STD36NH02L STMICROELECTRONICS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 13

Technical content

Datasheet sections

  • 1 Electrical ratings
  • 2 Electrical characteristics
  • 2.1 Electrical characteristics (curves)
  • 3 Test circuit
  • 4 Package mechanical data
  • 5 Packaging mechanical data
  • 6 Revision history

N-channel 24V - 0.011Ω - 30A - DPAK STripFET™ III Power MOSFET General features ■ RDS(on) * Qg industry’s benchmark ■ Conduction losses reduced ■ Switching losses reduced

Description

This series of products utilizes the last advanced design rules of ST’s proprietary STripFET™ technology. This is suitable for the most demanding DC-DC converter application where high efficiency is to be achieved.

Applications

■ Switching application Internal schematic diagram Type V DSS RDS(on) ID STD36NH02L 24V <0.0145 Ω 30A (1) 1. Guaranteed when external Rg=4.7 Ω and tf < tfmax TO-252 Order codes Part number Marking Package Packaging STD36NH02L D36NH02L DPAK Tape & reel

1 Electrical ratings

Table 1. Absolute maximum ratings

  1. Guaranteed when external Rg=4.7 Ω and tf < tfmax
  2. Value limited by wire bonding
  3. Pulse width limited by safe operating area.
  4. Starting Tj=25°C, I D=19A, VDD=18V

Table 2. Thermal resistance

2 Electrical characteristics

Table 3. On/off states Table 4. Dynamic

  1. Pulsed: pulse duration=300µs, duty cycle 1.5%
  2. Q oss = Coss*∆ VIN, Coss = Cgd+Cds

Table 5. Switching times Table 6. Source drain diode

  1. Pulse width limited by safe operating area
  2. Pulsed: pulse duration=300µs, duty cycle 1.5%

2.1 Electrical characteristics (curves)

Figure 1. Safe operating area Figure 2. Thermal impedance Figure 3. Output characterisics Figure 4. Transfer characteristics Figure 5. Transconductance Figure 6. Static drain-source on resistance

3 Test circuit

Figure 13. Switching times test circuit for Figure 14. Gate charge test circuit Figure 15. Test circuit for inductive load Figure 16. Unclamped inductive load test Figure 17. Unclamped inductive waveform Figure 18. Switching time waveform

4 Package mechanical data

In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: : www.st.com

DIM. mm. inch A 2.2 2.4 0.086 0.094 A1 0.9 1.1 0.035 0.043 A2 0.03 0.23 0.001 0.009 B 0.64 0.9 0.025 0.035 b4 5.2 5.4 0.204 0.212 C 0.45 0.6 0.017 0.023 C2 0.48 0.6 0.019 0.023 D 6 6.2 0.236 0.244 D1 5.1 0.200 E 6.4 6.6 0.252 0.260 E1 4.7 0.185 e 2.28 0.090 e1 4.4 4.6 0.173 0.181 H 9.35 10.1 0.368 0.397 L 1 0.039 (L1) 2.8 0.110 L2 0.8 0.031 L4 0.6 1 0.023 0.039 R 0.2 0.008 V2 0° 8° 0° 8° DPAK MECHANICAL DATA 0068772-F

STD36NH02L Packaging mechanical data

5 Packaging mechanical data

DIM. mm inch MIN. MAX. MIN. MAX. A 330 12.992 B 1.5 0.059 C 12.8 13.2 0.504 0.520 D 20.2 0.795 G 16.4 18.4 0.645 0.724 N 50 1.968 T 22.4 0.881 BASE QTY BULK QTY 2500 2500 REEL MECHANICAL DATA DIM. mm inch MIN. MAX. MIN. MAX. A0 6.8 7 0.267 0.275 B0 10.4 10.6 0.409 0.417 B1 12.1 0.476 D 1.5 1.6 0.059 0.063 D1 1.5 0.059 E 1.65 1.85 0.065 0.073 F 7.4 7.6 0.291 0.299 K0 2.55 2.75 0.100 0.108 P0 3.9 4.1 0.153 0.161 P1 7.9 8.1 0.311 0.319 P2 1.9 2.1 0.075 0.082 R 40 1.574 W 15.7 16.3 0.618 0.641 TAPE MECHANICAL DATA All dimensions are in millimeters

6 Revision history

Table 7. Revision history