CX65002 SKYWORKS | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 11
Technical content
Table 1. CX65002 Signal Descriptions
1 NC No connection 5 VCC2 Supply voltage
2 VB Input bias for amplifier driver 6 RFOUT RF output
3 RFIN RF input 7 RFOUT RF output
4 Y Output of internal bias circuit 8 VCC1 Supply voltage
Table 2. CX65002 Absolute Maximum Ratings parameters set at or below their nominal value. amplifier to be set to a desired operating frequency. amplifier operational mode to Class A, B, or AB. subjected to high temperature during solder assembly. exceeds 300 °C for more than 10 seconds. done manually or in a production solder reflow environment. Application Note, Tape and Reel, document number 101568. Table 2. The recommended operating conditions are specified in Table 3 and electrical specifications are provided in Table 4.
Figure 15. Evaluation Board Assembly Diagram
Figure 16. Evaluation Board Layer Detail
DATA SHEET • CX65002 Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 101467E • Skyworks Proprietary and Confiden tial information • Products and Product Information are Subject to Change Without Notice • October 11, 2004 11
Ordering Information
Model Name Manufacturing Part Numb er Evaluation Kit Part Number CX65002 700-1400 MHz Linear Power Amplifier Driver CX 65002-12 TW10-D252 (tuned for optimum OIP3 @ 900 MHz ) TW10-D253 (tuned for optimum ACPR @ 881.5 MHz) Copyright © 2003, 2004, Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products. These materials are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials. Skyworks may make changes to its documentation, products, specifications and product descriptions at any time, without notice. Skyworks makes no commitment to update the information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from future changes to its documentation, products, specifications and product descriptions. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by or under this document. Except as may be provided in Skyworks Terms and Conditions of Sale for such products, Skyworks assumes no liability whatsoever in association with its documentation, products, specifications and product descriptions. THESE MATERIALS ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED OR OTHERWISE, RELATING TO SALE AND/OR USE OF SKYWORKS PRODUCTS INCLUDING WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. SKYWORKS FURTHER DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THESE MATERIALS WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. The following are trademarks of Skyworks Solutions, Inc.: Skyworks™, the Skyworks logo, and Breakthrough Simplicity™. Product names or services listed in this publication are for identification purposes only, and may be trademarks of Skyworks or other third parties. Third-party brands and names are the property of their respective owners. Additional information, posted at www.skyworksinc.com, is incorporated by reference.