D5203 GMI | Alldatasheet
Document overview
- PDF pages: 2
Technical content
www.gminternational.com D5203 Diagnostic Module for DIN-Rail Power Supply Distribution & Diagnostics
ORDERING INFORMATION
D5203S: 1 channel Accessories Bus Connector JDFT050, Bus Mounting Kit OPT5096. TECHNICAL DATA Simplified bus fault acquisition The D5203 is used to repeat the common fault signal from the Power Bus via a SPDT relay.
FEATURES
24 Vdc nom (18 to 30 Vdc), reverse polarity protected. Current consumption: 10 mA @ 24 Vdc with relay energized, typical. Power dissipation: 0.25 W @ 24 Vdc with relay energized, typical. Connection: through Power Bus. LEDs: common fault (red). Fault Cumulative fault: cumulative fault indication (about presence of short or open field circuit for any module on the Bus). Fault signaling: one voltage free NE SPDT relay contact (de-energized in fault condition). Contact material: Ag Alloy (Cd free). Contact rating: 4 A 250 Vac 1000 VA, 4 A 250 Vdc 120 W (resistive load). DC and AC load breaking capacity: refer to Instruction Manual. Mechanical / electrical life: 5 * 10⁶ / 3 * 10⁴ operations, typical. Operate / release time: 8 / 4 ms, typical. Isolation Relay contact groups/Supply 1.5 kV. Environmental conditions Operating temperature: temperature limits –40 to +70 °C. Storage temperature: temperature limits –45 to +80 °C. Mounting DIN-Rail 35 mm with Power Bus. Weight: about 170 g. Connection: by polarized plug-in disconnect screw terminal blocks to accomodate terminations up to 2.5 mm² (13 AWG). Dimensions: Width 22.5 mm, Depth 123 mm, Height 120 mm. OVERALL DIMENSIONS Functional Safety Management Certification: GM International is certified to conform to IEC61508:2010 part 1 clauses 5-6 for safety related systems up to and included SIL3. In addition, GM International products have been granted I.S. certificates from the most credited Notified Bodies in the world. Data specified in this document are merely descriptive of the products and should be integrated with relevant technical specifications. Our products are in constant development and the information presented herein refers to the time of document issue. No statements concerning a certain condition or suitability for a certain application can be derived from our information. The information given does not release the user from the obligation of own judgment and verification. Terms & Conditions can be found at our website. For more information refer to istruction manual.
Additional installation diagrams may be found in Instruction Manual. Field Safe Area Functional Safety Management Certification: GM International is certified to conform to IEC61508:2010 part 1 clauses 5-6 for safety related systems up to and included SIL3. In addition, GM International products have been granted I.S. certificates from the most credited Notified Bodies in the world. Data specified in this document are merely descriptive of the products and should be integrated with relevant technical specifications. Our products are in constant development and the information presented herein refers to the time of document issue. No statements concerning a certain condition or suitability for a certain application can be derived from our information. The information given does not release the user from the obligation of own judgment and verification. Terms & Conditions can be found at our website. For more information refer to istruction manual.