AGRF1100 MACOM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
308 Constitution Drive
Menlo Park, CA 94025-1164 Phone: 800-227-4856 www.circuitprotection.com PolySwitch® PTC Devices Overcurrent Protection Device PRODUCT: AGRF1100 DOCUMENT: SCD25238 PCN: D14148 REV LETTER: C REV DATE: MAY 13, 2011 PAGE NO.: 1 OF 2 Specification Status: RELEASED Electrical Rating Voltage: 16V DC MAX Insulating Material: Cured, Flame Retardant Epoxy Polymer Lead Material:
20 AWG Tin Plated Copper
(0.8 mm [0.032] nom. diameter) Part Marking: Manufacturer’s Mark and Voltage Lot Identification Part Identification GF11 (can be on back) TABLE I. INSTALLATION ENVELOPE DIMENSIONS: A B C D E F G MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX TYP MIN MA X *Rounded off approximation TABLE II. PERFORMANCE RATINGS: CURRENT RATINGS TIME TO TRIP INITIAL RESISTANCE R1 MAX 1 HR. POST TRIP RESISTANCE STANDARD TRIP RA MAX TRIPPED- STATE POWER DISSIPATION AMPS AT 25°C SECONDS AT 25°C, 55 A OHMS AT 25°C OHMS AT 25 C OHMS AT 25 C WATTS AT 25°C HOLD AT R1 MAX HOLD AT RA MAX TRIP MAX MIN MAX TYP Reference Documents: PS400, PS300 (reference for R 1 MAX ) Precedence: This specification takes precedence over documents referenced herein. Effectivity: Reference documents shall be the issue in effect on the date of invitation for bid. CAUTION: Operation beyond the rated voltage or current may result in rupture, electrical arcing or flame. Materials Information ROHS Compliant ELV Compliant Pb-Free
Menlo Park, CA 94025-1164 Phone: 800-227-4856 www.circuitprotection.com PolySwitch® PTC Devices Overcurrent Protection Device PRODUCT: AGRF1100 DOCUMENT: SCD25238 PCN: D14148 REV LETTER: C REV DATE: MAY 13, 2011 PAGE NO.: 2 OF 2 TABLE III. AUTOMOTIVE SPECIFIC STRESS TESTS AND TEST CONDITIONS: ELECTRICAL STRESS TESTS TEST CONDITIONS (see note 2) ESD Voltage Withstand (see note 1) 25kV Short Circuit Fault Current Durability 25 cycles, 16V, 200A Fault Current Durability 350 cycles, 16V/100A End-of-life Mode Verification 1750 cycles, 16V/100A Jump Start Endurance (see note 1) 3 cycles, 26V, 1 minute duration Load Dump Endurance (see note 1) 10 cycles, 86.5V Note 1: The PolySwitch devices are tested in series with a load resistance and the voltages specified in the test conditions are shared between the PolySwitch device and the load resistance as specified in PS400. Note 2: Please refer to Appendix A of PS400 for the detailed test procedures © 2004, 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All rights reserved.