D2MV OMRON | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

D M V D2MV Miniature Basic Switch Highly reliable Miniature Basic Switch in spite of its Ultra-low Load action

  • Twin crossbar contact employed for exceptionally high contact reliability.
  • Unique internal mechanism that ensures high contact reliability even in micro load operations. Applicable for detection of light objects. RoHS Compliant Model Number Legend List of Models Contact Form Ratings 1A 0.1A Actuator Max. Operating Force (OF) Pin plunger

0.10 N {10 gf} D2MV-1-1C1 D2MV-01-1C1

0.25 N {25 gf} D2MV-1-1C2 D2MV-01-1C2

0.49 N {50 gf} D2MV-1-1C3 D2MV-01-1C3

lever 0.49 N {50 gf} D2MV-1L11-1C3 D2MV-01L11-1C3 Hinge lever 0.29 N {30 gf} D2MV-1L-1C3 D2MV-01L-1C3 Long hinge lever 0.15 N {15 gf} D2MV-1L111-1C3 D2MV-01L111-1C3 Simulated roller lever 0.29 N {30 gf} D2MV-1L13-1C3 D2MV-01L13-1C3 Short hinge roller lever 0.49 N {50 gf} D2MV-1L22-1C3 D2MV-01L22-1C3 Hinge roller lever 0.29 N {30 gf} D2MV-1L2-1C3 D2MV-01L2-1C3 1. Ratings 1: 125 VAC 1A 01: 30 VDC 0.1A 2. Actuator None : Pin plunger L11 : Short hinge lever L : Hinge lever L111 : Long Hinge Lever L13 : Simulated roller lever L22 : Short hinge roller Lever L2 : Hinge roller Lever 1 2 3 45 3. Contact form 1: SPDT 4. Terminals C: Solder terminals 5. Maximum Operating Force (OF) 1: 0.10 N {10 gf} (for pin plunger models only) 2: 0.25 N {25 gf} (for pin plunger models only) 3: 0.49 N {50 gf} Note. These values are for the pin plunger models.

  • SPDT COM NC NO Separator (Sold Separately), Actuator (Sold Separately), Terminal Connector (Sold Separately) Refer to "Basic Switch Common Accessories"

D2MV Miniature Basic Switch D M V Contact Specifications * Please refer to "●Using Micro Loads" in "Precautions" for more information on the minimum applicable load. Terminals/Appearances (Unit:mm) Mounting Holes (Unit: mm) Item Model D2MV-1 models D2MV-01 models Contact Specification Needle Twin crossbar Material Silver Gold alloy Gap (standard value) 0.5 mm Inrush current NC NO Minimum applicable load (reference value) * 5 VDC 30mA 5 VDC 1mA Characteristics Note. The data given above are initial values. *1. The values for dielectric strength shown are for models with a Separator (refer to " Micro Switch Common Accessories"). *2. The values are at Free Position and Total Travel Position values for pin plunger, and Total Travel Position value for lever. Close or open circuit of the contact is 1ms max. Item Model D2MV-1 models D2MV-01 models Permissible operating speed 1 mm to 1 m/s (for pin plunger models) Permissible operating frequency Mechanical 300 operations/min (for pin plunger models) Electrical 60 operations/min Insulation resistance 100M Ω min. (at 500 VDC with insulation tester) Contact resistance (initial value) 30 m Ω max. 50 m Ω max. Dielectric strength * 1 Between terminals of the same polarity 1,000 VAC 50/60 Hz 1min Between current-carrying metal parts and ground 1,500 VAC 50/60 Hz 1min Between each terminal and non-current-carrying metal parts 1,500 VAC 50/60 Hz 1min Vibration resistance * 2 Malfunction 10 to 55 Hz, 1.5 mm double amplitude Shock resistance Durability Models with OF of 0.10N 150 m/s 2 {approx. 15G} max. Models with OF between 0.25 to 0.49N 400 m/s 2 {approx. 40G} max. Malfunction * 2 100 m/s 2 {approx. 10G} max. Durability * 3 Mechanical 10,000,000 operations min. (60 operations/min) Electrical 500,000 operations min. (30 operations/min) 1,000,000 operations min. (30 operations/min) Degree of protection IEC IP40 Ambient operating temperature −25°C to +80°C (at ambient humidity of 60% max.) (with no icing or condensation) Ambient operating humidity 85% max. (for +5°C to +35°C) Weight Approx. 6g (pin plunger models) Ratings Note. The above rating values apply under the following test conditions. (1) Ambient temperature: 20±2°C (2) Ambient humidity: 65±5% (3) Operating frequency: 30 operations/min Approved Safety Standard UL (UL1054) /CSA (CSA C22.2 No.55) Model D2MV-1 models D2MV-01 models Rated voltage Item Resistive load 125 VAC 1A 0.1A 30 VDC 1A 0.1A Rated voltage Model D2MV-1 D2MV-01 125 VAC 1A 0.1A 30 VDC 1A 0.1A 2.4 dia.1 . 3 dia. 1.2 3.2 6.3 (6.3) (6.5) 3.9 7.5 4.75±0.1 10.3±0.1 2-3.1 dia. mounting holes or M3 screw hole 22.2±0.1

D2MV Miniature Basic Switch D M V Dimensions (Unit: mm) /Operating Characteristics Note 1. Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions. Note 2. The operating characteristics are for operation in the A direction ( ). PT OP 2.8 2.8 11.6 4.2 15.9 (7.5)2.8 31.8 3+0.07 −0.05 3+0.07 dia. holes−0.05 3.2+0.15 dia.−0.07 22.2±0.1 20.2±0.25 19.8±0.8 39.3±0.8 10.3±0.1 t=0.5 3-Solder/Terminal A 2.8 10.3

  • Pin plunger Models D2MV-1-1C@ D2MV-01-1C@ Operating characteristics Model D2MV-1-1C1 D2MV-01-1C1 D2MV-1-1C2 D2MV-01-1C2 D2MV-1-1C3 D2MV-01-1C3 Operating Force OF Max. Releasing Force RF Min. 0.10N {10 gf} 0.005N {0.5 gf} 0.25N {25 gf} 0.01N {1 gf} 0.49N {50 gf} 0.02N {2 gf} Pretravel PT Max. Overtravel OT Min. Movement Differential MD Max. 1.2 mm 1.3 mm 0.25 mm Operating Position OP 14.7±0.4 mm Note. The @ in the model number is for the OF code. PT OP 2.8 8.1 t=0.5 * * Stainless-steel lever 11.6 15.9 (7.5)2.8 31.8 3+0.07 −0.05 3+0.07 dia. holes−0.05 3.2+0.15 dia.−0.07 22.2±0.1 22.1 19.8±0.8 39.3±0.8 10.3±0.1 t=0.5 3-Solder/Terminal A 4.3 2.8 10.3
  • Short Hinge Lever Models D2MV-1L11-1C3 D2MV-01L11-1C3 Note. The indicated reference values of RF are for cases where the lever weight is not applied to the plunger. Operating characteristics Model D2MV-1L11-1C3 D2MV-01L11-1C3 Operating Force OF Max. Releasing Force RF Min. 0.49N {50 gf} 0.04N {4 gf} (reference value) Pretravel PT Max. Overtravel OT Min. Movement Differential MD Max. 1.7 mm 1.0 mm 0.4 mm Operating Position OP 15.2±0.5 mm PT OP 2.8 8.1t=0.5 * * Stainless-steel lever 11.6 15.9 (7.5)2.8 31.8 3+0.07 −0.05 3+0.07 dia. holes−0.05 3.2+0.15 dia.−0.07 22.2±0.1 35.6±0.8 19.8±0.8 39.3±0.8 10.3±0.1 t=0.5 3-Solder/Terminal A 4.3 2.8 10.3
  • Hinge Lever Models D2MV-1L-1C3 D2MV-01L-1C3 Note. The indicated reference values of RF are for cases where the lever weight is not applied to the plunger. Operating characteristics Model D2MV-1L-1C3 D2MV-01L-1C3 Operating Force OF Max. Releasing Force RF Min. 0.29N {30 gf} 0.02N {2 gf} (reference value) Pretravel PT Max. Overtravel OT Min. Movement Differential MD Max. 3.3 mm 2.1 mm 0.7 mm Operating Position OP 15.2±1.2 mm
  • Long Hinge Lever Models D2MV-1L111-1C3 D2MV-01L111-1C3 Note. The indicated reference values of RF are for cases where the lever weight is not applied to the plunger. Operating characteristics Model D2MV-1L111-1C3 D2MV-01L111-1C3 Operating Force OF Max. Releasing Force RF Min. 0.15N {15 gf} 0.01N {1 gf} (reference value) Pretravel PT Max. Overtravel OT Min. Movement Differential MD Max. 6.0 mm 4.0 mm 1.4 mm Operating Position OP 15.2±2.6 mm PT OP 2.8 8.1 * Stainless-steel lever 11.6 15.9 (7.5)2.8 31.8 3+0.07 −0.05 3+0.07 dia. holes−0.05 3.2+0.15 dia.−0.07 22.2±0.1 59.4±0.8 19.8±0.8 39.3±0.8 10.3±0.1 A 4.3 2.8 10.3 t=0.5 * t=0.5 3-Solder/Terminal PT OP 2.8 8.1 * Stainless-steel lever 11.6 15.9 (7.5)2.8 31.8 3+0.07 −0.05 3+0.07 dia. holes−0.05 3.2+0.15 dia.−0.07 22.2±0.1 32.6±0.8 19.8±0.8 39.3±0.8 10.3±0.1 A 4.3 2.8 10.3 t=0.5 * R3.5 t=0.5 3-Solder/Terminal
  • Simulated Roller Lever Models D2MV-1L13-1C3 D2MV-01L13-1C3 Note. The indicated reference values of RF are for cases where the lever weight is not applied to the plunger. Operating characteristics Model D2MV-1L13-1C3 D2MV-01L13-1C3 Operating Force OF Max. Releasing Force RF Min. 0.29N {30 gf} 0.02N {2 gf} (reference value) Pretravel PT Max. Overtravel OT Min. Movement Differential MD Max. 3.3 mm 1.9 mm 0.7 mm Operating Position OP 18.7±1.2 mm

D2MV Miniature Basic Switch D M V Note 1. Unless otherwise specified, a tolerance of ±0.4mm applies to all dimensions. Note 2. The operating characteristics are for operation in the A direction ( ). Precautions ★Please refer to "Basic Switches Common Precautions" for correct use.

  • Handling Do not apply excessive shock. Doing so may cause damage to the Switch's internal components because they designed for a small load.
  • Soldering  Terminal connections Complete the soldering at the iron tip temperature between 250 to 350°C (60W) within 5 seconds, and do not apply any external force for 1 minute after soldering. Apply minimum amount of flux required. It may result in contact failure once the flux penetrates into the internal part of the Switch.
  • Mounting Use M3 mounting screw with plane washers or spring washers to securely mount the Switch. Tighten the screws to a torque of 0.39 to 0.59 N·m {4 to 6 kgf·cm}.
  • Mounting Direction For a Switch with an actuator, mount the Switch in a direction where the actuator weight will not be applied to the Switch. Since the Switch is designed for a low operating force, its release force is low. Therefore, release failure may occur if unnecessary force is applied to the Switch.
  • Using Micro Loads Using a model for ordinary loads to open or close the contact of a micro load circuit may result in faulty contact. Use models that operate in the following range. However, even when using micro load models within the following operating range, if inrush current occurs when the contact is opened or closed, it may increase the contact wear and so decrease durability. Therefore, insert a contact protection circuit where necessary. The minimum applicable load is the N-level reference value. This value indicates the malfunction reference level for the reliability level of 60% (λ 60). (JIS C5003) The equation, λ60=0.5×10-6/ operations indicates that the estimated malfunction rate is less than operations with a reliability level of 60%. PT OP 2.8 8.1 * 1. Stainless-steel lever * 2. Polyacetal resin roller 11.6 15.9 (7.5)2.8 31.8 3+0.07 −0.05 3+0.07 dia. holes−0.05 3.2+0.15 dia.−0.07 22.2±0.1 20.1 4.8 dia.×4.8 *2 19.8±0.8 39.3±0.8 10.3±0.1 A 5.1 10.3 t=0.5 *1 t=0.5 3-Solder/Terminal
  • Short Hinge Roller Lever Models D2MV-1L22-1C3 D2MV-01L22-1C3 Note. The indicated reference values of RF are for cases where the lever weight is not applied to the plunger. Operating characteristics Model D2MV-1L22-1C3 D2MV-01L22-1C3 Operating Force OF Max. Releasing Force RF Min. 0.49N {50 gf} 0.04N {4 gf} (reference value) Pretravel PT Max. Overtravel OT Min. Movement Differential MD Max. 1.7 mm 1.0 mm 0.4 mm Operating Position OP 20.7±0.6 mm PT OP 2.8 8.1 * 1. Stainless-steel lever * 2. Polyacetal resin roller 11.6 15.9 (7.5)2.8 31.8 3+0.07 −0.05 3.2+0.15 dia.−0.07 22.2±0.1 34.8±0.8 4.8 dia.×4.8 *2 19.8±0.8 39.3±0.8 10.3±0.1 A 5.1 10.3 t=0.5 *1 3+0.07 dia. holes−0.05 t=0.5 3-Solder/Terminal
  • Hinge Roller Lever Models D2MV-1L2-1C3 D2MV-01L2-1C3 Note. The indicated reference values of RF are for cases where the lever weight is not applied to the plunger. Operating characteristics Model D2MV-1L2-1C3 D2MV-01L2-1C3 Operating Force OF Max. Releasing Force RF Min. 0.29N {30 gf} 0.02N {2 gf} (reference value) Pretravel PT Max. Overtravel OT Min. Movement Differential MD Max. 3.3 mm 2.1 mm 0.7 mm Operating Position OP 20.7±1.2 mm Cautions Correct Use 2,000,000 Voltage (V) 1 10 100 1,000 Current (mA) 0.1 1 mA Normal load type Operating range D2MV-1 Micro load type Operating range D2MV-01 5 mA0.16 mA 30 mA 100 mA

D2MV Miniature Basic Switch D M V  Application examples provided in this document are for reference only. In actual applications, confirm equipment functions and safety before using the product.  Consult your OMRON representative before using the product under conditions which are not described in the manual or applying the product to nuclear control systems, railroad systems, aviation systems, vehicles, combustion systems, medical equipment, amusement machines, safety equipment, and other systems or equipment that may have a serious influence on live s and property if used improperly. M ake sure th at the r atings and perform ance ch aracteristics of the prod uct provide a m argin of safety for the system or equipment, and be sure to provide the system or equipment with double safety mechanisms. OMRON Corporation ELECTRONIC AND MECHANICAL COMPONENTS COMPANY Contact: www.omron.com/ecb Cat. No. B018-E1-09 0812(0207)(O) Note: Do not use this document to operate the Unit.