D3V-011K-2C4A

D3V_V01 OMRON | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 12

Technical content

D V D3V Miniature Basic Switch Reliable Basic Switch with External Lever

• Available by 21 A, 16 A, 11 A, 6 A and 0.1 A models, all with self-cleaning contacts.
• Available with internally or externally fitted levers. RoHS Compliant Model Number Legend 1. Ratings 21 : 20 (4) A at 250 VAC 16 : 16 (3) A at 250 VAC 11 : 11 (3) A at 250 VAC 6 : 16 (2) A at 250 VAC 01 : 0.1 A at 125 VAC 2. Contact Gap None : 1 mm (F gap) G : 0.5 mm (G gap) 3. Actuator None : Pin plunger 1 : Short hinge lever 2 : Hinge lever 3 : Long hinge lever 4 : Simulated roller lever 5 : Short hinge roller lever 6 : Hinge roller lever 4. Hinge Position 5. Contact Form 1 : SPDT 2 : SPST-NC 3 : SPST-NO 6. Terminals A : Solder terminals C2 : Quick-connect terminals (#187) C : Quick-connect terminals (#250) 7. Maximum Operating Force 5 : 1.96 N {200 gf} 4A : 1.23 N {125 gf} 4 : 0.98 N {100 gf} 3 : 0.49 N {50 gf} 2 : 0.25 N {25 gf} Note. These values are for the pin plunger models. 8. Mounting Hole Size None : 3.1 mm K : 2.9 mm 9. Special Code None : Standard H : High temperature (125°C) (See note) E : Special rating: 21 (8) A Note. Consult your OMRON sales representative for high temperature models. None : Internal/Far from plunger K : External/Near plunger

D3V Miniature Basic Switch D V List of Models Note. If you need mounting hole 2.9 mm, add "-K" at last of model. Consult your OMRON sales representative when you can't find a model on this List of Models. Note. If you need mounting hole 2.9 mm, add "-K" at last of model. Consult your OMRON sales representative when you can't find a model on this List of Models. Terminals Quick-connect terminals (#250) (C)Ratings Contact gap Actuators Contact form Maximum operating force (OF) 21 A 0.5 mm (G gap) Pin plunger SPDT

1.23 N {125 gf}

0.78 N {80 gf}

0.44 N {45 gf}

Simulated roller lever SPDT

0.83 N {85 gf}

Short hinge roller lever SPDT

1.42 N {145 gf}

0.79 N {80 gf}

Terminals Solder terminals (A) Quick-connect terminals (#187) (C2) Quick-connect terminals (#250) (C)Ratings Contact gap Actuators Contact form Maximum operating force (OF)

16 A 1 mm

(F gap) Pin plunger SPDT

1.96 N {200 gf}

D3V-16-1A5 D3V-16-1C25 D3V-16-1C5 SPDT -NC D3V-16-2A5 D3V-16-2C25 D3V-16-2C5 SPDT -NO D3V-16-3A5 D3V-16-3C25 D3V-16-3C5 Short hinge lever SPDT D3V-161-1A5 D3V-161-1C25 D3V-161-1C5 SPDT -NC D3V-161-2A5 D3V-161-2C25 D3V-161-2C5 SPDT -NO D3V-161-3A5 D3V-161-3C25 D3V-161-3C5 Hinge lever SPDT D3V-162-1A5 D3V-162-1C25 D3V-162-1C5 SPDT -NC D3V-162-2A5 D3V-162-2C25 D3V-162-2C5 SPDT -NO D3V-162-3A5 D3V-162-3C25 D3V-162-3C5 Long hinge lever SPDT

0.69 N {70 gf}

D3V-163-1A5 D3V-163-1C25 D3V-163-1C5 SPDT -NC D3V-163-2A5 D3V-163-2C25 D3V-163-2C5 SPDT -NO D3V-163-3A5 D3V-163-3C25 D3V-163-3C5 Simulated roller lever SPDT D3V-164-1A5 D3V-164-1C25 D3V-164-1C5 SPDT -NC D3V-164-2A5 D3V-164-2C25 D3V-164-2C5 SPDT -NO D3V-164-3A5 D3V-164-3C25 D3V-164-3C5 Short hinge roller lever SPDT

2.35 N {240 gf}

D3V-165-1A5 D3V-165-1C25 D3V-165-1C5 SPDT -NC D3V-165-2A5 D3V-165-2C25 D3V-165-2C5 SPDT -NO D3V-165-3A5 D3V-165-3C25 D3V-165-3C5 Hinge roller lever SPDT D3V-166-1A5 D3V-166-1C25 D3V-166-1C5 SPDT -NC D3V-166-2A5 D3V-166-2C25 D3V-166-2C5 SPDT -NO D3V-166-3A5 D3V-166-3C25 D3V-166-3C5

D3V Miniature Basic Switch D V Note. If you need mounting hole 2.9 mm, add "-K" at last of model. Consult your OMRON sales representative when you can't find a model on this List of Models. Note. If you need mounting hole 2.9 mm, add "-K" at last of model. Consult your OMRON sales representative when you can't find a model on this List of Models. Terminals Solder terminals (A) Quick-connect terminals (#187) (C2) Quick-connect terminals (#250) (C)Ratings Contact gap Actuators Contact form Maximum operating force (OF)

11 A 1 mm

(F gap) Pin plunger SPDT 1.96N {200 gf} D3V-11-1A5 D3V-11-1C25 D3V-11-1C5 SPDT -NC --- SPDT -NO --- Short hinge lever SPDT 1.96N {200 gf} D3V-111-1A5 D3V-111-1C25 D3V-111-1C5 SPDT -NC --- SPDT -NO --- Hinge lever SPDT 1.23N {125 gf} D3V-112-1A5 D3V-112-1C25 D3V-112-1C5 SPDT -NC --- SPDT -NO --- Long hinge lever SPDT 0.69N {70 gf} D3V-113-1A5 D3V-113-1C25 D3V-113-1C5 SPDT -NC --- SPDT -NO --- Simulated roller lever SPDT 1.23N {125 gf} D3V-114-1A5 D3V-114-1C25 D3V-114-1C5 SPDT -NC --- SPDT -NO --- Short hinge roller lever SPDT 2.35N {240 gf} D3V-115-1A5 D3V-115-1C25 D3V-115-1C5 SPDT -NC --- SPDT -NO --- Hinge roller lever SPDT 1.23N {125 gf} D3V-116-1A5 D3V-116-1C25 D3V-116-1C5 SPDT -NC --- SPDT -NO --- Terminals Solder terminals (A) Quick-connect terminals (#187) (C2) Quick-connect terminals (#250) (C)Ratings Contact gap Actuators Contact form Maximum operating force (OF) (F gap) Pin plunger SPDT 0.98N {100 gf} D3V-11-1A4 D3V-11-1C24 D3V-11-1C4 SPDT -NC --- SPDT -NO --- Short hinge lever SPDT 0.98N {100 gf} D3V-111-1A4 D3V-111-1C24 D3V-111-1C4 SPDT -NC --- SPDT -NO --- Hinge lever SPDT 0.59N {60 gf} D3V-112-1A4 D3V-112-1C24 D3V-112-1C4 SPDT -NC --- SPDT -NO --- Long hinge lever SPDT 0.34N {35 gf} D3V-113-1A4 D3V-113-1C24 D3V-113-1C4 SPDT -NC --- SPDT -NO --- Simulated roller lever SPDT 0.59N {60 gf} D3V-114-1A4 D3V-114-1C24 D3V-114-1C4 SPDT -NC --- SPDT -NO --- Short hinge roller lever SPDT 1.18N {120 gf} D3V-115-1A4 D3V-115-1C24 D3V-115-1C4 SPDT -NC --- SPDT -NO --- Hinge roller lever SPDT 0.59N {60 gf} D3V-116-1A4 D3V-116-1C24 D3V-116-1C4 SPDT -NC --- SPDT -NO ---

D3V Miniature Basic Switch D V Note. If you need mounting hole 2.9 mm, add "-K" at last of model. Consult your OMRON sales representative when you can't find a model on this List of Models. Terminals Solder terminals (A) Quick-connect terminals (#187) (C2) Quick-connect terminals (#250) (C)Ratings Contact gap Actuators Contact form Maximum operating force (OF)

6 A 1 mm

(F gap) Pin plunger SPDT

0.98 N {100 gf}

D3V-6-1A4 D3V-6-1C24 D3V-6-1C4 SPDT -NC --- SPDT -NO --- Short hinge lever SPDT D3V-61-1A4 D3V-61-1C24 D3V-61-1C4 SPDT -NC --- SPDT -NO --- Hinge lever SPDT

0.59 N {60 gf}

D3V-62-1A4 D3V-62-1C24 D3V-62-1C4 SPDT -NC --- SPDT -NO --- Long hinge lever SPDT

0.34 N {35 gf}

D3V-63-1A4 D3V-63-1C24 D3V-63-1C4 SPDT -NC --- SPDT -NO --- Simulated roller lever SPDT D3V-64-1A4 D3V-64-1C24 D3V-64-1C4 SPDT -NC --- SPDT -NO --- Short hinge roller lever SPDT

1.18 N {120 gf}

D3V-65-1A4 D3V-65-1C24 D3V-65-1C4 SPDT -NC --- SPDT -NO --- Hinge roller lever SPDT D3V-66-1A4 D3V-66-1C24 D3V-66-1C4 SPDT -NC --- SPDT -NO --- Terminals Solder terminals (A) Quick-connect terminals (#187) (C2) Quick-connect terminals (#250) (C)Ratings Contact gap Actuators Contact form Maximum operating force (OF) 6 A 0.5 mm Ggap) Pin plunger SPDT

0.49 N {50 gf}

D3V-6G-1A3 D3V-6G-1C23 D3V-6G-1C3 SPDT -NC --- SPDT -NO --- Short hinge lever SPDT D3V-6G1-1A3 D3V-6G1-1C23 D3V-6G1-1C3 SPDT -NC --- SPDT -NO --- Hinge lever SPDT D3V-6G2-1A3 D3V-6G2-1C23 D3V-6G2-1C3 SPDT -NC --- SPDT -NO --- Long hinge lever SPDT

0.20 N {20 gf}

D3V-6G3-1A3 D3V-6G3-1C23 D3V-6G3-1C3 SPDT -NC --- SPDT -NO --- Simulated roller lever SPDT

0.29 N {30 gf}

D3V-6G4-1A3 D3V-6G4-1C23 D3V-6G4-1C3 SPDT -NC --- SPDT -NO --- Short hinge roller lever SPDT D3V-6G5-1A3 D3V-6G5-1C23 D3V-6G5-1C3 SPDT -NC --- SPDT -NO --- Hinge roller lever SPDT D3V-6G6-1A3 D3V-6G6-1C23 D3V-6G6-1C3 SPDT -NC --- SPDT -NO ---

D3V Miniature Basic Switch D V Note. If you need mounting hole 2.9 mm, add "-K" at last of model. Consult your OMRON sales representative when you can't find a model on this List of Models. Contact Form Contact Specifications Note. For more information on the minimum applicable load, refer to Using Micro Loads on page 11. Terminals Solder terminals (A) Quick-connect terminals (#187) (C2) Quick-connect terminals (#250) (C)Ratings Contact gap Actuators Contact form Maximum operating force (OF)

0.1 A 1 mm

(F gap) Pin plunger SPDT D3V-01-1A3 D3V-01-1C23 D3V-01-1C3 SPDT -NC D3V-01-2A3 D3V-01-2C23 D3V-01-2C3 SPDT -NO D3V-01-3A3 D3V-01-3C23 D3V-01-3C3 Short hinge lever SPDT D3V-011-1A3 D3V-011-1C23 D3V-011-1C3 SPDT -NC D3V-011-2A3 D3V-011-2C23 D3V-011-2C3 SPDT -NO D3V-011-3A3 D3V-011-3C23 D3V-011-3C3 Hinge lever SPDT D3V-012-1A3 D3V-012-1C23 D3V-012-1C3 SPDT -NC D3V-012-2A3 D3V-012-2C23 D3V-012-2C3 SPDT -NO D3V-012-3A3 D3V-012-3C23 D3V-012-3C3 Long hinge lever SPDT D3V-013-1A3 D3V-013-1C23 D3V-013-1C3 SPDT -NC D3V-013-2A3 D3V-013-2C23 D3V-013-2C3 SPDT -NO D3V-013-3A3 D3V-013-3C23 D3V-013-3C3 Simulated roller lever SPDT D3V-014-1A3 D3V-014-1C23 D3V-014-1C3 SPDT -NC D3V-014-2A3 D3V-014-2C23 D3V-014-2C3 SPDT -NO D3V-014-3A3 D3V-014-3C23 D3V-014-3C3 Short hinge roller lever SPDT D3V-015-1A3 D3V-015-1C23 D3V-015-1C3 SPDT -NC D3V-015-2A3 D3V-015-2C23 D3V-015-2C3 SPDT -NO D3V-015-3A3 D3V-015-3C23 D3V-015-3C3 Hinge roller lever SPDT D3V-016-1A3 D3V-016-1C23 D3V-016-1C3 SPDT -NC D3V-016-2A3 D3V-016-2C23 D3V-016-2C3 SPDT -NO D3V-016-3A3 D3V-016-3C23 D3V-016-3C3 Item Model D3V-21 D3V-16 D3V-11 D3V-6 D3V-01 Contact Specification Rivet Crossbar Material Silver alloy Gold alloy Gap (standard value) 0.5 mm 1.0 mm (F gap) or 0.5 mm (G gap) 1.0 mm Inrush current NC 50 A max. 40 A max. 24 A max. 15 A max. --- NO Minimum applicable load (see note) 160 mA at 5 VDC 1 mA at 5 VDC

• SPDT ●SPST-NC ●SPST-NO COM NC NO COM NC COM NO

D3V Miniature Basic Switch D V Ratings Note 1. The above current values are the normal current values of models with a contact gap of 1 mm (gap F), which vary with the normal current values of models with a contact gap of 0.5 mm (gap G). Note 2. The ratings values apply under the following test conditions: Ambient temperature: 20±2°C Ambient humidity: 65±5% Operating frequency: 30 operations/min Approved Safety Standards Consult your OMRON sales representative for specific models with standard approvals. UL1054 (File No. E41515)/CSA C22.2 No.55 (File No. LR21642) EN 61058-1: 1992+A1: 1993 (License No. 40024894) Testing conditions: 5E4 (50,000 operations), T85 (0 to 85°C) for D3V-21/D3V-01, T105 (0 to 105°C) for D3V-16/D3V-11/D3V-6 Testing conditions: 10,000 operations, T85 (0 to 85°C) Item Resistive load Model Rated voltage D3V-21

250 VAC 21 A

125 VDC 0.6 A 250 VDC 0.3 A D3V-16

250 VAC 16 A

125 VDC 0.6 A 250 VDC 0.3 A D3V-11

250 VAC 11 A

125 VDC 0.6 A 250 VDC 0.3 A D3V-6

250 VAC 6 A

125 VDC 0.4 A 250 VDC 0.3 A D3V-01 125 VAC 0.1 A 30 VDC 0.1 A Rated voltage Model D3V-21G D3V-16 D3V-16G D3V-11 D3V-11G D3V-6 D3V-6G D3V-01 125 VAC --- 16 A, 1/2 HP 16 A, 1/2 HP 11 A, 1/2 HP 11 A, 1/2 HP 6 A, 1/4 HP 6 A, 1/4 HP 0.1 A 250 VAC 20.1 A 16 A, 1/2 HP 16 A, 1/2 HP 11 A, 1/2 HP 11 A, 1/2 HP 6 A, 1/4 HP 6 A, 1/4 HP --- Rated voltage Model D3V-21G D3V-16 D3V-11 D3V-6 D3V-01

250 VAC 20 (4) A 16 (3) A 11 (3) A 6 (2) A ---

Rated voltage Model D3V-21G

250 VAC 21 ( 8) A

D3V Miniature Basic Switch D V Characteristics Note 1. The data given above are initial values. Note 2. The dielectric strength values shown in the table are for models with a Separator. Note 3. For the pin plunger models, the above values apply for use at both the free position and total travel position. For the lever models, they apply at the total travel position. Note 4. For testing conditions, contact your OMRON sales representative. Terminals/Appearances (Unit: mm) Note. The table below is for the SPDT contact specifications. Two terminals will be ava ilable for SPST-NO or SPST-NC contact spe cifications. For terminal positions, refer to Contact Form on page 5. Mounting Holes (Unit: mm) Item Model D3V-21 D3V-16 D3V-11 D3V-6 D3V-01 Permissible operating speed 0.1 mm to 1 m/s (pin plunger models) Permissible operating frequency Mechanical: 600 operations/min max. Electrical: 30 operations/min max. Insulation resistance 100 MΩ min. (at 500 VDC with insulation tester) Contact resistance (initial values) 50 mΩ max. 30 mΩ max. 0.49N {50 gf}: 50 mΩ max. 0.25N {25 gf}: 100 mΩ max. Dielectric strength (see note 2) 1,000 VAC, 50/60 Hz for 1 min between terminals of the same polarity 2,000 VAC, 50/60 Hz for 1 min between current-carrying metal parts and ground, and between each terminal and non- current-carrying metal parts Vibration resistance (see note 3) Malfunction: 10 to 55 Hz, 1.5-mm double amplitude Shock resistance (see note 3) Destruction: 400 m/s 2 {approx. 40 G} max. Malfunction: 100 m/s 2 {approx. 10 G} max. Durability (see note 4) Mechanical 10,000,000 operations min. Electrical 50,000 operations min. 100,000 operations min. 200,000 operations min. 500,000 operations min. Degree of protection IEC IP40 Degree of protection against electric shock Class I Proof tracking index (PTI) 250 Ambient operating temperature –25 to +85°C (at ambient humidity of 60% max.) (with no icing or condensation) –25 to +105°C (at ambient humidity of 60% max.) (with no icing or condensation) –25 to +85°C (at ambient humidity of 60% max.) (with no icing or condensation) Ambient operating humidity 85% max. (for +5 to +35°C) Weight Approx. 6.2 g (pin plunger models) Solder Terminals (A) Quick-connect Terminals (#187) (C2) Quick-connect Terminals (#250) (C) t = 0.5 Three, solder terminals (10) 2.9 (6.5) (5.5) t = 0.5 Three, quick-connect terminals (#187) (10) 2.9 (6.5) (5.5) t = 0.8 Three, quick-connect terminals (#250) (12.0) 3.2 (7.7) (4.9) 1.6 dia.2.4 dia. 4.75±0.1 6.35 3.2 (see note) Note: Indicates the length to the center of the 1.6-dia. holes 1.6-dia. terminal hole 4.75±0.1 3.2 6.35 1.65-dia. terminal hole 6.35±0.1 3.95 Two, 3.1-dia. mounting holes or M3 screw holes 10.3±0.1 22.2±0.1

D3V Miniature Basic Switch D V Dimensions (Unit: mm) and Operating Characteristics The following illustrations and drawings are for quick-connect terminals (#187) (terminals C2). D3V models incorporate terminals A and C. These models are different from #187 models in terminal size only. Terminals A and C are omitted from the following drawings. Refer to "Terminals/Appearances" on page 7 for these terminals. The @ in the model number is for the terminal code. Note 1. Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions. Note 2. The operating characteristics are for operation in the A direction () . t=0.5 Three, quick-connect terminals (#187) A Model Operating Characteristics D3V-21G-1C4A D3V-16-1@5 D3V-11-1@5 D3V-11-1@4 Operating Force OF Max. Releasing Force RF Min.

0.15 N {15 gf}

0.05 N {5 gf}

Pretravel PT Max. Overtravel OT Min. Movement Differential MD Max. 1.2 mm 1.0 mm 0.3 mm 1.2 mm 1.0 mm 0.4 mm 1.2 mm 1.0 mm 0.3 mm 1.2 mm 1.0 mm 0.4 mm Operating Position OP 14.7±0.4 mm

• Pin Plunger Models D3V-21G-1C4A D3V-16-1@5 D3V-11-1@5 D3V-11-1@4 D3V-6-1@4 D3V-6G-1@3 D3V-01-1@3 Model Operating Characteristics D3V-21G1-1C4A D3V-161-1@5 D3V-111-1@5 D3V-111-1@4 Operating Force OF Max. Releasing Force RF Min.

Pretravel PT Max. Overtravel OT Min. Movement Differential MD Max. 1.6 mm 0.8 mm 0.5 mm 1.6 mm 0.8 mm 0.6 mm 1.6 mm 0.8 mm 0.5 mm 1.6 mm 0.8 mm 0.6 mm Operating Position OP 15.2±0.5 mm 4.2 10.3 2.85 PT 22.1 8.1 1.63.1 dia. hole+0.13 −0.03 0.7 7.218.7 15.9 t=0.5 Three, #187 series tab 2.8 (10) 27.8 37.8±0.8 3.4±0.15 dia. hole 22.2±0.1 3.1+0.13 −0.03 10.3±0.1 OP 2.8 t=0.5 A●Short Hinge Lever Models D3V-21G1-1C4A D3V-161-1@5 D3V-111-1@5 D3V-111-1@4 D3V-61-1@4 D3V-6G1-1@3 D3V-011-1@3 Model Operating Characteristics D3V-21G2-1C4A D3V-162-1@5 D3V-112-1@5 D3V-112-1@4 Operating Force OF Max. Releasing Force RF Min.

0.06 N {6 gf}

0.14 N {14 gf}

--- Pretravel PT Max. Overtravel OT Min. Movement Differential MD Max. 4.0 mm 1.6 mm 0.8 mm 4.0 mm 1.6 mm 1.5 mm 4.0 mm 1.6 mm 0.8 mm 4.0 mm 1.6 mm 1.5 mm Operating Position OP 15.2±1.2 mm 4.2 10.3 2.85 PT 35.6±0.8 8.1 1.63.1 dia. hole+0.13 −0.03 0.7 7.218.8 15.9 t=0.5 Three, #187 series tab 2.8 (10) 27.8 37.8±0.8 3.4±0.15 dia. hole 22.2±0.1 3.1+0.13 −0.03 10.3±0.1 OP 2.8 t=0.5 A●Hinge Lever Models D3V-21G2-1C4A D3V-162-1@5 D3V-112-1@5 D3V-112-1@4 D3V-62-1@4 D3V-6G2-1@3 D3V-012-1@3

D3V Miniature Basic Switch D V Note 1. Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions. Note 2. The operating characteristics are for operation in the A direction () . Model Operating Characteristics D3V-21G3-1C4A D3V-163-1@5 D3V-113-1@5 D3V-113-1@4 Operating Force OF Max. Releasing Force RF Min.

0.03 N {3 gf}

--- --- Pretravel PT Max. Overtravel OT Min. Movement Differential MD Max. 9.0 mm 2.0 mm 2.0 mm 9.0 mm 2.0 mm 2.8 mm 9.0 mm 3.2 mm 2.0 mm 9.0 mm 3.2 mm 2.8 mm Operating Position OP 15.2±2.6 mm15.2 mm+2.6 −3.2 4.2 10.3 2.85 PT 59.4±0.8 8.1 1.63.1 dia. hole+0.13 −0.03 0.7 7.218.7 15.9 t=0.5 Three, #187 series tab 2.8 (10) 27.8 37.8±0.8 3.4±0.15 dia. hole 22.2±0.1 3.1 +0.13 −0.03 10.3±0.1 OP 2.8 t=0.5 A●Long Hinge Lever Models D3V-21G3-1C4A D3V-163-1@5 D3V-113-1@5 D3V-113-1@4 D3V-63-1@4 D3V-6G3-1@3 D3V-013-1@3 Model Operating Characteristics D3V-21G4-1C4A D3V-164-1@5 D3V-114-1@5 D3V-114-1@4 Operating Force OF Max. Releasing Force RF Min.

0.07 N {7 gf}

--- Pretravel PT Max. Overtravel OT Min. Movement Differential MD Max. 4.0 mm 1.6 mm 1.4 mm 4.0 mm 1.6 mm 1.5 mm 4.0 mm 1.6 mm 1.4 mm 4.0 mm 1.6 mm 1.5 mm Operating Position OP 18.7±1.2 mm 4.2 10.3 2.85PT 32.5±0.8 8.1 1.63.1 dia. hole+0.13 −0.03 0.7 7.218.8 15.9 t=0.5 Three, #187 series tab 2.8 (10) 27.8 37.8±0.8 3.4±0.15 dia. hole 22.2±0.1 3.1+0.13 −0.03 10.3±0.1 OP 2.8 t=0.5 A●Simulated Roller Lever Models D3V-21G4-1C4A D3V-164-1@5 D3V-114-1@5 D3V-114-1@4 D3V-64-1@4 D3V-6G4-1@3 D3V-014-1@3 Model Operating Characteristics D3V-21G5-1C4A D3V-165-1@5 D3V-115-1@5 D3V-115-1@4 Operating Force OF Max. Releasing Force RF Min.

0.2 N {20 gf}

Pretravel PT Max. Overtravel OT Min. Movement Differential MD Max. 1.6 mm 0.8 mm 0.5 mm 1.6 mm 0.8 mm 0.6 mm 1.6 mm 0.8 mm 0.5 mm 1.6 mm 0.8 mm 0.6 mm Operating Position OP 20.7±0.6 mm 4.8 10.3 5.1PT20.1±0.8 8.1 1.63.1 dia. hole+0.13 −0.03 0.7 7.218.815.9 t=0.5 Three, #187 series tab 2.8 (10) 27.8 37.8±0.8 3.4±0.15 dia. hole 22.2±0.1 3.1+0.13 −0.03 10.3±0.1 OP2.8 t=0.5 A●Short Hinge Roller Lever Models D3V-21G5-1C4A D3V-165-1@5 D3V-115-1@5 D3V-115-1@4 D3V-65-1@4 D3V-6G5-1@3 D3V-015-1@3

D3V Miniature Basic Switch D V Note 1. Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions. Note 2. The operating characteristics are for operation in the A direction () . Model Operating Characteristics D3V-21G6-1C4A D3V-166-1@5 D3V-116-1@5 D3V-116-1@4 Operating Force OF Max. Releasing Force RF Min. --- Pretravel PT Max. Overtravel OT Min. Movement Differential MD Max. 4.0 mm 1.6 mm 0.8 mm 4.0 mm 1.6 mm 1.5 mm 4.0 mm 1.6 mm 0.8 mm 4.0 mm 1.6 mm 1.5 mm Operating Position OP 20.7±1.2 mm 4.8 10.3 5.1PT33.0±0.8 8.1 1.63.1 dia. hole+0.13 −0.03 0.7 7.218.7 15.9 t=0.5 Three, #187 series tab 2.8 (10) 27.8 37.8±0.8 3.4±0.15 dia. hole 22.2±0.1 3.1 +0.13 −0.03 10.3±0.1 OP2.8 t=0.5 A●Hinge Roller Lever Models D3V-21G6-1C4A D3V-166-1@5 D3V-116-1@5 D3V-116-1@4 D3V-66-1@4 D3V-6G6-1@3 D3V-016-1@3

D3V Miniature Basic Switch D V Precautions ★Please refer to "Common Precautions" for correct use.

• Handling Be careful not to drop the switch. Doing so may cause damage to the switch's internal components because it is designed for a small load.
• Mounting Use two M3 mounting screws with an appropriate screwdriver to mount the switch. Tighten the screws to a torque of 0.39 to 0.59 N·m {4 to 6 kgf·cm}.
• Mounting Direction Mount lever-operated switches with a maximum operating force of 0.49 N in a direction where the actuator weight will not be applied to the switch. Since the switch is designed for a small load, its resetting force is small. Therefore, resetting failure may occur if unnecessary load is applied to the switch.
• Insulation Distance According to EN61058-1, the minimum insulation thickness for this switch should be 1.1 mm and minimum clearance distance between the terminal and mounting plate should be 1.9 mm. If the insulation distance cannot be provided in the product incorporating the switch, either use a switch with insulation barrier or use a Separator to ensure sufficient insulation distance.
• Using Micro Loads Using a model for ordinary loads to open or close the contact of a micro load circuit may result faulty contact. Use models that operate in the following range. However, even when using micro load models within the operating range shown below, if inrush current occurs when the contact is opened or closed, it may increase contact wear and so decrease durability. Therefore, insert a contact protection circuit where necessary. The minimum applicable load is the N-level reference value. This value indicates the malfunction reference level for the reliability level of 60% (λ 60). The equation, λ 60 = 0.5 × 10-6/operations indicates that the estimated malfunction rate is less than 1/2,000,000 operations with a reliability level of 60%.
• Solder Terminal Approval Conditions Actuator (Sold Separately) Various Actuators are available as shown on D3V/V/VX/D2MV/D2RV Common Accessories. Connector (Sold Separately) Refer to Terminal Connectors. Cautions Correct Use Soldering iron can be used. Soldering hook hole available. Soldering terminal types 1 and 2 are met. Current (mA) Voltage (V) Inoperable range Operating range for general- load models Operating range for micro load models D3V-01

D3V Miniature Basic Switch D V  Application examples provided in this document are for reference only. In actual applications, confirm equipment functions and safety before using the product.  Consult your OMRON representative before using the product under conditions which are not described in the manual or applying the product to nuclear control systems, railroad systems, aviation systems, vehicles, combustion systems, medical equipment, amusement machines, safety equipment, and other systems or equipment that may have a serious influence on lives and property if used improperly. Make sure that the ratings and performance characteristics of the product provide a margin of safety for the system or equipment, and be sure to provide the system or equipment with double safety mechanisms. Cat. No.B103-E1-05 0815(0207)(O) Note: Do not use this document to operate the Unit. OMRON Corporation Electronic and Mechanical Components Company Contact: www.omron.com/ecb