D5090 GMI | Alldatasheet
Document overview
- PDF pages: 2
Technical content
www.gminternational.com D5090 SIL3 Relay Out Module for 5 A NE Loads Safety Relays
ORDERING INFORMATION
D5090S: 1 channel Accessories DIN-Rail stopper MCHP196. TECHNICAL DATA SIL 3 / SC 3 for NE loads with NE driver Installation in Zone 2/Div. 2 Up to 5 A functional / 6 A inrush current Load disconnection on both supply lines available Compatible with DCS/PLC pulse testing Service contact available Input/Output isolation The D5090 is a relay module suitable for switching safety related circuits, up to SIL 3 level, for high risk industries. It provides isolation between input and output contacts. It makes available two NO contacts for Normally Energized (NE) loads, in order to disconnect the load on both supply lines, and a NC contact for service purpose. A wide compatibility towards different DCS/PLC is guaranteed: driving pulse testing is permitted by a dedicated internal circuit, which prevents contact and LED flickering.
FEATURES
24 Vdc nom (21.6 to 27.6 Vdc), reverse polarity protected. Relay coils are internally protected with suppressor diodes. Current consumption: 45 mA @ 24 Vdc, typical. Power dissipation: 1.1 W @ 24 Vdc, typical. Output 1 voltage free SPDT relay contact identified with outputs: Out 1 (NO contact) terminals 7-11 and Service Load Out (NC contact) terminals 9-10; 1 voltage free SPST relay contact identified with output Out 2 (NO contact) terminals 8-12. Terminals 7-11 (Out 1) and 8-12 (Out 2) are open when relay is de-energized, closed in energized relay condition. Service load output (not SIL) at terminals 9-10 is normally close when relay is de- energized, open in energized relay condition. Contact material: Ag Alloy (Cd free), gold plated. Contact rating: 5 A 250 Vac 1250 VA, 5 A 250 Vdc 140 W (resistive load). Contact min. switching current: 1 mA. Contact inrush current: 6 A @ 24 Vdc, 250 Vac. DC and AC load breaking capacity: refer to Instruction Manual. Mechanical / electrical life: 5 * 10⁶ / 3 * 10⁴ operation, typical. Operate / release time: 55 / 30 ms, typical. Isolation Input / All Outs 2.5 kV; Out 1/Out 2 500V. Environmental conditions Operating temperature: temperature limits -40 to +70 °C. Storage temperature: temperature limits -45 to +80 °C. Mounting DIN-Rail 35 mm, or on custom Term. Board. Weight: about 125 g. Connection: by polarized plug-in disconnect screw terminal blocks to accommodate terminations up to 2.5 mm² (13 AWG). Dimensions: Width 12.5 mm, Depth 123 mm, Height 120 mm. OVERALL DIMENSIONS Functional Safety Management Certification: GM International is certified to conform to IEC61508:2010 part 1 clauses 5-6 for safety related systems up to and included SIL3. In addition, GM International products have been granted I.S. certificates from the most credited Notified Bodies in the world. Data specified in this document are merely descriptive of the products and should be integrated with relevant technical specifications. Our products are in constant development and the information presented herein refers to the time of document issue. No statements concerning a certain condition or suitability for a certain application can be derived from our information. The information given does not release the user from the obligation of own judgment and verification. Terms & Conditions can be found at our website. For more information refer to istruction manual.
Additional installation diagrams may be found in Instruction Manual. Field Safe Area/Zone 2/Div. 2 Functional Safety Management Certification: GM International is certified to conform to IEC61508:2010 part 1 clauses 5-6 for safety related systems up to and included SIL3. In addition, GM International products have been granted I.S. certificates from the most credited Notified Bodies in the world. Data specified in this document are merely descriptive of the products and should be integrated with relevant technical specifications. Our products are in constant development and the information presented herein refers to the time of document issue. No statements concerning a certain condition or suitability for a certain application can be derived from our information. The information given does not release the user from the obligation of own judgment and verification. Terms & Conditions can be found at our website. For more information refer to istruction manual.