D38999-24WF35SN

Amphenol Corporation

MIL-DTL-38999, Series I LJT, II JT, III TV Insert Availability and Identification Chart

Manufacturer: Amphenol Corporation

Document: 53 Pages / 2Mb

Request Quote Download Datasheet Read online HTML view

More from Amphenol Corporation Browse D parts

Online Datasheet

Read D38999-24WF35SN online.

D38999-24WF35SN AMPHENOL | Alldatasheet

Document overview

Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
PDF pages: 53

Technical content

2648283723 III501526500 PylePrinted

TransientFiber OpticsOptions Others Matrix 2 Matrix Pyle Crimp Rear Release Matrix I II III High Speed Contacts SJT Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com AmphenolAerospace JT/LJT Hermetics Contact Size JT II LJT I TV III TV III Solder Crimp Class H Class Y TV* Service Rating Total Contacts 22D 22M 22 2016 12 12 (Coax) (Power) (Coax) 8†† (Twinax) 8-2■ P M 2 2 8-3■ X NA P P M 3 39-3■ X 9-5★■ Grounded 1 1 8-6 X X P P M 6 69-6 X X P P 9-7■ X M 7 7 9-22■ X I 2 2 8-35 X P P M 6 69-35 9-35 A35 X P P P 8-44 X P P M 4 49-44 X 9-94 ■ ✦ M 2 2 8-97■ X M 4 2 2 8-98 S X P P I 3 39-98 9-98 A98 X X P P P 11-2★ 11-2★ B2 X P I 2 2 10-4 3 I 4 411-4 11-4 X S/2 10-5 X X P P I 5 511-5 11-5 B5 X X P 11-6■ S I 6 6 10-13 X X P/S P/S M 13 1311-13 X X P/S P/S 10-35 X P/S P/S M 13 1311-35 11-35 B35 X P/S P/S P 11-54 ■ X ✦ II 4 4 10-98 X X P/S P/S I 6 611-98 11-98 B98 X X P/S P/S P 10-99 X P P I 7 711-99 11-99 B99 P X P 12-3 X X ✦ P P II 3 313-3■ P 12-4 X X P P I 4 413-4★ 13-4★ C4 X X P P P 12-8 X X P P I 8 813-8 13-8 C8 X X P P P 13-13■ I, Fiber Optic 4 2 2 12-22 X P/S P/S M 22 2213-22 X X P/S P/S 12-35 X P/S P/S M 22 2213-35 13-35 C35 X P/S P/S P 13-63■ ✦ l 4 2 2 12-98 X X P/S P/S I 10 1013-98 13-98 C98 X X P/S P/S P 14-4■ 2 I 4 415-4■ 15-4■ 2 ✦ 14-5 X X P P II 5 515-5★ 15-5★ D5 X X P P P 14-15 X X P P I 15 14 1 15-15 15-15 D15 X X P/S P/S P I 15 14 1 MIL-DTL-38999, Series I LJT, II JT, III TV Insert Availability and Identification Chart Series Series Series Military X Completely tooled.

Majority of tooling is completed (contact Amphenol Aerospace for availability). ✦ Not tooled for 02-R. P Available with Pin contacts only S Available with Socket contacts only P/S Available with Pin contacts or Socket contacts ★ Ground plane proprietary option available. Arrg. 9-5 is exclusively ground plane type. ■ Not Mil-Qualified. ✧ 21-75 is Mil-Qualified with twinax contacts only. Note: MS connector 21-75 is supplied with size 8 twinax. Commercial connector 21-75 is supplied with size 8 coax. * Hermetic inserts - solder termination standard. (Contact Amphenol Aerospace for optional PCB or eyelet termination). Two size 16 contacts dedicated to fiber optics. See the Fiber Optic section for more information. * For use in MIL-STD-1760 applications (see pages 40 & 41). † For RG 180/U and RG 195/U cables only. †† Size 8 Coax and Twinax are interchangeable. (2) Not Tooled for RP or 02RE (3) Pin inserts only, not tooled for RP or 02RE (Consult Sidney, NY for avail.) (5) MS Connector 21-79 has provision for two size 8 coax contacts. Coax contacts are not supplied unless specified by customer.

83723 III

26500 Pyle

I II III SJT Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com AmphenolAerospace MIL-DTL-38999, Series I LJT, II JT, III TV Insert Availability and Identification Chart JT/LJT Hermetics Contact Size Solder Crimp Class H Class Y TV* Service Rating Total Contacts 22D 22M 22 20 16 12 12 (Coax) (Power) (Coax) 8†† (Twinax) 14-18 X X P/S P/S I 18 1815-18 15-18 D18 X X P/S P/S P 14-19■ X X I 19 1915-19 15-19 D19 X P P P 14-35 X P P M 37 3715-35 15-35 D35 X P/S P/S P 14-37 X X P P M 37 3715-37 X X P P 14-68■ 2 P P 1 8 815-68■ X 2 14-97■ X P P I 12 8 415-97 15-97 D97 X X P P P 17-2 17-2 E2 X ✦ M 39 38 1 16-6 X P P I 6 617-6 17-6 E6 X P P P 16-8 X X P P II 8 817-8★ 17-8★ E8 X X P/S P/S P 16-13■ 2 I 13 1317-13■ 2 17-22■ 17-22★■ ✦ Coax 4 2 2 17-25■ 2 M 24 22 2 16-26 X X P/S P/S I 26 2617-26 17-26 E26 X X P/S P/S P 16-35 X P P M 55 5517-35 17-35 E35 X X P P P 16-42 X M 42 4217-42■ P 17-52■ X ✦ M 2 2 16-55 X X P/S P/S M 55 5517-55 X X P/S P/S 17-60■ X I/Coax 10 8 2 16-99 X X P P I 23 21 217-99 17-99 E99 X X P P 19-AD■ X ✦ Inst. 17 16 1 18-11 X X P P II 11 1119-11★ 19-11★ F11 X X P P P 19-18 19-18 F18 2 X M 18 14 4 18-28 X X I 28 26 219-28■ 19-28 F28 X P X 18-30 X X I 30 29 119-30■ X P 19-31 ■ X M 15 12 1 2 18-

32 X X P/S P/S I 32 3219-32 19-32 F32 X X P/S P/S P

18-35 X P P M 66 6619-35 19-35 F35 X P P P 18-53 X X M 53 5319-53■ P 18-66 X X P P M 66 6619-66 X P P 19-67■ X 3 S S M 67 67 18-68■ 2 I 18 1819-68■ 3 18-96■ 2 I 9 9 20-1 X P P M 79 7921-1 X P/S P/S 20-2 X M 65 6521-2■ X 20-11■ 3 I 11 1121-11★ 21-11★ G11 X Series Series Series Military JT II LJT I TV III TV III

I II III High Speed Contacts SJT Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com AmphenolAerospace JT/LJT Hermetics Contact Size Solder Crimp H Y TV* Service Rating Total Contacts 22D 22M 22 20 16 12 12 (Coax) (Power) (Coax) 8†† (Twinax) 20-16 X X P/S P/S II 16 1621-16★ 21-16★ G16 X X P P P 21-25■ X I 25 25 21-27■ X I 27 27 21-29 ■ X I 27 19 4 4 20-35 X P P M 79 7921-35 21-35 G35 X P/S P/S P 20-39 X X P P I 39 37 221-39 21-39 G39 X X P P P 20-41 X X P P I 41 4121-41 21-41 G41 X X P/S P/S P 21-75★ 21-75★✧ G75 2 X N M 4 4 (4) 21-79■ 21-79 ■ 2 X II 19 17 2 (5) 22-1 X P/S P/S M 100 10023-1 X P P 22-2 X X P P M 85 8523-2 X X P P 22-14■ 2 ✦ I 14 1423-14■ 23-14 ■ 2 ✦ 22-21 X X P P II 21 2123-21★ 23-21★ H21 X X P P P 22-32 X X P P I 32 3223-32■ X P 23-34■ X I 34 34 22-35 X P/S P/S M 100 10023-35 23-35 H35 X P P P 22-53■ P I 53 5323-53 23-53 H53 X X P/S P/S P 23-54 ■ X M 53 40 9 4 22-55 X X P P I 55 5523-55 23-55 H55 X P 23-97■ X II 16 16 23-99■ X II 11 11 24-1 X P P M 128 12825-1 X P P 24-2 X M 100 10025-2 X 24-4 X P P I 56 48 825-4 25-4 J4 X P 25-7■ 25-7 J7 X M Twinax 99 97 2 25-8★ J8 ✦ Twinax 8 8 25-11* J11 2 ✦ N 11 2 9 25- 17 ■ ✦ M 42 36 6 24-19■ X P P I 19 1925-19★ 25-19★ J19 X P 25-20■ 25-20* J20 2 ✦ N 30 10 13 4 3 24-24 X P P I 24 12 1225-24★ 25-24★ J24 X P P 25-26 ■ ✦ I 25 16 5 4 24-29 X I 29 2925-29★ 25-29★ J29 X X Series Series Series Military MIL-DTL-38999, Series I LJT, II JT, III TV Insert Availability and Identification Chart X Completely tooled. Major ity of tooling is completed (contact Amphenol Aerospace for availability). Not tooled f or 02-R. P A vailable with Pin contacts only S A vailable with Socket contacts only P/S A vailable with Pin contacts or Socket contacts Ground plane propr ietary option available. Arrg. 9-5 is exclusively g round plane type. Not Mil-Qualified. 21-75 is Mil-Qualified with twinax contacts only Her metic inserts - solder termination standard. (Contact Amphenol Aerospace f or optional PCB or eyelet termination). T wo size 16 contacts dedicated to fiber optics. See the Fiber Optic Section f or more information. * F or use in MIL-STD-1760 applications (see pages 40 & 41). F or RG 180/U and RG 195/U cables only. Siz e 8 Coax and Twinax are interchangeable. (2) Not Tooled for RP or 02RE (3) Pin inser ts only, not tooled for RP or 02RE (Consult Sidney, NY for avail.) (4) MS connector 21-75 is supplied with size 8 twinax. Commercial connector 21-75 is supplied with siz e 8 coax. (5) MS Connector 21-79 has pro vision for two size 8 coax contacts. Coax contacts are not supplied unless specified b y customer. JT II LJT I TV III TV III

7 2648283723 III501526500 PylePrinted Circuit Board EMI Filter TransientFiber OpticsOptions Others Matrix Pyle Crimp Rear Release Matrix Matrix 2 High Speed Contacts 38999 I II IIISJT Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com AmphenolAerospace (Insert arrangements requiring non-standard shells or larger contacts) X Completely tooled.

Majority of tooling is completed (contact Amphenol Aerospace for availability). ✦ Not tooled for 02-R. P Pin inserts only (contact Amphenol Aerospace for socket availability). ★ Ground plane proprietary option available. Arrangement 9-5 is exclusively ground plane type. ■ Not Mil-Qualified. * Hermetic inserts - solder termination standard. (Contact Amphenol Aerospace for optional PCB or eyelet termination). Two size 16 contacts dedicated to fiber optics. See the Fiber Optic section for more information. * For use in MIL-STD-1760 applications (pgs. 40 & 41). † For RG 180/U and RG 195/U cables only. †† Size 8 Coax and Twinax are interchangeable. Note: 25L-3 and 25L-7 require longer shells. Select Non-Standard Shell Size - Special Insert Arrangement (Not Mil-Spec Qualified) Contact Size Shell Size- Insert Arrg. Crimp Hermetics* Service Rating Total Contacts Comments 22D 20 16 12 8†† (Twinax) 9-2 X I 2 Formerly Pyle 2 15-4 X II 4 Formerly Pyle 4 15-25 X M 25 Formerly Pyle 22 3 17-20 X M 20 Formerly Pyle 16 4 21-12 X I 12 Formerly Pyle 3 9 21-21 X M/Inst. 41 Improved sealing 32 9 21-99 X M 16 Formerly Pyle 5 11 25-92 X M 101 Formerly Pyle 92 9 25-97 X M 42 Formerly Pyle 26 3 13 Contact Size Shell Size- Insert Arrg. Crimp Hermetics* Service Rating Total Contacts 22D 20 8 4 0 25-16 X M 8 6 2 25L-3 X II 3 1 2 25L-7 X II 7 7 33-3 X II 3 1 2 33-5 X II 5 5 33-6 X II 6 2 4 37-5 X II 4 4 Select Shell Size - Special Insert Arrangement (Not Mil-Spec Qualified) JT/LJT Hermetics Contact Size Solder Crimp H Y TV* Service Rating Total Contacts 22D 22M22 20 16 12 12 (Coax) (Power) (Coax) 8†† (Twinax) Quadrax 24-35 X P P New 128 12825-35 25-35 J35 X P P P M 24-37 X I 37 3725-37★ 25-37★ J37 X 24-43■ 3 I 43 23 2025-43 25-43 J43 X 2 ✦ 25-46 25-46 J46 2 ✦ I 46 40 4 2 24-61 X X P P I 61 6125-61 25-61 J61 X X P P P 25-62■ X ✦ I 12 8 4 25-90■ ✦ I 46 40 4 2 25-F4 ■ X M/I 66 49 13 4 Series Series Series Military TV Series III MIL-DTL-38999, Series I LJT, II JT, III TV Insert Availability and Identification Chart X Completely tooled. ✦ Not tooled for 02-R. P Pin inserts only (contact Amphenol Aerospace for socket availability). ★ Ground plane proprietary option available. Arrg. 9-5 is exclusively ground plane type. ■ Not Mil-Qualified. JT II LJT I TV III TV III

TransientFiber OpticsOptions Others Matrix 2 Matrix Pyle Crimp Rear Release Matrix I II III High Speed Contacts SJT Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com AmphenolAerospace Front face of pin inserts illustrated A B C D E F A B C DE F G H A D C B A B C D E FG HJ KL M N P R S T U V WXY Z a b c MIL-DTL-38999, Series I LJT, II JT, III TV Insert Arrangements A B C 1 5 6 7 A B 5 1 4 A B CD C A B A B A B C D A B CD E F 1 1213 1213 A B CD E F A B CD E F G A B C A B C D A B C D E F G H 22 A B C D E F G H JK A B CD EA BC D A B C D E F G H J K L M N P R A B C D EFG H J K L M N P RS T U A B C D EF GH J K L M N P R ST U V 2131 A B C D EF G H J K L M 2131 A B C DE F G H CONTACT LEGEND 8 10 12 16 20 22 22M 22D A BCD E Shell Size & Insert Arrg. for: Series II JT 8-2 8-3 8-6 8-35 8-44 8-97 8-98 Series I LJT 9-3 9-6 9-7 9-22 9-35 9-44 9-98 Series III TV 9-5 9-35 9-94 9-98 Service Rating M M Grounded M M I M M M M I Number of Contacts 2 3 1 6 7 2 6 4 2 2 2 3 Contact Size 20 20 8 Twinax 22M 22M 20 22D 22 20 22M 20 20 AB Shell Size & Insert Arrg. for: Series II JT 10-4 10-5 10-13 10-35 10-98 10-99 12-3 Series I LJT 11-2 11-4 11-5 11-6 11-13 11-35 11-98 11-99 13-3 Series III TV 11-2 11-4 11-5 11-35 11-54 11-98 11-99 Service Rating I I I I M M II I I II Number of Contacts 2 4 5 6 13 13 4 6 7 3 Contact Size 16 20 20 20 22M 22D 22D 20 20 16 Shell Size & Insert Arrg. for: Series II JT 12-4 12-8 12-22 12-35 12-98 14-4 14-5 14-15 Series I LJT 13-4 13-8 13-22 13-35 13-98 15-4 15-5 15-15 Series III TV 13-4 13-8 13-35 13-63 13-98 15-4 15-5 15-15 Service Rating I I M M I I I II I Number of Contacts 4 8 22 22 2 2 10 4 5 14 1 Contact Size 16 20 22M 22D 16 12 20 12 16 20 16 Shell Size & Insert Arrg. for: Series II JT 14-18 14-19 14-35 14-37 14-68 14-97 Series I LJT 15-18 15-19 15-35 15-37 15-68 15-97 17-2 Series III TV 15-18 15-19 15-35 15-97 17-2 Service Rating I I M M I I M Number of Contacts 18 19 37 37 8 8 4 38 1 Contact Size 20 20 22D 22M 16 20 16 22D 8 Twinax Shell Size & Insert Arrg. for: Series II JT 16-6 16-8 16-13 16-26 Series I LJT 17-6 17-8 17-13 17-22 17-25 17-26 Series III TV 17-6 17-8 17-22 17-26 Service Rating I II I Coax M I Number of Contacts 6 8 13 2 2 22 2 26 Contact Size 12 16 16 12 Coax 8 Coax 22D 8 Coax 20 A B D C A B C D EF G H J K L N M 1 2 5678 11 12 13 14 15 16 B A AB C D

9 2648283723 III501526500 PylePrinted Circuit Board EMI Filter TransientFiber OpticsOptions Others Matrix Pyle Crimp Rear Release Matrix Matrix 2 High Speed Contacts 38999 I II IIISJT Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com AmphenolAerospace CONTACT LEGEND Front face of pin inserts illustrated A B C D E FG HJ KL M N P R S T U VW X Y Z A B C D E F G H J K L A B C D E F G H J K L M N PR S 8 1 0 1 2 1 6 2 0 22D MIL-DTL-38999, Series I LJT, II JT, III TV Insert Arrangements Shell Size & Insert Arrg. for: Series II JT 16-35 16-42 16-55 16-99 18-11 Series I LJT 17-35 17-42 17-55 17-99 19-11 Series III TV 17-35 17-52 17-60 17-99 19-11 Service Rating M M M M I/Coax I II Number of Contacts 55 42 2 55 8 2 21 2 11 Contact Size 22D 22 8 Twinax 22M 22D 8 Coax 20 16 16 Shell Size & Insert Arrg. for: Series II JT 18-28 18-30 18-32 18-35 Series I LJT 19-18 19-28 19-30 19-32 19-35 Series III TV 19-18 19-28 19-31 19-32 19-35 Service Rating M M I M I M Number of Contacts 14 4 26 2 29 1 2 1 12 32 66 Contact Size 22D 8 Twinax 20 18 20 16 8 Coax 12 22D 20 22D Shell Size & Insert Arrg. for: Series II JT 18-53 18-66 18-68 18-96 Series I LJT 19-53 19-66 19-67 19-68 Series III TV Service Rating M M M I I Number of Contacts 53 66 67 18 9 Contact Size 22 22M 22M 16 12 Shell Size & Insert Arrg. for: Series II JT 20-1 20-2 20-11 20-16 Series I LJT 21-1 21-2 21-11 21-16 Series III TV 19-AD 21-11 21-16 Service Rating Inst. M M I II Number of Contacts 16 1 79 65 11 16 Contact Size 20 8 Twinax 22M 22 12 16 A B C D E F G H J K L A B C D E F G H R J K L M N P S T U V W X Y Z a b c d e A B C EK M N R S U V W gh f A B C D E F G H J K L M N P R S T U V W X Y Za bc d e f g h j A B C D E F G H J K L M N P R S T U A B C D E F GHJK L M N P R S T U V W XY Za b c d e g f A BL CK DJ EH F GR U M T N S P A BH C D F E G J 5253 17 25 24 31 A B 9 3 6 4 215 314 11 8 710 8 9 A

TransientFiber OpticsOptions Others Matrix 2 Matrix Pyle Crimp Rear Release Matrix I II III High Speed Contacts SJT Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com AmphenolAerospace 1 2 91011 2627 61 71 CONTACT LEGEND Front face of pin inserts illustrated A B C D E F G H JKL M N P R S T U V W X Y Z a b c d e f g h i j k m n p q r A B C D E F G H J KLM N P R S T U V W X Y Z a b c def g h i j k m n pq r s t A BC D A B C D E F G H J K L M N P R S T U V A B CD E F A BK CJ LP MN DH EG F A B C D E F G H J K L M P R S N TU V W X A B C D E FGH J K L M N P R S T U VWX Y Z a b c d ef g h j 8 1 0 1 2 1 6 2 0 22D MIL-DTL-38999, Series I LJT, II JT, III TV Insert Arrangements Shell Size & Insert Arrg. for: Series II JT 20-35 Series I LJT 21-25 21-27 21-35 Series III TV 21-29 21-35 Service Rating I I I M Number of Contacts 25 27 19 4 4 79 Contact Size 20 20 20 16 12 22D A B C D E F G HJK L M N P R S T UV W X Y Z a b A B C D E F G H J K L M N P R S T U VW X Y Z a b cd Shell Size & Insert Arrg. for: Series II JT 20-39 20-41 22-1 Series I LJT 21-39 21-41 21-75 21-79 23-1 Series III TV 21-39 21-41 21-75 21-79 Service Rating I I N II M Number of Contacts 37 2 41 4 17 (See Note) 100 Contact Size 20 16 20 (See Note) 22D 22M Shell Size & Insert Arrg. for: Series II JT 22-2 22-14 22-21 22-32 Series I LJT 23-2 23-6 23-14 23-21 23-32 Series III TV 23-6 23-14 23-21 Service Rating M M I II I Number of Contacts 85 6 14 21 32 Contact Size 22 8 Twinax 12 16 20 100 Note: MS connector 21-75 is supplied with four size 8 twinax contacts. Commercial connector 21-75 is supplied with four size 8 coax contacts. MS connector 21-79 has provision for two size 8 coax contacts. Coax contacts are not supplied unless specified by customers.

11 2648283723 III501526500 PylePrinted Circuit Board EMI Filter TransientFiber OpticsOptions Others Matrix Pyle Crimp Rear Release Matrix Matrix 2 High Speed Contacts 38999 I II IIISJT Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com AmphenolAerospace Front face of pin inserts illustrated CONTACT LEGEND *** For use in MIL-STD-1760 applications (see pages 40 and 41). A B C D E F G H J K LM N P R S T U V W X Y Z a b c d e f g h k mnp q r t u v w x y zs JJ KK L L A A B BC C D D E E FF G G H H 25 75 A B C D E F G H 8 1 0 1 2 1 6 2 0 22D Shell Size & Insert Arrg. for: Series II JT 22-35 22-53 Series I LJT 23-34 23-35 23-53 Series III TV 23-35 23-53 23-54 Service Rating I M I M Number of Contacts 34 100 53 40 9 4 Contact Size 20 22D 20 22D 16 12 Shell Size & Insert Arrg. for: Series II JT 22-55 24-1 Series I LJT 23-55 23-97 23-99 25-1 Series III TV 23-55 Service Rating I II II M Number of Contacts 55 16 11 128 Contact Size 20 16 16 22M A B C D E F G HJ K L M N P R S T U V W X Y Za b c d e f g h k m n p q r s t A B u v w x y z A B C C D D E E FF G G HH 1 2 3 11121314 1516 2223 24 25 2627 3334 363738 45 46 4849 50 A B C D E F G H JKL M N P R S T U V W X Y Z a b c d ef g h i j k m n p q r s t vw x y z AA BB C C u D DE E FF G G H H Shell Size & Insert Arrg. for: Series II JT 24-2 24-4 Series I LJT 25-2 25-4 25-7 Series III TV 25-4 25-7 25-8 Service Rating M I M Twinax Number of Contacts 100 48 8 97 2 8 Contact Size 22 20 16 22D 8 Twinax 8 Twinax A B C D E F G H JK L M N P R S T U V W X Y Z a b c d e f g h j k l 9596 100 A B C D E F G H J K L M N P R S A B C D E F G H J K L 104 105 114 115 121 125 40 51 100 MIL-DTL-38999, Series I LJT, II JT, III TV Insert Arrangements

TransientFiber OpticsOptions Others Matrix 2 Matrix Pyle Crimp Rear Release Matrix I II III High Speed Contacts SJT Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com AmphenolAerospace Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com AmphenolAerospace A B C D E F G H J KL A B C D E F G H JKL M N P R S T U V W XY Z a b c d e f g h k m n p q r s t uv w A B C D E F GH J K L M N P R ST U V A B C D E F G H J K L M N P R S T U VWX Y Z A B C D E F G HJ K L M N P R S T U VW X Y Z a 18 19 20 2223 Front face of pin inserts illustrated CONTACT LEGEND † Coax contacts for RG180/U or RG195/U cable. A B C D E F G HJ K L M N P R S T U V W XY Z a b c d e f 104 105 114 115 121 125 128 A B C D E F G H JKLM N P R S T U V W X Y Z a b c d e fgh k m n p q r s t u v w xy z AA 8 1 0 1 2 1 6 2 0 22D Shell Size & Insert Arrg. for: Series II JT 24-19 Series I LJT 25-11 25-19 25-20 Series III TV 25-11* 25-17 25-19 25-20* Service Rating N M I N Number of Contacts 2 9 36 6 19 10 13 3 4 Contact Size 20 10 22D 8 Twinax 12 20 16 8 Twinax 12 Coax Shell Size & Insert Arrg. for: Series II JT 24-24 24-29 24-35 Series I LJT 25-24 25-29 25-35 Series III TV 25-24 25-26 25-29 25-35 Service Rating I I I M Number of Contacts 12 12 16 5 4 29 128 Contact Size 16 12 20 12 8 Coax 16 22D Shell Size & Insert Arrg. for: Series II JT 24-37 25-43 Series I LJT 25-37 25-43 25-46 Series III TV 25-37 25-43 25-46 Service Rating I I I Number of Contacts 37 23 20 40 4 2 Contact Size 16 20 20 16 8 Coax (With Matched Impedance) A B C D E F G H J K L M N P R S T U V W X Y Z ab c d e f g h k m np q r A B C D E F G H J K LMN P R S T U V W X Y Z a b c d e f g h k m n p q r st u v w x MIL-DTL-38999, Series I LJT, II JT, III TV Insert Arrangements

I II III SJT Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com AmphenolAerospace Front face of pin inserts illustrated Front face of pin inserts illustrated CONTACT LEGEND NOTE: Some specials shown here were formerly known as Pyle arrangements. Consult Amphenol for how to order information for connectors with these inserts. For further information on special arrangements consult Amphenol Aerospace, Sidney NY . * Pyle 15-4 does not mate with Amphenol Tri-Start 15-4 insert. B A D C B A 910 1920 A D C B 15 14 11 10 9 8 3 2 J H G F E K D L C B A M 9 10 A B C DE F G H J 11 12 1718 23 24 25 26 2728 3031 A J H G F E D C B M L K S RP N 4667 101 78 66 56 45 35 23 12 MA LB N KC JD HE GF YW XaU Z V r m p n ksb c d e P R S T jw hgf u vt 81 01 21 62 0 22D Shell Size & Insert Arrg. for: Series II JT 24-61 Series I LJT 25-61 Series III TV 25-61 25-62 25-90 25-F4 Service Rating I I I Size 22D=M, Balance =I Number of Contacts 61 8 4 40 4 2 49 13 4 Contact Size 20 16 8 20 16 8 Twinax 22D 16 12 A B C D E F G H JK LM N a P R S T U V W X Y Z b c d e f gh AA k q m n p r s t u v w xy z 60 66 64 37 50 51 41 42 43 38 39 40 29 2726 5463 62 61 3253 52 Shell Size & Insert Arrg. for: Series III TV 9-2 15-4* 15-25 17-20 21-12 21-21 Service Rating I II M M I M/Inst. Number of Contacts 2 4 22 3 16 4 3 9 32 9 Contact Size 20 16 22D 16 22D 12 20 12 22D 12 Shell Size & Insert Arrg. for: Series III TV 21-99 25-92 25-97 Service Rating M M M Number of Contacts 5 11 92 9 26 3 13 Contact Size 22D 12 22D 16 22D 16 12 MIL-DTL-38999, Series I LJT, II JT, III TV Insert Arrangements MIL-DTL-38999, Series III TV Special Insert Arrangements DA CB 1 8 4 5 A B C D E F G H J K LMNP R S T U V W X Y Z a b c d e f g h i jkmn p q r s t u v w x y z BB CC DD EE F F GG HH JJ KK LL MM NN AA PP

Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com AmphenolAerospace SJT38999 TransientFiber OpticsContactsAccessories Tools Options Others Matrix 2 Matrix Pyle Crimp Rear Release Matrix AmphenolAerospace I II III Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com Front face of pin inserts illustrated CONTACT LEGEND NOTE: Some specials shown here were formerly known as Pyle arrangements. Consult Amphenol for how to order information for connectors with these inserts. Consult Amphenol Aerospace for longer shell drawings. A B C D E FG H A B C A B CD E F G B C A A B C D E A B C D E F A B C D 8 4 022D MIL-DTL-38999, Series III TV Special Insert Arrangements Non-Standard Shells or Large Contacts Shell Size & Insert Arrg. for: Series III TV 25-16 25L-3 25L-7 Service Rating M II II Number of Contacts 6 2 1 2 7 Contact Size 20 4 8 4 8 Shell Size & Insert Arrg. for: Series III TV 33-3 33-5 33-6 Service Rating II II II Number of Contacts 1 2 5 2 4 Contact Size 4 0 4 8 4 Shell Size & Insert Arrg. for: Series III TV 37-5 Service Rating II Number of Contacts 4 Contact Size 0

TransientFiber OpticsOptions Others Matrix Pyle Crimp Rear Release Matrix Matrix 2 High Speed Contacts 38999 I II IIISJT Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com AmphenolAerospace Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com AmphenolAerospace 15Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com AmphenolAerospace MIL-DTL-38999, Series I LJT, II JT, III TV Specifications/ Contacts CONTACT RATING *When tested using silver plated wire. SERVICE RATING Please note that the establishment of electrical safety factors is left entirely in the designer’s hands, since he is in the best position to know what peak voltage, switching surges, transients, etc. can be expected in a particular circuit. Service Rating Suggested Oper. Voltage (Sea Level) Test Voltage (Sea Level) Test Voltage 50,000 Ft. Test Voltage 70,000 Ft Test Voltage 110,000 Ft. AC (RMS) DC M 400 500 1300 VRMS 550 VRMS 350 VRMS 200 VRMS N 300 450 1000 VRMS 400 VRMS 260 VRMS 200 VRMS I 600 850 1800 VRMS 600 VRMS 400 VRMS 200 VRMS II 900 1250 2300 VRMS 800 VRMS 500 VRMS 200 VRMS Contact Size Test Current (Amps) Maximum Millivolt Drop Crimp* Maximum Millivolt Drop Crimp Hermetic Solder* Hermetic* 22M 3 2 45 20 60 22D 5 3 73 85 22 5 3 73 20 85 20 7.5 5 55 20 60 16 13 10 49 20 85 12 23 17 42 20 85 10 (Power) 33 NA 33 NA NA 8 (Power) 46 NA 26 NA NA 4 80 NA 23 NA NA 0 150 NA 21 NA NA Contact Size Crimp Well Data Solder Well Data Well Diameter Normal Well Depth Well Diameter Nominal Well Depth – .000 -.000 .094 -.000 .094 -.004 .125 -.004 .141 -.002 .141 10 (Power) .137 ± .002 .355 NA NA 8 .181 ± .002 .490 NA NA 4 .281 ± .002 .490 NA NA 0 .453 ± .002 .585 NA NA MIL-DTL-38999 Series II JT/ Series I LJT CRIMP CONTACTS Contact Size JT/LJT Pins MS No. JT Socket MS No. LJT Sockets MS No. 8 (Coax)* M39029/60-367 NA M39029/59-366 8 (Twinax) M39029/90-529** NA M39029/91-530 10 (Power) M39029/58-528 NA M39029/56-527

12 M39029/58-365 M39029/57-359 M39029/56-353

16 M39029/58-364 M39029/57-358 M39029/56-352

MIL-DTL-38999 Series III STANDARD 500 CYCLE CONTACTS FOR TV AND CTV, P & S MIL-DTL-38999 Series III 1500 CYCLE CONTACTS FOR CTV, CLASSES H & J Above part numbers include standard 500 cycle finish designation - gold plating over suitable underplate in accordance with SAE AS39029. For other finish variations, consult Sidney, NY . *For use with RG180B/U and RG195A/U cable. For other size 8 coax or optional sizes 12 and 16 coax contacts available for use in Tri-Start connectors, see High Speed Contact section of this catalog or consult Amphenol, Sidney, NY . ** For use with M17/M176-00002 cable. † Optional design - see slash sheet MS39029. For other contact options available for use in Tri-Start connectors, (wire wrap, thermocouple, fiber optic) consult Amphenol. Wire wrap data given on next page. Contact Size CTV Pins CTV Sockets Commercial No. Military No. Supersedes Commercial No. Military No. Supersedes 12 10-597072-2X M39029/107-623 – 10-597073-2X M39029/106-617 – 16 10-597068-2X M39029/107-622 – 10-597069-2X M39029/106-616 – 20 10-597064-2X M39029/107-621 – 10-597065-2X M39029/106-615 – 22D 10-597058-3X M39029/107-620 – 10-597061-2X M39029/106-614 – Contact Size TV/CTV Pins TV/CTV Sockets Military No. Supersedes Military No. Supersedes 8 (Coax)* M39029/60-367 MS27536 M39029/59-366 MS27535 8 (Power) Contact Factory “ “ “ 8 (Twinax) M39029/90-529** N/A M39029/91-530 N/A 10 (Power) M39029/58-528 N/A M39029/56-527 N/A

12 M39029/58-365 MS27493-12 M39029/56-353 MS27490-12

16 M39029/58-364 MS27493-16 M39029/56-352 MS27490-16

20 M39029/58-363 MS27493-20 M39029/56-351 MS27490-20

22D M39029/58-360 MS27493-22D M39029/56-348 MS27490-22D

4 N/A N/A N/A N/A

0 N/A N/A N/A N/A

MS No. JT Socket MS No. LJT Sockets MS No.

20 M39029/58-363 M39029/57-357 M39029/56-351

22 M39029/58-362 M39029/57-356 M39029/56-350

22M M39029/58-361 M39029/57-355 M39029/56-349 22D M39029/58-360 M39029/57-354 M39029/56-348

TransientFiber OpticsOptions Others Matrix 2 Matrix Pyle Crimp Rear Release Matrix I II III High Speed Contacts SJT Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com AmphenolAerospace FINISH DATA MIL-DTL-38999, Series I LJT, II JT Aluminum Shell Components Non-Hermetic Finish Suffix Indicated Finish Standard for JT Types Listed Below Indicated Finish Standard for LJT Types Listed BelowMilitary Commercial Finish Plus “SR” Suffix Cadmium Plated Nickel Base MS (A) – (SR) JT/JTG/JTL/JTP LJT/LJTP Anodic Coating (Alumilite) MS (C) (005) (300) JTS/JTPS/JTLS LJTPS/LJTS Chromate Treated (Iridite 14-2) (011) (344) JTN/JTPN/JTLN LJTN/LJTPN Olive Drab Cadmium Plate Nickel Base MS (B) (014) (386) Electroless Nickel MS (F) (023) (424) Nickel-PTFE (038) Hermetic Connectors Finish Suffix Indicated Finish Standard for JT Types Listed Below Indicated Finish Standard for LJT Types Listed BelowMilitary Commercial Carbon Steel Shell Tin Plated Shell and Contacts JT( )H / JT( )Y JTL( )H / JTL( )Y LJT( )Y LJT( )H Carbon Steel Shell Tin Plated Shell and Gold Plated Contacts MS (D) Stainless Steel Shell Gold Plated Contacts MS (E) (162) JTS( )Y JTLS( )Y LJTS( )Y MIL-DTL-38999, Series I LJT, II JT, III TV Specifications FINISH DATA MIL-DTL-38999, Tri-Start Series III TV Aluminum Shell Components Non-Hermetic Finish Service Class Military Commercial Anodic Coating (Non-Conductive) C RX Electroless Nickel F (Metal) RF M (Composite) Olive Drab Cadmium Plate Nickel Base W (Metal) RW J (Composite) Stainless Steel with Nickel Plate S RS Stainless Steel K RK Durmalon plated T DT Zinc-Nickel Plated Z ZN Hermetic Shell Components Material/Finish Service Class Military Commercial Stainless Steel Y Y Stainless Steel with Nickel Plate N YN Add Suffix (005) to part number.

Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com 17 MIL-DTL-38999, Series I LJT, II JT, III TV Specifications Amphenol MIL-DTL-38999, Series III, TV TABLE OF CONTENTS Combined MIL-DTL-38999 Series I, II, III MIL-DTL-38999, Series III TV . . 20 Shell Styles: Crimp Wall Mounting Receptacle TVP00R (D389999/20) /CTVP00R (D38999/20)• 26 Crimp CLUTCH-LOK™ Straight Plug for High Vibration TV26/MTV26• . . . . 29 Crimp Jam Nut Receptacle TV07R (D38999/24) / CTV07R (D38999/24)• . . . 30 Hermetic Solder Mounting Receptacle TVSIY (D38999/25), • Breakaway Fail-Safe Lanyard Release Plug • Breakaway Hybrid, Low Profile Lanyard Release Plug• HD38999 (High Density, Crimp) Plugs and Receptacles / How to Order• . .43, 44 MIL-DTL-38999 Series III Typical Markets: Military & Commercial Aviation• Military Vehicles• Missiles & Ordnance• C4ISR • Space Applications• AmphenolAerospace New Featured New Featured

TransientFiber OpticsOptions Others Matrix 2 Matrix Pyle Crimp Rear Release Matrix I II III High Speed Contacts SJT Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com AmphenolAerospace MIL-DTL-38999, Series III TV Performance Tri-StartTM MIL-DTL-38999 Series III with Metal Shells - Aluminum, Stainless Steel, Class K Firewall Composite Tri-Start, Qualiﬁed to MIL-DTL-38999, Rev. J Amphenol ® Tri-Start MIL-DTL-38999* Series III Connectors offer the highest performance capabilities for both general duty and severe environment applications. Meeting or exceeding MIL-DTL-38999 Series III requirements, the Tri-Start connector with standard metal shells (aluminum or stainless steel with several ﬁnish options) offers these features:

EMI Shielding - solid metal to metal coupling, grounding fingers, electroless nickel plating, and thicker wall sec tions provide superior EMI shielding capability of 65dB minimum at 10 GHz
Contact Protection - recessed pins in this 100% scoop-proof connector minimize potential contact damage
Moisture Resistance - improved interfacial seal design helps prevent electrolytic erosion of contacts
Corrosion Resistance - shells of stainless steel or cad mium over nickel plating withstand a 500 hour salt spray exposure
Vibration/Shock - operates under severe high tempera ture vibration, through 200°C
Firewall Capability - available in a stainless steel shell, class RK, RS
Lockwiring Eliminated - unique, self-locking, quick cou pling connector eliminates lockwiring
Quick Coupling - completely mates and self-locks in a 360° turn of the coupling nut
Inventory Support Commonality - uses standard MIL-DTL-38999 contacts, application tools, insert arrangements
Electrostatic Discharge Protection (ESD) - protection for sensitive circuitry without diodes, varistors, etc., with the use of the Faraday Cage principle which shunts high voltage, high current discharge events (see page 422)
Hermetic- air leakage limited to 1 X 10 -7 cm3 per second optional
Qualiﬁed Speciﬁcations - Stainless Steel qualified to BACC63DB and BACC63DC specifications MIL-Qualified to MIL-DTL-38999, Rev. K, the Amphenol Composite Tri-Start Connector offers a lightweight, corrosion resistant connector with the same high performance features as its metal counterpart. The Composite Tri-Start Connector also includes the following features:
Lightweight - 17% – 70% weight savings (17–40% weight savings vs. Aluminum) (60–70% weight savings vs. Stainless steel) See Composite weight comparison chart on page 20.
Corrosion Resistance - available in standard MIL-DTL-38999 olive drab cadmium (-65°C to 175°C) and electroless nickel plating (-65°C to 200°C), both with standing 2000 hours of salt spray exposure. The base mate- rial is able to withstand an indefinite exposure to salt spray.
Durability - 1500 couplings minimum (in reference to connector couplings, not contacts)
Extended Life Contact - Mil-approved plating process which provides 1500 couplings minimum
Qualified to BACC63CT and BACC63CU specifications The Tri-Start option CLUTCH-LOK offers all advantages of stainless steel/Class K ﬁrewall for MIL-DTL-38999 Series III connectors, plus a unique clutch design that actually tightens itself under vibration. Features include:
High degree of differential torque
No settling back to the next ratchet tooth
Completely intermateable with all existing MIL-DTL-38999 Series III connectors
Offers advantage in inaccessible, hard to reach areas where mating torque is difficult to apply and complete coupling is not verifiable by inspection See page 29 for description, 22 – 24 for ordering. CLUTCH-LOKTM MIL-DTL-38999 Series III High Vibration Connector * MIL-DTL-38999 Series III supersedes MIL-C-38999 Series III. Applicable Patents: Tri-StartTM Connector Patent 4,109,990. Composite Connector Patents: Clutch-Lok® Patent 6,152,753. Optional Shell Geometries Amphenol offers a number of different shell conﬁgurations to ﬁt your needs.
Deep Reach Shells - For increased panel thickness
Stand-off Flange Shells - For attachments to Printed Circuit boards.
Connector with Integral Strain Reliefs Series III

19 2648283723 III501526500 PylePrinted Circuit Board EMI Filter TransientFiber OpticsOptions Others Matrix Pyle Crimp Rear Release Matrix Matrix 2 High Speed Contacts 38999 I II IIISJT Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com AmphenolAerospace Performance Designed for Performance Numerous advantages in performance capability are designed into the Amphenol Tri-Start Connector. A positive metal to metal coupling design, grounding fingers, and elec troless nickel plating provide superior EMI shielding capabil ity of 65 dB minimum at 10 GHz. Acme threads provide coupling durability. Thicker wall sec tions and a greater coupling surface area improve strength and shock resistance. Blunting of the thread on both the coupling nut and receptacle eliminates cross coupling. The connector quickly mates and self locks in a 360° turn of the coupling nut. Elongated mounting holes permit the Tri-Start Connector to inter- mount with various existing MIL-Spec box or wall mount recep- tacles, giving it a design replacement advantage. Shells of stainless steel, or cadmium over nickel plating pre vent severe corrosion. Resistance is tested through expo sure to a 500 hour salt spray. Composite versions provide protection from salt spray exposure for 2000 hours. Other finish options are available; see how to order Tri-Start metal and Tri-Start Composite. Recessed pins minimize potential contact damage in this 100% scoop-proof connector. In a blind mating application, mating shells cannot “scoop” the pins and cause a shorting or bending of contacts. The design of the Amphenol Tri-Start interfacial seal meets the MIL-DTL-38999 Series III requirements for electrolytic erosion resistance. A rigid dielectric insert with excellent electrical characteris- tics provides durable protection to the contacts. The socket contacts are probe proof, and all contacts are rear remov- able. They are plated in the standard 50 micro inches minimum gold, with 100 micro inches as an option, and are available in standard Tri-Start insert arrangements and special Pyle® insert arrangements in sizes 10 power, 12, 16, 20 and 22D con tacts. Special insert patterns are also available with larger contacts in sizes 4 and 0. Series III, TV Tri-Start Connectors, offer more versatility & options than any other interconnection family! High reliability and increased versatility best describe Amphenol MIL-DTL-38999, Series III circular connectors. Originally designed for the harshest of environments and most demanding of applications, Amphenol MIL- DTL-38999 Series III, Tri-Start connectors continue to evolve in pace with the needs of an ever-changing market. Amphenol Tri-Start connectors can be configured with a number of application specific technologies like Filters, Hermetics, PC Tails, Fiber Optics, Flex, CLUTCH-LOK, Fail Safe, and contacts. Flexibility aids in design optimization through the combination of different technologies within a common, time-tested, harsh environment connector body. For more information about options please call 800-678-0141 or visit www.amphenol- aerospace.com. MIL-DTL-38999, Series III TV Options Composite Tri-Start, Qualified to MIL-DTL-38999, Rev. J

TransientFiber OpticsOptions Others Matrix 2 Matrix Pyle Crimp Rear Release Matrix I II III High Speed Contacts SJT Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com AmphenolAerospace MIL-DTL-38999, Series III TV Weight Comparisons (Composite vs. Metal) Tri-Start Weight in Ounces (includes contacts) Depending on the shell style, shell size and contact count, weight savings can range from 17% to 40% compared to standard aluminum product All weight measurements are for reference only. Wall Mount Receptacle (00 • Military D38999/20 Jam Nut Receptacle (07) • Military D38999/24 Plug (06) • Military D38999/26 Stainless Steel Aluminum Composite Stainless Aluminum Composite Stainless Steel Aluminum Composite Pin Socket Pin Socket Pin Socket Pin Socket Pin Socket Pin Socket Pin Socket Pin Socket Pin Socket Weight

21 2648283723 III501526500 PylePrinted Circuit Board EMI Filter TransientFiber OpticsOptions Others Matrix Pyle Crimp Rear Release Matrix Matrix 2 High Speed Contacts 38999 I II IIISJT Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com AmphenolAerospace TRI-START, SERIES III TYPICAL SHIELDING EFFECTIVENESS TEST DATA EMI/EMP SHIELDING EFFECTIVENESS dB TESTING BY TRIAXIAL METHOD TRI-START, SERIES III TYPICAL SHIELDING EFFECTIVENESS TEST DATA EMI/EMP SHIELDING EFFECTIVENESS dB TESTING BY MODE STIRRING METHOD Test data beyond 2GHz is subject to equipment variation. * Dependant on shell finish NOTE: For test data information on the new Clutch-Lok Tri-Start, high vibration connectors, consult Amphenol Aerospace. Amphenol® Tri-Start connectors provide EMI/EMP shielding capability which exceeds MIL-DTL-38999 Series III requirements. The TV and CTV Series III connector with standard solid metal to metal coupling, EMI grounding fin gers and conductive finishes has proven to be the ultimate in EMI/EMP shielding effectiveness. The charts il- lustrate shielding effectiveness data which is typical of Tri-Start connectors tested with the nickel finish (Class F-metal, Class M-composite) over a wide frequency range. The vibration capability of the Tri-Start Series is shown in the chart below. This illustrates the most severe vibration envelope of any qualified connec tor available today. These capabilities along with a +200°C, -65°C temperature rating and superior moisture sealing protection pro vide the user with a connector that can withstand the most rigorous application. TRI-START VIBRATION CRITERIA 140 120 100 100 200 300 400 500 600 700 800 NICKEL CLASS F , CLASS M TYPICAL SHIELD EFFECTIVENESS DATA FREQUENCY MEGAHERTZ NICKEL CLASS F , CLASS M MIL-DTL-38999 REQUIREMENTS LEAKAGE dB 140 120 100 1 2 3 4 5 NICKEL CLASS F , CLASS M TYPICAL SHIELD EFFECTIVENESS DA T A NICKEL CLASS F , CLASS M MIL-DTL-38999 REQUIREMENTS 6 7 8 9 10 FREQUENCY GIGAHERTZ LEAKAGE dB 5 50 500 5000 .0001 .001 .01 10. 10in/sec .06 in DA. 3 axes @ – 55 C ambient + 200 C*

60 G's

(Fail Safe: 3 axes @ ambient

30 G's)

2 axes @

200 C *

(Fail Safe: 2 axes @ ambient) 2 axes @ ambient 6dB/octave HERTZ DOUBLE AMPLITUDE (IN) SINE VIBRATION POWER SPECTRAL DENSITY (G2/HZ) RANDOM VIBRATION POWER SPECTRAL DENSITY G2/HZ MIL-DTL-38999, Series III TV Test Data

I II III High Speed Contacts SJT Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com AmphenolAerospace MIL-DTL-38999, Series III TV How to Order (Military and Commercial) Step 1. Select a Connector Type Commercial Shell Style Service Class Shell Size– Insert Arrangement Contact Type Alternate Keying Position Special Variations TVPS 00 RF 9-35 P B (XXX) Military Shell Style Service Class Shell Size– Insert Arrangement Contact Type Alternate Keying Position D38999/ 20 J G35 P N Designates TV Tri-Start Series Con- nector TVP Back panel mounted receptacle TVS 200° C rated TVPS Panel mounted, 200°C rated receptacle MTV CLUTCH-LOK connector with “MS” stamping (Note: remove dashes in how to order part number when ordering CLUTCH-LOK) CTV Composite MIL- DTL-38999 Series III Connector CTVP Panel mounted compos- ite receptacle CTVS 200° C rated, composite CTVPS Composite Panel mounted, 200° rated receptacle D38999 Military MIL-DTL-38999 Series III Connector Easy Steps to build a part number... Tri-Start Series III TV Step 2. Select a Shell Style Wall Mount Receptacle Line Receptacle Box Mount Receptacle Straight Plug Lanyard Release Plug Jam Nut Receptacle Flange Mounting Plug Deep Reach Receptacle Solder Mount Hermetic Receptacle CoMMeRCIAL M ILITARy Designates TVP , TVPS, CTVP, CTVPS TV, CTV TVS CTVS CLUTCH- L o K D38999 Military D38999 Military Composite MTV, D38999 CLUTCH- L o K 00 20 20 Wall Mount Receptacle

02 Box Mount

21 Box Mount

06 06 06 26 26 Straight Plug 07 07 07 24 24 Jam Nut Receptacle 09 09 Flange Mounted Plug

23 Jam Nut Receptacle

Receptacle, (Hermetic) Only 26 26 CLUTCH-LOK high vibration straight plug (service Classes RK & RS only

29 Lanyard release plug

30 Lanyard release plug

31 Lanyard release plug

32 Plug protection cap

33 Receptacle

I II III SJT Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com AmphenolAerospace Step 3. Select a Service Class Connector Type Shell Style Service Class Shell Size- Insert Arrg. Contact Type Alternate Position Special Variations RX MIL-DTL-38999, Series III TV How to Order (Military and Commercial) Step 4. Select a Shell Size & Insert Arr angement see pg. 4-7 Connector Type Shell Style Service Class Shell Size- Insert Arrg. Contact Type Alternate Position Special Variations 22-2 P Designates P Pin Contacts S Socket Contacts H 1500 Cycle Pin Contacts J 1500 Cycle Socket Contacts A Same as “P” except supplied less pin Contacts (For Military D38999 prefix only) B Same as “S” except supplied less socket contacts ( A & B designate nonstandard contact applications) (For Military D38999 prefix only) X Eyelet contacts, hermetics only Step 5. Select a Contact Type Shell Size & Insert Arrangement are on pages 4-7. First number represents Shell Size, second number is the Insert Arrangement. Quadrax or Differential Twinax: The incorporation of Quadrax or Differential Twinax contacts requires a modified connector to accommodate keyed contacts. D38999/26KJ20PN, is a series III stainless steel plug with twin axial and coaxial contacts that may not meet the firewall requirement of the specification. D38999/26KJ61HN, is a series III stainless steel plug with high durability contacts. However, the connector will be limited to 500 cycles of durability. Inser t arrangements using multi-axial (i.e. coax, twinax, triax shielded) contacts should not be used in firewall applications. * Consult Amphenol Aerospace, Sidney, NY for availability. **Coaxial arrangements are not available in these classes. TV, TVP CTV, CTVP CTVS, CTVPS TVS TVPS CLUTCH- LOK Military Finish Description RX C Anodic Coating Alternate finish, Non-conductive, anodic coated aluminum, 500 hour salt spray, 200°C. Consult Amphenol, Sidney NY for details, options and availability of non-cadmium or nickel finishes. RF Composite RF- Metal RF- Metal F-Metal M-Composite Electroless Nickel electroless nickel plated aluminum (composite) optimum EMI shielding effectiveness–65dB @ 10GHz specification min., 48 hour salt spray, 200°C (Composite-2000 hours dynamic salt spray). RGF Composite RGF- Metal Electroless Nickel electroless nickel plated ground plane aluminum (composite), 200°C G Electroless Nickel Space grade, electroless nickel, 48 hour salt spray, 200°C RGW- Metal RGW- Composite Olive Drab Cadmium Olive drab cadmium plated ground plane aluminum (composite), 175°C Stainless Steel Corrosion resistant stainless steel, firewall capability, plus 500 hour salt spray resistance, EMI –45 dB @ 10 GHz specification min., 200°C RL RL L Stainless Steel w/ Nickel Plate Corrosion resistant steel, electro deposited nickel, 500 hour salt spray, 200°C, non firewall RW- Metal RW- Composite W-Metal J-Composite Olive Drab Cadmium Corrosion resistant olive drab cadmium plate aluminum (composite), 500 hour salt spray, EMI –50 dB @ 10 GHz specification min., 175°C (Composite-2000 hours dynamic salt spray). Y Y Y Stainless Steel Hermetic seal, passivated stainless steel, 200°C RS* RS* RS* S Stainless Steel w/ Nickel Plate (Non-hermetic connectors), Nickel plated, corrosion resistant steel, firewall capability, 500 hour salt spray, 200° YN YN N Stainless Steel w/ Nickel Plate (Hermetic connectors), Nickel plated corrosion resistant steel, 200°C DT T Durmalon plated Nickel-PTFE alternative to Cadmium. Corrosion resistant, 500 hour salt spray, EMI-50dB at 10GHz specification min., 175°C ZN Z Zinc-Nickel Plated Zinc-Nickel Alternative to Cadmium corrosion resistant, 500 hour salt spray, Conductive, -65°C to +175°C

I II III High Speed Contacts SJT Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com AmphenolAerospace Step 6. Select an Alternate Keying Position AR° BR° CR° DR° K ey & Keyway or or or or Shell Arrang ement AP° BP° CP° DP° Siz e Identification Letter BSC BSC BSC BSC N* 105 140 215 265 A 102 132 248 320 B 118 230 312 C 140 205 275 D 155 234 304 E 131 197 240 141 208 236 11, A 113 156 182 292 13, B 145 195 252 and C 156 220 255 D 119 146 176 298 E 141 184 242 142 196 293 A 135 170 200 310 B 169 200 244 and C 140 200 257 D 145 180 280 E 153 197 272 142 196 293 21, A 135 170 200 310 23, B 169 200 244 and C 140 200 257 D 145 180 280 E 153 197 272 142 188 293 25L, A 135 170 188 310 33, B 169 188 244 and C 140 188 257 D 145 188 280 E 153 188 272 Key/Keyway Position A plug with a given rotation letter will mate with a receptacle with the same rotation letter. The angles for a given connec- tor are the same whether it contains pins or sockets. Master key stay fixed, minor keys rotate. Inserts are not rotated in conjunction with the master key/keyway. PLUG (front face shown) RECEPTACLE (front face shown)MAIN KEYWAY AP BSC BP BSC DP BSCCP BSC DR BSC˚ CR BSC BR BSC AR BSC MAIN KEYWAY MIL-DTL-38999, Series III TV How to Order (Military and Commercial) Connector Type Shell Style Service Class Shell Size- Insert Arrg. Contact Type Alternate Position Special Variations P B Step 7. Special Variations Consult Amphenol Aerospace, Sidney NY for variations. Connector Type Shell Style Service Class Shell Size- Insert Arrg. Contact Type Alternate Position Special Variations P (xxx) * An “N” designation is used on D38999 military part number but not on the commercial versions

25 2648283723 III501526500 PylePrinted Circuit Board EMI Filter TransientFiber OpticsOptions Others Matrix Pyle Crimp Rear Release Matrix Matrix 2 High Speed Contacts 38999 I II IIISJT Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com AmphenolAerospace Boeing Basic Number Style Shell Size Shell Finish & Contact Insert Arrangement Contact Type Alternate Keying Position Ordering Option BACC63 CT 15 — 19 P N H Easy Steps to build a part number... Boeing BACC63 CT & CU Step 1. Boeing Number BACC63 Step 2. Select a Style Designates CT Composite Plug CU Composite Receptacle Step 3. Shell Size 15 Step 4. Select a Shell Finish & Contact Designates C CT Style Only. Cadmium Plated, Grounded D Cadmium Plated, ungrounded G Nickel Plated, Grounded — Nickel Plated, Ungrounded Step 6. Select a Contact Type Designates P Pin S Socket Step 7. Select an Alternate Keying Position Boeing Basic Number Style Shell Size Separator Insert Arrangement Contact Type Alternate Keying Position Ordering Option BACC63 DB 15 — 19 P N H BACC63 DC 17 — 8 P N H Easy Steps to build a part number... Boeing BACC63 DB & DC Step 1. Boeing Number BACC63 Step 2. Select a Style Designates DB Stainless Steel Plug DC Stainless Steel Receptacle Step 3. Select a Shell Size Step 4. Separator Designates 9-25 Shell Size Step 5. Insert Arrangements- Consult Amphenol Aerospace for insert Arrangements available. Step 6. Select a Contact Type Designates P Pin S Socket Step 7. Select an Alternate Keying Position Step 8. Ordering Option Designates H Without Contacts & Seal Plugs Blank With contacts and seal plugs Step 8. Ordering Option Designates H Without Contacts & Seal Plugs Blank With contacts and seal plugs Designates N Normal A-E Alternates Designates

15 One Shell Size

— Separator Boeing BACC63 How to Order Composite Stainless Steel Step 5. Insert Arrangements- Consult Amphenol Aerospace for insert Arrangements available.

4 PLACES

2 PLACES

LL (TV) LL (CTV)1 M (TV) M (CTV)

1 L (TV)

L (CTV)

1.240 MAX

31.50 MAX

BAND† BLUE BAND†† –A– Z (TV) Z (CTV)1 .861 MAX

21.87 MAX

(TV) .909 MAX

23.09 MAX

(CTV)

1.037 MAX

26.34 MAX

(TV)

1.084 MAX

27.53 MAX

(CTV) D VIEW D FOR SIZE 8 TWINAX ONLY, RELATIVE TO VIEW D FOR SIZE 8 COAXIAL ONLY, RELATIVE TO –A– –A– † Red band indicates fully mated †† Blue band indicates rear release contact retention system Millimeters Inches All dimensions for reference only Designates true position dimensioning BACK PANEL MOUNTING FRONT PANEL MOUNTING PANEL HOLE DIMENSIONS TVP00R (D38999/20) - Crimp, Metal CTVP00R (D38999/20) - Crimp, Composite Wall Mounting Receptacle Shell Size MS Shell Size Code B Thread Class 2A 0.1P=0.3L- TS (Plated) L Max. (TV) Max. (CTV) M +.000 –.005 (TV) +.000 –.005 (CTV) R1 R2 S Max. T ±.008 Max. (TV) Max. (CTV) Back Panel Mount Front Panel Mount AA Max. Panel Thick- ness LL +.006 –.000 (TV) LL1 ±.005 (CTV) TT ±.008 Shell Size MS Shell Size Code L Max. (TV) Max. (CTV) M +.00 –.13 (TV) +.00 –.13 (CTV) R1 R2 S Max. T ±.20 V Thread Metric Max. (TV) Z1 Max. (CTV) Back Panel Mount Front Panel Mount AA Max. LL +.15 –.00 (TV) LL1 ±.13 (CTV) TT ±.20 METAL TVP 00 RW 9-35 P B (453) TVPS 00 RK X-X X X (XXX) TVPS 00 RF X-X X X (XXX) TVPS 00 RS X-X X X (XXX) CTVP 00 RW X-X X X (XXX) CTVPS 00 RF X-X X X (XXX) D38999/ 20 X X-X X X NA Connector Type Shell Style Service Class Shell Size & Insert Arrg Contact Type Alternate Position Special Variations To complete, see how to order pages 22-24. PART #

27 2648283723 III501526500 PylePrinted Circuit Board EMI Filter TransientFiber OpticsOptions Others Matrix Pyle Crimp Rear Release Matrix Matrix 2 High Speed Contacts 38999 I II IIISJT Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com AmphenolAerospace † Red band indicates fully mated †† Blue band indicates rear release contact retention system Consult Amphenol Aerospace for availability of composite box mount receptacles. Millimeters Inches M (TV) M (CTV) LL (TV) LL (CTV) AA B THREAD BLUE BAND RED BAND L (TV) L (CTV)1 Z (TV) Z (CTV) M M .005 .13 T S All dimensions for reference only Designates true position dimensioning BACK PANEL MOUNTING FRONT PANEL MOUNTING PANEL HOLE DIMENSIONS TVP02R – Crimp, Metal CTVP02R – Crimp, Composite Box Mounting Receptacle Shell Size MS Shell Size Code B Thread Class 2A 0.1P=0.3L- TS (Plated) L Max. (TV) Max. (CTV) M +.000 –.005 (TV) +.000 –.005 (CTV) R1 R2 S Max. T ±.008 Max. (TV) Max. (CTV) Back Panel Mount Front Panel Mount AA Max. Panel Thick- ness LL +.006 –.000 (TV) LL1 ±.005 (CTV) TT ±.008 Shell Size MS Shell Size Code L Max. (TV) L Max. (CTV) M +.00 –.13 (TV) M +.00 –.13 (CTV) R 1 R2 S Max. T ±.20 Max. (TV) Z Max. (CTV) A

1 Back

A Front Panel Mount AA Max. LL +.15 –.00 (TV) LL1 ±.13 (CTV) TT ±.20 METAL TVP 02 RW 9-35 P B (453) TVPS 02 RK X-X X X (XXX) TVPS 02 RF X-X X X (XXX) TVPS 02 RS X-X X X (XXX) CTVP 02 RW X-X X X (XXX) CTVPS 02 RF X-X X X (XXX) Connector Type Shell Style Service Class Shell Size & Insert Arrg Contact Type Alternate Position Special Variations To complete, see how to order pages 22-24. PART #

1.234 MAX

31.34 MAX

1.220 MAX

31.00 MAX B THREAD

D V THREAD .359 MAX

9.12 MAX

.359 MAX .591 +.003 –.000 15.01 +.08 –.00 BLUE BAND Q

1.656 MAX

42.06 MAX

1.797 MAX

45.64 MAX

FOR SIZE 8 TWINAX ONLY, RELATIVE TO VIEW D FOR SIZE 8 COAXIAL ONLY, RELATIVE TO –A– –A– –A– V THREAD .591 +.003 –.000 15.01 +.08 –.00 –A– Q B THREAD D BLUE BAND† † Blue band indicates rear release contact retention system All dimensions for reference only. Inches Millimeters COMPOSITE TV06R (D38999/26) – Crimp, Metal CTV06R (D38999/26) – Crimp, Composite Straight Plug Shell Size MS Shell Size Code B Thread 0.1P-0.3L-TS-2B (Plated) Q Dia. Max. 9 A .6250 .858 11 B .7500 .984 13 C .8750 1.157 15 D 1.0000 1.280 17 E 1.1875 1.406 19 F 1.2500 1.516 21 G 1.3750 1.642 23 H 1.5000 1.768 25 J 1.6250 1.890 Shell Size MS Shell Size Code Q Max. V Thread Metric 9 A 21.8 M12X1-6g 11 B 25.0 M15X1-6g 13 C 29.4 M18X1-6g 15 D 32.5 M22X1-6g 17 E 35.7 M25X1-6g 19 F 38.5 M28X1-6g 21 G 41.7 M31X1-6g 23 H 44.9 M34X1-6g 25 J 48.0 M37X1-6g METAL TV 06 RW 9-35 P B (453) TVS 06 RK X-X X X (XXX) TVS 06 RF X-X X X (XXX) TVS 06 RS X-X X X (XXX) CTV 06 RW X-X X X (XXX) CTVS 06 RF X-X X X (XXX) D38999/ 26 X X-X X X NA Connector Type Shell Style Service Class Shell Size & Insert Arrg Contact Type Alternate Position Special Variations To complete, see how to order pages 22-24. PART # METAL

29 2648283723 III501526500 PylePrinted Circuit Board EMI Filter TransientFiber OpticsOptions Others Matrix Pyle Crimp Rear Release Matrix Matrix 2 High Speed Contacts 38999 I II IIISJT Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com AmphenolAerospace Designed for high vibration and harsh environments such as aircraft gas turbine engines, the CLUTCH-LOK is also an ideal choice for demanding applications such as aircraft, space and military ground vehicles. The unique clutch design of the Amphenol CLUTCH-LOK means that you don’t have to compromise the need for quick, smooth mating of plugs and receptacles in order to get increased uncoupling torque. The CLUTCH-LOK has proven to not only remain mated and pass all the Series III specification requirements, it also has proven to actually tighten itself under vibration. This is a powerful advantage over the traditionally high vibration application connectors. The CLUTCH-LOK is also a tremendous advantage in inaccessible, hard to reach areas where mating torque is difficult to apply and complete coupling is not verifiable by inspection. CLUTCH-LOK features and benefits:

High degree of differential torque
Infinite free coupling and positive metal-to-metal bottoming with each mating
No settling back to the next ratchet tooth
Available with stainless steel shells and Class K firewall inserts
All the advantages of MIL-DTL-38999 Series III including EMI/RFI shielding, electrolytic erosion resistance and contact protection with recessed pins
Enhanced connector performance at affordable prices
Completely intermateable with all existing MIL-DTL-38999 Series III connectors
Fully QPL ’d † Blue band indicates rear release contact retention system All dimensions for reference only. Inches Millimeters

D V THREAD .359 MAX 9.12 MAX .591 +.003 –.000 15.01 +.08 –.00 BLUE BAND Q FOR SIZE 8 COAXIAL ONLY, RELATIVE TO –A– –A– TV26/MTV26 – Crimp, Metal CLUTCH-LOK™ Plug For High Vibration Applications Shell Size MS Shell Size Code B Thread 0.1P-0.3L-TS-2B (Plated) Q Dia. Max. 9 A .6250 .858 11 B .7500 .984 13 C .8750 1.157 15 D 1.0000 1.280 17 E 1.1875 1.406 19 F 1.2500 1.516 21 G 1.3750 1.642 23 H 1.5000 1.768 25 J 1.6250 1.890 Shell Size MS Shell Size Code Q Max. V Thread Metric 9 A 21.8 M12X1-6g 11 B 25.0 M15X1-6g 13 C 29.4 M18X1-6g 15 D 32.5 M22X1-6g 17 E 35.7 M25X1-6g 19 F 38.5 M28X1-6g 21 G 41.7 M31X1-6g 23 H 44.9 M34X1-6g 25 J 48.0 M37X1-6g Alternate Positions- “N” shows normal polarization TV 26 RK 9-35 P N (453) TV 26 RS X-X X N (XXX) MTV 26 RK X-X X N (XXX) MTV 26 RS X-X X N (XXX) Connector Type Shell Style Service Class Shell Size & Insert Arrg Contact Type Alternate Position Special Variations To complete, see how to order pages 22-24. PART # For parts with MS Stamping use MTV26( ) part number as shown above.

9.60 MAX

1.280 MAX

32.51 MAX

SHELL SIZES 9/11 – .871 22.12 SHELL SIZES 13/25 – .878 22.30 .091 MAX

2.31 MAX

D RED BAND –A– .794 MAX

20.17 MAX

.940 MAX

23.88 MAX

FOR SIZE 8 TWINAX ONLY, RELATIVE TO VIEW D FOR SIZE 8 COAXIAL ONLY, RELATIVE TO –A– –A– † Red band indicates fully mated †† Blue band indicates rear release contact retention system ★ .059 dia min. 1.5 dia min., 3 lockwire holes Formed lockwire hole design (6 holes) is optional Millimeters All dimensions for reference only NOTE: Deep reach receptacles are available for panel thicknesses up to .750 max. PANEL HOLE DIMENSIONS JAM NUT D-HOLE MOUNTING Inches TV07R (D38999/24) – Crimp, Metal CTV07R (D38999/24) – Crimp, Composite Jam Nut Receptacle Shell Size MS Shell Size Code B Thread Class 2A 0.1P- 0.3L-TS (Plated) C Max. +.010 –.000 +.000 –.010 H Hex +.017 –.016 S ±.010 Shell Size MS Shell Size Code C Max. +.25 –.00 +.00 –.25 H Hex +.43 –.41 S ±.25 V Thread Metric TV 07 RW 9-35 P B (453) TVS 07 RK X-X X X (XXX) TVS 07 RF X-X X X (XXX) TVS 07 RS X-X X X (XXX) CTV 07 RW X-X X X (XXX) CTVS 07 RF X-X X X (XXX) D38999/ 24 X X-X X X NA Connector Type Shell Style Service Class Shell Size & Insert Arrg Contact Type Alternate Position Special Variations To complete, see how to order pages 22-24. PART #

31 2648283723 III501526500 PylePrinted Circuit Board EMI Filter TransientFiber OpticsOptions Others Matrix Pyle Crimp Rear Release Matrix Matrix 2 High Speed Contacts 38999 I II IIISJT Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com AmphenolAerospace GG (TV) GG (CTV)1 S (TV) S (CTV) B THREAD LL (TV) LL (CTV) M (TV) M (CTV) .280 MIN FULL THD

7.11 MIN FULL THD

L (TV) L (CTV) Z (TV) Z (CTV) 1.240MAX D –A– RED BAND BLUE BAND .861 MAX (TV) .909 MAX (CTV) (TV) (CTV) VIEW D FOR SIZE 8 TWINAX ONLY, RELATIVE TO VIEW D FOR SIZE 8 COAXIAL ONLY, RELATIVE TO –A– –A– † Red band indicates fully mated †† Blue band indicates rear release contact retention system Millimeters All dimensions for reference only Inches TV01R – Crimp, Metal CTV01R – Crimp, Composite Line Receptacle Shell Size MS Shell Size Code B Thread 0.1P-0.3L- TS-2A (Plated) M +.000 –.005 (TV) +.000 –.005 (CTV) L Max. (TV) Max. (CTV) S ±.010 (TV) S1 ±.010 (CTV) Z Max (TV) Z1 Max (CTV) GG ±.010 (TV) GG1 ±.010 (CTV) LL +.006 –.000 (TV) LL1 ±.005 (CTV) Shell Size MS Shell Size Code M +.00–.013 (TV) +.00 –.13 (CTV) L Max. (TV) Max. (CTV) S ±.25 (TV) ±.010 (CTV) V Thread Metric Z Max (TV) Z1 Max (CTV) GG ±.25 (TV) GG1 ±.25 (CTV) LL +.15 –.00 (TV) LL1 ±.13 (CTV) TV 01 RW 9-35 P B (453) TVS 01 RF X-X X X (XXX) CTV 01 RW X-X X X (XXX) CTVS 01 RF X-X X X (XXX) Connector Type Shell Style Service Class Shell Size & Insert Arrg Contact Type Alternate Position Special Variations To complete, see how to order pages 22-24. PART #

3.59 MAX

M.005 M.13 .138-32UNC-2B HELICAL COIL–A– R R FOR SIZE 8 TWINAX ONLY, RELATIVE TO VIEW D FOR SIZE 8 COAXIAL ONLY, RELATIVE TO –A– –A– D † Blue band indicates rear release contact retention system Millimeters All dimensions for reference only Designates true position dimensioning Partially tooled. Consult Amphenol Aerospace for availability Inches Shell Size MS Shell Size Coded B Thread 0.1P-0.3L-TS-2A (Plated) G ±.060 Q Dia. Max R GG Dia ±.005 R GG Dia Shell Size MS Shell Size Coded G ±.1.52 Q Dia. Max R GG Dia ±.13 9 A 28.09 21.82 26.37 46.69 11 B 28.09 24.62 28.32 49.48 13** C 28.09 28.98 31.50 53.95 15 D 28.09 32.16 33.71 57.10 17 E 28.09 35.33 35.99 60.33 19 F 34.44 38.10 39.55 63.37 21 G 34.44 41.28 41.25 65.23 23 H 34.44 44.45 43.51 69.16 25 J 34.44 47.63 45.75 72.34 TV 09 RW 9-35 P B (453) TVS 09 RF X-X X X (XXX) Connector Type Shell Style Service Class Shell Size & Insert Arrg Contact Type Alternate Position Special Variations To complete, see how to order pages 22-24. PART # TV09R – Crimp, Metal Flange Mounting Plug

33 2648283723 III501526500 PylePrinted Circuit Board EMI Filter TransientFiber OpticsOptions Others Matrix Pyle Crimp Rear Release Matrix Matrix 2 High Speed Contacts 38999 I II IIISJT Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com AmphenolAerospace † Red band indicates fully mated NOTE: Consult Amphenol Aerospace for availability of non-glass-sealed versions with printed circuit tail contacts. Millimeters All dimensions for reference only Designates true position dimensioning Inches S R 4 PLACES .005 .13 M M T BAND† .250 MAX

6.35 MAX

.913 +.011 –.000 23.19 +.28 –.00 .093 +.006 –.000 2.36 +.15 –.00 TVPS02Y (D38999/21) – Hermetic Stainless Steel Box Mounting Receptacle Shell Size MS Shell Size Coded B Thread 0.1P-0.3L-TS (Plated) R1 R2 S ±.010 T ±.008 TT ±.008 Shell Size MS Shell Size Coded R1 R2 S ±.25 T ±.20 TT ±.20 R1 R2 S R1 R2 S TVPS 02 Y 9-35 P B (453) TVPS 02 YN X-X X X (XXX) D38999/ 21 X X-X X X NA Connector Type Shell Style Service Class Shell Size & Insert Arrg Contact Type Alternate Position Special Variations To complete, see how to order pages 22-24. PART #

TransientFiber OpticsOptions Others Matrix 2 Matrix Pyle Crimp Rear Release Matrix I II III High Speed Contacts SJT Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com AmphenolAerospace † Red band indicates fully mated ★ . 059 dia min. 1.5 dia min. Formed lockwire hole design (6 holes) is optional. 3 lockwire holes Millimeters Inches All dimensions for reference only • D shaped panel cut-out dimensions C H S .200 MAX

5.08 MAX

BAND†B THREAD L PANEL THICKNESS .062 MIN .125 MAX 1.57 MIN 3.18 MAX SHELL SIZES 9/11 – .871 22.12 SHELL SIZES 13/25 – .878 22.30 PANEL HOLE DIMENSIONS JAM NUT D-HOLE MOUNTING TVS07Y (D38999/23) – Hermetic Stainless Steel Jam Nut Receptacle Shell Size MS Shell Size code A• +.000 –.010 B Thread Class 2A 0.1P- 0.3L-TS (Plated) C Max D1 +.010 –.000 D1 +.000 –.010 H Hex +.017 –.016 L Max S ±.010 T• +.010 –.000 KK +.011 –.000 Shell Size MS Shell H Hex +.43 –.41 L Max S ±.25 T• +.25 –.00 KK +.28 –.00 TVS 07 Y 9-35 P B (453) TVS 07 YN X-X X X (XXX) D38999/ 23 X X-X X X NA Connector Type Shell Style Service Class Shell Size & Insert Arrg Contact Type Alternate Position Special Variations To complete, see how to order pages 22-24. PART #

35 2648283723 III501526500 PylePrinted Circuit Board EMI Filter TransientFiber OpticsOptions Others Matrix Pyle Crimp Rear Release Matrix Matrix 2 High Speed Contacts 38999 I II IIISJT Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com AmphenolAerospace MillimetersInches All dimensions for reference only † Red band indicates fully mated GG B THREAD RED BAND † .375 MAX

9.53 MAX

M L .031+.006 –.005 .79 +.15 –.13 GG B THREAD RED BAND † L M .375 MAX MillimetersInches† Red band indicates fully mated TVSIY (D38999/25) – Hermetic Stainless Steel Solder Mounting Receptacle TVSHIY (D38999/27) – Hermetic, Stainless Steel Weld Mounting Receptacle Shell Size MS Shell Size Code B Thread Class 2A 0.1P-0.3L-TS (Plated) L +.011 –.005 M +.006 –.005 GG Dia. +.011 –.010 KK Dia +.011 –.005 Shell Size MS Shell Size Code L +.28 –.00 M +.15 –.13 GG Dia. +.28 –.25 KK Dia +.03 –.13 9 A 20.47 3.18 19.05 17.07 11 B 20.47 3.18 21.44 19.84 13 C 20.47 3.18 24.61 23.01 15 D 20.47 3.18 27.79 26.19 17 E 20.47 3.18 30.94 29.36 19 F 20.47 3.18 33.32 31.75 21 G 20.47 3.18 36.53 34.93 23 H 21.29 3.96 39.70 38.10 25 J 21.29 3.96 42.88 41.28 Shell Size MS Shell Size Code B Thread Class 2A 0.1P-0.3L-TS (Plated) L +.011 –.000 M +.006 –.005 GG Dia. +.011 –.010 9 A .6250 .806 .125 .973 11 B .7500 .806 .125 1.095 13 C .8750 .806 .125 1.221 15 D 1.0000 .806 .125 1.347 17 E 1.1875 .806 .125 1.434 19 F 1.2500 .806 .125 1.579 21 G 1.3750 .806 .125 1.721 23 H 1.5000 .838 .156 1.886 25 J 1.6250 .838 .156 1.973 Shell Size MS Shell Size Code L +.28 –.00 M +.15 –.13 GG Dia. +.25 –.00 9 A 20.47 3.18 24.71 11 B 20.47 3.18 27.81 13 C 20.47 3.18 31.01 15 D 20.47 3.18 34.21 17 E 20.47 3.18 36.42 19 F 20.47 3.18 40.11 21 G 20.47 3.18 43.71 23 H 21.29 3.96 47.90 25 J 21.29 3.96 50.11 TVS I Y 9-35 P B (453) TVS I YN X-X X X (XXX) D38999/ 25 X X-X X X NA Connector Type Shell Style Service Class Shell Size & Insert Arrg Contact Type Alternate Position Special Variations To complete, see how to order pages 22-24. PART # TVS HI Y 9-35 P B (453) TVS HI YN X-X X X (XXX) D38999/ 27 X X-X X X NA Connector Type Shell Style Service Class Shell Size & Insert Arrg Contact Type Alternate Position Special Variations To complete, see how to order pages 22-24. PART #

TransientFiber OpticsOptions Others Matrix 2 Matrix Pyle Crimp Rear Release Matrix I II III High Speed Contacts SJT Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com AmphenolAerospace Amphenol® Tri-Start Breakaway Fail Safe Connectors provide unequaled performance in environments requiring instant disengagement. Designed to provide quick disconnect of a connector plug and receptacle with an axial pull on the lanyard, the “Breakaway” Fail Safe connector family offers a wide range of electrical and mechanical features:

Instant decoupling and damage free separation
Completely intermateable with standard receptacles (D38999/20 and /24)
Inventory support commonality through the use of standard insert arrangements and contacts Breakaway un-mating is initiated by applying a pull force to the lanyard which causes the operating sleeve on the plug to move away from the receptacle. Coupling segments on the plug then move away from the mating receptacle while expanding, thus releasing the receptacle. After completion of the un-mating sequence, spring compression returns the sleeve and segments to their original positions. Un-mating of the plug may also be accomplished by normal rotation of the coupling ring without affecting the breakaway capability. The Tri-Start Breakaway Fail Safe connector exceeds the MIL-Spec Series III requirements for EMI/EMP shielding and features include:
Solid metal-to-metal coupling
EMI grounding fingers
Conductive finishes Amphenol Breakaway Fail Safe connectors are qualified to MIL-DTL-38999/29, /30 and /31 (for MIL-STD-1760 Stores Management applications). In fact, Amphenol offers more qualified Breakaway shell size and insert combinations than any other QPL supplier. In addition to standard Breakaway connectors, Amphenol also manufactures custom breakaway connectors including those with:
Highly durable non-metallic operating sleeves in a variety of lengths and diameters
Increased pull-force capability
Low-profile designs
Custom lanyard lengths and backshells
Low force separation capabilities
Low insertion/separation force contacts
Non-cadmium finishes Whether you need a standard Breakaway, one of our custom Breakaways or, a unique Breakaway design, please contact your local Amphenol representative. Contact Amphenol Aerospace for more information on breakaway, quick-disconnect connectors. Other Amphenol circular families (MIL-DTL-26482, MIL-DTL-83723) also offer breakaway quick-disconnect connectors. See accessories for breakaway connectors on page 90. Breakaway with Coax Contacts Special configuration Fail Safe used on space telescope application. Lanyard is replaced by a swivel ring for remote disconnect and “wing arms” have been added for manual actuation accessibility by gloved astronauts. Amphenol offers a variety of lanyard plug styles including MIL-STD-1760 types 1, 2 and 6 for Stores Management applications. Series III, TV Breakaway Fail Safe Connectors Quick-Disconnect with an Axial Pull of Lanyard TYPE 2 TYPE 6 TYPE 1

37 2648283723 III501526500 PylePrinted Circuit Board EMI Filter TransientFiber OpticsOptions Others Matrix Pyle Crimp Rear Release Matrix Matrix 2 High Speed Contacts 38999 I II IIISJT Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com AmphenolAerospace D .374 MAX

9.50 MAX

DURING UNMATING THREAD RELEASE LANYARD PULLED TAUT AGAINST A .500 ±.031 12.70 ±.79 DIA MANDREL V THREAD METRIC

1.781 MAX

45.24 MAX

2.375 MAX

60.33 MAX

B .359 MAX (See Lanyard Length Table) † Blue band indicates rear release contact retention system Millimeters All dimensions for reference only Inches D38999/29 & D38999/30 – Series III TV Breakaway Fail Safe-Crimp, Metal Lanyard Release Plug Shell Size MS Shell Size Code B Max D Max Accessory Dia. 11 B 1.846 1.109 13 C 1.972 1.250 15 D 2.079 1.375 17 E 2.205 1.500 19 F 2.301 1.625 21 G 2.472 1.750 23 H 2.594 1.875 25 J 2.705 2.000 Shell Size MS Shell Size Code B Max D Max Accessory Dia. V Thread Metric 11 B 46.89 28.17 M15X1.0-6g 13 C 50.09 31.75 M18X1.0-6g 15 D 52.81 34.93 M22X1.0-6g 17 E 56.01 38.10 M25X1.0-6g 19 F 58.45 41.28 M28X1.0-6g 21 G 62.79 44.45 M31X1.0-6g 23 H 65.89 47.63 M34X1.0-6g 25 J 68.71 50.08 M37X1.0-6g METAL D38999 29 29 E P D38999 30 X-X X X 88 5565 X-X X X 91 5565 X-X X X Connector Type Shell Style Shell Size & Insert Arrg Lanyard Length Code Contact Type/ Alternate Insert Rotation To complete, see how to order pages 38-39. PART # (Pins Only) (Sockets Only)

I II III High Speed Contacts SJT Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com AmphenolAerospace TV D38999/29 & D38999/30 – Series III Breakaway Fail Safe Lanyard Release Plug Options Commercial Basic Part# Shell & Insert Arrg. Code Shell Size- Insert Arrangement Military Shell Size- Insert Arrangement Service Rating Total Contacts Contact Size 22D 20 16 12 12 Coax Coax Twinax 88/91-556508 11-2 * I 2 2 06 11-35 * M 13 13 07 11-98 * I 6 6 10 13-4 * I 4 4 11 13-8 * I 8 8 14 13-35 * M 22 22 13 13-98 * I 10 10 18 15-5 * II 5 5 23 15-15 * I 15 14 1 22 15-18 * I 18 18 19 15-19 * I 19 19 20 15-35 * M 37 37 21 15-97 * I 12 8 4 33 17-2 E-2 M 39 38 1 27 17-6 E-6 I 6 6 28 17-8 E-8 II 8 8 29 17-26 E-26 I 26 26 30 17-35 E-35 M 55 55 31 17-99 E-99 I 23 21 2 37 19-11 F-11 II 11 11 41 19-18 F-18 M 18 14 4 38 19-28 F-28 I 28 26 2 39 19-32 F-32 I 32 32 40 19-35 F-35 M 66 66 47 21-11 G-11 I 11 11 48 21-16 G-16 II 16 16 49 21-35 G-35 M 79 79 51 21-39 G-39 I 39 37 2 50 21-41 G-41 I 41 41 57 23-21 H-21 II 21 21 58 23-35 H-35 M 100 100 59 23-53 H-53 I 53 53 61 23-54 * M 53 40 9 4 60 23-55 * I 55 55 71 25-4 J-4 I 56 48 8 63 25-7 J-7 M/Twinax 99 97 2 64 25-8 J-8 Twinax 8 8 66 25-19 J-19 I 19 19 74 25-20 J-20 N 30 10 13 4 3 72 25-24 J-24 I 24 12 12 67 25-29 J-29 I 29 29 68 25-35 J-35 M 128 128 69 25-43 J-43 I 43 23 20 65 25-46 * I 46 40 4 2* 70 25-61 J-61 I 61 61 73 25-90 J-90 I 46 40 4 2 Step 2. Select a Specification Sheet Number DOD Number Prefix Spec Sheet Number Service Class Shell Size Insert Arrangement Lanyard Length Code Alternate Keying Position D38999/ 29 F E 6 P N Easy Steps to build a part number... Military Step 3. Select a Service Class Step 4. & 5 Insert Availability Step 1. DOD Number Prefix D38999/ designates MIL-DTL-38999, Series III, Tri-Start Connector

29 Designates Lanyard Release Plug with pin contacts

30 Designates Lanyard Release Plug with socket contacts

F Designates electroless nickel plated aluminum, optimum EMI shielding effectiveness –65dB@10 GHz specification min., 48 hour salt spray, 200°C W Designates corrosion resistant olive drab cadmium plate aluminum, 500 hour extended salt spray, EMI –50dB@10 GHz specification min., 175°C *Not Mil Qualified

39 2648283723 III501526500 PylePrinted Circuit Board EMI Filter TransientFiber OpticsOptions Others Matrix Pyle Crimp Rear Release Matrix Matrix 2 High Speed Contacts 38999 I II IIISJT Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com AmphenolAerospace FAIL SAFE 88-5565( ) & 91-5565( ) Ordering procedure for example part number 88-556529-EP is shown below: D38999/29 & D38999/30 – Series III TV Breakaway Fail Safe Lanyard Release Plug Lanyard Length (in.) ± .236 Lanyard Length (mm) ± 6.0 Lanyard Length Code For Part Number 4.016 102 A 4.528 115 B 5.000 127 C 5.512 140 D 6.024 153 E 6.535 166 F 7.008 178 G 7.520 191 H 7.992 203 I 8.503 216 J 9.016 229 K 9.528 242 L 10.000 254 M 10.512 267 N 11.024 280 P 11.535 293 R 12.008 305 S 12.520 318 T 13.031 331 U 14.016 356 V 15.000 381 W 16.024 407 X 17.008 432 Y 18.031 458 Z Service Class Connector Type Identification Shell Size & Insert Arrg. Code Required Field Lanyard Length Code Contact Type/Alter- nate Keying Position 88 5565 29 0 E P Easy Steps to build a part number... Commercial These are standard finishes. Consult Amphenol Aerospace, Sidney, NY for other variations. Step 1. Select a Service Class Step 2. Select a Connector Type Identification Step 3. Select a Commercial Shell Size & Insert Arrangement Code MIL-DTL-38999, see insert availability chart on page 38. P designates pin, S designates socket for normal positioning of contacts. When an alternate position of the connector is required to prevent cross-mating, a different letter (other than P or S) is used. See alternate positioning on page 24, then convert to Amphenol Commercial coding by the following chart. Step 6. Select a Contact Type/Alternate Keying Position Step 6. Military/ Commercial Lanyard Length Code Pin Contacts Socket Contacts MS Letter Amphenol letter MS Letter Amphenol Letter PN P (normal) SN S (normal) PA G SA H PB I SB J PC K SC L PD M SD N PE R SE T Step 5. Select a Lanyard Length Code See Table II (to the left) for lanyard length code number. For alternate positions of connector (to prevent cross-mating) see alternate positioning on page 24. (N indicates normal) Step 7. Military Alternate Keying Position Table II Step 4. Required Field

88 Designates corrosion resistant olive drab cadmium plate over nickel, 500

hour extended salt spray, EMI –50dB @ 10 GHz specification min., 175°C

91 Designates electroless nickel plated aluminum, optimum EMI shielding ef-

fectiveness –65dB @ 10 GHz specification min., 48 hour salt spray, 200°C

5565 Designates MIL-DTL-38999, Series III Tri-Start Lanyard Release Plug

0 The required field is always a 0

TV D38999/29 & D38999/30 – Series III Breakaway Fail Safe Lanyard Release Plug Options

TransientFiber OpticsOptions Others Matrix 2 Matrix Pyle Crimp Rear Release Matrix I II III High Speed Contacts SJT Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com AmphenolAerospace Designates F Electroless nickel plated aluminum, optimum EMI shielding effectiveness –65dB @ 10 GHz specification min., 48 hour salt spray, 200°C W Corrosion resistant olive drab cadmium plate aluminum, 500 hour extended salt spray, EMI –50dB @ 10 GHz specification min., 175°C Designates D38999/ MIL-DTL-38999, Series III Tri-Start Connectors Designates

31 Designates Lanyard Release Plug for

MIL-STD-1760 with pin contacts

2.008 MAX

51.00 MAX

BAND†

1.687 MAX

42.85 MAX

2.030 MAX

51.56 MAX

.100 MAX

2.54 MAX

2.000 MAX

50.80 MAX

ACCESS. DIA LANYARD LENGTH (See Lanyard Length Table) METRIC THREAD M37X 1.0-6g0.100R ACCESS. DIA .374 MAX .359 MAX 9.12 MAX2.705 MAX

68.71 MAX

BAND † (See Lanyard Length Table) METRIC THREAD M37X 1.0-6g 0.100R .359 MAX † Blue band indicates rear release contact retention system ** Lanyard pulled taut against a .500 ± .13 dia. Mandrel All dimensions for reference only PIN CONTACTS ONL Y , SHELL SIZE 25 ONL Y BLUE BAND † ACCESS. DIA .359 MAX 1.0-6g0.100R .280 MIN

7.11 MIN

(See Lanyard Length Table)

2.499 MAX

63.47 MAX

(LONGER SHELL) Pin Contact Data for MIL-STD-1760 A B C D E F G H J K L M N P R S T U VWX Y Z A B C D E F G H J KL INSERT AVAILABILITY FAIL SAFE D38999/31 FOR MIL-STD-1760 25-20 Primary Interface Signal Set Contact Legend 8 (twinax) 10 (power) 12 (coax) 16 20 25-11 Auxiliary Power Signal Set *Part number reference. To complete, see how to order page 41. D38999/31 88-555875/76 91-555875/76 88-558518/19 91-558518/19 T3W-16B25-XXXX Type 6 Type 2 Type 1 D38999/31 for MIL-STD-1760 – Series III TV Breakaway Fail Safe – Crimp, Metal Lanyard Release Plug Tri-Start Lanyard Separation Forces Shell Size Straight Plug (lbs. max.)

15 Degree Pull

(lbs. max.) 25 90 100 Insert Arrangement Service Rating Total Con- tacts Contact 20 16 12 (Coax) 8 (Twinax) 25-20 N 30 10 13 4 3 Contacts for 25-20 Pattern Shell Size Arrg. Number Number of Contacts Size Contacts Service Rating Contact Location Standard Contacts Pin Socket 25 -20 3 8 Twinax A, H, K M39029/90-529 M39029/91-530 4 12 Coax 2,3 M39029/28-211 M39029/75-416 W, 5 M39029/102-558 M39029/103-559 13 16 N C, D, E, F , J, M, N, P , R, T, U, Y , Z M39029/58-364 M39029/56-352 10 20 N B, G, L, S, V, X, 1, 4, 6, 7 M39029/58-363 M39029/56-351 Insert Arrangement Service Rating Total Contacts Contact Size 20 10 (power) 25-11 N 11 2 9 *To order by Commercial Part numbers consult Amphenol.

41 2648283723 III501526500 PylePrinted Circuit Board EMI Filter TransientFiber OpticsOptions Others Matrix Pyle Crimp Rear Release Matrix Matrix 2 High Speed Contacts 38999 I II IIISJT Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com AmphenolAerospace HOW TO ORDER - BY MILITARY PART NUMBER FAIL SAFE D38999/31 Ordering procedure for example part number D38999/31WE20PN1 is shown below: DOD Number Prefix Spec Sheet Number Service Class Lanyard Length Code Insert Arrangement Contact Style Alternate Keying Position Type Number D38999/ 31 W E 20 P N 1 Easy Steps to build a part number... Military 1. Select a DOD Number Prefix 2. Specification Sheet Number Lanyard Length (in.) ±.236 Lanyard Length (mm.) ± 6.0 Lanyard Length Code for Part Number 6.024 153.0 E 6.535 166.0 F 7.008 178.0 G 7.520 191.0 H 7.992 203.0 I 8.504 216.0 J 9.016 229.0 K 9.528 242.0 L 7. Alternate Keying Position D38999/31 for MIL-STD-1760 – Series III TV Breakaway Fail Safe for Stores Management Applications- Lanyard Release Plug Designates F Electroless nickel plated aluminum, optimum EMI shielding effectiveness –65dB @ 10 GHz specification min., 48 hour salt spray, 200°C W Corrosion resistant olive drab cadmium plate aluminum, 500 hour extended salt spray, EMI –50dB @ 10 GHz specification min., 175°C Designates D38999/ MIL-DTL-38999, Series III Tri-Start Connectors Designates MIL-STD-1760 with pin contacts Designates P Replaces the “no designation” option in the PIN on revision C and earlier revision of the Mil-Spec. A Designates supplied less contacts. 6. Contact Style – P & A are Valid Options Designates N Is required for normal position. 3. Select a Service Class 4. Select a Lanyard Length Code 8. Type Number Type 1, 2 or 6. See drawings on page 40. For accessories for lanyard release plugs see page 90. 5. Select an Insert Arrangement Only 11 or 20 are available contact arrangement numbers. See page 40.

TransientFiber OpticsOptions Others Matrix 2 Matrix Pyle Crimp Rear Release Matrix I II III High Speed Contacts SJT Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com AmphenolAerospace D38999 Type Hybrid Breakaway – Series III Crimp, Metal Shell with Composite Operating Sleeve, And Lower Profile Lanyard Release Plug New Hybrid Lanyard Breakaway Fail Safe connec- tor with a composite thermoplastic outer operating sleeve for greater durability. This new hybrid breakaway is the breakaway of choice for the Navy F-18 program. Amphenol’s hybrid lanyard design offers greater durability over D38999 aluminum and composite designs because of its ability to handle abuse taken after weapons release. Other advantages include:

Lower profile compared to full metal breakaway Fail Safe connectors
Less weight This Hybrid Breakaway meets the applicable require- ments of MIL-DTL-38999/31 including random & sine vibration, ice resistance, fluid immersion and hydrolytic stability tests. (Test reports are available upon request). Currently the hybrid breakaway is available in shell sizes 25 and 17. It uses standard inserts available for breakaway plugs sizes 25 and 17, and is also available with inserts 25-20 and 25-11 for MIL-STD-1760. Consult Amphenol Aerospace for ordering of the new hybrid breakaway connectors. These hybrid connectors will accommodate the standard backshells for breakaway connectors shown on page 90. New Hybrid Lanyard Release Plugs (Metal inside shells and Composite, lower profile outer sleeves) Stores Management Type II, Rail Launch Plugs and receptacles that meet MIL-STD-1760 Amphenol provides a Breakaway Rail Launch connector that is designed for use on aircraft that carry rail launch missiles such as AMRAAM. These connectors are designed for blindmating of stores on rail launch applications. They consist of a buffer plug and a missile receptacle that meet the specifications of MIL-STD-1760 Stores Management. Other features and benefits include:
Designed to MIL-C-83538 specifications
Bayonet and push pull coupling
Use standard MIL-DTL-38999 crimp termination with power, coax and twinax contacts also available
Buffer provides flame barrier
Buffers are replaceable Consult Amphenol Aerospace for more information and ordering. Stores Management Type II Rail Launch Connectors

43 2648283723 III501526500 PylePrinted Circuit Board EMI Filter TransientFiber OpticsOptions Others Matrix Pyle Crimp Rear Release Matrix Matrix 2 High Speed Contacts 38999 I II IIISJT Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com AmphenolAerospace HD38999 High Density Connectors Introduction Front of Pin Insert Shown. Goes from 9 to 187 contacts! H 38999 High Density The HD38999 family of connectors was designed to work with existing mil-specified 38999 shells. To the end users familiar with standard 38999 connectors, this family of high density connectors will look, feel, and perform just like the mil-qualified connectors. Utilizing an existing mil-qualified 39029 size 23 contact and mil-qualified shells, the new system will be, in many cases, a drop-in connector. Even though the HD38999 has 30% more contacts, it still performs to minimum electrical requirements of standard 38999 connectors. For more information e-mail: hd38999info@amphenol-aao.com Specifications, descriptions and illustrations in this litera- ture are as accurate as known at the time of publication, but are subject to change without notice. 9-9 11-19 13-32 15-55 17-73 19-88 21-121 23-151 25-187 1 2 10 17 555347 1 2 8 15 2416 72 73 1 5 6 13 2214 33 43 44 55 56 66 67 78 79 89 90 99 100 108 109 116 117 121 1 4 5 1 1 2112 33 44 45 57 58 69 70 82 83 94 130 108 140 120 147 131 107 119 141 151148 4 11 2012 33 45 46 59 60 72 73 86 87 101 102 142 116 155 129 167 143 115 128 177 176 185 184 187 156 168 97 3

Sealed
Filtered A connector that has the connections... High Density Interconnects Shell Sizes (Front of Pin Insert Shown)
Aluminum
Composite
Stainless Steel

TransientFiber OpticsOptions Others Matrix 2 Matrix Pyle Crimp Rear Release Matrix I II III High Speed Contacts SJT Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com AmphenolAerospaceAmphenolAerospace 44 Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com HD38999 High Density Connectors How to Order CRIMP CONTACT SIZE WIRE BARREL RANGES/CURRENT CAPABILITY CRIMP BARREL DIAMETER CRIMP BARREL 24 AWG 3.0 AMPS 26 AWG 2.0 AMPS 28 AWG 1.5 AMPS Note: Wire insulation diameter greater than 0.045 inches is too large for the extraction tool to work properly. Connector damage is possible. Contact Part Numbers Crimp Tool - Daniels M22520/2-01 Size 23 Sockets 10-597330-735 Positioner - Daniels M22520/2-13 – Pins Size 23 Pins 10-597331-735 Daniels M22520/2-16 – Sockets Sealing Plugs 10-405996-222 (M27488-22-2) Insertion/Removal Tool - Glenair 809-088 Temperature Range: Insulation Resistance: Dielectric Withstanding Voltage: -65C to 175C 5000 megohms min.@ 500 VDC 25C 1000 VRMS @ Sea level Connector Type Shell Styles Service Class Shell Size – Insert arrangement Contact Type Alternate Positions PCB Options (P)TV 06 RW 23-151 P B (P25) Designates TV Tri-Start Series Connector TVP Back panel mounted receptacle (P) Potted version Designates

00 Wall mount receptacle

01 Line receptacle

06 Straight plug

07 Jam nut receptacle

RF Electroless nickel plated aluminum, optimum EMI shielding effectiveness -65dB @ 10GHz specification min., 48 hour salt spray, 175°C RW Corrosion resistant olive drab cadmium plate aluminum, 500 hour extended salt spray, EMI -50dB @ 10GHz specification min.,175°C RK Corrosion resistant stainless steel, plus 500 hour salt spray resistance, EMI –45 dB @ 10 GHz specification min., 175°C DT Durmalon plated, alternative to Cadmium. Corrosion resistant, 500 hour ex- tended salt spray, EMI -50dB @ 10GHz specification min. without CR ZN Zinc-Nickel Alternative to Cadmium corrosion resistant, 500 hour salt spray, Conductive, -65°C to +175°C Shell Size Insert Arrangement 9 – 9 11 – 19 13 – 32 15 – 55 17 – 73 Designates P Pin contacts S Socket contacts Easy Steps to build a part number... HD38999 Step 1. Select a Connector Type Step 2. Select a Shell Style Step 3. Select a Service Class Step 6. Select an Alternate Position A, B, C, D, E, blank for normal Step 4. Select a Shell Size – Insert Arrangement Step 5. Select a Contact Type Shell Size Insert Arrangement 19 – 88 21 – 121 23 – 151 25 – 187 Shell Sizes are MIL-DTL-38999, Series III, plus newer High Density insert arrangements A plug with a given rotation letter will mate with a receptacle with the same rotation letter. The angles for a given connector are the same whether it contains pins or sockets. Inserts are not rotated in conjunction with the master key/keyway. PLUG (front face shown) RECEPTACLE (front face shown) MAIN KEYWAY AP BSC BP BSC DP BSCCP BSC DR BSC˚ CR BSC BR BSC AR BSC MAIN KEYWAY Shell Size Key & keyway arrangement identification letter AR° or AP° BSC BR° or BP° BSC CR° or CP° BSC DR° or DP° BSC N* 105 140 215 265 A 102 132 248 320 B 80 118 230 312 C 35 140 205 275 D 64 155 234 304 E 91 131 197 240 11, 13, and N* 95 141 208 236 A 113 156 182 292 B 90 145 195 252 C 53 156 220 255 D 119 146 176 298 E 51 141 184 242 and N* 80 142 196 293 A 135 170 200 310 B 49 169 200 244 C 66 140 200 257 D 62 145 180 280 E 79 153 197 272 21, 23, and N* 80 142 196 293 A 135 170 200 310 B 49 169 200 244 C 66 140 200 257 D 62 145 180 280 E 79 153 197 272 Step 7. Select a PCB Contacts Pin Socket Designates P1 S1 PCB tail stickout .100” nominal +/-.040 inch P15 S15 PCB tail stickout .150” nominal +/-.040 inch P2 S2 PCB tail stickout .200” nominal +/-.040 inch P25 S25 PCB tail stickout .250” nominal +/-.040 inch

Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com AmphenolAerospace 3 2648283723 III501526500 PylePrinted Circuit Board EMI Filter TransientFiber OpticsOptions Others Matrix Pyle Crimp Rear Release Matrix Matrix 2 High Speed Contacts 38999 I II IIISJT Amphenol Aerospace New, Featured Products New/Featured Filter Connector with High Density Patterns Page 289 New High Density Patterns are available in Filter 38999 connec- tors in standard Mil-Spec or filter length shells. They provide 30% more contact that standard insert arrangement patterns. See page 43 for ordering information. Breakaway Hybrid, Low Proﬁle Lanyard Release Plug Page 42 New Hybrid Lanyard Breakaway Fail Safe Connector with a composite thermoplastic outer operating sleeve for greater durability. New HD38999 (High Density, Crimp) Plugs and receptacles Page 43, 44 The HD38999 family of connectors was designed to work with existing Mil-specified 38999 shells. The HD38999 has 30% more contacts, it still performs to minimum electrical requirements of standard 38999 connectors. MT Ferrule Connectors Page 359 Amphenol offers a multi-channel circular connector with high density MT fiber optics. High fiber density in a relatively small circular connector package with all the advantages of the MIL- DTL-38999 series III connector. ARINC 801 Connectors Page 356 Designed for use in Amphenol ARINC 801 fiber optic connectors - manufactured to comply with ARINC 801. Genderless terminus allows for use on both sides of a connector. Matrix MIL-DTL-5015 with RADSOK® Contacts Page 193 A special design of the Matrix MIL-DTL-5015, Series II connectors has added high amperage with the RADSOK ® contacts in the plug instead of standard rear release crimp contacts. Solution: Navy F-18 program needed a break away plug that would have greater durability in weapons release application. Solution: 30% more contact density in 38999 Series III Shells Solution: Higher amperage capability in Matrix MIL-DTL-5015 Solution: Higher contact density and custom stand-off shell designs Solution: Fiber Optic Termini & Connector that meet ARINC specifications Solution: Higher Density Fiber Optics in MIL-DTL-38999 Amphenol has become the leader in interconnection products through its long history of engineering expertise for product solution solving. New and innovative solutions are under development every day within our highly skilled engineering departments who are teamed with marketing product managers and production specialists. They are always striving to meet new customer requirements in ever changing markets. The teams have a customer-driven approach to produce the end result: quality interconnect products that meet or exceed customer demands. New/Featured New/Featured New/Featured New/Featured New/Featured

Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com AmphenolAerospace 89 2648283723 III501526500 PylePrinted Circuit Board EMI Filter TransientFiber OpticsOptions Others Matrix Pyle Crimp Rear Release Matrix Matrix 2 High Speed Contacts 38999 I II IIISJT MIL-DTL-38999 Series III TV Tri-Start

Backshells Accessories
Dummy Contacts
Wire Combs
Receptacle Protection Cap
Plug Protection Cap
Dummy Receptacle
Cable Clamps
Contacts-Printed Circuit Board Wire Wrap
Header Assembly Application Tools
Crimp Tools
Insertion Tools
Removal Tools MIL-DTL-38999 Series III, II, I, and SJT Accessories, Contacts, and Tools MIL-DTL-38999 Series I LJT
Receptacle Protection Cap
Plug Protection Cap
Dummy Receptacle
Cable Clamps
Contacts-Printed Circuit Board Wire Wrap
Header Assembly Application Tools
Crimp Tools
Insertion Tools
Removal Tools MIL-DTL-38999 Series II JT
Receptacle Protection Cap
Plug Protection Cap
Strain Relief (Solder/Crimp Type)
Contacts-Printed Circuit Board Wire Wrap
Header Assembly Application Tools
Crimp Tools
Insertion Tools
Removal Tools Amphenol Aerospace is the leader in Interconnect solutions and provides companies with a product portfolio of connectors, accessories, cable assemblies and system integration for most applications across various industries. With connectors conform- ing to Military, Aerospace and Industrial standards in US, Europe and Asia, Amphenol assumes the leadership in meeting the interconnect needs of these market segments. Series III TV Series II JT Series I LJT SJT SJT
Receptacle Protection Cap
Plug Protection Cap
Dummy Receptacle
Cable Clamps Application Tools
Crimp Tools
Insertion Tools
Removal Tools

TransientFiber OpticsOptions Others Matrix 2 Matrix Pyle Crimp Rear Release Matrix AmphenolAerospace I II III Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com High Speed Contacts SJT Amphenol offers a full range of accessories that are designed to enhance the performance of Amphenol Breakaway connectors. Low Profile Backshells in shell size 25 with the following features:

Olive drab cadmium finish
90 degree termination
Low profile design with three heights ranging from 1.010 to 1.660
Rear access covers to help ease harness assembly and repairability
Amphenol part numbers: 10-640000-XXX Backshells are offered for use with Breakaway Fail Safe Connectors in three heights. Dummy Contacts
Available in size 12 and size 8
Provide a cost effective alternative for sealing unused contact cavities
Size 8 part number: T3-4008-59P
Size 12 part number: T3-4012-59P Wire Combs
Available for the 25-20 insert pattern to help to stabilize and prevent contact side loading
Amphenol part number: 21-33626-XXX For information on how to order these accessory products for Breakaway Fail Safe connectors consult Amphenol Aerospace. Accessory products for Breakaway Connectors: Dummy Contacts and Wire Combs 38999, Series III TV Breakaway Fail Safe Backshells, Dummy Contacts, Wire Combs Series III TV

Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com AmphenolAerospace 91 2648283723 III501526500 PylePrinted Circuit Board EMI Filter TransientFiber OpticsOptions Others Matrix Pyle Crimp Rear Release Matrix Matrix 2 High Speed Contacts 38999 I II IIISJT Series III TV B A .578 MAX

14.68 MAX

B A .167 +.010 –.005 4.24 +.25 –.13

6.000 APPROX

152.40 APPROX

.797 MAX

20.24 MAX

B A .797 MAX D *10-553310-XXX *10-552943-XXX *10-553970-XXX

3.500 APPROX

88.90 APPROX

*10-553120-XXX Millimeters Inches Consult Amphenol Aerospace for availability of stainless steel protection caps. * To complete order number, add shell size and suffix number. For example, shell size 11 with olive drab cadmium nickel base, 10-552943-119 All dimensions for reference only. For MS protection caps, see page 95. MIL-DTL-38999, Series III TV Receptacle Protection Cap Shell Size A Thread Class 2B 0.1P-0.3L-TS B Dia. Max. D Dia. +.010 –.000 9 .6250 .875 .703 11 .7500 1.000 .844 13 .8750 1.125 1.016 15 1.0000 1.250 1.141 17 1.1875 1.438 1.266 19 1.2500 1.500 1.391 21 1.3750 1.625 1.516 23 1.5000 1.750 1.641 25 1.6250 1.875 1.766 Shell Size MS Shell Size Code B Dia. Max. D Dia. +.25 –.00 9 A 22.23 17.86 11 B 25.40 21.44 13 C 28.58 25.81 15 D 31.75 28.98 17 E 36.53 32.16 19 F 38.10 35.33 21 G 41.28 38.51 23 H 44.45 41.68 25 J 47.63 44.86 Finish 10-No Suffix Olive Drab, Cadmium, Nickel base -XX9 Electroless Nickel -XXG

5.000 APPROX

127.00 APPROX

N B

1.166 MAX

29.62 MAX

N B D *10-552944-XXX *10-553998-XXX * To complete order number, add shell size and suffix number. For example, shell size 11 with olive drab cadmium nickel base, 10-552944-119 Inches All dimensions for reference only. For MS protection caps, see page 95. Consult Amphenol Aerospace for availability of stainless steel protection caps. MIL-DTL-38999, Series III TV Plug Protection Cap Shell Size A Thread Class 2B 0.1P-0.3L-TS D Dia. +.010 –.000 N Dia. Max. 9 .6250 .516 .895 11 .7500 .641 1.000 13 .8750 .766 1.171 15 1.0000 .891 1.299 17 1.1875 1.016 1.436 19 1.2500 1.141 1.543 21 1.3750 1.266 1.670 23 1.5000 1.343 1.787 25 1.6250 1.516 1.914 Shell Size MS Shell Size Code D Dia. +.25 –.00 N Dia. Max. 9 A 13.11 22.73 11 B 16.28 25.40 13 C 19.46 29.74 15 D 22.63 32.99 17 E 25.81 36.47 19 F 28.98 39.19 21 G 32.16 42.42 23 H 34.11 45.39 25 J 38.51 48.62 Finish 10-No Suffix Olive Drab, Cadmium, Nickel base -XX9 Electroless Nickel -XXG Millimeters Series III TV

Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com AmphenolAerospace 93 2648283723 III501526500 PylePrinted Circuit Board EMI Filter TransientFiber OpticsOptions Others Matrix Pyle Crimp Rear Release Matrix Matrix 2 High Speed Contacts 38999 I II IIISJT Series III TV Millimeters Inches * To complete order number, add shell size and suffix number. For example, shell size 11 with olive drab cadmium nickel base, 10-553974-119 M M .005 .13 T S M W All dimensions for reference only Designates true position dimensioning Part number reference. See note below to complete. * 10-553974-XXX Shell Size MS Shell Size Coded B Thread 0.1P-0.3L-TS (Plated) M +.020 –.000 R1 R2 S ±.010 T ±.008 –.006 W ±.010 TT ±.008 –.006 Shell Size MS Shell Size Coded M +.51 –.00 R1 R2 S ±.25 T +.20 –.15 W ±.25 TT +.20 –.15 Finish 10-No Sufﬁx Olive Drab, Cadmium, Nickel base -XX9 Electroless Nickel -XXG MIL-DTL-38999, Series III TV Dummy Receptacle MIL-DTL-38999, Series III TV Plug Protection Cap

TransientFiber OpticsOptions Others Matrix 2 Matrix Pyle Crimp Rear Release Matrix AmphenolAerospace I II III Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com High Speed Contacts SJT * To complete order number, see suffix chart below. Examples: Clamp with metal coupling nut for shell size 11 with olive drab cadmium nickel base, 10-552681-119. Millimeters Inches All dimensions for reference only. FF L KK V THREAD .270 +.010 –.020 6.86 +.25 –.51 .270 +.010 –.020 6.86 +.25 –.51 V THREAD KK FF LL U VIEW AT A A Straight Style *10-552681-XXX metal coupling

90 Degree Elbow Style

*10-552682-XXX metal coupling Shell Size MS Shell Size Code F1 Min. Dia. Cable F2 Max. Dia. Cable L Max. U Max. FF Dia. Max. KK Dia. Max. LL Max. Shell Size MS Shell Size Code F1 Min. Dia. Cable F2 Max. Dia. Cable L Max. U Max. V Thread Metric FF Dia. Max. KK Dia. Max. LL Max. Finish 10-No Suffix Olive Drab, Cadmium Nickel Base -XX9 Electroless Nickel -XXG MIL-DTL-38999, Series III TV Cable Clamps Series III TV

Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com AmphenolAerospace 95 2648283723 III501526500 PylePrinted Circuit Board EMI Filter TransientFiber OpticsOptions Others Matrix Pyle Crimp Rear Release Matrix Matrix 2 High Speed Contacts 38999 I II IIISJT Series III TV STANDARD 500 CYCLE CONTACTS FOR TV AND CTV, P & S

1500 CYCLE CONTACTS FOR CTV, CLASSES H & J

PLASTIC PROTECTION CAPS MS METAL PROTECTION CAPS SEALING PLUGS Above part numbers include standard 500 cycle finish designation - gold plating over suitable underplate in accordance with SAE AS39029. For other finish variations, consult Amphenol. * For use with RG180B/U and RG195A/U cable. For other size 8 coax or optional sizes 12 and 16 coax contacts available for use in MIL-DTL-38999 Series III connectors, see the High Speed Contact section of this catalog consult Amphenol, Sidney, NY * To complete order number, replace X with applicable letter as follows: R - designates eyelet type N - designates washer type MS metal protection caps are supplied with service class W which designates corrosion resistant olive drab cadmium plate aluminum. Consult Amphenol, Sidney, NY for more detailed information on ordering MS Metal protection caps. ** For use with M17/M176-00002 cable. For other contact options available for use in Tri-Start connectors, (wire wrap, thermocouple, fiber optic) consult Amphenol. MIL-DTL-38999, Series III TV Contacts, Sealing Plugs, Protective Caps Shell Size MS Shell Size Code MS Plug Protection Cap MS Receptacle Protection Cap

9 A D38999/32W9X* D38999/33W9X*

11 B D38999/32W11X* D38999/33W11X*

13 C D38999/32W13X* D38999/33W13X*

15 D D38999/32W15X* D38999/33W15X*

17 E D38999/32W17X* D38999/33W17X*

19 F D38999/32W19X* D38999/33W19X*

21 G D38999/32W21X* D38999/33W21X*

23 H D38999/32W23X* D38999/33W23X*

25 J D38999/32W25X* D38999/33W25X*

11 10-70506-16 10-70500-12 13 10-70500-18 10-70500-14 15 10-70500-20 10-70500-16 17 10-70500-22 10-70500-19 19 10-70500-24 10-70500-20 21 10-70524-1 10-70500-22 23 10-70506-28 10-70500-24 25 10-70500-28 10-70524-1 Contact Size Commercial No. Military No. 8 (Coax) 10-482099-8 N/A 8 (Twinax) T3-4008-59P N/A 8 (Power) 10-405996-83 MS27488-8-3 10 (Power) T3-4010-59P M85049/81-10 12 10-405996-122 MS27488-12-2 16 10-405996-162 MS27488-16-2 20 10-405996-202 MS27488-20-2 22D 10-405996-222 MS27488-22-2 4 10-405996-43 MS27488-4-3 0 10-405996-03 MS27488-0-3 Contact Size CTV Pins CTV Sockets Commercial No. Military No. Supersedes Commercial No. Military No. Supersedes 12 10-597072-2X M39029/107-623 – 10-597073-2X M39029/106-617 – 16 10-597068-2X M39029/107-622 – 10-597069-2X M39029/106-616 – 20 10-597064-2X M39029/107-621 – 10-597065-2X M39029/106-615 – 22D 10-597058-3X M39029/107-620 – 10-597061-2X M39029/106-614 – Contact Size TV/CTV Pins TV/CTV Sockets Military No. Supersedes Military No. Supersedes 8 (Coax)* M39029/60-367 MS27536 M39029/59-366 MS27535 8 (Power) Contact Factory NA NA NA 8 (Twinax)** M39029/90-529 N/A M39029/91-530 N/A 10 (Power) M39029/58-528 N/A M39029/56-527 N/A 22D M39029/58-360 MS27493-22D M39029/56-348 MS27490-22D

Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com AmphenolAerospace 106 38999 TransientFiber OpticsOptions Others Matrix 2 Matrix Pyle Crimp Rear Release Matrix I II III High Speed Contacts SJT Mounts to all MIL-DTL-38999 and *MIL-DTL-26482 Connectors Termination of PC tail connectors to a flex print or a printed circuit board represents a major cost in the manufacturing process for users. When adding flex or printed circuit board assemblies to an expensive filter or filter/transient protection connec- tor, the total cost of a failed solder joint, a bent pin, or an unanticipated electrical failure becomes prohibitive. The universal header assembly from Amphenol provides for easy separation of the connector from the board on these occasions. The header assembly is comprised of a short pin/socket contact. The tail end of the contact is soldered to the through hole of the flex or printed circuit board. The socket is embedded in the insulator, making electrical contact with the printed circuit tail of the connector. Header Assemblies Provide Cost Savings Incorporation of the header assembly provides the user with time and cost saving potentials. These header assemblies can be vapor phase or wave soldered to flex or printed circuit boards prior to the receipt of the EMI/EMP connector. Headers can be installed to standard connectors, allowing for electrical testing that would adversely affect the sensitive diodes, MOV’s or capacitors in the EMI/EMP connectors. Expensive connector assemblies can be easily removed from and reattached to the header assembly as the manufacturing process dictates. Mounting Applications Shell modifications are recommended, but are not necessary. The header assembly can be attached to connectors with standard flange placement or directly to the circuit board. The ideal application would involve either a single flange moved all the way to the rear of the connector or a double flange. Cinch nuts can be installed in either flange to allow easier mounting to the panel or the header assembly. The forward flange would mount the connector to the panel; the rear flange would be used to mount the header assembly. Various types of captivated or loose attaching screws can be utilized for unique applications. Amphenol universal headers are slotted to allow mounting to all series of MIL-DTL-38999 or MIL-DTL-26482* connectors without special alterations. They are of similar dimension as the flange of the mounting connector and are approximately .185 inches (4.70 mm) thick. * For information on Header Assemblies for MIL-DTL-26482 connector consult Amphenol, Sidney NY . Cylindrical Configuration

3 PCB stickout dimensions are available.
Size 22 contacts use .175 thick headers
Size 16 to 20 contacts use .195 thick headers
Consult Amphenol, Sidney NY for additional configurations.
Headers for cylindrical connectors accom- modate up to 128 pins. For MIL-DTL-38999 insert arrangements chart see pages 4-7 and insert drawings on pages 8-14. Mounting to Rectangular ARINC Connectors
Headers for ARINC connector arrangements accommodate up to 150 pins
Consult Amphenol, Sidney, NY for ARINC configurations and detailed dimensions. Materials
Body is molded or machined from FR-4.
Electrical engagement areas of the header contact are plated with .00003 inches minimum of gold over .00005 inches minimum of nickel. See drawing of standard header on next page. Headers provide easy separation of the connector from the PC board. MIL-DTL-38999, Series III TV, II JT, I LJT Universal “Header Assembly” for Flex Print or PC Board Series III TV Series II JT Series I LJT

Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com AmphenolAerospace 107 2648283723 III501526500 PylePrinted Circuit Board EMI Filter TransientFiber OpticsOptions Others Matrix Pyle Crimp Rear Release Matrix Matrix 2 High Speed Contacts 38999 I II IIISJT S T TT VISUAL INDICATOR NOTCH FOR TOP C OF INSERT PATTERN (SIZE & CONFIGURATION OPTIONAL) L F RADIUS B PCB STICKOUT (SEE SUFFIX CHART BELOW) G .020 ± .001 .040 ± .001 (SIZE 20) .0625 ± .0010 (SIZE 16) B PCB STICKOUT (SEE SUFFIX CHART BELOW).050 G SIZE 22 CONTACT VIEW SIZE 16 AND 20 CONTACT VIEW NOTE: Size 22 accepts .018 to .022 dia. PCB tails. Size 16 accepts .048 to .064 dia. PCB tails. Size 20 accepts .037 to .043 dia. PCB tails. The drawing below shows the standard header assembly for use with MIL-DTL-38999 connectors. Consult Amphenol Aerospace, Sidney NY for drawings of headers for ARINC configurations. Assemblies containing Size 22 contacts only: .175 Assemblies containing Size16 or 20 contacts: .195 See Suffix Chart † TP designates true position dimensioning. ASSEMBLY NUMBER SUFFIX CHARTHOW TO ORDER INFORMATION For Header Assembly with MIL-DTL-38999 Connectors Use coded number as follows: Designates Amphenol Header Assembly Shell size designation for MIL-DTL-38999 Series I, II, III and IV see Suffix chart. Arrangement number - See MIL-STD-1560 or MIL-STD-1669. See insert availability charts on pages 4-7. Contact PCB Stickout designation See Suffix chart. For how to order information on adapters to be used with ARINC connectors, consult Amphenol, Sidney NY . * Shell size designation for MIL-DTL-38999 Series I, II, III and IV and MIL-DTL-26482 Series 1 and 2. Examples: Shell size 9 use 08. Shell size 25 use 24. Size 22 contacts available in all 3 stickout lengths. Size 16 and 20 contacts available only in .185 and .270 lengths. * Insert arrangement 14-97 and 15-97 are not available at this time. Consult Amphenol, Sidney NY for information. MIL-DTL-38999, Series III TV, II JT, I LJT Universal “Header Assembly” for Flex Print or PC Board Connectors Assembly Part Number Shell Size F Ra- dius G ± .005 S ± .005 T + .008 – .006 TP† TP† TT + .008 – .006 Shell Size Designation* Arrangement Number Suffix* Contact PCB Stickout Suffix B ± .015 Stickout

08 Insert Arrangement

1 .120 10 2 .185 12 3 .270 Series III TV Series II JT Series I LJT 21-9040 XX - XX X

108 Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com 38999 TransientFiber OpticsOptions Others Matrix 2 Matrix Pyle Crimp Rear Release Matrix I II III High Speed Contacts SJT Where 2 or 3 tools are listed for a contact size, only one tool and its die or positioner are required to crimp the contact. The above crimping tools and positioners are available from the approved tool manufacturer. The following data includes information pertaining to the appli- cation tools which have been established for crimping, inserting, and removing contacts incorporated in the TV, CTV and MIL- DTL-38999 Series III connectors. For additional information on coax, twinax and triax contact tools see High Speed Contact section of this catalog. All crimping tools included are the “full cycling” type and when used as specified in the installation instructions (L-624 and L-844) covering the TV, CTV and MS series connectors, will pro vide reliable crimped wire to contact terminations. There is a possibility of additional crimping tools other than those included being available at present or in the future for this specific appli cation. CRIMPING TOOLS INSERTION TOOLS REMOVAL TOOLS The M81969/8, 11-8674, 11-8675, and 11-8794 metal contact insertion and removal tools will accommodate wires having the maximum outside specified, the plastic tools must be used. † To be determined. †† Contact Daniels Manufacturing Co. for availability. * Double end insertion/removal tool. ** Twinax insertion tools are available only in a straight type, metal version. MIL-DTL-38999, Series I LJT, II JT, III TV , & SJT Application Tools Contact Size/Type Crimping Tool Turret Die or Positioner

12 Pin and Socket M22520/1-01 M22520/1-04

16 Pin and Socket M22520/1-01

20 Pin and Socket M22520/1-01

22, 22D, 22M Pin M22520/2-01 M22520/7-01 M22520/2-09 M22520/7-07 22, 22D, 22M Socket Series I, III M22520/2-01 M22520/7-01 M22520/2-07 M22520/7-05 22D Socket Series II M22520/2-01 M22520/7-01 M22520/2-06 M22520/7-06

8 Twinax Center Pin and

8 Twinax Intermediate

Outer Pin & Socket M22520/5-01 M22520/5-200 Contact Size/Type Crimping Tool Turret Die or Positioner

8 Coaxial Inner

8 Coaxial Outer Pin

16 Coaxial Inner

16 Coaxial Outer

12 Coaxial Inner

12 Coaxial Outer

10 (Power) TP-201423 Use with Contact Size Plastic Tools Metal Tools MS Part Number Color Angle Type Straight Type Commercial Part No. ColorMS Part No. Commercial Part No. 10 (Power M81969/14-05* Gray / (White) M81969/8-11 † † Green

12 M81969/14-04* Y ellow / (White) M81969/8-09 11-8674-12 11-8794-12 Y ellow

16 M81969/14-03* Blue / (White) M81969/8-07 11-8674-16 11-8794-16 Blue

20 M81969/14-10* Red / (Orange) M81969/8-05 11-8674-20 11-8794-20 Red

22 M81969/14-09 Brown/White M81969/8-03 11-8674-22 11-8794-22 Brown

22D, 22M M81969/14-01* Green / (White) M81969/8-01 11-8674-24 11-8794-24 Black

8 Coaxial None Required

8 Twinax None M81969/46-06** None Red

Commercial Part No. Angle Type Straight Type Commercial Part No. ColorMS Part No. Commercial Part No. 10 (Power) M81969/14-05* (Gray) / White † M81969/8-12 † † Green / White

12 M81969/14-04* (Y ellow) / White 11-10050-11 M81969/8-10 11-8675-12 11-8795-12 Y ellow / White

16 M81969/14-03* (Blue) / White 11-10050-10 M81969/8-08 11-8675-16 11-8795-16 Blue / White

20 M81969/14-10* (Orange) / Red 11-10050-9 M81969/8-06 11-8675-20 11-8795-20 Red / Orange

22 M81969/14-09* (Brown)/White 11-10050-8 M81969/8-04 11-8675-22 11-8795-22 Brown/White

22D, 22M M81969/14-01* (Green) / White 11-10050-7 M81969/8-02 11-8675-24 11-8795-24 Green / White

8 Coaxial M81969/14-12 Green None None 11-9170 DRK264-8†† N/A

8 Twinax M81969/14-12 Green None M81969/46-12** 11-9170 N/A N/A

Series III TV Series II JT Series I LJT SJT

Click to View Pricing, Inventory, Delivery & Lifecycle Information: Amphenol: D38999/20FA98SB D38999/20JJ8PB D38999/20WB98SC D38999/24KE26SA D38999/26ME99PN TV06RW1519S TV07RW2537P TVP00RGW176SNLC TVP00RW25F4SB TVP02RW935P TVPS02RF176S TVS06RF1535SN CTVS06RF236PB D38999/20KD19PC D38999/20WE26PB D38999/26FD19BN D38999/26WD15PC TVS01RF2517PN 10-552944-179 D38999/20MD35SN-LC D38999/20MD5SN D38999/20MD97PN D38999/20MD97SN D38999/20ME26PN D38999/20ME26SN D38999/20ME26SN-LC D38999/20ME2AN D38999/20ME35PB D38999/20ME35PN D38999/20ME35PN-LC D38999/20ME35SA D38999/20ME35SB D38999/20ME35SN D38999/20ME35SN-LC D38999/20ME6AA D38999/20ME6AN D38999/20ME6PB D38999/20ME6PN D38999/20ME6PN-LC D38999/20ME6SA D38999/20ME6SN-LC D38999/20ME8PE D38999/20ME8PN D38999/20MF11PN-LC D38999/20MF32PN D38999/20MF32PN-LC D38999/20MF35BA D38999/20MF35BN D38999/20MF35PB D38999/20MF35PN D38999/20MF35SB-LC D38999/20MF35SN D38999/20MG11SN D38999/20MG16BN D38999/20MG35PA D38999/20MG35PA-LC D38999/20MG35PN D38999/20MG35PN-LC D38999/20MG35SN D38999/20MG35SN-LC D38999/20MG39SN D38999/20MG41JN D38999/20MG41PN D38999/20MG75AN D38999/20MH35PA D38999/20MH35PB D38999/20MH35PN D38999/20MH35SN D38999/20MH35SN-LC D38999/20MJ19BN D38999/20MJ19PN D38999/20MJ20AN D38999/20MJ20BN D38999/20MJ20PA D38999/20MJ20PN D38999/20MJ20SN D38999/20MJ20SN-LC D38999/20MJ24BN D38999/20MJ24PN D38999/20MJ24PN-LC D38999/20MJ24SA D38999/20MJ24SN D38999/20MJ24SN-LC D38999/20MJ29PN D38999/20MJ29SA D38999/20MJ29SN D38999/20MJ35AA D38999/20MJ35AB D38999/20MJ35AN D38999/20MJ35BA D38999/20MJ35BN D38999/20MJ35HA D38999/20MJ35PA D38999/20MJ35PB D38999/20MJ35PC D38999/20MJ35PN D38999/20MJ35SA D38999/20MJ35SA-LC D38999/20MJ35SB D38999/20MJ35SB-LC

Product Information

D38999-24WF35SN specifications and overview.

Summary

MIL-DTL-38999, Series I LJT, II JT, III TV Insert Availability and Identification Chart

Description

MIL-DTL-38999, Series I LJT, II JT, III TV Insert Availability and Identification Chart

Source title D38999-24WF35SN Datasheet(PDF) - Amphenol Corporation

Related Parts

More parts from the same family.

Browse manufacturer