STB4NK60Z-1_V01 STMICROELECTRONICS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 32

Technical content

Datasheet sections

  • 1 Electrical ratings
  • 2 Electrical characteristics
  • 2.1 Electrical characteristics (curves)
  • 3 Test circuits
  • 4 Package information
  • 4.1 I²PAK package information
  • 4.2 D²PAK (TO-263) type A package information
  • 4.3 D²PAK (TO-263) type B package information
  • 4.4 IPAK (TO-251) type A package information
  • 4.5 IPAK (TO-251) type C package information
  • 4.6 DPAK (TO-252) type A2 package information
  • 4.7 DPAK (TO-252) type C2 package information
  • 4.8 DPAK (TO-252) type E package information
  • 4.9 D²PAK and DPAK packing information
  • 5 Ordering information

Features

Order codes VDS RDS(on) max. PTOT ID STB4NK60Z-1

600 V 2 Ω 70 W 4 A

  • Extremely high dv/dt capability
  • 100% avalanche tested
  • Gate charge minimized
  • Zener-protected

Applications

  • Switching applications

Description

These high-voltage devices are Zener-protected N-channel Power MOSFETs developed using the SuperMESH™ technology by STMicroelectronics, an optimization of the well-established PowerMESH™. In addition to a significant reduction in on-resistance, these devices are designed to ensure a high level of dv/dt capability for the most demanding applications.Product status STB4NK60Z-1 STB4NK60ZT4 STD4NK60Z-1 STD4NK60ZT4 N-channel 600 V, 1.7 Ω typ., 4 A SuperMESH™ Power MOSFETs in I2PAK, D2PAK, IPAK and DPAK packages STB4NK60Z-1, STB4NK60ZT4 STD4NK60Z-1, STD4NK60ZT4 Datasheet DS2818 - Rev 9 - April 2018 For further information contact your local STMicroelectronics sales office.

1 Electrical ratings

Table 1. Absolute maximum ratings

  1. Pulse width limited by safe operating area.

Table 2. Thermal data Table 3. Avalanche characteristics

2 Electrical characteristics

(TCASE = 25 °C unless otherwise specified) Table 4. On/off states

  1. Defined by design, not subject to production test.

Table 5. Dynamic

  1. C oss eq. is defined as a constant equivalent capacitance giving the same charging time as Coss when VDSincreases from 0 to

Electrical characteristics

Table 6. Source-drain diode Table 7. Gate-source Zener diode The built-in back-to-back Zener diodes are specifically designed to enhance the ESD performance of the device. additional external componentry.

2.1 Electrical characteristics (curves)

Figure 1. Safe operating area Figure 2. Thermal impedance Figure 3. Output characterisics Figure 4. Transfer characteristics Figure 5. Static drain-source on-resistance Figure 6. Gate charge vs gate-source voltage

3 Test circuits

Figure 13. Test circuit for resistive load switching times Figure 14. Test circuit for gate charge behavior Figure 15. Test circuit for inductive load switching and Figure 16. Unclamped inductive load test circuit Figure 17. Unclamped inductive waveform Figure 18. Switching time waveform

4 Package information

In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. STB4NK60Z-1, STB4NK60ZT4, STD4NK60Z-1, STD4NK60ZT4

Package information

4.1 I²PAK package information

Figure 19. I²PAK package outline

Table 8. I²PAK package mechanical data

4.2 D²PAK (TO-263) type A package information

Figure 20. D²PAK (TO-263) type A package outline

Table 9. D²PAK (TO-263) type A package mechanical data

4.3 D²PAK (TO-263) type B package information

Figure 21. D²PAK (TO-263) type B package outline

Table 10. D²PAK (TO-263) type B mechanical data

Figure 22. D²PAK (TO-263) recommended footprint (dimensions are in mm)

4.4 IPAK (TO-251) type A package information

Figure 23. IPAK (TO-251) type A package outline

Table 11. IPAK (TO-251) type A package mechanical data

4.5 IPAK (TO-251) type C package information

Figure 24. IPAK (TO-251) type C package outline

Table 12. IPAK (TO-251) type C package mechanical data

4.6 DPAK (TO-252) type A2 package information

Figure 25. DPAK (TO-252) type A2 package outline

Table 13. DPAK (TO-252) type A2 mechanical data

4.7 DPAK (TO-252) type C2 package information

Figure 26. DPAK (TO-252) type C2 package outline

Table 14. DPAK (TO-252) type C2 mechanical data

4.8 DPAK (TO-252) type E package information

Figure 27. DPAK (TO-252) type E package outline

Table 15. DPAK (TO-252) type E mechanical data Figure 28. DPAK (TO-252) recommended footprint (dimensions are in mm)

4.9 D²PAK and DPAK packing information

Figure 29. Tape outline

Figure 30. Reel outline Table 16. D²PAK tape and reel mechanical data

Table 17. DPAK tape and reel mechanical data

5 Ordering information

Table 18. Order codes

Ordering information

Revision history

Table 19. Document revision history 25-Oct-2006 4 Document reformatted no content change. 04-Mar-2008 5 Modified TO-220 and TO-220FP mechanical data. 16-Apr-2008 6 Minor text changes to improve readability.

  1. Dynamic, Table 6. Source-drain diode and Table 7. Gate-source Zener