S1 CRYDOM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
- Crydom's signature family of solid-state relays. Ratings from 10A to 125A @ 12-280 VAC
- SCR output for heavy industrial loads
- AC or DC control
- Zero-crossin g (resistive loads) or random-fire (inductive loads) output PRODUCT SELECTION Control Voltage 10A 25A 50A 75A 90A 110A 125A 3-32 VDC D2410 D2425 D2450 D2475 D2490 D21110 D24125 90-280 VAC A2410 A2425 A2450 A2475 A2490 A24110 A24125 18-36 VAC A2410E A2425E A2450E A2475E A2490E A24110E A24125E AVAILABLE OPTIONS OUTPUT SPECIFICATIONS (1)
Description
Operating Voltage (47-63Hz) [Vrms] 24-280 24-280 24-280 24-280 24-280 24-280 24-280 Transient Overvoltage [Vpk] 600 600 600 600 600 600 600 Maximum Off-State Leakage Current @ Rated Voltage [mArms] 10 10 10 10 10 10 10 Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] (2) 500 500 500 500 500 500 500 Maximum Load Current (3) [Arms] 10 25 50 75 90 110 125 Minimum Load Current [mArms] 40 40 40 40 40 150 150 Maximum Surge Current (16.6ms) [Apk] 120 250 625 1000 1200 1500 1750 Maximum I2 t for Fusing (8.3 msec) [A2 sec] 60 260 1620 4150 6000 9340 12700 For Contact information visit our web site. www.crydom.com ©2008 Crydom, Inc. Specifications subject to change without notice.
INPUT SPECIFICATIONS (1) Description ( D PREFIX) ( A PREFIX) ( E SUFFIX) Control Voltage Range 3-32 VDC 90-280 Vrms 18-36 Vrms Maximum Reverse Voltage -32 - - Maximum Turn-On Voltage 3.0 VDC 90 Vrms 18 Vrms Minimum Turn-Off Voltage 1.0 VDC 10 Vrms 4.0 Vrms Typical Input Current 3.4-20 mA 2.0-4.0 mA 3 mA Nominal Input Impedance [Ohms] 1500 Ohm 60 K Ohm 9.0 K Ohm Maximum Turn-On Time [msec] (4) 1/2 Cycle 10 10 Maximum Turn-Off Time [msec] 1/2 Cycle 40 40 GENERAL SPECIFICATIONS Description Parameters Dielectric Strength, Input/Output/Base (50/60Hz) 4000 Vrms Minimum Insulation Resistance (@ 500 V DC) 109 Ohm Maximum Capacitance, Input/Output 8 pF Ambient Operating Temperature Range -40 to 80 °C Ambient Storage Temperature Range -40 to 125 °C Weight (typical) 3 oz (86.5g) Encapsulation Thermally conductive Epoxy Terminals Screw and saddle Clamps Furnished, Unmounted Recommended Terminal Screw Torque Range: 6-32 Screws - 10 in/lbs. 8-32 & 10-32 Screws - 20 in. lbs. (Screws dry without grease) Fastons: Single pair (up to 25A) Double pair* (50A model only) *Caution: User must connect to both pairs GENERAL NOTES 1) All parameters at 25°C unless otherwi se specified. 2) Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 3) Heat sinking required, for derating curves s ee page 3. 4) Turn-on ti me for R andom turn-on versions is 0.02 msec (DC Control Models) For Contact information visit our web site. www.crydom.com ©2008 Crydom, Inc. Specifications subject to change without notice.
THERMAL DERATE INFORMATION AGENCY APPROVALS UL E116949 CSA LR81689 VDE 10143 UG (Not Applicable: -B and 4D) Rev. 070308 For Contact information visit our web site. www.crydom.com ©2008 Crydom, Inc. Specifications subject to change without notice.
For Contact information visit our web site. www.crydom.com ©2008 Crydom, Inc. Specifications subject to change without notice.
ANNEX - ENVIROMENTAL INFORMATION For Contact information visit our web site. www.crydom.com ©2008 Crydom, Inc. Specifications subject to change without notice.