CXO3MHG IQD | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Crystal Clock Oscillator Specification ISSUE 1; May 2016 Outline (mm) -SM1 = SM1 (Gold Plated, RoHS compliant)
Description
Not recommended for new designs, please see model CXOMK 3.3V Intended for applications requiring shock survivability to 10,000G (and higher), the surface-mount CXO3MHG oscillator is a high-shock version of the CXO3M oscillator. These oscillators consist of a miniature quartz crystal and a hybrid circuit in a low-profile ceramic package with an extremely small footprint. -SM1 SM1 (Gold Plated, RoHS compliant) -SM5 SM5 (Solder Dipped, RoHS compliant) Please note that all data is only valid at 25°C unless otherwise stated. Frequency Parameters Frequency 200.0kHz to 220.0MHz ±100.00ppm to ±10,000.00ppmFrequency Tolerance @ 25°CTolerance Condition Frequency Stability ±50.00ppm to ±100.00ppm ±10ppm max in 1st yearAgeing Electrical Parameters 3.3V ±10%Supply Voltage Supply Voltage (absolute maximum rating): -0.5V to 7.0V Operating Temperature Ranges -10 to 70°C -40 to 85°C -55 to 125°C Output Details Output Compatability CMOS Drive Capability 15pF Output Control Start Up Tme: 5ms max Enable/Disable (EN): Logic 1 to pad 1, output enabled Logic 0 to pad 1, output disabled, output goes to high impedance state, current consumption very low. Internal oscillator stops. Output recovery is delayed. No Connection (NC): Pad 1 No Connection Tri State (TS): Logic 1 to pad 1, output enabled Logic 0 to pad 1, output disabled, output goes to high impedance state, current consumption low. Internal oscillator continues to function. Output recovery is immediate. Environmental Parameters Shock: 10000G, 0.3ms, 1/2 sine Vibration: MIL-STD-202G, Method 204D, Condition D: 20G, 10Hz-2000Hz swept sine Storage Temperature Range: -55 to 125°C Printed on 18 May 16 12:03 using Model Data Sheet V1.2550 Page 1 of 2 Sales Office Contact Details: USA: +1.760.318.2824 France: 0800 901 383UK: +44 (0)1460 270200 Germany: 0800 1808 443 Email: info@iqdfrequencyproducts.com Web: www.iqdfrequencyproducts.com
Crystal Clock Oscillator Specification Manufacturing Details Features: High shock resistance Designed for surface mount applications using infrared, vapour phase or epoxy mount techniques CMOS and TTL compatible Low power consumption Optional Output Enable/Disable with Tri-State Low EMI emission Full military testing available Applications: Military & Aerospace - Smart munitions Projectile electronics Industrial - Engine control Down-hole drilling Maximum Process Temperature: 260°C, 20 seconds
Ordering Information
Frequency* Model* Termination Variant* Output Frequency Tolerance (@ 25°C)* Frequency Stability* Operating Temperature Range* Pad 1 Function* (*minimum required) Termination Variants: SM1 = Gold Plated / SM5 = Solder Dipped (Note: Non-RoHS compliant terminations also available - SM3 = Solder Dipped) Example 10.0MHz CXO3MHG SM1 CMOS ±100ppm ±100ppm -40 to 85 TS Compliance CompliantRoHS Status (2011/65/EU) CompliantREACh Status MSL Rating (JDEC-STD-033): Not Applicable Packaging Details TrayPack Style: Tray Pack Size: 1 Tape & reel in accordance with EIA-481-DPack Style: Reel Pack Size: 1,000 Electrical Specification - maximum limiting values 3.3V ±10% Frequency Min Frequency Max Temperature Range Stability (Min) Current Draw Rise and Fall Time Duty Cycle °C ppm mA ns % 6-10 to 70 200.0kHz 220.0MHz ±50.0 - 40/60% 6-40 to 85 ±100.0 - 40/60% 6-55 to 125 ±100.0 - 40/60% This document was correct at the time of printing; please contact your local sales office for the latest version. Click to view latest version on our website. Printed on 18 May 16 12:03 using Model Data Sheet V1.2550 Page 2 of 2 Sales Office Contact Details: USA: +1.760.318.2824 France: 0800 901 383UK: +44 (0)1460 270200 Germany: 0800 1808 443 Email: info@iqdfrequencyproducts.com Web: www.iqdfrequencyproducts.com