D2W SENSATA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 4

Technical content

Features

  • SIP SSR
  • Ratings to 3.5 A @ 280 VAC
  • DC Control
  • Zero-Crossing (Resistive Loads) Output
  • Internal Snubber Network Control Voltage 2A 3A 3.5A 3-32 VDC D2W202F D2W203F D2W203F-11 Description 2A 3A 3.5A Output Voltage (47-63Hz) [Vrms] 24-280 24-280 24-280 Transient Overvoltage [Vpk] 600 600 600 Maximum Off-State Leakage Current @ Rated Voltage [mA] 8 8 8 Minimum Off-State dv/dt @ Maximum Rated Voltage V/µsec 200 200 200 Maximum Load Current [Arms] 2 3 3.5 Minimum Load Current [Arms] 0.06 0.06 0.06 Maximum Surge Current (16.6ms) [Apk] 28 70 80 Maximum On-State Voltage Drop @ Rated Current [Vpk] 1.4 1.4 1.4 Minimum Power Factor (with Maximum Load) 0.5 0.5 0.5 PRODUCT SELECTION

www.sensata.comCopyright © 2020 Sensata Technologies, Inc. Input (1) General Description Parameters Control Voltage Range 3.5-32 VDC Must Turn On Voltage 3.0 VDC Must Turn On Voltage 1.0 VDC Typical Input Current @ 5 VDC 3.0 mA Nominal Input Impedance 1500 Ohm Maximum Turn-On Time [msec] ½ Cycle Maximum Turn-Off Time [msec] ½ Cycle Description Parameters Dielectric Strength, Input/Output/Base (50/60Hz) (2) 4000 Vrms Minimum Insulation Resistance (@500 VDC) (2) 109 Ohm Maximum Capacitance, Input/Output 10 pF Ambient Operating Temperature Range -30 to 80°C Ambient Storage Temperature Range -30 to 125°C Weight (typical) 0.6 oz. (17g) Encapsulation Thermally Conductive Epoxy DIMENSIONS Tolerance, unless otherwise noted: ±0.02 in / 0.5 mm All dimensions are in inches [millimeters] PIN 1: AC LOAD PIN 2: AC LOAD PIN 3: +DC CONTROL PIN 4: -DC CONTROL 0.100 TYP . (2.5)

www.sensata.comCopyright © 2020 Sensata Technologies, Inc. THERMAL DERATE INFORMATION GENERAL NOTES (1) (2) Dielectric and insulation resistance are measured between input and output (3) Off-State dv/dt test method per EIA/NARM standard RS AGENCY APPROVALS & CERTIFICATIONS E116950 WARNINGS RISK OF MATERIAL DAMAGE AND HOT ENCLOSURE

  • The product’s side panels may be hot, allow the product to cool before touching
  • Follow proper mounting instructions including torque values
  • Do not allow liquids or foreign objects to enter this product Failure to follow these instructions can result in serious injury, or equipment damage. HAZARD OF ELECTRIC SHOCK, EXPLOSION OR ARC FLASH
  • Disconnect all power before installing or working with this equipment
  • Verify all connections and replace all covers before turning on power Failure to follow these instructions will result in death or serious injury.

+1 (877) 502 5500 – Option 2 sales.crydom@sensata.com Europe, Middle East & Africa +44 (1202) 416170 ssr-info.eu@sensata.com sales.isasia@list.sensata.com China +86 (21) 2306 1500 Japan +81 (45) 277 7117 Korea +82 (31) 601 2004 India +91 (80) 67920890 Rest of Asia +886 (2) 27602006 ext 2808 Rev: 08/20/20 ECN 20961 FDE-07-01 Rev. B www.sensata.com CONTACT US Copyright © 2020 Sensata Technologies, Inc. Sensata Technologies, Inc. (“Sensata”) data sheets are solely intended to assist designers (“Buyers”) who are developing systems that incorporate Sensata products (also referred to herein as “components”). Buyer understands and agrees that Buyer remains responsible for using its independent analysis, evaluation and judgment in designing Buyer’s systems and products. Sensata data sheets have been created using standard laboratory conditions and engineering practices. Sensata has not conducted any testing other than that icular data sheet. Sensata may make corrections, enhancements, improvements and other changes to its data sheets or components without notice. Buyers are authorized to use Sensata data sheets with the Sensa R, NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE TO ANY OTHER SENSATA INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY THIRD PARTY TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT, IS GRANTED HEREIN. SENSATA DATA SHEETS ARE PROVIDED “AS IS”. SENSATA MAKES NO WARRANTIES OR REPRESENTATIONS WITH REGARD TO THE DATA SHEETS OR USE OF THE DATA SHEETS, EXPRESS, IMPLIED OR STATUTORY, INCLUDING ACCURACY OR COMPLETENESS. SENSATA DISCLAIMS ANY WARRANTY OF TITLE AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT, QUIET POSSESSION, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHTS WITH REGARD TO SENSATA DATA SHEETS OR USE THEREOF. All products are sold subject to Sensata’s terms and conditions of sale supplied at www.sensata.com SENSATA ASSUMES NO LIABILITY FOR APPLICATIONS ASSISTANCE OR THE DESIGN OF BUYERS’ PRODUCTS. BUYER ACKNOWLEDGES AND AGREES THAT IT IS SOLELY RESPONSIBLE FOR COMPLIANCE WITH ALL LEGAL, REGULATORY AND SAFETY-RELATED REQUIREMENTS CONCERNING ITS PRODUCTS, AND ANY USE OF SENSATA COMPONENTS IN ITS APPLICATIONS, NOTWITHSTANDING ANY APPLICATIONS-RELATED INFORMATION OR SUPPORT THAT MAY BE PROVIDED BY SENSATA. Mailing Address: Sensata Technologies, Inc., 529 Pleasant Street, Attleboro, MA 02703, USA.