D00669 ETC2 | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Temperature Controlled Soldering Station Page <1> 18/09/10 V1.0 http://www.farnell.com http://www.newark.com http://www.cpc.co.uk Features:
- Finger tip temperature regulator control (up/down buttons).
- Safe, low voltage 24V iron operation.
- Integral enclosed stand.
- Pull-out tray that houses the sponge.
- ESD version available.
- Mains on/off switch and fuse.
- Range of tips available. Specifications: Power supply voltage : 230 volt (220 to 240 volt)/50Hz. Electric iron power : 48 watt. Equipment power supply fuse : T1 A/250 volt (50 x 20mm glass pipe). Regulating scope of temperature : 150° to 450°C. Temperature display : 2 x 31/2 grades LCD display. Display scope : 150° to 450°C. Display precision : 5%. Circumstance humidity : +5°C to +40°C. Relative humidity : <85% (not in humidification). Atmospheric pressure : 600 to 1000HPa. Shell size (W x H x D) : 195 x 87 x 155mm (without electric iron). Weight : About 2000 grams. Specification Table Description Voltage Supply (V) Part Number Soldering Station, UK Plug 220 to 240 D00661 Soldering Station, UK Plug, ESD D00662 Soldering Iron Description RoHS Compliant Body Diameter Length Body Length Lead Length (m) Supply AC Voltage Part Number Replacement Soldering Iron Yes 20 198 125 1.1 24 D00663 Dimensions : Millimetres Element For Soldering Iron Description RoHS Compliant Part Number Heating Element, for Iron, 88 to 201A Yes D00664 Sponges Description Length External Width Part Number Replacement Sponge, PK5 71 41 D0065 Dimensions : Millimetres Dimensions : Millimetres
Temperature Controlled Soldering Station Page <2> 18/09/10 V1.0 http://www.farnell.com http://www.newark.com http://www.cpc.co.uk Disclaimer This data sheet and its contents (the "Information") belong to the Premier Farnell Group (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group w as aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. DURATOOL is the registered trademark of the Group. © Premier Farnell plc 2010. Sponges Description Tip Type Tip Length Tip Size Length Part Number TIP, Soldering, Pointed, 1.0mm Pointed 1.0 D00666 TIP, Soldering, Pointed, 0.5mm Pointed 0.5 D00667 TIP, Soldering, Chisel, 3mm Chisel (45°) 3.0 D00668 TIP, Soldering, Flat, 2.0mm Screwdriver 2.0 D00669 TIP, Soldering, Bevel, 1.0mm Chisel (45°) 1.0 D00670 Dimensions : Millimetres