D3262

D3206_V01 TEC | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 3

Technical content

02-2015, Rev. 0215 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ sec- tion, application notes and all specifications are subject to change. AXICOM Signal Relays n Slim line 15x7.3mm (.590x.287”) n 2 form C bifurcated contacts (2 CO), switching current 2A n High sensitivity for low power consumption, 80mW/140mW n High dielectric characteristic, up to 2100Vrms between open contact n High surge capability (1.2/50μs and 10/700μs) meets Telcordia GR 1089 and FCC Part 68, up to 2900V between open contacts, up to 6000V between coil and contacts n High mechanical shock, up to 1500g survival n Hermetically sealed (RT V) Typical applications Communications equipment, linecard application - analog, ISDN, xDSL, PABX, voice over IP , office and business equipment, measurement and control equipment, consumer electronics, set top boxes, HiFi, medical equipment Approvals UL 508 File No. E 111441 Technical data of approved types on request Contact Data Contact arrangement 2 form C (CO) Max. switching voltage 220VDC, 250VAC Rated current 2A Limiting continuous current 2A Switching power 60W, 62.5VA Contact material PdRu, Au covered Contact style bifurcated contacts Min. recommended contact load 100µV/1µA Initial contact resistance <70mΩ Thermoelectric potential <10µV Operate time typ. 3ms, max. 4ms Release time without diode in parallel typ. 1ms, max. 3ms with diode in parallel typ. 3ms, max. 4ms Set/reset time min. 20ms Bounce time max. typ. 1ms, max. 5ms Electrical endurance at contact application 0 (≤ 30mV / ≤ 10mA) min. 2.5x106 operations cable load open end min. 2.0x106 operations resistive, 24V / 1.25A - 30W min. 5x105 operations resistive, 30VDC / 2A - 60W min. 5x105 operations resistive, 125VDC / 0.24A - 30W min. 5x105 operations UL contact rating 30VDC, 2A, 60W 125VDC, 0.5A, 62,5W 120VDC, 1.25A, 150W Mechanical endurance 100x106 operations Coil Data Magnetic system polarized, monostable, bistable Coil voltage range 3 to 48VDC Max. coil temperature 125°C. Thermal resistance <165K/W Coil versions, monostable Coil Rated Operate Limiting Release Coil Rated coil code voltage voltage voltage voltage resistance power VDC VDC VDC VDC Ω±10% mW Standard version, monostable, 1 coil 06 3 2.10 6.30 0.30 64 140 07 4 2.80 8.40 0.40 114 140 04 4.5 3.15 9.40 0.45 145 140 09 5 3.50 10.50 0.50 178 140 05 6 4.20 12.60 0.60 257 140 10 9 6.30 18.90 0.90 574 140 02 12 8.40 25.20 1.20 1028 140 12 24 16.80 42.20 2.40 2880 200 13 48 33.60 68.90 4.80 7680 300 High sensitive version, monostable, 1 coil 21 3 2.10 8.30 0.30 113 80 22 4.5 3.15 11.10 0.45 253 80 23 5 3.50 12.50 0.50 313 80 24 6 4.20 13.90 0.60 450 80 25 9 6.30 16.70 0.90 1013 80 26 12 8.40 33.40 1.20 1800 80 27 24 16.80 50.40 2.40 4114 140 28 48 36.00 70.00 4.80 8882 260 High dielectric version, monostable, 1 coil 91 3 2.25 6.3 0.30 45 200 92 4.5 3.15 9.45 0.45 101 200 96 12 8.40 25.2 1.20 720 200 All figures are given for coil without pre-energization, at ambient temperature +23°C. FX2 Relay DC current [A] DC voltage [VDC] Max. DC load breaking capacity 108-98003 Rev. G All specifications subject to change. Consult Tyco Electronics for latest specifications. 5 of 11 Telecom-, Signal and RF Relays FX2 Relay AXICOM Coil Operating Range Unom = Nominal coil voltage Umax. = Upper limit of the operative range of the coil voltage (limiting voltage) Uop. min. = Lower limit of the operative range of the coil voltage (reliable operate voltage) For latching relays Uset min. resp. Ureset min. Urel. min. = Lower limit of the operative range of the coil voltage (reliable release voltage) 0.2 0.4 0.6 0.8 1.2 1.4 1.6 1.8 2.2 2.4 2.6 2.8 3.2 3.4 -60 -50 -40- 30 -20 -100 10 20 30 40 50 60 70 80 90 100 110 120 Umax. at 0 A Umax. at 2 x 2 A Umax. at 2 x 1 A Unom. nominal coil voltage Uop. min. Urel. min. Ambient Temperature [°C] Coil Voltage [U/Unom] 80 mW 140 mW 200 mW 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 -60- 50 -40- 30 -20- 10 01 02 03 04 05 06 07 08 09 0 100 110 120 Umax. at 0 A Umax. at 2 x 2 A Umax. at 2 x 1 A Uop. min. Urel. min. Ambient Temperature [°C] Coil Voltage [U/Unom] Unom. nominal coil voltage 260 mW 300 mW 0.2 0.4 0.6 0.8 1.2 1.4 1.6 1.8 2.2 2.4 2.6 2.8 3.2 3.4 3.6 3.8 4.2 4.4 -60- 50 -40- 30 -20- 10 01 02 03 04 05 06 07 08 09 01 00 1101 20 1301 40 Umax. - 5 % coil duty at 2 x 2 A Umax. - 100 % coil duty at 0 A Uset min. Ambient Temperature [°C] Coil Voltage [U/Unom] 100 mW Latching Unom. nominal coil voltage Umax. - 5 % coil duty at 0 A Umax. - 5 % coil duty at 2 x 1 A Z

02-2015, Rev. 0215 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ sec- tion, application notes and all specifications are subject to change. AXICOM Signal Relays FX2 Relay (Continued) Insulation standard high dielectric Initial dielectric strength between open contacts 1800Vrms 2100V rms between contact and coil 1800Vrms 4000V rms between adjacent contacts 1800Vrms 2100V rms Initial surge withstand voltage between open contacts 2500V 2900V between contact and coil 3500V 6000V between adjacent contacts 2500V 2900V Initial insulation resistance between insulated elements >109Ω >10 9Ω Capacitance between open contacts max. 4pF between contact and coil max. 2pF between adjacent contacts max. 2pF Cross talk at 100MHz/900MHz -34.0dB/-15.1dB Insertion loss at 100MHz/900MHz 0.03dB/0.60dB Voltage standing wave ratio (VSWR) at 100MHz/900MHz 1.07/1.45 Other Data Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content refer to the Product Compliance Support Center at www.te.com/customersupport/rohssupportcenter Ambient temperature -40°C to +85°C Category of environmental protection IEC 61810 RT V - immersion cleanable Degree of protection, IEC 60529 IP 67, immersion cleanable Vibration resistance (functional) 20g, 10 to 500Hz Shock resistance (functional), half sinus 11ms 50g Shock resistance (destructive), half sinus 0.5ms 1500g Weight max. 2.5g Resistance to soldering heat THT Peek value IEC 60068-2-20 265°C/10s Ultrasonic cleaning not recommended Packaging/unit tube/50 pcs., box/1000 pcs. Coil Data (continued) Coil versions, bistable 1 coil Coil Rated Set Limiting Reset Coil Rated coil code voltage voltage voltage voltage resistance power VDC VDC VDC VDC Ω±10% mW Standard, bistable 1 coil 41 3 2.25 7.50 -2.25 90 100 42 4.5 3.38 11.20 -3.38 203 100 43 5 3.75 12.40 -3.75 250 100 44 6 4.50 14.90 -4.50 360 100 45 9 6.75 22.40 -6.75 810 100 46 12 9.00 29.80 -9.00 1440 100 47 24 18.00 48.70 -18.00 3840 150 High dielectric version, bistable 1 coil 62 4.5 3.15 11.20 -3.15 203 100 All figures are given for coil without pre-energization, at ambient temperature +23°C. Other coil voltages on request. Umax upper limit of the operative range of the coil voltage (limiting voltage) when coils are continuously energized Uop min lower limit of the operative range of the coil voltage (reliable operate voltage) Urel min lower limit of the operative range of the coil voltage (reliable release voltage) 108-98003 Rev. G All specifications subject to change. Consult Tyco Electronics for latest specifications. 5 of 11 Telecom-, Signal and RF Relays FX2 Relay AXICOM Coil Operating Range Unom = Nominal coil voltage Umax. = Upper limit of the operative range of the coil voltage (limiting voltage) Uop. min. = Lower limit of the operative range of the coil voltage (reliable operate voltage) For latching relays Uset min. resp. Ureset min. Urel. min. = Lower limit of the operative range of the coil voltage (reliable release voltage) 0.2 0.4 0.6 0.8 1.2 1.4 1.6 1.8 2.2 2.4 2.6 2.8 3.2 3.4 -60 -50 -40- 30 -20 -100 10 20 30 40 50 60 70 80 90 100 110 120 Umax. at 0 A Umax. at 2 x 2 A Umax. at 2 x 1 A Unom. nominal coil voltage Uop. min. Urel. min. Ambient Temperature [°C] Coil Voltage [U/Unom] 80 mW 140 mW 200 mW 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 -60- 50 -40- 30 -20- 10 01 02 03 04 05 06 07 08 09 0 100 110 120 Umax. at 0 A Umax. at 2 x 2 A Umax. at 2 x 1 A Uop. min. Urel. min. Ambient Temperature [°C] Coil Voltage [U/Unom] Unom. nominal coil voltage 260 mW 300 mW 0.2 0.4 0.6 0.8 1.2 1.4 1.6 1.8 2.2 2.4 2.6 2.8 3.2 3.4 3.6 3.8 4.2 4.4 -60- 50 -40- 30 -20- 10 01 02 03 04 05 06 07 08 09 01 00 1101 20 1301 40 Umax. - 5 % coil duty at 2 x 2 A Umax. - 100 % coil duty at 0 A Uset min. Ambient Temperature [°C] Coil Voltage [U/Unom] 100 mW Latching Unom. nominal coil voltage Umax. - 5 % coil duty at 0 A Umax. - 5 % coil duty at 2 x 1 A 108-98003 Rev. G All specifications subject to change. Consult Tyco Electronics for latest specifications. 5 of 11 Telecom-, Signal and RF Relays FX2 Relay AXICOM Coil Operating Range Unom = Nominal coil voltage Umax. = Upper limit of the operative range of the coil voltage (limiting voltage) Uop. min. = Lower limit of the operative range of the coil voltage (reliable operate voltage) For latching relays Uset min. resp. Ureset min. Urel. min. = Lower limit of the operative range of the coil voltage (reliable release voltage) 0.2 0.4 0.6 0.8 1.2 1.4 1.6 1.8 2.2 2.4 2.6 2.8 3.2 3.4 -60 -50 -40- 30 -20 -100 10 20 30 40 50 60 70 80 90 100 110 120 Umax. at 0 A Umax. at 2 x 2 A Umax. at 2 x 1 A Unom. nominal coil voltage Uop. min. Urel. min. Ambient Temperature [°C] Coil Voltage [U/Unom] 80 mW 140 mW 200 mW 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 -60- 50 -40- 30 -20- 10 01 02 03 04 05 06 07 08 09 0 100 110 120 Umax. at 0 A Umax. at 2 x 2 A Umax. at 2 x 1 A Uop. min. Urel. min. Ambient Temperature [°C] Coil Voltage [U/Unom] Unom. nominal coil voltage 260 mW 300 mW 0.2 0.4 0.6 0.8 1.2 1.4 1.6 1.8 2.2 2.4 2.6 2.8 3.2 3.4 3.6 3.8 4.2 4.4 -60- 50 -40- 30 -20- 10 01 02 03 04 05 06 07 08 09 01 00 1101 20 1301 40 Umax. - 5 % coil duty at 2 x 2 A Umax. - 100 % coil duty at 0 A Uset min. Ambient Temperature [°C] Coil Voltage [U/Unom] 100 mW Latching Unom. nominal coil voltage Umax. - 5 % coil duty at 0 A Umax. - 5 % coil duty at 2 x 1 A PCB layout TOP view on component side of PCB Terminal assignment TOP view on component side of PCB Monostable Bistable, 1 coil Contacts are shown in reset condition. Both coils can be used as either set or reset coils. Contact position might change during transportation and must be reset before use.

02-2015, Rev. 0215 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ sec- tion, application notes and all specifications are subject to change. AXICOM Signal Relays FX2 Relay (Continued) Dimensions 0.5 5.08±0.15 3.3±0.3 10.7±0.05 0.3±0.05 Packing Product code structure Typical product code D32 04 Type D32 Signal Relays FX2 2 form C, 2 CO Coil Coil code: please refer to coil versions table Performance and coil type 0x,1x Standard version, monostable 2x High sensitive version, monostable 4x Standard version bistable 9x High dielectric version, monostable 6x High dielectric version, bistable Product code Arrangement Perf. type Coil type Coil Part number D3206 2 form C (2 CO) Standard Monostable 3VDC 1462034-6 D3207 4VDC 1462034-8 D3204 4.5VDC 1462034-2 D3209 5VDC 1462034-9 D3205 6VDC 1462034-5 D3210 9VDC 1-1462034-3 D3202 12VDC 1462034-1 D3212 24VDC 1-1462034-4 D3213 48VDC 1-1462034-5 D3221 2 form C (2 CO) High sensitive Monostable 3VDC 1-1462034-9 D3222 4.5VDC 2-1462034-0 D3223 5VDC 2-1462034-1 D3225 9VDC 2-1462034-3 D3226 12VDC 2-1462034-4 D3227 24VDC 2-1462034-5 D3228 48VDC 2-1462034-6 D3241 2 form C (2 CO) Standard Bistable 3VDC 2-1462034-8 D3242 4.5VDC 2-1462034-9 D3243 5VDC 3-1462034-0 D3246 12VDC 3-1462034-3 D3247 24VDC 3-1462034-4 D3291 2 form C (2 CO) High dielectric Monostable 3VDC 6-1462034-6 D3292 4.5VDC 6-1462034-8 D3296 12VDC 6-1462034-7 D3262 2 form C (2 CO) High dielectric Bistable 4.5VDC 6-1462034-3 This list represents the most common types and does not show all variants covered by this data sheet. Other types on request