D45C12 ONSEMI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Features

  • /C0259Low Collector-Emitter Saturation V oltage - 0.5 V (Max)
  • /C0259High ft for Good Frequency Response
  • /C0259Low Leakage Current
  • /C0259Pb-Free Packages are Available* ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ MAXIMUM RATINGS ÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎ Rating ÎÎÎ ÎÎÎ Symbol ÎÎÎÎ ÎÎÎÎ Value ÎÎÎ ÎÎÎ Unit ÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎ Collector-Emitter Voltage ÎÎÎ ÎÎÎ VCEO ÎÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎ Vdc ÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎ Collector-Emitter Voltage ÎÎÎ ÎÎÎ VCES ÎÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎ Vdc ÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎ Emitter Base Voltage ÎÎÎ ÎÎÎ VEB ÎÎÎÎ ÎÎÎÎ 5.0 ÎÎÎ ÎÎÎ Vdc ÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎ Collector Current - Continuous Peak (Note 1) ÎÎÎ ÎÎÎ ÎÎÎ IC ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ 4.0 6.0 ÎÎÎ ÎÎÎ ÎÎÎ Adc ÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎ Total Power Dissipation @ TC = 25°C Total Power Dissipation @ TA = 25°C ÎÎÎ ÎÎÎ PD ÎÎÎÎ ÎÎÎÎ 1.67 ÎÎÎ ÎÎÎ W W/°C ÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎ Operating and Storage Junction Temperature Range ÎÎÎ ÎÎÎ ÎÎÎ TJ, Tstg ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ -/C025755 to 150 ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ THERMAL CHARACTERISTICS ÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎ Characteristic ÎÎÎ ÎÎÎ Symbol ÎÎÎÎ ÎÎÎÎ Max ÎÎÎ ÎÎÎ Unit ÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎ Thermal Resistance, Junction-to-Case ÎÎÎ ÎÎÎ ÎÎÎ R/C0113JC ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ 4.2 ÎÎÎ ÎÎÎ ÎÎÎ °C/W ÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎ Thermal Resistance, Junction-to-Ambient ÎÎÎ ÎÎÎ R/C0113JA ÎÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎ °C/W ÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎ Maximum Lead Temperature for Soldering Purposes: 1/8 in from Case for 5 Sec ÎÎÎ ÎÎÎ ÎÎÎ TL ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ 275 ÎÎÎ ÎÎÎ ÎÎÎ 1. Pulse Width /C0118 6.0 ms, Duty Cycle /C0118 50%. *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. D4xC12G AYWW Base Emitter Collector Collector

4.0 AMPERE COMPLEMENTARY

& PIN ASSIGNMENT x = 4 or 5 A = Assembly Location Y = Year WW = Work Week G = Pb-Free Package See detailed ordering and shipping information in the package dimensions section on page 2 of this data sheet.

ORDERING INFORMATION

http://onsemi.com

D45C12 (PNP), D44C12 (NPN) http://onsemi.com ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise noted) ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Characteristic ÎÎÎÎ ÎÎÎÎ Symbol ÎÎÎÎ ÎÎÎÎ Min ÎÎÎÎ ÎÎÎÎ Max ÎÎÎ ÎÎÎ Unit ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ DC Current Gain (VCE = 1.0 Vdc, IC = 0.2 Adc) (VCE = 1.0 Vdc, IC = 1.0 Adc) (VCE = 1.0 Vdc, IC = 2.0 Adc) ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ hFE ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ 120 ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ELECTRICAL CHARACTERISTICS (TC = 25°C unless otherwise noted) ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Characteristic ÎÎÎÎ ÎÎÎÎ Symbol ÎÎÎ ÎÎÎ Min ÎÎÎ ÎÎÎ Typ ÎÎÎ ÎÎÎ Max ÎÎÎ ÎÎÎ Unit ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ OFF CHARACTERISTICS ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Collector Cutoff Current (VCE = Rated VCES, VBE = 0) ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ICES ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ 0.1 ÎÎÎ ÎÎÎ ÎÎÎ /C0109A ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Emitter Cutoff Current (VEB = 5.0 Vdc) ÎÎÎÎ ÎÎÎÎ IEBO ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ /C0109A ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ON CHARACTERISTICS ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Collector-Emitter Saturation Voltage (IC = 1.0 Adc, IB = 50 mAdc) ÎÎÎÎ ÎÎÎÎ VCE(sat) ÎÎÎ ÎÎÎ - ÎÎÎ ÎÎÎ 0.135ÎÎÎ ÎÎÎ 0.5ÎÎÎ ÎÎÎ Vdc ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Base-Emitter Saturation Voltage (IC = 1.0 Adc, IB = 100 mAdc) ÎÎÎÎ ÎÎÎÎ VBE(sat) ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ 0.85 ÎÎÎ ÎÎÎ 1.3 ÎÎÎ ÎÎÎ Vdc ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ DYNAMIC CHARACTERISTICS ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Collector Capacitance (VCB = 10 Vdc, f = 1.0 MHz) ÎÎÎÎ ÎÎÎÎ Ccb ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ 125 ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ pF ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Gain Bandwidth Product (IC = 20 mA, VCE = 4.0 Vdc, f = 20 MHz) ÎÎÎÎ ÎÎÎÎ fT ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ MHz ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ SWITCHING TIMES ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Delay and Rise Times (IC = 1.0 Adc, IB1 = 0.1 Adc) ÎÎÎÎ ÎÎÎÎ td + tr ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ns ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Storage Time (IC = 1.0 Adc, IB1 = IB2 = 0.1 Adc) ÎÎÎÎ ÎÎÎÎ ts ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ 350 ÎÎÎ ÎÎÎ 550 ÎÎÎ ÎÎÎ ns ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Fall Time (IC = 1.0 Adc, IB1 = IB2 = 0.1 Adc) ÎÎÎÎ ÎÎÎÎ tf ÎÎÎ ÎÎÎ - ÎÎÎ ÎÎÎ 50ÎÎÎ ÎÎÎ 75ÎÎÎ ÎÎÎ ns Device Package Shipping† D45C12 TO-220AB

50 Units / Rail

(Pb-Free) D44C12 TO-220AB D44C12G TO-220AB (Pb-Free) †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. 200 0.04 Figure 1. Typical DC Current Gain

0.01 IC, COLLECTOR CURRENT (AMPS)

Figure 2. Maximum Rated Forward Bias

D45C12 (PNP), D44C12 (NPN) http://onsemi.com PACKAGE DIMENSIONS TO-220 CASE 221A-09 ISSUE AE NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION Z DEFINES A ZONE WHERE ALL BODY AND LEAD IRREGULARITIES ARE ALLOWED. DIM MIN MAX MIN MAX MILLIMETERSINCHES A 0.570 0.620 14.48 15.75 B 0.380 0.405 9.66 10.28 C 0.160 0.190 4.07 4.82 D 0.025 0.035 0.64 0.88 F 0.142 0.161 3.61 4.09 G 0.095 0.105 2.42 2.66 H 0.110 0.155 2.80 3.93 J 0.014 0.025 0.36 0.64 K 0.500 0.562 12.70 14.27 L 0.045 0.060 1.15 1.52 N 0.190 0.210 4.83 5.33 Q 0.100 0.120 2.54 3.04 R 0.080 0.110 2.04 2.79 S 0.045 0.055 1.15 1.39 T 0.235 0.255 5.97 6.47 U 0.000 0.050 0.00 1.27 B Q H Z L V G N A K F 12 3 D SEATING PLANE-T- C ST U R J ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different application s and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, direct ly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5773-3850 D45C12/D LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your loca l Sales Representative