CXM5S SENSATA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 5

Technical content

Features

  • Adapted to food and beverage – pharmaceutic - river – offshore applications,
  • Stainless steel encoder (316) with hygienic design,
  • Flanges and shaft adapted to the market needs,
  • Robustness and excellent resistance to shocks / vibrations,
  • Double ball bearings with safety lock system,
  • Solid shaft version 10mm,
  • High protection level IP69K,
  • Universal electronic circuits from 5 to 30Vdc,
  • CANopen interface,
  • High performances in temperature –20°C to 85° (-30°C option),
  • Optical technology, contactless,
  • High resolutions up to 4 096 points pre turn (213)
  • Adapted axial cable gland output. SPECIFICATIONS Material Shaft: Stainless Steel 316 Cover: Stainless Steel 316 Body: Stainless Steel 316 Bearings Double ball bearings Maximal Loads Axial: 250 N Radial: 500 N Shaft Inertia ≤ 1,2.10-6 kg.m2 Torque ≤ 90.10-3 N.m Permissable Max. Speed 4,000 min-1 Continuous Max. Speed 3,000 min-1 Shocks (EN60068-2-27) ≤ 500 m.s-2 (during 6 ms) Vibrations (EN60068-2-6) ≤ 100 m.s-2 (10… 2 000 Hz) EMC EN 61000-6-4, EN 61000-6-2 Isolation 500V (1min) Encoder Weight (Approx.) 0,600 kg Operating Temperature - 20 ... 85°C (encoder T°) Storage Temperature - 40 ... + 85°C Protection (EN 60529) IP 69K Theoretical mechanical lifetime 109 turns (Faxial / Fradial)

50 N / 100 N 12

250 N / 500 N 0,5

www.sensata.com Page 2 Copyright © 2018 Sensata Technologies, Inc. Power Supply 5 - 30Vdc Introduction < 1 s Consumption (Without Load) < 50mA (at 24Vdc) Accuracy ± ½ LSB (13 bits) ELECTRICAL DATA PROGRAMMABLE PARAMETERS COMMUNICATION MODES Resolution: defines the resolution per revolution (0 to 8 192), Transmission Speed: programmable from 10kBaud (1000m) to 1 Mbaud (40 m) ; value per default: 20 Kbaud, Address: define the software address of the encoder on the bus (1 to 127, value by default: id = 1), Direction: define the direction of count of the encoder, RAX: defines the value of its preset position (non turning shaft), CAM: Low and High Limits. 3 modes are available to interrogate the encoder: POLLING mode: (Response to a RTR message): The position value is only given upon request (SDO mode), CYCLIC mode: the encoder transmits its position in an asynchronous manner. The frequency of the transmission is defined by the programmable cyclical timer register from 0 to 65 535 ms, SYNCHRO mode: the encoder transmits its position on a synchronous demand by the master. Note: Refer to the bus standards for the maximal derivation length. CONNECTION Type +Vcc 0V CAN Low CAN High CAN Gnd 00 BN Brown WH White YE Yellow GN Green GY Grey

www.sensata.com Page 3 Copyright © 2018 Sensata Technologies, Inc. Dimensions in mm DIMENSIONS

www.sensata.com Page 4 Copyright © 2018 Sensata Technologies, Inc. ORDERING OPTIONS Family Shaft Ø Mechanics Supply Output Code Resolution Cable Orientation CXM5S Optical – stainless steel 58mm encoder 10: 10mm AA: 316 stainless steel IP69K Hygienic design P: 5 to 30Vdc BB: CANopen B: Binary 12: 4096 points per revolution (212) BX: 8230/020 PVC cable A020: Axial Cable 2m CXM5S 10 AA P BB B 12 00 A-**TF Example : CXM5S10/AA/PBBB//12//00A-**TF Contact the factory for special versions, ex: special flanges, electronics, connections… //// //

+1 (800) 350 2727 – Option 1 sales.beisensors@sensata.com Europe, Middle East & Africa +33 (3) 88 20 8080 position-info.eu@sensata.com Asia Pacific sales.isasia@list.sensata.com China +86 (21) 2306 1500 Japan +81 (45) 277 7117 Korea +82 (31) 601 2004 India +91 (80) 67920890 Rest of Asia +886 (2) 27602006 ext 2808 AGENCY APPROVALS & CERTIFICATIONS Page 5 Rev:05/17/18 www.sensata.com CONTACT USCopyright © 2018 Sensata Technologies, Inc. Sensata Technologies, Inc. (“Sensata”) data sheets are solely intended to assist designers (“Buyers”) who are developing systems that incorporate Sensata products (also referred to herein as “components”). Buyer understands and agrees that Buyer remains responsible for using its independent analysis, evaluation and judgment in designing Buyer’s systems and products. Sensata data sheets have been created using standard laboratory conditions and engineering practices. Sensata has not conducted any testing other than that specifically described in the published documentation for a particular data sheet. Sensata may make corrections, enhancements, improvements and other changes to its data sheets or components without notice. Buyers are authorized to use Sensata data sheets with the Sensata component(s) identified in each particular data sheet. HOWEVER, NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE TO ANY OTHER SENSATA INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY THIRD PARTY TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT, IS GRANTED HEREIN. SENSATA DATA SHEETS ARE PROVIDED “AS IS”. SENSATA MAKES NO WARRANTIES OR REPRESENTATIONS WITH REGARD TO THE DATA SHEETS OR USE OF THE DATA SHEETS, EXPRESS, IMPLIED OR STATUTORY , INCLUDING ACCURACY OR COMPLETENESS. SENSATA DISCLAIMS ANY WARRANTY OF TITLE AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY , FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT, QUIET POSSESSION, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHTS WITH REGARD TO SENSATA DATA SHEETS OR USE THEREOF. All products are sold subject to Sensata’s terms and conditions of sale supplied at www.sensata.com SENSATA ASSUMES NO LIABILITY FOR APPLICATIONS ASSISTANCE OR THE DESIGN OF BUYERS’ PRODUCTS. BUYER ACKNOWLEDGES AND AGREES THAT IT IS SOLELY RESPONSIBLE FOR COMPLIANCE WITH ALL LEGAL, REGULATORY AND SAFETY-RELATED REQUIREMENTS CONCERNING ITS PRODUCTS, AND ANY USE OF SENSATA COMPONENTS IN ITS APPLICATIONS, NOTWITHSTANDING ANY APPLICATIONS-RELATED INFORMATION OR SUPPORT THAT MAY BE PROVIDED BY SENSATA. Mailing Address: Sensata Technologies, Inc., 529 Pleasant Street, Attleboro, MA 02703, USA.