DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Tgard™ 5000NT1 Thermally Conductive Insulator (With Natural Tack) USA: +1.423.308.1690 Europe: +42.0.4885.7511.1 Asia: +86.022 66298160 www.lairdtech.com THR-DS-Tgard 5000 1215 Any information furnished by Laird Technologies, Inc. and its agents is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility for the use and application of Laird Technologies materials rests with the end user. Laird Technologies makes no warranties as to the fitness, merchantability, suitability or non- infringement of any Laird Technologies materials or products for any specific or general uses. Laird Technologies shall not be liable for incidental or consequential damages of any kind. All Laird Technologies products are sold pursuant to the Laird Technologies’ Terms and Conditions of sale in effect from time to time, a copy of which will be furnished upon request. © Copyright 2015 Laird Technologies, Inc. All Rights Reserved. Laird, Laird Technologies, the Laird Technologies Logo, and other marks are trademarks or registered trademarks of Laird Technologies, Inc. or an affiliate company thereof. Other product or service names may be the property of third parties. Nothing herein provides a license under any Laird Technologies or any third party intellectual property rights. Version A01 THERMALLY CONDUCTIVE ELECTRICALLY INSULATIVE MATERIAL Tgard™ 5000NT1 is an excellent dielectric material with good thermal performance consisting of polyimide film coated with ceramic-filled, high-temperature silicone rubber. The unique natural tack on one side is specially designed for ease of placement on the component. The inherent tack also enables repositionable after the initial placement and assembly error minimization. Tgard™ 5000NT1 is ideal for applications that require a delta temperature across the interface of 2.0ºC- in² /watt or higher on a TO-220 clip mounted @ 50 psi pressure. Tgard™ 5000NT1 has high dielectric strength for the AC side of a switching mode power supply. Tgard™ 5000NT1 is tough resulting in an exceptional cut-through resistant material. FEATURES AND BENEFITS Unique natural tack offers excellent thermal performance and ease of placement Repositionable to reduce assembly error and increase utilization High dielectric breakdown voltage of 6,000 volts Film base reinforced offers cut through resistant Thermal resistance of 0.40°C-in² /watt @ 50psi clip pressure Thermal resistance of 0.23°C-in² /watt @ 400psi MARKETS Switch mode power supplies for: - Communications - Consumer Electronics - Industrial - Instrumentation - Medical Electrical power generators UPS unit
Tgard™ 5000NT1 Thermally Conductive Insulator (With Natural Tack) USA: +1.423.308.1690 Europe: +42.0.4885.7511.1 Asia: +86.022 66298160 www.lairdtech.com THR-DS-Tgard 5000 1215 Any information furnished by Laird Technologies, Inc. and its agents is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility for the use and application of Laird Technologies materials rests with the end user. Laird Technologies makes no warranties as to the fitness, merchantability, suitability or non- infringement of any Laird Technologies materials or products for any specific or general uses. Laird Technologies shall not be liable for incidental or consequential damages of any kind. All Laird Technologies products are sold pursuant to the Laird Technologies’ Terms and Conditions of sale in effect from time to time, a copy of which will be furnished upon request. © Copyright 2015 Laird Technologies, Inc. All Rights Reserved. Laird, Laird Technologies, the Laird Technologies Logo, and other marks are trademarks or registered trademarks of Laird Technologies, Inc. or an affiliate company thereof. Other product or service names may be the property of third parties. Nothing herein provides a license under any Laird Technologies or any third party intellectual property rights. Version A01 PROPERTIES TEST METHOD METRIC VALUES IMPERIAL VALUES ELECTRICAL PROPERTIES Dielectric withstand voltage 50mm probe for 30 sec ASTM D149 4,500 volts DC 4,500 volts DC Dielectric breakdown voltage 50mm probe ASTM D149 Avg > 6,000 volts AC Avg > 6,000 volts AC Volume resistivity ASTM D257 1012 ohm-cm 1012 ohm-in Dielectric constant @ 1MHz ASTM D257 3.4 3.4 MECHANICAL PROPERTIES Thickness 0.127 mm 5 mils Hardness ASTM D2240 75 Shore A 75 Shore A Tensile strength ASTM D412 33.1 Mpa 4.8 Kpsi Elongation along width or length ASTM D412 45% 45% Operating temperature range -60℃ to 180℃ -76℉ to 365℉ Color Tan Tan UL flammability rating UL 94 V-0 V-0 PRESSURE UNITS 10 (69) (172) (345) 100 (689) 200 (1379) 400 (2758) TOTAL THERMAL RESISTANCE Modified ASTM Modified ASTM Configurations available: Sheet form, roll form and die-cut parts Standard options: 17.5” x 18” sheets, 17.5” x 65M, 17.5” x 30M roll or custom configuration Standard die-cut parts: Standard part sizes for TO-220, TO-247, TO-3P, TO-3PL and TO-264 Custom die-cut parts: Custom configurations available with standard tolerance of 0.5mm (0.020”) Ability to handle drawings in multiple file formats. (DXF and .DWG preferred)