2SD1651C SANYO | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

  • High speed.
  • High breakdown voltage(VCBO =1500V).
  • High reliability(Adoption of HVP process).
  • Adoption of MBIT process.
  • On-chip damper diode. Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Conditions Ratings Unit Collector-to-Base Voltage V CBO 1500 V Collector-to-Emitter Voltage V CEO 800 V Emitter-to-Base Voltage V EBO 6V Collector Current I C 6A Collector Current (Pulse) I CP 15 A Collector Dissipation P C 3.0 W Tc=25°C6 0 W Junction Temperature Tj 150 °C Storage Temperature Tstg - -55 to +150 °C Electrical Characteristics at Ta=25°C RatingsParameter Symbol Conditions min typ max Unit Collector Cutoff Current I CBO VCB =800V, IE=0 10 µA Collector Cutoff Current I CES VCE =1500V, RBE =0 1.0 mA Collector Sustain Voltage V CEO (sus) IC =100mA, IB=0 800 V Emitter Cutoff Current I EBO VEB =4V, IC =0 40 130 mA DC Current Gain hFE 1V CE =5V, IC =0.5A 10 hFE 2V CE =5V, IC =3.5A 5 8 Collector-to-Emitter Saturation Voltage VCE (sat) I C =3.15A, IB=0.63A 3 V Base-to-Emitter Saturation Voltage V BE (sat) I C =3.15A, IB=0.63A 1.5 V Continued on next page. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 2SD1651C Package Dimensions unit : mm 2174A [2SD1651C] N1501 TS IM TA-3439 NPN Triple Diffused Planar Silicon Transistor 1 : Base 2 : Collector 3 : Emitter SANYO : TO-3PMLH 21.0 5.0 22.0 0.8 20.4 4.0 16.0 3.4 2.0 2.8 2.1 5.45 5.45 0.7 0.9 3.5 8.0 5.6 3.1 12 3 Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein.

No.7086-2/4 Collector-to-Emitter V oltage, VCE -- V Collector Current, IC -- A Collector Current, IC -- A VCE (sat) -- IC Collector-to-Emitter Saturation V oltage, VCE (sat) -- V Collector Current, IC -- A hFE -- IC DC Current Gain, hFE Base-to-Emitter V oltage, VBE -- V IC -- VBE Collector Current, IC -- A IC -- VCE 0 13579 246 8 0.1 0.01 0.1 1.0 23 5 7 23 5 7 1.0 10 1.0 0.1 1.0 1023 5 7 23 5 7 IT01908 IT01910 IT01909 IT01911 0.2A 0.05A 0.4A 0.6A 0.8A 1.0A 2.0A 1.2A 1.4A 1.6A 1.8A -40 °C25 Ta=120 IB =0 V CE =5V V CE =5V 25°C - -40°C Ta=120 IC / IB =5 25°C 120°C Ta= - -40°C °C 120 Ta= - -40 Continued from preceding page. RatingsParameter Symbol Conditions min typ max Unit Fall Time t f IC =2A, IB1=0.4A, IB2=- -0.8A 0.3 µs Diode Forward Voltage V F IEC =6A 2 V Switching Time Test Circuit VR R B VCC =200VVBE = --2V + + 50Ω INPUT OUTPUT R L=100Ω 100µF 470 µF PW=20 µs IB1 D.C.≤1% IB2

No.7086-3/4 Ambient Temperature, Ta -- °C Collector Dissipation, PC -- W PC -- Ta Case Temperature, Tc -- °C Collector Dissipation, PC -- W PC -- Tc 20 40 60 80 100 120 140 160 3.0 3.5 0.5 1.0 1.5 2.0 2.5 IT01916 No heat sink 20 40 60 80 100 120 140 160 IT01917 Collector-to-Emitter V oltage, VCE -- V Collector Current, IC -- A Collector-to-Emitter V oltage, VCE -- V Reverse Bias A S O Collector Current, IC -- A Forward Bias A S O Collector Current, IC -- A Switching Time, SW Time -- µs SW Time -- IC SW Time -- IB2 Base Current, IB2 -- A Switching Time, SW Time -- µs 10 100 1000 0.1 1.0 23 5 7 23 5 7 23 IT01915 0.1 1.0 0.1 5 1.0 1023 7 5 23 7 IT01912 1.00.1 23 523 7 5 IT01913 1.0 0.1 0.01 0.1 1.0 1.0 10 100 100035 723 5 7 23 5 7 2 IT01914 tstg tf tstg tf V CC =200V IC =2A IB1 =0.4A R load DC operation 1ms 10ms 300 µs PT=100 µs L=500 µH IB2 = - -1AICP =15A IC =6A PC =60W V CC =200V IC / IB1 =5 IB2 / IB1 =2 R load Tc=25°C Single pulse Tc=25°C Single pulse

No.7086-4/4 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co. , Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of November, 2001. Specifications and information herein are subject to change without notice. PS