D3372-6302-AR 3M | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Electronic Solutions Division Interconnect Solutions http://www.3Mconnectors.com 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ Four-Wall Header .100” × .100” Latch/Ejector, Straight and Right Angle D3000 Series

  • Military (with 3M’s 3518 & N3518 polarizing key) and centerbump polarization
  • Optional ejector latches
  • Mounting holes for securing header to board
  • Optional polarizing posts available
  • High temperature insulator suitable for “no lead” soldering operations
  • High temperature insulator in through-hole version suitable for “paste in hole” reflow soldering
  • RoHS Compliant. See the Regulatory Information Appendix (RIA) in the “RoHS compliance” section of www.3Mconnectors.com for compliance information (RIA E1 and C1 apply) Date Modified: May 21, 2012 TS-2245-F Sheet 1 of 4 Physical Insulator: Material: High Temp Glass Filled Polyester (PCT) Flammability: UL 94V-0 Color: Black (PCT) Contact: Material: Brass Plating: Underplating: 50 -150 μ” [ 1.25 μm ] Ni Wiping Area: 15 μ” [0.381 μm] Gold Solder Tails: 40 - 120 μ” [ 1-3 μm ] Matte Tin Marking: 3M Logo, Part Identification Number and Orientation Triangle Electrical Current Rating: 5.00 A, 1 Contact Powered

3.00 A, 6 Contacts Powered

1.75 A, All Contacts Powered

Rating Conditions: EIA-364-070 Method 2, 30°C maximum temperature rise, 20% derated. Reference appropriate 3M Product Specification for detailed current derating curves. Insulation Resistance: >1 × 109 Ω at 500 VDC Withstanding Voltage: 1,000 VRMS at Sea Level Environmental Temperature Rating: -55°C to +105°C Process Rating: 260°C, profile per J-STD-020C, single pass Moisture Sensitivity Level: 1 (per J-STD-020C) UL File No.: E68080

Electronic Solutions Division Interconnect Solutions http://www.3Mconnectors.com 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ Four-Wall Header .100” × .100” Latch/Ejector, Straight and Right Angle D3000 Series TS-2245-F Sheet 2 of 4 -X2XX Header with Short Ejector/Latch for 3M Sockets without Strain Relief -X0XX Header without Latch Ejector .025 ± .002 Sq Typ [ 0.64 ] Position 1 Orientation Triangle .21 [5.3] .24 [6.1] .30 [7.6] F Typ .049 Ref [1.24] .100 Ref [2.54] 2X ø .100 [2.54] (See Note 2) A C .16 [4.1] Notch C (See Table 1 & Note 1) Notch B (See Table 1) Notch A (See Table 1 & Note1) B B Section B-B (Right Angle) .68 [17.3] .35 [8.9] .020 [0.51] A A F Typ Section A-A (Straight) Dim. E .30 [7.6] .24 [6.1] .025 ± .002 Sq Typ [ 0.64 ] CL “Y”CL .197 [5.00] .20 [5.1] .424 ± .010 [ 10.77 ] .573 ± .010 [ 14.55 ] .08 [2.0] .97 Ref [24.6] .08 [2.0] .37 Ref [9.4] .46 Ref [11.7]

1.07 Ref

[27.2] Dim. E “Y” .12 [3.0] -X3XX Header with Long Ejector/Latch for 3M Sockets with Strain Relief .100 2.54 REF. B .25 6.4 .34 8.6 .28 7.1 D .100 2.54 REF. POSITION #1 .020 0.51 .13 3.3 2X O .100 [2.54] SEE NOTE #2

Electronic Solutions Division Interconnect Solutions http://www.3Mconnectors.com 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ Four-Wall Header .100” × .100” Latch/Ejector, Straight and Right Angle D3000 Series TS-2245-F Sheet 3 of 4 Table 1 Pin Qty 3M Part Number Dimensions Polarizing NotchesA B C D * Available without center notch B. Contact 3M. Inch (mm) ± .005± .1 ± .01 Tolerance Unless Noted .0 .00 .000 [ ] Dimensions for Reference only Table 2 3M Part Number Suffix Contact Tail Dim E Pin Cross Section Dimension G Dim F Diagonals Corner Radii -5XX2 Solder Tail for .062 [1.57] Thick PC Board .112 ± .010 [2.84] .0245 ± .0005 [0.622] .028 ± ..001 [0.71] .0075 Ref [0.191] Ø.035 ±.003 [0.89] (See Note 3)-6XX2 Notes: 1. Notches A & C will accomodate 3M Polarizing Keys (3M Part #3518 or #N3518). 2. Mounting hardware: From solder side of pc board use #4-24 thread cutting screw (3M Part # 3341-5) and .116 [2.95] dia mounting hole. For right angle version only, #2-56 bolt and nut (3M Part # 3341-6) with .106 [2.69] dia mounting hole may be used. See illustrations on page 4. 3. Contact your 3M sales representative for custom requirements. CL"Y" .41 [10.4] Max to Edge of PCB for Daisy Chain ø.106 [2.69] or ø.116 [2.95] (See Note 2) .029 [0.74] .100 ± .003 [2.54] Position 1 .232 [5.89] C Recommended Mounting Hole Pattern (Right Angle) .100 ± .003 [2.54] Dim G ø.106 [2.69] or ø.116 [2.95] (See Note 2) Position 1 .100 ± .003 [2.54] .100 ± .003 [2.54] .060 [1.52] .300 [7.62] Side to Side Stackability B Recommended Mounting Hole Pattern (Straight) .352 [8.94] CL“Y” Dim G

Ordering Information

5 = Right Angle Solder Tails 6 = Straight Solder Tails 3M Part Number (See Table 1) Latch/Ejector System 0 = No Latch/Ejector installed 2 = Short Roll Pin Latch/Ejectors 3 = Long Roll Pin Latch/Ejectors Tail 02 = for .062 [1.57] thick board

Electronic Solutions Division Interconnect Solutions http://www.3Mconnectors.com 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ Four-Wall Header .100” × .100” Latch/Ejector, Straight and Right Angle D3000 Series TS-2245-F Sheet 4 of 4 .321 [8.15] .100 Dia [2.54] Polarizing Post Note: Insert Post into one mounting hardware hole on bottom of header. Set post to protrude .115” [2.92] 3 201 -4 L C P B la c k Polarizing Keys .15 [3.8] .09 [2.3] A Breakaway Tab .34 Ref [8.6] Note: #2216 B/A Scotchweld can be used to adhere keys. Dim A N3518 LCP Black .02 3518 PBT Gray .02 Mounting Hardware .31 [7.9] .50 [12.7] Panhead Thread Cutting Screw: #4-24 X 5/16”□ Type: USA Std BT, Federal BG Hex Head Bolt, Nut and Washer Bolt - #2-56 X 1/2”□ 3341-5 (Installed from bottom of board) 3341-6 (Must be inserted prior to latch on vertical headers) 3341-5 & 6 Material - Stainless Steel Polarizing Keys N3518 LCP Black .02 Part Customization This spec sheet details our standard offering. 3M has several capabilities that can provide a part tailored to your specific needs. Ask your 3M sales representative or customer service for more details.

  • The -2 & -3 roll pin latches (may be ordered separately with roll pins included)
  • Snap-in style latch/ejectors in either short (N3XXXX5XXX) or long (N3XXX-X6XX) styles, may also be ordered separately, and are functional and dimensional equivalents to the -2 and -3 roll pin latches. If ordering latches separately, please use the below chart Short Latch Long Latch Latch Style Color High Temperature (PPA) N3505-30B N3505-31B Snap In Black High Temperature (PCT) N3505-2B N3505-3B Roll Pin Black
  • Selective pin removal (ATA or other compatability) , Accessories

All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. Please recycle. Printed in USA. © 3M 2012. All rights reserved. RIA-2217B-E 3M Electronics Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 U.S.A. 1-800-225-5373 www.3Mconnectors.com 3M is a trademark of 3M Company.