DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 12
Technical content
Issued Date. 2012/ 6/29 TO: Digi-Key Note:In case of specification change, KYOCERA Part Number also will be changed. Product Name Quartz Crystal Product Model CX3225GA KYOCERA Part Number per KB101-12306-431 3/12 Remarks RoHS Compliant, MSL 1, AEC-Q200 compliant Confirmation of stable oscillation of a crystal oscillation circuit is necessary at the design stage to prevent critical failures for automotive crystal units which are used to control vehicles and secure safety. It is strongly recommended to provide us a test circuit board and let us implement the circuit verification upon your use of our automotive crystal units. Customer Acceptance pore ere) | Seller Manufacturer KYOCERA Corporation KYOCERA Crystal Device Corporation (Electronic Components Sales Division) (Marketing & Sales Engineering Division) 6 Takeda Tobadono-cho, Fushimi-ku, Kyoto 1-8-1, Izumi-hontyo, Komae-shi, Tokyo. 612-8501 Japan 201-8648 Japan TEL. No. 075-604-3500 TEL. No. 03-5497-3111 FAX. No. 075-604-3501 FAX. No. 03-5497-3209 KYOCERA Crystal Device Yamagata Corporation . Crystal Units Overseas Design Section 5 / ; } fo Crystal Units Division 1 / OD / h ‘ [ } ya ——— } WANG] N Vi A) lle KYOCERA Crystal Device Corporation KBS-5079D
Revision History
[RevNo. | Description ofrevse | Ode | Awoesty | Cheseity | tumiby | First Edition JUN.29,2012 CNN ZZ pal YO KYOCERA Crystal Device Corporation KBS-5079D
[PART NUMBER LIST] fee oe | Se Frequency Part number (Q) Frequency (MHz) Code eco | omacmmccrna | | oo | Pe | oescammmrna |e | rom | wo KYOCERA Crystal Device Corporation KBS-5079D
- APPLICATION This specification sheet is applied to quartz crystal “CX3225GA”" 2. KYOCERA PART NUMBER per KB101-12306-431 3/12 3. RATINGS ee Storage TonpereRange | tage | =| S| 4. CHARACTERISTICS : 4-1 ELECTRICAL CHARACTERISTICS j Electrical Specification Test Condition | Remarks | syMB. [Min [Typ | Max | Unit | waa [Of Rint Nominal FO x MHz Frequency Nominal Tom 25 °C Temperature Frequency dfiF +50.0 +25 43°C Tolerance Frequency dir | -1500 +150.0 -40~+150°C ; Temperature Characteristics Frequency Aging +5.0 1 year +25 +3°C Rate Equivalent Series ESR x Q Resistance pee eee Insulation 500 MQ 100V(DC) Resistance 3X per KB101-12306-431 3/12 . KYOCERA Crystal Device Corporation KBS-5079D
- APPEARANCES, PHYSICAL DIMENSION OUTLINE DIMENSION (not to scale) 3.2040.10 (ee “Po eee | wo of/ol|N 5/5|° ROS Hd oO] wo 2 | 2 0.60+0.10 ele <—| o UNIT: mm 0.15) \\ 40) MARKING @ Nominal Frequency Move the number of maximum indication beams of the frequency to five digits, and omit less than kHz. 3X per KB101-12306-431 3/12 @ Identification @ Date Code Year::-LAST 1 DIGIT of YEAR AND WEEK >< For details to LOT CALENDAR (Ex) JUN.29, 2012 —> 226 @ Manufacturing Location F---KYOCERA Crystal Device Philippines, Inc XThe font of marking is reference. KYOCERA Crystal Device Corporation KBS-5079D
- RECOMMENDED LAND PATTERN (not to scale) | 16 : es 16 | a a Lhd . 7. Quality Assurance Location KYOCERA Crystal Device Philippines, Inc. : KYOCERA Crystal Device Philippines, Inc. Quality Assurance Division Quality guarantee When the failure by the responsibility of our company occurs clearly after delivery within 1 year, a substitute article etc. is appropriated gratuitously and this is guaranteed. However, when passing 1 year after delivery, there is a case where | am allowed to consider as onerous repair after both consultation. - t KYOCERA Crystal Device Corporation KBS-5079D
8.TAPING & REEL 8-1.Dimensions 105-015 oo ADO, < 91552005 Unreeling direction La OO 0 Of OOO} Wen A at 4 3 /H 7] 2 Hs | \\ z 2 \\SY1o| OQ V \\ : | (30) < da
28401 V ay 40+01 Fs
S| = 8-2.Leader and trailer tape Empty compartment Components Empty compartment Leader On ys LH UOUOOUA¢-2 160mm ormore 100mm ormore I 400~560mm 8-3.Direction (The direction shall be seen from the top cover tape side) O0o0oO0°0O Unreeiing direction (QO000Q/ | ——— 8-4.Specification 1. Material of the carrier tape shall be PS (ESD). 2. Matetial ofthe seal tape shal be polyeste(ESD). 3. The seal tape shall not cover the sprocket holes. And not protrude from the carrier tape. 4. Tensie strength ofthe tape : 10N or more. 5. The Rofthe comer without designation is 0.2RMAX. 6. Disaignment between centers of the cavity and sprocket hole shall be 0,05mm or less. 7. Cumulative pitch tolerance of P;'shall be -+0,2mm at 10 pitches. 8 The number of lack is 0.1% of 1 reel total part number (the number of the table letters) or the part folowing whose 1 ethers big. (But, the thing which lack of the continuance is not in.) 9. Themarking on parts is not fixed its direction, is electrical characteristic is equal. 10. Peeing force of the seal tape: 0.1 to 1.0N. EE corertape _ comete KYOCERA Crystal Device Corporation KBS-5079D
8-5.Reel specifications i ‘¢ DO x ° (IE@>L ) 8 ' oii’ f Ww j H ' . A ' 1 t i (Nonconductor type Reel) In the case of © 180 Reel (3000 pcs max) SG [smb wt (Unit : mm) KYOCERA Crystal Device Corporation KBS-5079D
9.Enviromental requirements After following test, frequency shall not change more than +10 107° And Cl, +20% or 5Q of large value.
9.1 Resistance to Shock Test condition
Natural dropped from height 100cm onto hard wood board in 3 times
9.2 Resistance to Vibration Test condition
frequency : 10-55 —10Hz Amplitude > 1.5mm Cycle time : 15 minutes Direction : XYZ (3direction),2 h each.
9.3 Resistance to Heat Test condition
The quartz crystal unit shall be stored ata temperature of +150+ 2°C for 500 h. Then it shal be subjected to standard atmospheric conditions for 1 h ,after whichi measurement shall be made.
9.4 Resistance to Cold Test condition
The quartz crystal unit shall be stored at a temperature of —40+2°C for 500 h. Then it shal be subjected to standard atmospheric conditions for 1 h ,after whichi measurement shall be made.
9.5 Thermal Shock Test condition
The quartz crystal unit shall be subjected to 500 succesive change of temperature cycles , each as shown in table below, Then it shall be subjected to standard atmospheric conditions for 1h, after which measurements shall be made. Cycle 1 —40+2°C (30min.) ~25+2°C (6min.) ~+150£2°C (30min.) ~25+2°C min.) KYOCERA Crystal Device Corporation KBS-5079D
9.6 Resistance to Moisture Test condition
The quartz crystal unit shall be stored ata temperature of 60+ 2°C wich relative humidity of 90% to 95% for 240 h. Then it shall be subjected to standard atmospheric conditions for 1h, after which measurements shall be made
9.7 Soldering condition 1) Material of solder
Kind --- lead free solder paste Melting point --- 220+5°C. 2) Temp.profile of reflow soldering system Temp °c} 70 (max) Preheating 180 (typ.) 100 (typ.) : [ots 200 (ra) . Temp. profile of reflow 400 5 300 5 200 100 60s <—_ ——> Time . 3) Hand Soldering Temperature: 350°C, Time: 3sec .
9.8 Intensity for bending in circuit board
Solder this product in center of the circuit board of 40mm 100mm, and add the deflection of 3mm as the bottom figure. Test board : t=1.6mm PUSH 20 board a UL J e | *, a i ct | “ED PE CRSESESESESESESIERSISESESESESESTS ©) “)\\r5 Gd i ; (CX3225GA, i 1 45 4 : a KYOCERA Crystal Device Corporation KBS-5079D .
10.Cautions for use (1) Automatic mounting machine use Please use after affirmation that select the mounting machine model with a shock small if possible in the case of use of an automatic mounting machine, and it does not have breakage. There is a risk of a quartz crystal unit breakage occurring and not functioning normally by too much shock etc.. (2) Conformity of a circuit In case of use of an oscillation circuit, please insert in a quartz crystal unit in series resistance 5 time as many as the standard value of equivalent in-series resistance, and confirm oscillating. Please remove resistance which inserted after the notes above-mentioned examination in the quartz crystal unit in series, and use it (3) After making the Quartz Crystal mount on a printed circuit board ,ifitis required to devide the printed circuit board into another one, use it with attentive confirmation so that a warp cased by this dividing might not affect any damage. When designing a printed circuit board as well as handling the mounting As much as possible. The quartz crystal shall be passed through the reflow fumace. Then it shall be subjected to standard atmospheric conditions, after which cleaning shall be made. 11.Storage conditions Storage at prolonged high temperature or low temperature and the storage by high humidity cause degradation of frequency accuracy, and degradation of soldering nature. Storage is performed at the temperature of 18-30 degrees C, and the humidity of 20-70 Percent in the state of packing, and a term is 6 months. 12,Others When any questions and opinions are in the written matter of these delivery specifications, | will ask connection of you from the our company issue day within 45 days. In a connection no case, a written matter is consented to it and employed within a term. KYOCERA Crystal Device Corporation KBS-5079D
13.LOT CALENDAR WEEK |MONTH TUE | WED| THU] FRI | SAT|SUN| | WEEK TUE | WED| THU | FRI | SAT Pr irlelelslelsts|/ a falals|alsial2/s| | | | ty] | ta rld dd adi [2343 4 7 9 Lt i 2 4 19 |g od Wd od od 1g Lid 17 1q 19 2d 21 od | 16 4719 1 20 21 2d s| x x1 | 2 4 4 § 2, a1 i 4 4 4 9 Lez 4 dd wl 1 Vd dd dd 4 1d 14 19 14 17 1€ 1g 921 2d 2d ad af 2 | 200 | s | 21 29 od | ad 4 -jideaaid gd Lae a4 do i Lad 1] 1d 14 14 19 1 Peeeeee 424 27 24 od od of | 20 || 4 2 4 4 8 6 7 24444 74 8 9 td nl 1 td 14 [gd id od od 1g ltd 17 iq 18 od ot 2d Pereeeer: nada si i 4 4 4 s| a 144 4 5 6 Ls 474d i dd go nf 1g Lf 14 14 tq td 17 1 14 19 14 1 1q 14 2 1g 2d 21 24 24 24 29 12 | 24 24 28 od ad 1 6 2 dd of 1d 3 (i 49474 q 4 dd did didi) | i 2 td 1 19 1g [td tf 2d 21 24 23 24 24 2524 271 24 20 2 1 | 24 29 21 24 od ol iol | | | | Ty KYOCERA Crystal Device Corporation KBS-5079D