D3V-01

D3V-16-3C25 OMRON | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 16

Technical content

Miniature Basic Switch D3V 73 Miniature Basic Switch D3V Reliable Basic Switch with External Lever

• Available by 0.1 A, 6 A, 11 A, 16 A and 21 A models, all with self-cleaning contacts. 0.1 A utilizes gold alloy crossbar contacts for high reliability at low loads.  Available with internally or externally fitted levers, and 2 fix- ing positions for external levers.  Conforms to EN61058-1 UL1054.  High Temperature models rated up to 200°C (D3V-6, D3V-01) and 155°C (D3V-11) are available.  RoHS Compliant.

Ordering Information

■Model Number Legend D3V - - - - - 1. Ratin gs 21: 20 (4) A at 250 VAC 16: 16 (3) A at 250 VAC 2. Contact Gap None: 1 mm (F gap) G: 0.5 mm (G gap) 11: 11 (3) A at 250 VAC 6: 6 (2) A at 250 VAC 01: 0.1 A at 125 VAC 4: 100 gf 3: 50 gf 2: 25 gf 7. Maximum Operatin g Force 5: 200 gf 4A: 125 gf 5: 200 gf 8. Enclosure Material None: Standard T: High Temperat ure 200°C for D3 V-6, D3V-01 155°C for D3 V-11 W2: E N60695-2-11/-12 Approved (Glo w wire flammability test method with PTI = 250) 5. Contact Form 1: SPDT 2: SPST- NC 9. Mountin g Hole Size None: 3.1 mm K: 2.9 mm 3: SPST- NO 4. Hin ge Position None: Internal / Far from Pl unger M: External / Far from Pl unger K: External / Near Plunger 10. Special Code None: Standard H: High Temperat ure (125°C) E: Special Rating: 21 ( 8) A (D3 V-21, only) Note: These OF values are for the pin plunger models. 3. Actuator None: Pin pl unger 1: Short hinge le ver 2: Hinge le ver 3: Long hinge le ver 4: Sim ulated roller lever 5: Short hinge roller le ver 6: Hinge roller le ver 6. Terminals A: Solder terminals C2: Q uick-connect terminal (#187) C: Q uick-connect terminal (#250) C6: RAST5 terminal (#250) 3 4 521 7 8 9 106

74 Miniature Basic Switch D3V

■Available Combinations Note: 1. ❍: Available model. 2. Consult OMRON for specific models with standard approval. ■List of Models

21 A (OF: 125 gf)

Model D3V-21 D3V-16 D3V-11 D3V-6 D3V-01 Rated current 21 A 16 A 11 A 6 A 0.1 A OF 125 gf 200 gf 100 gf 200 gf 100 gf 50 gf 200 gf 100 gf 50 gf 50 gf 25 gf Heat resistance Contact gap Terminals G 0.5 mm F/G 1 mm or 0.5 mm F/G 1 mm or 0.5 mm F 1 mm G 0.5 mm F 1 mm G 0.5 mm G 0.5 mm F/G 1 mm or 0.5 mm F 1 mm G 0.5 mm G 0.5 mm F/G 1 mm or 0.5 mm Standard (85°C) #187 ❍❍ #250 ❍ ❍❍ RAST5 ❍❍ Standard (105°C) RAST5 ❍❍ EN60695-2-11 approved W2: 85°C #187 ❍❍ #250 ❍❍ EN60695-2-11 approved W2: 105°C #187 ❍ RAST5 ❍ High temperature H: 125°C RAST5 High temperature T: 155°C RAST5 ❍ High temperature T: 200°C RAST5 ❍❍ Actuator Hinge position (far from plunger) Contact form SPDT SPST-NC SPST-NO --- D3V-21G-1@4A-D-Ñ D3V-21G-2@4A-D-Ñ D3V-21G-3@4A-D-Ñ Internal D3V-21G1-1@4A-D-Ñ D3V-21G1-2@4A-D-Ñ D3V-21G1-3@4A-D-Ñ External (M) D3V-21G1M-1@4A-D-Ñ D3V-21G1M-2@4A-D-Ñ D3V-21G1M-3@4A-D-Ñ Internal D3V-21G2-1@4A-D-Ñ D3V-21G2-2@4A-D-Ñ D3V-21G2-3@4A-D-Ñ External (M) D3V-21G2M-1@4A-D-Ñ D3V-21G2M-2@4A-D-Ñ D3V-21G2M-3@4A-D-Ñ Internal D3V-21G3-1@4A-D-Ñ D3V-21G3-2@4A-D-Ñ D3V-21G3-3@4A-D-Ñ External (M) D3V-21G3M-1@4A-D-Ñ D3V-21G3M-2@4A-D-Ñ D3V-21G3M-3@4A-D-Ñ Internal D3V-21G4-1@4A-D-Ñ D3V-21G4-2@4A-D-Ñ D3V-21G4-3@4A-D-Ñ External (M) D3V-21G4M-1@4A-D-Ñ D3V-21G4M-2@4A-D-Ñ D3V-21G4M-3@4A-D-Ñ Internal D3V-21G5-1@4A-D-Ñ D3V-21G5-2@4A-D-Ñ D3V-21G5-3@4A-D-Ñ External (M) D3V-21G5M-1@4A-D-Ñ D3V-21G5M-2@4A-D-Ñ D3V-21G5M-3@4A-D-Ñ Internal D3V-21G6-1@4A-D-Ñ D3V-21G6-2@4A-D-Ñ D3V-21G6-3@4A-D-Ñ External (M) D3V-21G6M-1@4A-D-Ñ D3V-21G6M-2@4A-D-Ñ D3V-21G6M-3@4A-D-Ñ Pin plunger Short hinge lever Hinge lever Long hinge lever Simulated roller lever Short hinge roller lever Hinge roller lever

Miniature Basic Switch D3V 75

16 A (OF: 200 gf)

16 A (OF: 100 gf)

11 A (OF: 200 gf)

• The @ in the model number is for the terminal code. A: Solder/quick-connect terminals (#187) C2: Quick-connect terminals (#187) C: Quick-connect terminals (#250) C6 RAST5 terminals (#250)  The ● in the model number is for the enclosure material None: Standard T: High Temperature (200 °C for D3V-6/-01, 155°C for D3V-11) W2: EN60695-2-11/-12 conformity with PTI=250  The Δ in the model number is for the mounting hole size. None: 3.1 mm K: 2.9 mm  The ∇ in the model number is for the special code None: Standard H: High Temperature (125 °C) E: Special rating of 21A (8)A (for D3V-21 only) Actuator Hinge position (far from plunger) Contact form SPDT SPST-NC SPST-NO Internal D3V-161-1@5-●-D-Ñ D3V-161-2@5-●-D-Ñ D3V-161-3@5-●-D-Ñ External (M) D3V-161M-1@5-●-D-Ñ D3V-161M-2@5-●-D-Ñ D3V-161M-3@5-●-D-Ñ Internal D3V-162-1@5-●-D-Ñ D3V-162-2@5-●-D-Ñ D3V-162-3@5-●-D-Ñ External (M) D3V-162M-1@5-●-D-Ñ D3V-162M-2@5-●-D-Ñ D3V-162M-3@5-●-D-Ñ Internal D3V-163-1@5-●-D-Ñ D3V-163-2@5-●-D-Ñ D3V-163-3@5-●-D-Ñ External (M) D3V-163M-1@5-●-D-Ñ D3V-163M-2@5-●-D-Ñ D3V-163M-3@5-●-D-Ñ Internal D3V-164-1@5-●-D-Ñ D3V-164-2@5-●-D-Ñ D3V-164-3@5-●-D-Ñ External (M) D3V-164M-1@5-●-D-Ñ D3V-164M-2@5-●-D-Ñ D3V-164M-3@5-●-D-Ñ Internal D3V-165-1@5-●-D-Ñ D3V-165-2@5-●-D-Ñ D3V-165-3@5-●-D-Ñ External (M) D3V-165M-1@5-●-D-Ñ D3V-165M-2@5-●-D-Ñ D3V-165M-3@5-●-D-Ñ Internal D3V-166-1@5-●-D-Ñ D3V-166-2@5-●-D-Ñ D3V-166-3@5-●-D-Ñ External (M) D3V-166M-1@5-●-D-Ñ D3V-166M-2@5-●-D-Ñ D3V-166M-3@5-●-D-Ñ Actuator Hinge position (far from plunger) Contact form SPDT SPST-NC SPST-NO Internal D3V-161-1@4-●-D-Ñ D3V-161-2@4-●-D-Ñ D3V-161-3@4-●-D-Ñ External (M) D3V-161M-1@4-●-D-Ñ D3V-161M-2@4-●-D-Ñ D3V-161M-3@4-●-D-Ñ Internal D3V-162-1@4-●-D-Ñ D3V-162-2@4-●-D-Ñ D3V-162-3@4-●-D-Ñ External (M) D3V-162M-1@4-●-D-Ñ D3V-162M-2@4-●-D-Ñ D3V-162M-3@4-●-D-Ñ Internal D3V-163-1@4-●-D-Ñ D3V-163-2@4-●-D-Ñ D3V-163-3@4-●-D-Ñ External (M) D3V-163M-1@4-●-D-Ñ D3V-163M-2@4-●-D-Ñ D3V-163M-3@4-●-D-Ñ Internal D3V-164-1@4-●-D-Ñ D3V-164-2@4-●-D-Ñ D3V-164-3@4-●-D-Ñ External (M) D3V-164M-1@4-●-D-Ñ D3V-164M-2@4-●-D-Ñ D3V-164M-3@4-●-D-Ñ Internal D3V-165-1@4-●-D-Ñ D3V-165-2@4-●-D-Ñ D3V-165-3@4-●-D-Ñ External (M) D3V-165M-1@4-●-D-Ñ D3V-165M-2@4-●-D-Ñ D3V-165M-3@4-●-D-Ñ Internal D3V-166-1@4-●-D-Ñ D3V-166-2@4-●-D-Ñ D3V-166-3@4-●-D-Ñ External (M) D3V-166M-1@4-●-D-Ñ D3V-166M-2@4-●-D-Ñ D3V-166M-3@4-●-D-Ñ Actuator Hinge position (far from plunger) Contact form SPDT SPST-NC SPST-NO Internal D3V-111-1@5-●-D-Ñ D3V-111-2@5-●-D-Ñ D3V-111-3@5-●-D-Ñ External (M) D3V-111M-1@5-●-D-Ñ D3V-111M-2@5-●-D-Ñ D3V-111M-3@5-●-D-Ñ Internal D3V-112-1@5-●-D-Ñ D3V-112-2@5-●-D-Ñ D3V-112-3@5-●-D-Ñ External (M) D3V-112M-1@5-●-D-Ñ D3V-112M-2@5-●-D-Ñ D3V-112M-3@5-●-D-Ñ Internal D3V-113-1@5-●-D-Ñ D3V-113-2@5-●-D-Ñ D3V-113-3@5-●-D-Ñ External (M) D3V-113M-1@5-●-D-Ñ D3V-113M-2@5-●-D-Ñ D3V-113M-3@5-●-D-Ñ Internal D3V-114-1@5-●-D-Ñ D3V-114-2@5-●-D-Ñ D3V-114-3@5-●-D-Ñ External (M) D3V-114M-1@5-●-D-Ñ D3V-114M-2@5-●-D-Ñ D3V-114M-3@5-●-D-Ñ Internal D3V-115-1@5-●-D-Ñ D3V-115-2@5-●-D-Ñ D3V-115-3@5-●-D-Ñ External (M) D3V-115M-1@5-●-D-Ñ D3V-115M-2@5-●-D-Ñ D3V-115M-3@5-●-D-Ñ Internal D3V-116-1@5-●-D-Ñ D3V-116-2@5-●-D-Ñ D3V-116-3@5-●-D-Ñ External (M) D3V-116M-1@5-●-D-Ñ D3V-116M-2@5-●-D-Ñ D3V-116M-3@5-●-D-Ñ Pin plunger Short hinge lever Hinge lever Long hinge lever Simulated roller lever Short hinge roller lever Hinge roller lever Pin plunger Short hinge lever Hinge lever Long hinge lever Simulated roller lever Short hinge roller lever Hinge roller lever Pin plunger Short hinge lever Hinge lever Long hinge lever Simulated roller lever Short hinge roller lever Hinge roller lever

76 Miniature Basic Switch D3V

11 A (OF: 100 gf)

11 A (OF: 50 gf)

6 A (OF: 100 gf)

 The @ in the model number is for the terminal code. A: Solder/quick-connect terminals (#187) C2: Quick-connect terminals (#187) C: Quick-connect terminals (#250) C6 RAST5 terminals (#250)  The ● in the model number is for the enclosure material None: Standard T: High Temperature (200 °C for D3V-6/-01, 155°C for D3V-11) W2: EN60695-2-11/-12 conformity with PTI=250  The Δ in the model number is for the mounting hole size. None: 3.1 mm K: 2.9 mm  The ∇ in the model number is for the special code None: Standard H: High Temperature (125 °C) E: Special rating of 21A (8)A (for D3V-21 only) Actuator Hinge position (far from plunger) Contact form SPDT SPST-NC SPST-NO Internal D3V-111-1@4-●-D-Ñ D3V-111-2@4-●-D-Ñ D3V-111-3@4-●-D-Ñ External (M) D3V-111M-1@4-●-D-Ñ D3V-111M-2@4-●-D-Ñ D3V-111M-3@4-●-D-Ñ Internal D3V-112-1@4-●-D-Ñ D3V-112-2@4-●-D-Ñ D3V-112-3@4-●-D-Ñ External (M) D3V-112M-1@4-●-D-Ñ D3V-112M-2@4-●-D-Ñ D3V-112M-3@4-●-D-Ñ Internal D3V-113-1@4-●-D-Ñ D3V-113-2@4-●-D-Ñ D3V-113-3@4-●-D-Ñ External (M) D3V-113M-1@4-●-D-Ñ D3V-113M-2@4-●-D-Ñ D3V-113M-3@4-●-D-Ñ Internal D3V-114-1@4-●-D-Ñ D3V-114-2@4-●-D-Ñ D3V-114-3@4-●-D-Ñ External (M) D3V-114M-1@4-●-D-Ñ D3V-114M-2@4-●-D-Ñ D3V-114M-3@4-●-D-Ñ Internal D3V-115-1@4-●-D-Ñ D3V-115-2@4-●-D-Ñ D3V-115-3@4-●-D-Ñ External (M) D3V-115M-1@4-●-D-Ñ D3V-115M-2@4-●-D-Ñ D3V-115M-3@4-●-D-Ñ Internal D3V-116-1@4-●-D-Ñ D3V-116-2@4-●-D-Ñ D3V-116-3@4-●-D-Ñ External (M) D3V-116M-1@4-●-D-Ñ D3V-116M-2@4-●-D-Ñ D3V-116M-3@4-●-D-Ñ Actuator Hinge position (far from plunger) Contact form SPDT SPST-NC SPST-NO --- D3V-11G-1@3-●-D-Ñ D3V-11G-2@3-●-D-Ñ D3V-11G-3@3-●-D-Ñ Internal D3V-11G1-1@3-●-D-Ñ D3V-11G1-2@3-●-D-Ñ D3V-11G1-3@3-●-D-Ñ External (M) D3V-11G1M-1@3-●-D-Ñ D3V-11G1M-2@3-●-D-Ñ D3V-11G1M-3@3-●-D-Ñ Internal D3V-11G2-1@3-●-D-Ñ D3V-11G2-2@3-●-D-Ñ D3V-11G2-3@3-●-D-Ñ External (M) D3V-11G2M-1@3-●-D-Ñ D3V-11G2M-2@3-●-D-Ñ D3V-11G2M-3@3-●-D-Ñ Internal D3V-11G3-1@3-●-D-Ñ D3V-11G3-2@3-●-D-Ñ D3V-11G3-3@3-●-D-Ñ External (M) D3V-11G3M-1@3-●-D-Ñ D3V-11G3M-2@3-●-D-Ñ D3V-11G3M-3@3-●-D-Ñ Internal D3V-11G4-1@3-●-D-Ñ D3V-11G4-2@3-●-D-Ñ D3V-11G4-3@3-●-D-Ñ External (M) D3V-11G4M-1@3-●-D-Ñ D3V-11G4M-2@3-●-D-Ñ D3V-11G4M-3@3-●-D-Ñ Internal D3V-11G5-1@3-●-D-Ñ D3V-11G5-2@3-●-D-Ñ D3V-11G5-3@3-●-D-Ñ External (M) D3V-11G5M-1@3-●-D-Ñ D3V-11G5M-2@3-●-D-Ñ D3V-11G5M-3@3-●-D-Ñ Internal D3V-11G6-1@3-●-D-Ñ D3V-11G6-2@3-●-D-Ñ D3V-11G6-3@3-●-D-Ñ External (M) D3V-11G6M-1@3-●-D-Ñ D3V-11G6M-2@3-●-D-Ñ D3V-11G6M-3@3-●-D-Ñ Actuator Hinge position (far from plunger) Contact form SPDT SPST-NC SPST-NO Internal D3V-61-1@4-●-D-Ñ D3V-61-2@4-●-D-Ñ D3V-61-3@4-●-D-Ñ External (M) D3V-61M-1@4-●-D-Ñ D3V-61M-2@4-●-D-Ñ D3V-61M-3@4-●-D-Ñ Internal D3V-62-1@4-●-D-Ñ D3V-62-2@4-●-D-Ñ D3V-62-3@4-●-D-Ñ External (M) D3V-62M-1@4-●-D-Ñ D3V-62M-2@4-●-D-Ñ D3V-62M-3@4-●-D-Ñ Internal D3V-63-1@4-●-D-Ñ D3V-63-2@4-●-D-Ñ D3V-63-3@4-●-D-Ñ External (M) D3V-63M-1@4-●-D-Ñ D3V-63M-2@4-●-D-Ñ D3V-63M-3@4-●-D-Ñ Internal D3V-64-1@4-●-D-Ñ D3V-64-2@4-●-D-Ñ D3V-64-3@4-●-D-Ñ External (M) D3V-64M-1@4-●-D-Ñ D3V-64M-2@4-●-D-Ñ D3V-64M-3@4-●-D-Ñ Internal D3V-65-1@4-●-D-Ñ D3V-65-2@4-●-D-Ñ D3V-65-3@4-●-D-Ñ External (M) D3V-65M-1@4-●-D-Ñ D3V-65M-2@4-●-D-Ñ D3V-65M-3@4-●-D-Ñ Internal D3V-66-1@4-●-D-Ñ D3V-66-2@4-●-D-Ñ D3V-66-3@4-●-D-Ñ External (M) D3V-66M-1@4-●-D-Ñ D3V-66M-2@4-●-D-Ñ D3V-66M-3@4-●-D-Ñ Pin plunger Short hinge lever Hinge lever Long hinge lever Simulated roller lever Short hinge roller lever Hinge roller lever Pin plunger Short hinge lever Hinge lever Long hinge lever Simulated roller lever Short hinge roller lever Hinge roller lever Pin plunger Short hinge lever Hinge lever Long hinge lever Simulated roller lever Short hinge roller lever Hinge roller lever

Miniature Basic Switch D3V 77

6 A (OF: 50 gf)

01 A (OF: 50 gf)

01 A (OF: 25 gf)

 The @ in the model number is for the terminal code. A: Solder/quick-connect terminals (#187) C2: Quick-connect terminals (#187) C: Quick-connect terminals (#250) C6 RAST5 terminals (#250)  The ● in the model number is for the enclosure material None: Standard T: High Temperature (200 °C for D3V-6/-01, 155°C for D3V-11) W2: EN60695-2-11/-12 conformity with PTI=250  The Δ in the model number is for the mounting hole size. None: 3.1 mm K: 2.9 mm  The ∇ in the model number is for the special code None: Standard H: High Temperature (125 °C) E: Special rating of 21A (8)A (for D3V-21 only) Actuator Hinge position (far from plunger) Contact form SPDT SPST-NC SPST-NO --- D3V-6G-1@3-●-D-Ñ D3V-6G-2@3-●-D-Ñ D3V-6G-3@3-●-D-Ñ Internal D3V-6G1-1@3-●-D-Ñ D3V-6G1-2@3-●-D-Ñ D3V-6G1-3@3-●-D-Ñ External (M) D3V-6G1M-1@3-●-D-Ñ D3V-6G1M-2@3-●-D-Ñ D3V-6G1M-3@3-●-D-Ñ Internal D3V-6G2-1@3-●-D-Ñ D3V-6G2-2@3-●-D-Ñ D3V-6G2-3@3-●-D-Ñ External (M) D3V-6G2M-1@3-●-D-Ñ D3V-6G2M-2@3-●-D-Ñ D3V-6G2M-3@3-●-D-Ñ Internal D3V-6G3-1@3-●-D-Ñ D3V-6G3-2@3-●-D-Ñ D3V-6G3-3@3-●-D-Ñ External (M) D3V-6G3M-1@3-●-D-Ñ D3V-6G3M-2@3-●-D-Ñ D3V-6G3M-3@3-●-D-Ñ Internal D3V-6G4-1@3-●-D-Ñ D3V-6G4-2@3-●-D-Ñ D3V-6G4-3@3-●-D-Ñ External (M) D3V-6G4M-1@3-●-D-Ñ D3V-6G4M-2@3-●-D-Ñ D3V-6G4M-3@3-●-D-Ñ Internal D3V-6G5-1@3-●-D-Ñ D3V-6G5-2@3-●-D-Ñ D3V-6G5-3@3-●-D-Ñ External (M) D3V-6G5M-1@3-●-D-Ñ D3V-6G5M-2@3-●-D-Ñ D3V-6G5M-3@3-●-D-Ñ Internal D3V-6G6-1@3-●-D-Ñ D3V-6G6-2@3-●-D-Ñ D3V-6G6-3@3-●-D-Ñ External (M) D3V-6G6M-1@3-●-D-Ñ D3V-6G6M-2@3-●-D-Ñ D3V-6G6M-3@3-●-D-Ñ Actuator Hinge position (far from plunger) Contact form SPDT SPST-NC SPST-NO Internal D3V-011-1@3-●-D-Ñ D3V-011-2@3-●-D-Ñ D3V-011-3@3-●-D-Ñ External (M) D3V-011M-1@3-●-D-Ñ D3V-011M-2@3-●-D-Ñ D3V-011M-3@3-●-D-Ñ Internal D3V-012-1@3-●-D-Ñ D3V-012-2@3-●-D-Ñ D3V-012-3@3-●-D-Ñ External (M) D3V-012M-1@3-●-D-Ñ D3V-012M-2@3-●-D-Ñ D3V-012M-3@3-●-D-Ñ Internal D3V-013-1@3-●-D-Ñ D3V-013-2@3-●-D-Ñ D3V-013-3@3-●-D-Ñ External (M) D3V-013M-1@3-●-D-Ñ D3V-013M-2@3-●-D-Ñ D3V-013M-3@3-●-D-Ñ Internal D3V-014-1@3-●-D-Ñ D3V-014-2@3-●-D-Ñ D3V-014-3@3-●-D-Ñ External (M) D3V-014M-1@3-●-D-Ñ D3V-014M-2@3-●-D-Ñ D3V-014M-3@3-●-D-Ñ Internal D3V-015-1@3-●-D-Ñ D3V-015-2@3-●-D-Ñ D3V-015-3@3-●-D-Ñ External (M) D3V-015M-1@3-●-D-Ñ D3V-015M-2@3-●-D-Ñ D3V-015M-3@3-●-D-Ñ Internal D3V-016-1@3-●-D-Ñ D3V-016-2@3-●-D-Ñ D3V-016-3@3-●-D-Ñ External (M) D3V-016M-1@3-●-D-Ñ D3V-016M-2@3-●-D-Ñ D3V-016M-3@3-●-D-Ñ Actuator Hinge position (far from plunger) Contact form SPDT SPST-NC SPST-NO Pin plunger Short hinge lever Hinge lever Long hinge lever Simulated roller lever Short hinge roller lever Hinge roller lever Pin plunger Short hinge lever Hinge lever Long hinge lever Simulated roller lever Short hinge roller lever Hinge roller lever Pin plunger

78 Miniature Basic Switch D3V

■Ratings Note: 1. The above current values are the normal current values of models with a contact gap of 1 mm (gap F), which vary with the normal current values of models with a contact gap of 0.5 mm (gap G). 3. Lamp load has an inrush current of 10 times the steady-state current. 4. Motor load has an inrush current of 6 times the steady-state current. 5. The ratings values apply under the following test conditions: Ambient temperature: 20±2°C, Ambient humidity: 65±5%, Operating frequency: 30 operations/min ■Approved Standards UL1054 (File No. E41515) CSA C22.2 No.55 (File No. LR21642) (Only standard ratings are listed.) EN 61058-1: 1992+A1: 1993 (License No. 119151L) Testing conditions: 50,000 operations, T85 (0°C to 85°C) for D3V-21/D3V-01, T105 (0°C to 105°C) for D3V-16/D3V-11/D3V-6 and T200 (0 to 200°C) for D3V-6/-01 with suffix “T”, T155 (0 to 155°C) for D3V-11 with suffix “T”. **Testing conditions: 10,000 operations, T85 (0°C to 85°C) EN 60695-2-11 Ed.2, EN 60695-2-12 Ed.2 - - Glow-wire flammability test methods Type Rated voltage Non-inductive load Inductive load Resistive load Lamp load Inductive load Motor load NC NO NC NO NC NO NC NO D3V-21 250 VAC 21 A 3 A 12 A 4 A

8 VDC

30 VDC

125 VDC

250 VDC

0.6 A 0.3 A 5 A 5 A 0.1 A 0.05 A 12 A 12 A 0.6 A 0.3 A 7 A 5 A 0.1 A 0.05 A D3V-16 250 VAC 16 A 2 A 10 A 3 A 0.6 A 0.3 A 4 A 4 A 0.1 A 0.05 A 10 A 10 A 0.6 A 0.3 A 6 A 4 A 0.1 A 0.05 A D3V-11 250 VAC 11 A 1.5 A 6 A 2 A 0.6 A 0.3 A 3 A 3 A 0.1 A 0.05 A 6 A 6 A 0.6 A 0.3 A 3 A 3 A 0.1 A 0.05 A D3V-6 250 VAC 6 A 3 A 4 A --- 0.4 A 0.3 A 3 A 3 A 0.1 A 0.05 A 4 A 4 A 0.4 A 0.2 A --- 0.1 A

0.1 A --- --- ---

Rated voltage D3V-21G D3V-16 D3V-16G D3V-11 D3V-11G D3V-6 D3V-6G D3V-01 125 VAC 3/4 HP 16 A, 1/2 HP 16 A, 1/2 HP 11 A, 1/2 HP 11 A, 1/2 HP 6 A, 1/4 HP 6 A, 1/4 HP 0.1 A 250 VAC 20.1 A, 3/4 HP 16 A, 1/2 HP 16 A, 1/2 HP 11 A, 1/2 HP 11 A, 1/2 HP 6 A, 1/4 HP 6 A, 1/4 HP --- Rated voltage D3V-21G D3V-16 D3V-11 D3V-6 D3V-01

250 VAC 20 (4) A 16 (3) A 11 (3) A 6 (2) A ---

250 VAC 21 (8) A**

Rated voltage D3V-16 D3V-11 D3V-6 D3V-01

250 VAC 16 (3) A 11 (3) A 6 (2) A ---

Miniature Basic Switch D3V 79 ■Characteristics Note: 1. Data shown are of initial value. 2. The dielectric strength values shown in the table are for models with a Separator. 3. For plunger models, the above values apply for use at both the free position and total travel position. For lever models, they apply at the total travel position. 4. For testing conditions, contact your OMRON sales representative. ■Contact Specifications Note: Minimum applicable loads are indicated by N standard reference values. This value represents the failure rate at a 60% (λ60) reliability level (JIS C5003). The equation λ60=0.5 x 10-6 / operations indicates that a failure rate of 1/2,000,000 operations can be expected at a reliability level of 60% ■Contact Form Operating speed 0.1 mm to 1 m/s (plunger models) Operating frequency Mechanical: 600 operations/min Electrical: 60 operations/min Insulation resistance 100 MΩ min. (at 500 VDC) Contact resistance D3V-21: 50 m Ω max. D3V-16, D3V-11, D3V-6: 30 m Ω max. D3V-01, 50 gf versions: 50 m Ω max. 25 gf versions: 100 m Ω max. Dielectric strength (see note 2) 1,000 VAC, 50/60 Hz for 1 min between terminals of the same polarity 2,000 VAC, 50/60 Hz for 1 min between current-carrying metal parts and ground, and between each terminal and non-current-carrying metal parts Vibration resistance (see note 3) Malfunction: 10 to 55 Hz, 1.5-mm double amplitude Shock resistance (see note 3) Destruction: 400 m/s 2 (approx. 40G) max. Malfunction: 100 m/s2 (approx. 10G) max. Life expectancy Mechanical: 10,000,000 operations min. Electrical: D3V-21: 50,000 operations min. D3V-16: 100,000 operations min. D3V-11: 200,000 operations min. D3V-6, D3V-01: 500,000 operations min. Degree of protection IEC IP40 Degree of protection against electric shock Class I Proof tracking index (PTI) 250 (High Temperature type with suffix “-T”: 175) Ambient operating temperature D3V-21: -25 °C to 85°C with no icing D3V-16: -25 °C to 105°C (High Temperature type “H”: -25°C to 125°C) with no icing D3V-11: -25 °C to 105°C (High Temperature types “H”: -25°C to 125°C, “T”: -25°C to 155°C) with no icing D3V-6: -25 °C to 105°C (High Temperature types “H”: -25°C to 125°C, “T”: -25°C to 200°C) with no icing D3V-01: -25 °C to 85°C (High Temperature type “T”: -25°C to 200°C) with no icing Ambient operating humidity 85% max. (for 5°C to 35°C) Weight Approx. 6.2 g (plunger models) Item D3V-21 D3V-16 D3V-11 D3V-6 D3V-01 Contact Specification Rivet Crossbar Material Silver alloy Gold alloy Gap (standard value) 0.5 mm 1 mm (F gap type) or 0.5 mm (G gap type) 1.0 mm Inrush current NC 50 A max. 40 A max. 24 A max. 15 A max. ---NO Minimum applicable load 160 mA at 5 VDC 1 mA at 5 VDCSPDT SPST-NC SPST-NO COM NC NO COM NC COM NO

80 Miniature Basic Switch D3V

■Terminals Note: Unless otherwise specified, all units are in millimeters and a tolerance of ±0.4 mm applies to all dimensions Note: The table above is for the SPDT contact specifications. Two terminals will be available for SPST-NO or SPST -NC contact specifications. For terminal positions, refer to the above Contact Form. ■Mounting Holes All switches may be panel mounted using M3 mounting screws with plane washers or spring washers to securely mount the switch. Tighten the screws to a torque of 0.39 to 0.59 N·m. ■Dimensions and Operating Characteristics Note: 1. Unless otherwise specified, all units are in millimeters and a tolerance of ±0.4 mm applies to all dimensions 2. The following illustrations and drawings are for quick-connect terminals (#187) (terminals C2). D3V models also incorporate terminals A, C, and C6, which are omitted from the following drawings. Refer to Ter minals section for the dimensions of these terminals. 3. The @ in the model number is for the terminal code. 4. The Δ in the model number is for combinations of the enclosure material, the mounting hole size and the special code as indicated in the Model Number Legend and Available Combinations tables. The hole size in the following illustrations of models with a suffix “K” in the Δ is 2.9 mm. 5. The operating characteristics are for operation in the A direction ( ). Plunger Models Terminal type Solder Terminal (A) Quick-connect Terminal (#187) (C2) Quick-connect Terminal (#250) (C) Quick-connect RAST5 Terminals (#250)(C6) COM Terminal dimensions t = 0.5 Three, solder terminals (10) 2.9 (6.5) (5.5) t = 0.5 Three, quick-connect terminals (#187) (10) 2.9 (6.5) (5.5) t = 0.8 Three, quick-connect terminals (#250) (12.0) 3.2 (7.7) (4.9) 12.8 t=0.8 Three quick connect terminals (#250) 16.8 (3.5) 5 15.2 1.6 dia.2.4 dia. 4.75±0.1 6.35 3.2 (see note) Note: Indicates the length to the center of the 1.6-dia. holes 1.6-dia. terminal hole 4.75±0.1 3.2 6.35 1.65-dia. terminal hole 6.35±0.1 3.95 1.75-dia. terminal hole 4.5 6.3±0.1 Two, 3.1-dia. mounting holes or M3 screw holes 10.3±0.1 22.2±0.1 Model D3V-21G-1@4A-Δ D3V-16-1@5-Δ D3V-11-1@5-Δ D3V-11-1@4-Δ D3V-6-1@4-Δ D3V-6G-1@3-Δ D3V-01-1@3-Δ D3V-01-1@2-Δ OF max. RF min. 125 gf 20 gf 200 gf 50 gf 100 gf 15 gf 50 gf 5 gf 50 gf 5 gf 25 gf 3 gf PT max. OT min. MD max. 1.2 mm 1.0 mm 0.3 mm 1.2 mm 1.0 mm 0.4 mm (F gap type) or 0.3 mm (G gap type) 1.2 mm 1.0 mm 0.4 mm OP 14.7 ±0.4 mm D3V-21G-1@4A-Δ D3V-16-1@5-Δ D3V-11-1@5-Δ D3V-11-1@4-Δ D3V-6-1@4-Δ D3V-6G-1@3-Δ D3V-01-1@2-Δ D3V-01-1@3-Δ t=0.5 Three, quick-connect terminals (#187)

Miniature Basic Switch D3V 81 Short Hinge Lever Models D3V-21G1-1@4A-Δ D3V-161-1@5-Δ D3V-111-1@5-Δ D3V-111-1@4-Δ D3V-61-1@4-Δ D3V-6G1-1@3-Δ D3V-011-1@3-Δ 4.2 10.3 2.85 PT 22.1 8.1 1.63.1 dia. hole+0.13 −0.03 0.7 7.218.7 15.9 t=0.5 Three, #187 series tab 2.8 (10) 27.8 37.8±0.8 3.4±0.15 dia. hole 22.2±0.1 3.1+0.13 −0.03 10.3±0.1 OP 2.8 t=0.5 Note: Stainless-steel lever D3V-21G1M-1@4A-Δ D3V-161M-1@5-Δ D3V-111M-1@5-Δ D3V-111M-1@4-Δ D3V-61M-1@4-Δ D3V-6G1M-1@3-Δ D3V-011M-1@3-Δ t=0.5 Three, quick-connect terminals (#187) Model D3V-21G1(M)-1 @4A-Δ D3V-161(M)-1@5-Δ D3V-111(M)-1@5-Δ D3V-111(M)-1@4-Δ D3V-61(M)-1@4-Δ D3V-6G1(M)-1@3-Δ D3V-011(M)-1@3-Δ OF max. RF min. 125 gf 20 gf 200 gf 50 gf 100 gf 15 gf 50 gf 5 gf PT max. OT min. MD max. 1.6 mm 0.8 mm 0.5 mm 1.6 mm 0.8 mm 0.6 mm (F gap type) or 0.5 mm (G gap type) 1.6 mm 0.8 mm 0.6 mm OP 15.2 ± 0.5 mm D3V-21G1K-1@4A-Δ D3V-161K-1@5-Δ D3V-111K-1@5-Δ D3V-111K-1@4-Δ D3V-61K-1@4-Δ D3V-6G1K-1@3-Δ D3V-011K-1@3-Δ 4.5 10.3 2.85PT 27.9±0.8 14.3 8.5 1.63.1 dia. hole+0.13 −0.03 0.7 7.218.7 15.9 2.8 (10) 27.8 37.8±0.8 3.4±0.15 dia. hole 22.2±0.1 3.1 +0.13 −0.03 10.3±0.1 OP 2.8 t=0.5 t=0.5 Three, #187 series tab Model D3V-21G1K-1 @4A-Δ D3V-161K-1@5-Δ D3V-111K-1@5-Δ D3V-111K-1@4-Δ D3V-61K-1@4-Δ D3V-6G1K-1@3-Δ D3V-011K-1@3-Δ OF max. RF min. 85 gf 8 gf 130 gf 16 gf 65 gf 8 gf 35 gf 4 gf PT max. OT min. MD max. 3.5 mm 1.1 mm 1.1 mm 3.5 mm 1.1 mm 1.2 mm (F gap type) or 1.1 mm (G gap type) 3.5 mm 1.1 mm 1.2 mm OP 15.2 ± 1.2 mm

82 Miniature Basic Switch D3V

D3V-21G2-1@4A-Δ D3V-162-1@5-Δ D3V-112-1@5-Δ D3V-112-1@4-Δ D3V-62-1@4-Δ D3V-6G2-1@3-Δ D3V-012-1@3-Δ 4.2 10.3 2.85PT 35.6±0.8 8.1 1.63.1 dia. hole+0.13 −0.03 0.7 7.218.8 15.9 t=0.5 Three, #187 series tab 2.8 (10) 27.8 37.8±0.8 3.4±0.15 dia. hole 22.2±0.1 3.1+0.13 −0.03 10.3±0.1 OP 2.8 t=0.5 t=0.5 Three, quick-connect terminals (#187) Note: Stainless-steel lever D3V-21G2M-1@4A-Δ D3V-162M-1@5-Δ D3V-112M-1@5-Δ D3V-112M-1@4-Δ D3V-62M-1@4-Δ D3V-6G2M-1@3-Δ D3V-012M-1@3-Δ Model D3V-21G2(M)-1 @4A-Δ D3V-162(M)-1@5-Δ D3V-112(M)-1@5-Δ D3V-112(M)-1@4-Δ D3V-62(M)-1@4−Δ D3V-6G2(M)-1@3-Δ D3V-012(M)-1@3-Δ OF max. RF min. 80 gf 6 gf 125 gf 14 gf 60 gf 6 gf 30 gf - - - PT max. OT min. MD max. 4.0 mm 1.6 mm 0.8 mm 4.0 mm 1.6 mm 1.5 mm (F gap type) or 0.8 mm (G gap type) 4.0 mm 1.6 mm 1.5 mm OP 15.2 ± 1.2 mm D3V-21G2K-1@4A-Δ D3V-162K-1@5-Δ D3V-112K-1@5-Δ D3V-112K-1@4-Δ D3V-62K-1@4-Δ D3V-6G2K-1@3-Δ D3V-012K-1@3-Δ 4.5 10.3 2.85PT 41.4±0.8 14.3 8.5 1.63.1 dia. hole+0.13 −0.03 0.7 7.218.7 15.9 t=0.5 Three, #187 series tab 2.8 (10) 27.8 37.8±0.8 3.4±0.15 dia. hole 22.2±0.1 3.1+0.13−0.03 10.3±0.1 OP 2.8 t=0.5 Model D3V-21G2K-1 @4A-Δ D3V-162K-1@5-Δ D3V-112K-1@5-Δ D3V-112K-1@4-Δ D3V-62K-1@4-Δ D3V-6G2K-1@3-Δ D3V-012K-1@3-Δ OF max. RF min. 45 gf 4 gf 70 gf 8 gf 35 gf 4 gf 20 gf - - - PT max. OT min. MD max. 6.0 mm 2.5 mm 1.3 mm 6.0 mm 2.5 mm 2.0 mm (F gap type) or 1.3 mm (G gap type) 6.0 mm 2.5 mm 2.0 mm OP 15.2 ± 2.0 mm

Miniature Basic Switch D3V 83 Long Hinge Lever Models D3V-21G3-1@4A-Δ D3V-163-1@5-Δ D3V-113-1@5-Δ D3V-113-1@4-Δ D3V-63-1@4-Δ D3V-6G3-1@3-Δ D3V-013-1@3-Δ 4.2 10.3 2.85 PT 59.4±0.8 8.1 1.63.1 dia. hole+0.13 −0.03 0.7 7.218.7 15.9 t=0.5 Three, #187 series tab 2.8 (10) 27.8 37.8±0.8 3.4±0.15 dia. hole 22.2±0.1 3.1 +0.13 −0.03 10.3±0.1 OP 2.8 t=0.5 t=0.5 Three, quick-connect terminals (#187) Note: Stainless-steel lever D3V-21G3M-1@4A-Δ D3V-163M-1@5-Δ D3V-113M-1@5-Δ D3V-113M-1@4-Δ D3V-63M-1@4-Δ D3V-6G3M-1@3-Δ D3V-013M-1@3-Δ Model D3V-21G3(M)-1@4A- D D3V-163(M)-1@5-D D3V-113(M)-1@5-D D3V-113(M)-1@4-D D3V-63(M)-1@4-D D3V-6G3(M)-1@3-D D3V-013(M)-1@3-D OF max. RF min. 45 gf 3 gf 70 gf 6 gf 35 gf --- 20 gf --- PT max. OT min. MD max. 9.0 mm 2.0 mm 2.0 mm 9.0 mm 2.0 mm 2.8 mm (F gap type) or 2.0 mm (G gap type) 9.0 mm 3.2 mm 2.8 mm (F gap type) or 2.0 mm (G gap type) 9.0 mm 3.2 mm 2.8 mm OP 15.2 ± 2.6 mm 15.2 mm+2.6 −3.2 D3V-21G3K-1@4A-Δ D3V-163K-1@5-Δ D3V-113K-1@5-Δ D3V-113K-1@4-Δ D3V-63K-1@4-Δ D3V-6G3K-1@3-Δ D3V-013K-1@3-Δ 4.5 10.3 2.85PT 65.2±0.8 14.3 8.5 1.63.1 dia. hole+0.13 −0.03 0.7 7.218.7 15.9 t=0.5 Three, #187 series tab 2.8 (10) 27.8 37.8±0.8 3.4±0.15 dia. hole 22.2±0.1 3.1+0.13 −0.03 10.3±0.1OP 2.8 t=0.5 Model D3V-21G3K-1@4A-D D3V-163K-1@5-D D3V-113K-1@5-D D3V-113K-1@4-D D3V-63K-1@4-D D3V-6G3K-1@3-D D3V-013K-1@3-D OF max. RF min. 20 gf - - - 35 gf 4 gf 20 gf --- 10 gf --- PT max. OT min. MD max. 15.0 mm 4.0 mm 3.0 mm 15.0 mm 4.0 mm 3.8 mm (F gap type) or 3.0 mm (G gap type) 15.0 mm 4.0 mm 3.8 mm OP 15.2 ± 3.0 mm

84 Miniature Basic Switch D3V

Simulated Roller Lever Models D3V-21G4-1@4A-Δ D3V-164-1@5-Δ D3V-114-1@5-Δ D3V-114-1@4-Δ D3V-64-1@4-Δ D3V-6G4-1@3-Δ D3V-014-1@3-Δ 4.2 10.3 2.85PT32.5±0.8 8.1 1.63.1 dia. hole+0.13 −0.03 0.7 7.218.815.9 t=0.5 Three, #187 series tab 2.8 (10) 27.8 37.8±0.8 3.4±0.15 dia. hole 22.2±0.1 3.1+0.13 −0.03 10.3±0.1 OP 2.8 t=0.5 t=0.5 Three, quick-connect terminals (#187) Note: Stainless-steel lever D3V-21G4M-1@4A-Δ D3V-164M-1@5-Δ D3V-114M-1@5-Δ D3V-114M-1@4-Δ D3V-64M-1@4-Δ D3V-6G4M-1@3-Δ D3V-014M-1@3-Δ Model D3V-21G4(M)-1 @4A-Δ D3V-164(M)-1@5-Δ D3V-114(M)-1@5-Δ D3V-114(M)-1@4-Δ D3V-64(M)-1@4-Δ D3V-6G4(M)-1@3-Δ D3V-014(M)-1@3-Δ OF max. RF min. 85 gf 7 gf 125 gf 14 gf 60 gf 6 gf 30 gf --- PT max. OT min. MD max. 4.0 mm 1.6 mm 1.4 mm 4.0 mm 1.6 mm 1.5 mm (F gap type) or 0.8 mm (G gap type) 4.0 mm 1.6 mm 1.5 mm OP 18.7 ± 1.2 mm D3V-21G4K-1@4A-Δ D3V-164K-1@5-Δ D3V-114K-1@5-Δ D3V-114K-1@4-Δ D3V-64K-1@4-Δ D3V-6G4K-1@3-Δ D3V-014K-1@3-Δ 4.5 10.3 2.85PT38.4±0.8 14.3 8.5 1.63.1 dia. hole+0.13 −0.03 0.7 7.218.7 15.9 t=0.5 Three, #187 series tab 2.8 (10) 27.8 37.8±0.8 3.4±0.15 dia. hole 22.2±0.1 3.1 +0.13 −0.03 10.3±0.1 OP2.8 t=0.5 Model D3V-21G4K-1@4A-D D3V-164K-1@5-D D3V-114K-1@5-D D3V-114K-1@4-D D3V-64K-1@4-D D3V-6G4K-1@3-D D3V-014K-1@3-D OF max. RF min. 55 gf 3 gf 75 gf 10 gf 40 gf 3 gf 20 gf --- PT max. OT min. MD max. 8.0 mm 1.5 mm 3.0 mm 8.0 mm 1.5 mm 3.5 mm (F gap type) or 3.0 mm (G gap type) 8.0 mm 1.5 mm 3.5 mm OP 18.7 ± 1.2 mm

Miniature Basic Switch D3V 85 Short Hinge Roller Lever Models D3V-21G5-1@4A-Δ D3V-165-1@5-Δ D3V-115-1@5-Δ D3V-115-1@4-Δ D3V-65-1@4-Δ D3V-6G5-1@3-Δ D3V-015-1@3-Δ 4.8 10.3 5.1PT20.1±0.8 8.1 1.63.1 dia. hole+0.13 −0.03 0.7 7.218.815.9 t=0.5 Three, #187 series tab 2.8 (10) 27.8 37.8±0.8 3.4±0.15 dia. hole 22.2±0.1 3.1+0.13 −0.03 10.3±0.1 OP2.8 t=0.5 t=0.5 Three, quick-connect terminals (#187) Note: 1. Stainless-steel lever 2. Oilless polyacetar resin roller D3V-21G5M-1@4A-Δ D3V-165M-1@5-Δ D3V-115M-1@5-Δ D3V-115M-1@4-Δ D3V-65M-1@4-Δ D3V-6G5M-1@3-Δ D3V-015M-1@3-Δ Model D3V-21G5(M)-1 @4A-Δ D3V-165(M)-1@5-Δ D3V-115(M)-1@5-Δ D3V-115(M)-1@4-Δ D3V-65(M)-1@4-Δ D3V-6G5(M)-1@3-Δ D3V-015(M)-1@3-Δ OF max. RF min. 145 gf 20 gf 240 gf 50 gf 120 gf 15 gf 60 gf 6 gf PT max. OT min. MD max. 1.6 mm 0.8 mm 0.5 mm 1.6 mm 0.8 mm 0.6 mm (F gap type) or 0.5 mm (G gap type) 1.6 mm 0.8 mm 0.6 mm OP 20.7 ±0.6 mm D3V-21G5K-1@4A-Δ D3V-165K-1@5-Δ D3V-115K-1@5-Δ D3V-115K-1@4-Δ D3V-65K-1@4-Δ D3V-6G5K-1@3-Δ D3V-015K-1@3-Δ 5.1 10.3 PT25.9±0.8 14.3 −0.03 0.7 7.218.815.9 t=0.5 Three, #187 series tab 2.8 (10) 27.8 37.8±0.8 3.4±0.15 dia. hole 22.2±0.1 3.1 +0.13 −0.03 10.3±0.1 OP2.8 t=0.5 Model D3V-21G5K-1@4A-D D3V-165K-1@5-D D3V-115K-1@5-D D3V-115K-1@4-D D3V-65K-1@4-D D3V-6G5K-1@3-D D3V-015K-1@3-D OF max. RF min. 100 gf 8 gf 160 gf 15 gf 80 gf 8 gf 40 gf 4 gf PT max. OT min. MD max. 2.6 mm 1.0 mm 8.0 mm 2.6 mm 1.0 mm 0.9 mm (F gap type) or 0.8 mm (G gap type) 2.6 mm 1.0 mm 0.9 mm OP 20.7 ± 1.0 mm

86 Miniature Basic Switch D3V

D3V-21G6-1@4A-Δ D3V-166-1@5-Δ D3V-116-1@5-Δ D3V-116-1@4-Δ D3V-66-1@4-Δ D3V-6G6-1@3-Δ D3V-016-1@3-Δ 4.8 10.3 5.1PT33.0±0.8 8.1 1.63.1 dia. hole+0.13 −0.03 0.7 7.218.7 15.9 t=0.5 Three, #187 series tab 2.8 (10) 27.8 37.8±0.8 3.4±0.15 dia. hole 22.2±0.1 3.1 +0.13 −0.03 10.3±0.1 OP2.8 t=0.5 t=0.5 Three, quick-connect terminals (#187) Note: 1. Stainless-steel lever 2. Oilless polyacetar resin roller D3V-21G6M-1@4A-Δ D3V-166M-1@5-Δ D3V-116M-1@5-Δ D3V-116M-1@4-Δ D3V-66M-1@4-Δ D3V-6G6M-1@3-Δ D3V-016M-1@3-Δ Model D3V-21G6(M)-1 @4A-Δ D3V-166(M)-1@5-Δ D3V-116(M)-1@5-Δ D3V-116(M)-1@4-Δ D3V-66(M)-1@4-Δ D3V-6G6(M)-1@3-Δ D3V-016(M)-1@3-Δ OF max. RF min. 80 gf 5 gf 125 gf 14 gf 60 gf 6 gf 30 gf --- PT max. OT min. MD max. 4.0 mm 1.6 mm 0.8 mm 4.0 mm 1.6 mm 1.5 mm (F gap type) or 0.8 mm (G gap type) 4.0 mm 1.6 mm 1.5 mm OP 20.7±1.2 mm D3V-21G6K-1@4A-Δ D3V-166K-1@5-Δ D3V-116K-1@5-Δ D3V-116K-1@4-Δ D3V-66K-1@4-Δ D3V-6G6K-1@3-Δ D3V-016K-1@3-Δ 5.1 10.3 PT39.8±0.8 14.3 8.5 1.63.1 dia. hole+0.13 −0.03 0.7 7.218.8 15.9 t=0.5 Three, #187 series tab 2.8 (10) 27.8 37.8±0.8 3.4±0.15 dia. hole 22.2±0.1 3.1 +0.13 −0.03 10.3±0.1 OP 2.8 t=0.5 Model D3V-21G6K-1@4A-D D3V-166K-1@5-D D3V-116K-1@5-D D3V-116K-1@4-D D3V-66K-1@4-D D3V-6G6K-1@3-D D3V-016K-1@3-D OF max. RF min. 50 gf 3 gf 75 gf 10 gf 40 gf 3 gf 20 gf - - - PT max. OT min. MD max. 7.2 mm 2.0 mm 2.0 mm 7.2 mm 2.0 mm 2.7 mm (F gap type) or 2.0 mm (G gap type) 7.2 mm 2.0 mm 2.7 mm OP 20.7 ± 2.2 mm

Miniature Basic Switch D3V 87 Precautions Be sure to read the precautions and information common to all Snap Action and Detection Switches, contained in the Technical User’s Guide, “Snap Action Switches, Technical Information” for correct use. ■Correct Use Mounting Direction Mount lever-operated switches with a maximum operating force of

0.49 N in a direction where the actuator weight will not be applied to

the switch. Since the switch is designed for a small load, its resetting force is small. Therefore, resetti ng failure may occur if unnecessary load is applied to the switch. Insulation Distance According to EN61058-1, the minimum insulation thickness for this switch should be 1.1 mm and minimum clearance distance between the terminal and mounting plate should be 1.9 mm. If the insulation distance cannot be provided in the product incorporating the switch, either use a switch with insulation barrier or use a Separator to ensure sufficient insulation distance. Using Microloads Using a model for ordinary loads to switch microloads may result in faulty operation. Instead, use the models that are designed for microloads and that operate in the following range; However, even when using microload models within the operating range shown above, if inrush current or inductive voltage spikes occur when the contact is opened or closed, then contact wear may increase and so decrease the service life. Therefore, insert a contact protection circuit where necessary. Solder Terminal Approval Conditions ■Cautions Handling Be careful not to drop the switch. Doing so may cause damage to the switch’s internal components because it is designed for a small load. Use of soldering iron for normal soldering is acceptable. Soldering hook holes version available. Soldering terminal types 1 and 2 are met. Current (mA) Voltage (V) Inoperable range Operating range for general- load models Operating range for micro load models D3V-01

Miniature Basic Switch D3V OMRON ON-LINE Global - http://www.omron.com USA - http://www.components.omron.com Cat. No. X303-E-1 Printed in USA OMRON ELECTRONIC COMPONENTS LLC 55 E. Commerce Drive, Suite B Schaumburg, IL 60173 847-882-2288 11/10 Specifications subject to change without notice All sales are subject to Omron Electronic Components LLC standard terms and conditions of sale, which ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.