0ʷ0.5 1.5 55 LTE Band 13 Rx FAR-F5KY-751M00-B4UQ 1.4ʷ1.0ʷ0.5 1.6 50 100ohm output LTE Band 17 Tx FAR-F5KA-710M00-D4VQ 1.4ʷ1.0ʷ0.5 1.2 32 LTE Band 17 Rx FAR-F5KY-740M00-B4UR 1.4ʷ1.0ʷ0.5 1.4 60 100ohm output F5QG740M0P2KH 1.1ʷ0.9ʷ0.5 1.4 65 100ohm output LTE Band 20 Tx F5KA847M0D4ML 1.4ʷ1.0ʷ0.5 1.7 52 LTE Band 20 Rx F5KY806M0B4NE 1.4ʷ1.0ʷ0.5 2.5 45 100ohm output LTE Band 21 Rx F6KY1G503B4NS 1.4ʷ1.0ʷ0.5 1.4 47 100ohm output Low loss LTE Band 26 Rx F5QG876M5P2KQ 1.1ʷ0.9ʷ0.5 2.2 59 100ohm output LTE Band 28 Rx F5QA773M0M2QC 1.1ʷ0.9ʷ0.5 2.1 52 Block A F5QA788M0M2QB 1.1ʷ0.9ʷ0.5 2.0 52 Block B TD LTE Bnad 38 Rx F6KB2G595B4HS 1.4ʷ1.0ʷ0.5 2.6 ʵ 150ohm output TD LTE Band 38ʴ40 TD LTE Band 40 Rx F6KB2G350B4HT 1.4ʷ1.0ʷ0.5 2.7 ʵ 150ohm output F6KB2G350B4HTB 1.4ʷ1.0ʷ0.5 2. 5 ʵ Balanced 100ohm System Part number Package Size ʢmmʣ Insertion Loss ʢdBʣ Attenuation ʢdBʣ Remarks TD-SCDMA/TD-LTE Band 34 FAR-F6KA-2G0175-D4DR 1.4ʷ1.0ʷ0.5 1.8 ʵ High Att TD-SCDMA/TD-LTE Band 39 FAR-F6KA-1G9000-D4DS 1.4ʷ1.0ʷ0.5 1.6 ʵ TD-SCDMA Band 39 ʴ34 TD-SCDMA Band 34 ʴ39 Wireless LAN FAR-F6KA-2G4418-D4CU 1.4ʷ1.0ʷ0.5 2.6 ʵ ʴ10dBm FAR-F6KA-2G4418-A4VA 1.4ʷ1.0ʷ0.5 3.0 ʵ ʴ23dBm FAR-F6KA-2G4500-A4VD 1.4ʷ1.0ʷ0.5 1.9 ʵ Low IL,ʴ19dBm F6KA2G436A4VE 1.4ʷ1.0ʷ0.5 2.5 ʵ BW=72MHz,ʴ24dBm F6KA2G466A4VJ 1.4ʷ1.0ʷ0.5 2.8 ʵ BW=68MHz,ʴ24dBm ˔W-CDMA ˔Other
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . sawfilter_pack_e-E02R01 SAW/FBAR DEVICES (FILTER / DUPLEXERS) ■PACKAGING ①Minimum Quantity Type Size（mm） Code & Quantity（Pieces） Duplexer 3.0×2.5 Z 3000 U 10000 2.5×2.0 Z 3000 U 10000 2.0×1.6 Z 3000 Y 15000 Single Filter 2.0×1.6 Z 3000 Y 15000 1.4×1.0 Z 3000 Y 15000 1.1×0.9 J 5000 Y 15000 Dual Filter 2.0×1.6 Z 3000 Y 15000 1.8×1.4 Z 3000 Y 15000 1.5×1.1 J 5000 Y 15000 ②Tape material
- Taping dimensions Type Size（mm） a b c d e f Duplexer Single Filter Dual Filter U n i t ： m m
- Material of Tape（Conductive） Tape : Polystyrene Top cover tape : Polyethylene terephthalate（PET）and Polyethylene ③Top Tape Strength The top tape requires a peel-off force of 0.1 to 1.0N in the direction of the arrow as illustrated below.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . sawfilter_pack_e-E02R01 ④Reel size
- Material of Reel Material : Polystyrene＋Carbon Characteristics : Conform to EIAJ-ET-7200A Color : Black Surface resistance（reference value） :109Ω/sq Max. Code Quantity A B C W1 W2 Unit：mm ⑤Reel label and Reel C-Label sticking and Winding method
- Surface
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . sawfilter_reli_e-E02R01 Filter ■RELIABILITY DATA 1. Terminal stregth Specified Value No damage to be found. Test Methods and Remarks Bending Test. according to IEC60068-2-21(JISC60068-2-21) 2. Mechanical shock Specified Value After testing, me et the specified characteristics at a room temperature. Test Methods and Remarks Apply 14700m/s2 for 0.5ms 5 times for each of 6 directions. according to IEC68-2-27(JISC60068-2-27). 3. Vibration Specified Value After testing, me et the specified characteristics at a room temperature. Test Methods and Remarks With 1.5 mm of whole amplitude at 10 to 55 Hz of frequency, and 98m/s2 of acceleration at 55 to 500Hz, apply a vibration for 2 hours for each of 3 directions, period is 15 minutes(10 to 500 to 10Hz) 4. Drop 1 Specified Value After testing, me et the specified characteristics at a room temperature. Test Methods and Remarks Drop 3 times onto concrete floor from the height of 1.0m. 5. Drop 2 Specified Value After testing, me et the specified characteristics at a room temperature. Test Methods and Remarks Drop with 150g weight 3 times in each 6 direction onto concrete floor from the height of 1.8m. 6. Temperature cycling Specified Value After testing, me et the specified characteristics at a room temperature. Test Methods and Remarks Temp. range －40 to ＋100℃. 500cycle. ７. Static humidity Specified Value After testing, me et the specified characteristics at a room temperature. Test Methods and Remarks ＋85℃, 90% to 95%RH, apply DC5V, 1000hours. 8. High temperature storage life Specified Value After testing, me et the specified characteristics at a room temperature. Test Methods and Remarks ＋100℃, 1000hours. 9. Low temperature storage life Specified Value After testing, me et the specified characteristics at a room temperature. Test Methods and Remarks －40℃, 1000hours.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . sawfilter_reli_e-E02R01 10. Solderbility 1 Specified Value More than 90% of area of terminals to be covered with the solder. A change of the remarkable appearance do not have it. Test Methods and Remarks Lead-free Solder paste, Reflow；Peak temperature 245℃ 11. Solderbility 2 Specified Value More than 90% of area of terminals to be covered with the solder. A change of the remarkable appearance do not have it. Test Methods and Remarks Sn-Pb Solder paste, Reflow；Peak temperature 235℃ 12. Solder heat resistance Specified Value After testing, meet the specified characteristics at a room temperature. A change of the remarkable appearance do not have it. Test Methods and Remarks ◆Recommended temperature profile of reflow soldering Figure shows recommended temperature profile of reflow soldering in the case of lead-free solder alloy Sn3.0Ag0.5Cu. Suitable condition for solder heating is differed depending on composition and manufacturing method. Please contact to solder manufacturer for the details.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . sawfilter_reli_e-E02R01 Duplexer ■RELIABILITY DATA 1. Terminal stregth Specified Value No damage to be found. Test Methods and Remarks Bend width 4mm, hold for 5±1 sec. according to IEC60068-2-21(JISC60068-2-21) 2. Mechanical shock Specified Value After testing, me et the specified characteristics at a room temperature. Test Methods and Remarks Apply 14700m/s2 for 0.5ms 5 times for each of 6 directions. according to IEC68-2-27(JISC60068-2-27). 3. Vibration Specified Value After testing, me et the specified characteristics at a room temperature. Test Methods and Remarks With 1.5 mm of whole amplitude at 10 to 55 Hz of frequency, and 98m/s2 of acceleration at 55 to 500Hz, apply a vibration for 2 hours for each of 3 directions, period is 15 minutes(10 to 500 to 10Hz) 4. Drop 1 Specified Value After testing, me et the specified characteristics at a room temperature. Test Methods and Remarks Drop 3 times onto concrete floor from the height of 1.0m. 5. Drop 2 Specified Value After testing, me et the specified characteristics at a room temperature. Test Methods and Remarks Drop with 150g weight 3 times in each 6 direction onto concrete floor from the height of 1.8m. 6. Temperature cycling Specified Value After testing, me et the specified characteristics at a room temperature. Test Methods and Remarks Temp. range －40 to ＋100℃. 500cycle. ７. Static humidity Specified Value After testing, me et the specified characteristics at a room temperature. Test Methods and Remarks ＋85℃, 90% to 95%RH, apply DC5V, 1000hours. 8. High temperature storage life Specified Value After testing, me et the specified characteristics at a room temperature. Test Methods and Remarks ＋100℃, 1000hours. 9. Low temperature storage life Specified Value After testing, me et the specified characteristics at a room temperature. Test Methods and Remarks －40℃, 1000hours.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . sawfilter_reli_e-E02R01 10. High Temperature Bias Specified Value After testing, me et the specified characteristics at a room temperature. Test Methods and Remarks ＋50℃, ＋29dBm, 50000hours. 11. Solderbility 1 Specified Value More than 90% of area of terminals to be covered with the solder. A change of the remarkable appearance do not have it. Test Methods and Remarks Lead-free Solder paste, Reflow；Peak temperature 245℃ 12. Solderbility 2 Specified Value More than 90% of area of terminals to be covered with the solder. A change of the remarkable appearance do not have it. Test Methods and Remarks Sn-Pb Solder paste, Reflow；Peak temperature 235℃ 13. Solder heat resistance Specified Value After testing, meet the specified characteristics at a room temperature. A change of the remarkable appearance do not have it. Test Methods and Remarks ◆Recommended temperature profile of reflow soldering Figure shows recommended temperature profile of reflow soldering in the case of lead-free solder alloy Sn3.0Ag0.5Cu. Suitable condition for solder heating is differed depending on composition and manufacturing method. Please contact to solder manufacturer for the details.