CX0805MKNP08BB0

CX0805MRX7R8BB223 CDIL | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 16

Technical content

X2Y Series®

10 V TO 100 V

Product Specification – Nov. 21, 2006 V.11

Phycomp Product specification Surface-mount ceramic EMI filter capacitors X2Y® Series

FEATURES

• Broadband Filtering and Decoupling: X2Y® is effective up to 10 GHz and frequencies beyond
• Ultra Low ESL: Noise cancellation within X2Y® makes ESL reducing from nanohenry to picohenry levels
• Bypass: Unlike feedthrough capacitors, X2Y® is in bypass, so no DC current limitations
• Matched Y-caps: Two tightly matched line to ground capacitors in one device
• Superior Balance: Temperature and voltage variations balanced of two Y-caps
• Aging Reliability: Aging effects are equal on two Y- caps
• Fewer Component in Decoupling: Up to 1:7 replacement of MLCC in power delivering system bypass networks
• Superior Performance in Decoupling: Large or small, X2Y® components exhibit ultra low ESL
• Total Cost Savings: Assembly cost savings through reduced component count and placement costs
• Board Level Design Advantages: Dramatically reduces via drills, which blocks routing

APPLICATIONS

• EMI filtering on DC motors
• Filtered connectors (airbag connectors, RJ-45 connectors)
• High speed data-line filtering
• Decoupling of supply-lines in high speed digital circuits
• Broadband filtering.
• Amplifier decoupling and EMI suppression.
• IC Decoupling, on-package, on- PCB.
• DC power line filtering.
• Data line filtering.
• EMI suppression for DC motors.
• Sensors
• Audio SCM049_V Fig.1 Circuit of typical applications Decoupling application EMI filtering application A B B A G1 G2 B A
• Superior Performance in Filtering: One X2Y® can eliminate both differential and common mode noises BENEFITS
• Fewer Component in Filtering: One X2Y® can replace multiple inductors and/or capacitors

DESCRIPTION

X2Y® series is a breakthrough in the design of ceramic multilayer products for decoupling and filtering in an IPD (integrated passive device). X2Y® products comprise two identical Y-capacitors and one X-capacitor, integrated into a 4 terminal device, which is available in standard MLCC sizes. Thanks to the unique multilayer construction the device provides noise cancellation within the device, reducing ESL from nanohenry to picohenry levels. Using the unique balance between the Y-capacitors and the shielded multilayer structure the X2Y® products offer superior decoupling and filtering. The X2Y® device performs as a broadband filter enabling better EMC compliance for electrical equipment in a wide range of applications. 2006 Nov.21 V.11 2 www.yageo.com

Phycomp Product specification Surface-mount ceramic EMI filter capacitors X2Y® Series 2006 Nov.21 V.11 3 www.yageo.com QUICK REFERENCE DATA DESCRIPTION VALUE Materials X7R Rated voltage 10 V, 16 V, 25 V, 50/63 V, 100 V (IEC) Capacitance range (Y-capacitor): 0603 series 1.5 nF to 100 nF 0805 series 4.7 nF to 180 nF 1206 series 22 nF to 820 nF 1210 series 47 nF to 1 µF 1410 series 390 nF Tolerance on capacitance ±20% Test voltage (DC) for 1 minute 2.5 × Ur Sectional specifications IEC 60384-10, second edition 1989-04; also based on CECC 32 100 Detailed specification based on CECC 32 101-801 Climatic category (IEC 60068) X7R: 55/125/56

Phycomp Product specification Surface-mount ceramic EMI filter capacitors X2Y® Series 2006 Nov.21 V.11 4 www.yageo.com GENERAL SELECTION CHART X7R C (pF) 0603 0805 1206 1210 1410 100 220 330 1, 500 2, 200 4, 700 5, 600 100 V 10, 000 50 V/63 V 100 V 15,000 18 ,000

50 V/63 V

22 ,000

25 V 100 V

39 ,000 25 V 47 ,000 16 V 50 V/63 V 56 ,000 100 V 100, 000 10 V 16 V 180, 000 10 V 25 V 220, 000 270, 000 330, 000 390, 000 16 V 50 V 470, 000 560, 000 25 V 820, 000 10 V 1 000, 000 16 V

Phycomp Product specification Surface-mount ceramic EMI filter capacitors X2Y® Series 2006 Nov.21 V.11 5 www.yageo.com For dimensions see Table 1. MECHANICAL DATA SCM051L A C W T Simplified typeComponent type equivalent circuit configuration Cy Cx Cy line line ground ground line line Fig.2. Component outline & simplified outline Physical dimensions Table 1 Capacitor dimensions T A CASE SIZE L W MIN. MAX. MIN. MAX. C Dimensions in millimetres Dimensions in inches

Phycomp Product specification Surface-mount ceramic EMI filter capacitors X2Y® Series 2006 Nov.21 V.11 6 www.yageo.com ELECTRICAL CHARACTERISTICS FOR X7R Class 2 capacitors; X7R dielectric; NiSn terminations Unless otherwise stated all electrical values apply at an ambient temperature of 20 ±1 °C, an atmospheric pressure of 86 to 106 kPa, and a relative humidity of 63 to 67%. DESCRIPTION VALUE Rated voltage Ur (DC) 10 V, 16 V, 25 V, 50 V/63 V and 100 V Capacitance range 1.5 nF to 1 µF Tolerance on capacitance after 1,000 hours ±20% Dissipation factor (D.F.); note 1

10 V 5%

16 V 3.5% ≥25 V 2.5% Insulation resistance after 1 minute at Ur (DC) Rins × C > 500 seconds Maximum capacitance change as a function of temperature ±15% Aging Typical 1% per time decade Note 1. Measured at 20 °C, 1 V and 1 MHz, using a four-gauge method.

Phycomp Product specification Surface-mount ceramic EMI filter capacitors X2Y® Series SELECTION CHART FOR X7R SIZES 0603, 0805, 1206 (1) Y-CAPACITOR X-CAPACITOR SIZE CAP. (nF) VOLTAGE RATING (V) CAP. (nF) VOLTAGE RATING (V) THICKNESS (mm) CTC ORDERING CODE (2) (3) 1.5 100 0.75 200 0.60 CX 0603 MR X7R 0BB 152 2.2 100 1.1 200 0.60 CX 0603 MR X7R 0BB 222 4.7 100 2.4 200 0.60 CX 0603 MR X7R 0BB 472 5.6 100 2.8 200 0.60 CX 0603 MR X7R 0BB 562 10 50 / 63 5 100 0.60 CX 0603 MR X7R 9BB 103 22 25 11 50 0.60 CX 0603 MR X7R 7BB 223 47 16 24 32 0.60 CX 0603 MR X7R 7BB 473 56 16 28 32 0.60 CX 0603 MR X7R 8BB 563 0603 100 10 50 20 0.60 CX 0603 MR X7R 6BB 104 4.7 100 24 200 0.85 CX 0805 MR X7R 0BB 472 0805 10 100 5 200 0.85 CX 0805 MR X7R 0BB 103 15 50 / 63 8 100 0.85 CX 0805 MR X7R 9BB 153 18 50 / 63 9 100 0.85 CX 0805 MR X7R 9BB 183 22 25 11 50 0.85 CX 0805 MR X7R 8BB 223 39 25 20 50 0.85 CX 0805 MR X7R 8BB 393 47 16 24 32 0.85 CX 0805 MR X7R 7BB 473 100 16 50 32 0.85 CX 0805 MR X7R 7BB 104 180 10 90 20 0.85 CX 0805 MR X7R 7BB 184 22 100 11 200 1.20 CX 1206 MK X7R 0BB 223 47 50 / 63 24 100 1.20 CX 1206 MK X7R 9BB 473 1206 100 50 / 63 50 100 1.20 CX 1206 MK X7R 9BB 104 180 25 90 50 1.20 CX 1206 MK X7R 8BB 184 220 16 110 32 1.20 CX 1206 MK X7R 7BB 224 390 16 195 32 1.20 CX 1206 MK X7R 7BB 394 470 10 235 20 1.20 CX 1206 MK X7R 6BB 474 820 10 410 20 1.20 CX 1206 MK X7R 6BB 824 Notes 1. Other values available on request. 2. Ordering codes for preferred versions (±20% tolerance, 180 mm reel). For other packing and tolerance see section “Ordering Code Information”. 3. For 12NC ordering codes see Table 2. 2006 Nov.21 V.11 7 www.yageo.com

Phycomp Product specification Surface-mount ceramic EMI filter capacitors X2Y® Series 2006 Nov.21 V.11 8 www.yageo.com SELECTION CHART FOR X7R SIZES 1210, 1410 (1) Y-CAPACITOR X-CAPACITOR SIZE CAP. (nF) VOLTAGE RATING (V) CAP. (nF) VOLTAGE RATING (V) THICKNESS (mm) CTC ORDERING CODE (2) (3) 47 100 24 200 1.20 CX 1210 MK X7R 0BB 473 100 50 / 63 50 100 1.20 CX 1210 MK X7R 9BB 104 220 50 / 63 110 1210 100 1.60 CX 1210 MK X7R 9BB 224 470 25 235 50 1.60 CX 1210 MK X7R 8BB 474 560 25 280 50 1.90 CX 1210 MK X7R 8BB 564 820 16 410 32 1.60 CX 1210 MK X7R 7BB 824 1,000 16 500 32 1.60 CX 1210 MK X7R 7BB 105 1410 390 50 195 100 1.30 CX 1410 MK X7R 9BB 394 Notes 1. Other values available on request. 2. Ordering codes for preferred versions (±20% tolerance, 180 mm reel). For other packing and tolerance see section “Ordering Code Information”. 3. For 12NC ordering codes see Table 2. Thickness classification and packing quantities for X7R QUANTITY PER REEL 8 mm TAPE WIDTH ∅180 mm; 7" THICKNESS CLASSIFICATION (mm) PAPER BLISTER 0.6 ±0.1 4,000 − 0.85 ±0.1 4,000 − 1.2 ±0.15 − 2,500 1.6 ±0.15 − 2,500 1.9 ±0.2 − 2,500

Phycomp Product specification Surface-mount ceramic EMI filter capacitors X2Y® Series 2006 Nov.21 V.11 9 www.yageo.com

ORDERING INFORMATION

Components may be ordered by using Yageo part number. Table 2 TC CAPACITANCE VALUE CAPACITANCE TOLERANCE RATED VOLTAGE (V) CTC ORDERING CODE QUANTITY PER REEL SIZE Y-CAP Y-CAP Y-CAP X7R 0603 1.5 nF ±20% 100 CX 0603 MR X7R 0BB 152 4,000 X7R 0603 2.2 nF ±20% 100 CX 0603 MR X7R 0BB 222 4,000 X7R 0603 4.7 nF ±20% 100 CX 0603 MR X7R 0BB 472 4,000 X7R 0603 5.6 nF ±20% 100 CX 0603 MR X7R 0BB 562 4,000 X7R 0603 10 nF ±20% 50 / 63 CX 0603 MR X7R 9BB 103 4,000 X7R 0603 22 nF ±20% 25 CX 0603 MR X7R 8BB 223 4,000 X7R 0603 47 nF ±20% 16 CX 0603 MR X7R 7BB 473 4,000 X7R 0603 56 nF ±20% 16 CX 0603 MR X7R 7BB 563 4,000 X7R 0603 100 nF ±20% 10 CX 0603 MR X7R 6BB 104 4,000 X7R 0805 4.7 nF ±20% 100 CX 0805 MR X7R 0BB 472 4,000 X7R 0805 10 nF ±20% 100 CX 0805 MR X7R 0BB 103 4,000 X7R 0805 15 nF ±20% 50 / 63 CX 0805 MR X7R 9BB 153 4,000 X7R 0805 18 nF ±20% 50 / 63 CX 0805 MR X7R 9BB 183 4,000 X7R 0805 22 nF ±20% 25 CX 0805 MR X7R 8BB 223 4,000 X7R 0805 39 nF ±20% 25 CX 0805 MR X7R 8BB 393 4,000 X7R 0805 47 nF ±20% 16 CX 0805 MR X7R 7BB 473 4,000 X7R 0805 100 nF ±20% 16 CX 0805 MR X7R 7BB 104 4,000 X7R 0805 180 nF ±20% 10 CX 0805 MR X7R 6BB 184 4,000 X7R 1206 22 nF ±20% 100 CX 1206 MK X7R 0BB 223 2,500 X7R 1206 47 nF ±20% 50 / 63 CX 1206 MK X7R 9BB 473 2,500 X7R 1206 100 nF ±20% 50 / 63 CX 1206 MK X7R 9BB 104 2,500 X7R 1206 180 nF ±20% 25 CX 1206 MK X7R 8BB 184 2,500 X7R 1206 220 nF ±20% 16 CX 1206 MK X7R 7BB 224 2,500 X7R 1206 390 nF ±20% 16 CX 1206 MK X7R 7BB 394 2,500 X7R 1206 470 nF ±20% 10 CX 1206 MK X7R 6BB 474 2,500 X7R 1206 820 nF ±20% 10 CX 1206 MK X7R 6BB 824 2,500 X7R 1210 47 nF ±20% 100 CX 1210 MK X7R 0BB 473 2,500 X7R 1210 100 nF ±20% 50 / 63 CX 1210 MK X7R 9BB 104 2,500 X7R 1210 220 nF ±20% 50 / 63 CX 1210 MK X7R 9BB 224 2,500 X7R 1210 470 nF ±20% 25 CX 1210 MK X7R 8BB 474 2,500 X7R 1210 560 nF ±20% 25 CX 1210 MK X7R 8BB 564 2,500 X7R 1210 820 nF ±20% 16 CX 1210 MK X7R 7BB 824 2,500 X7R 1210 1 µF ±20% 16 CX 1210 MK X7R 7BB 105 2,500 X7R 1410 390 µF ±20% 50 CX 1410 MK X7R 9BB 394 2,500

Phycomp Product specification Surface-mount ceramic EMI filter capacitors X2Y® Series 2006 Nov.21 V.11 10 www.yageo.com Ordering code: Yageo part number Example: CX0805MRX7R8BB223 CX 0805 M R X7R 8 BB 223 Code 1 - 2 Series name CX = X2Y® series Code 7 Capacitance tolerance M = ±20% Code 9 - 11 Code 13 Code 15 - 17 TC Material Termination Capacitance value 0 = x 1 1 = x 10 2 = x 102 3 = x 103 4 = x 104 5 = x 105 6 = x 106 X7R NP0 B = Ni-Barrier Code 3 - 6 Size code Code 8 Packing style R = Paper tape reel ∅ 7 inch K = Embossed plastic tape reel ∅ 7 inch Code 12 Rated voltage 5 = 6.3 V 6 = 10 V 7 = 16 V 8 = 25 V 9 = 50 V 0 = 100 V Code 14 Process code B = X7R SCM045 (2 significant digits + number of zeros; the third digit signifies the multiplying factor, and letter R is decimal point) EIA mm 0603 (1608M) 0805 (2012M) 1206 (3216M) 1210 (3225M) 1410 (3625M) 1812 (4632M)

Phycomp Product specification Surface-mount ceramic EMI filter capacitors X2Y® Series 2006 Nov.21 V.11 11 www.yageo.com RECOMMENDED DIMENSIONS OF SOLDER LANDS Table 3 Reflow soldering Footprint dimensions (mm) CASE SIZE (EIA) A B C D E Placement Accuracy (mm) HBK085 Fig.3 Recommended dimensions of solder lands A DC BE

Phycomp Product specification Surface-mount ceramic EMI filter capacitors X2Y® Series 2006 Nov.21 V.11 12 www.yageo.com Fig.4 X2Y ® series through measurement

• X2Y® are soldered on a printed circuit board
• PCB: FR-4 substrate, with 50 Ω microstrip line
• Network Analyzer: Agilent E5071b
• Calibration: full 2-port calibration with 85033E kit A B19.2 0.8 0.8 SCM048 1.6 25.6 12.55 12.55 Ground plane Via 50 Ω microstrip line with CPW design method For other dimensions see Table 4 Table 4 Recommended dimensions of measurement CASE SIZE A (mm) B (mm) 0603 0.5 ±0.10 1.2 ±0.10 0805 0.8 ±0.10 1.6 ±0.10 1206 1.2 ±0.10 2.8 ±0.15 1210 2.1 ±0.15 2.8 ±0.15 1410 2.1 ±0.15 3.1 ±0.15 Fig.5 Testing board for measurement Size 0603: A=0.5 mm, B=1.2 mm MEASUREMENT SETUP SCM046 network analyzer A G1 G2 B

Phycomp Product specification Surface-mount ceramic EMI filter capacitors X2Y® Series 2006 Nov.21 V.11 13 www.yageo.com TESTS AND REQUIREMENTS Table 5 Test procedures and requirements TEST METHOD IEC60384-21/22 TEST PROCEDURE REQUIREMENTS 4.3 mounting The capacitors may be mounted on printed- circuit boards or ceramic substrates no visible damage 4.4 visual inspection and dimension check any applicable method using ×10 magnification in accordance with specification 4.5.1 capacitance NP0: f = 1 MHz for C ≤ 1 nF, measuring at voltage 1 Vrms at 20 °C; f = 1 KHz for C > 1 nF, measuring at voltage

1 Vrms at 20 °C

X5R/X7R/Y5V: f = 1 KHz for C ≤ 10 µF, measuring at voltage 1 Vrms at 20 °C within specified tolerance

4.5.2 Dissipation factor

(D.F.) NP0: f = 1 MHz for C ≤ 1 nF, measuring at voltage 1 Vrms at 20 °C; f = 1 KHz for C > 1 nF, measuring at voltage X5R/X7R/Y5V: f = 1 KHz for C ≤ 10 µF, measuring at voltage 1 Vrms at 20 °C in accordance with specifications 4.5.3 insulation resistance at Ur (DC) for 1 minute in accordance with specification 4.5.4.2 voltage proof Test voltage (DC) applied for 1 minute Ur ≤ 100 V: 2.5 × Ur applied to NP0/X5R/X7R/Y5V series 100 V < Ur ≤ 200 V: 1.5 × Ur + 100 V applied to NP0/X7R series 200 V < Ur ≤ 500 V: 1.3 × Ur + 100 V applied to NP0/X7R series Ur > 500 V: 1.3 × Ur applied to NP0/X7R series I: 7.5 mA no breakdown or flashover

Phycomp Product specification Surface-mount ceramic EMI filter capacitors X2Y® Series Table 5 Test procedures and requirements (continued) TEST METHOD IEC 60384-21/22 TEST PROCEDURE REQUIREMENTS 4.6 temperature characteristic Between minimum and maximum temperature NP0: ∆C/C: ±30 ppm/°C X5R/X7R: ∆C/C: ±15% 4.15 adhesion A force applied for 10 seconds to the line joining the terminations and in a plane parallel to the substrate for size ≥ 0603: a force of 5 N applied for size 0402: a force of 2.5 N applied for size 0201: a force of 1 N applied no visible damage Mounting in accordance with IEC 60384-22 paragraph 4.3 no visible damage 4.8 bond strength of plating on end face Conditions: bending 1 mm at a rate of 1 mm/s, radius jig 340 mm NP0: l∆C/Cl: ≤ 1% or 0.5 pF whichever is greater X5R/X7R/Y5V: l∆C/Cl: ≤ 10%

4.9 Resistance to

Precondition: 150 +0/−10 °C for 1 hour, then keep for 24 ±1 hours at room temperature Preheating: for size ≤ 1206: 120 to 150 °C for 1 minute Preheating: for size >1206: 100 to 120 °C for 1 minute and 170 to 200 °C for 1 minute Solder bath temperature: 260 ±5 °C Dipping time: 10 ±0.5 seconds Recovery time: 24 ±2 hours The termination shall be well tinned NP0: l∆C/Cl: ≤ 0.5% or 0.5 pF whichever is greater X5R/X7R: l∆C/Cl: ≤ 10% Y5V: l∆C/Cl: ≤ 20% D.F.: within initial specified value Rins: within initial specified value

4.10 Solderability Unmounted chips completely immersed in

a solder bath at 235 ±5 °C Dipping time: 2 ±0.5 seconds Depth of immersion: 10 mm The termination shall be well tinned 2006 Nov.21 V.11 14 www.yageo.com

Phycomp Product specification Surface-mount ceramic EMI filter capacitors X2Y® Series 2006 Nov.21 V.11 15 www.yageo.com Table 5 Test procedures and requirements (continued) TEST METHOD IEC 60384-21/22 TEST PROCEDURE REQUIREMENTS Preconditioning; 150 +0/−10 °C for 1 hour, then keep for 24 ±1 hours at room temperature 5 cycles with following detail: 30 minutes at lower category temperature; 30 minutes at upper category temperature

4.11 Rapid change

Recovery time 24 ±2 hours No visual damage NP0: l∆C/Cl: ≤ 1% or 1 pF whichever is greater X5R/X7R: l∆C/Cl: ≤ 15% Y5V: l∆C/Cl: ≤ 20% D.F.: within initial specified value Rins: within initial specified value

4.13 Damp heat,

Initial measurements; after 150 +0/−10 °C for 1 hour, then keep for 24 ±1 hours at room temperature Duration and conditions: 500 ±12 hours at 40 ±2 °C; 90 to 95% RH; Ur applied Final measurement: perform a heat treatment at 150 +0/−10 °C for 1 hour, final measurements shall be carried out 24 ±1 hours after recovery at room temperature without load NP0: l∆C/Cl: ≤ 2% or 1 pF whichever is greater X5R/X7R: l∆C/Cl: ≤ 20% Y5V: l∆C/Cl: ≤ 30% NP0/X5R/X7R/Y5V: D.F.: 2 × initial value max. NP0: Rins ≥ 2,500 MΩ or Rins × Cr ≥ 25 seconds, whichever is less X5R/X7R/Y5V: Rins ≥ 500 MΩ or Rins × Cr ≥ 25 seconds, whichever is less

4.14 Endurance Preconditioning;

Initial measurements; after 150 +0/−10 °C for 1 hour, then keep for 24 ±1 hours at room temperature Duration and conditions: 1,000 ±12 hours at upper category temperature with 1.5 × Ur voltage applied Final measurement: perform a heat treatment at 150 +0/−10 °C for 1 hour, final measurements shall be carried out 24 ±1 hours after recovery at room temperature without load NP0: l∆C/Cl: ≤ 2% or 1 pF whichever is greater X5R/X7R: l∆C/Cl: ≤ 20% Y5V: l∆C/Cl: ≤ 30% NP0/X5R/X7R/Y5V: D.F.: 2 × initial value max. NP0: Rins ≥ 4,000 MΩ or Rins × Cr ≥ 40 seconds, whichever is less X5R/X7R/Y5V: Rins ≥ 1,000 MΩ or Rins × Cr ≥ 50 seconds, whichever is less

Phycomp Product specification Surface-mount ceramic EMI filter capacitors X2Y® Series 2006 Nov.21 V.11 16 www.yageo.com

REVISION HISTORY

Rev.5 2001 Sep 25 - - Published on web Rev.6 2002 Jul 10 - - Product range extended in all materials and sizes; - Insertion loss measurements added. Rev.7 2003 Apr 02 - - Updated company logo Rev.8 2003 Jul 23 - - Cover page revised Rev.9 2003 Sep 09 - - Cover page corrected Rev.10 2004 Apr 21 - - Product range updated - NP0, Y5V and size 1812 removed. Rev.11 2006 Nov 21 - - Size 1410 extended - Product applications, features and benefits update - Measurement setup added - Updated tests and requirements