CTVP CT | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
Manufacturer of Passive Components 800-684-5322 Inside US 949-453-1811 Outside US Copyright © 2015 by CT Magnetics, DBA Central Technologies. All rights reserved. CT Magnetics reserves the right to make improvements or change specifications without notice REV 04.22.15 SMD Transformers www.ctparts.com CTVP Series SPECIFICATIONS Not Shown at Actual Size CHARACTERISTICS Description: SMD six winding transformers and inductors Applications (Transformer): flyback, feed forward, push-pull, multiple, etc. Applications (Inductor): buck, boost, coupled, choke, filter, differential, forward, common mode. Features: High efficiency, low profile and low radiation• Frequency range to over 1MHz• 500VAC isolation winding to winding• Can be used as Transformer or Inductor• Ferrite core material• Operating Temperature: -40°C to +85°C Storage Temperature: -55°C to +125°C Solder reflow temperature: +250°C for 10 seconds maximum Miscellaneous: RoHS Compliant. Samples available. See website for ordering information. Part Number (1)Inductance Nom. (µH) (2)Isat Typ. (A) (3)Leakage Inductance Typ. (µH) (4)DCR Max. (W) (5)Irms Typ. (A) CTVP14F-1611 160 ±30% 0.07 0.17 0.16 0.95 PAGE 1 OF 5
Manufacturer of Passive Components 800-684-5322 Inside US 949-453-1811 Outside US Copyright © 2015 by CT Magnetics, DBA Central Technologies. All rights reserved. CT Magnetics reserves the right to make improvements or change specifications without notice REV 04.22.15 www.ctparts.com SPECIFICATIONS SMD Transformers Part Number (1)Inductance Nom. (µH) (2)Isat Typ. (A) (3)Leakage Inductance Typ. (µH) (4)DCR Max. (W) (5)Irms Typ. (A) CTVP15F-1311 132 ±30% 0.07 0.13 0.14 0.97 CTVP20F-1711 173 ±30% 0.14 0.24 0.07 1.70 CTVP20F-1201 12 ±20% 1.96 0.24 0.07 1.70 NOTeS FROM TAbLeS 1. L(nom) = Nominal Inductance of a single winding. Peak current that will result in 30% saturation of the core. This current value 2. assumes that equal current flows in all six windings. CTVP11F and CTVP14F: Pins 4-1 with other pins shorted. 3. CTVP15F , CTVP17F and CTVP20F: Pins 1-12 with other pins shorted. Maximum DC Resistance of each winding.4. RMS current that results in a surface temperature of approximately 40°C 5. above ambient. The 40°C rise occurs when the specified current flows through each of the six windings. PAGE 2 OF 5
Manufacturer of Passive Components 800-684-5322 Inside US 949-453-1811 Outside US Copyright © 2015 by CT Magnetics, DBA Central Technologies. All rights reserved. CT Magnetics reserves the right to make improvements or change specifications without notice REV 04.22.15 www.ctparts.com PHySICAl dImENSIONS SMD Transformers CTVP11F Series (Unit: mm) CTVP14F Series (Unit: mm) 13.0Max. 13.0Max. 12 1 Top View 14.0 10.0 1.5 Suggested Pad Layout 6.5Max. 0.7±0.1 2.0±0.1 1 6 1:1:1:1:1:1±3% Schematic 16.8Max. 2.5±0.1 Top View 18.0 13.0 1.75 Suggested Pad Layout 7.8Max. 0.7±0.1 16.3Max. 1:1:1:1:1:1±3% Schematic PAGE 3 OF 5
Manufacturer of Passive Components 800-684-5322 Inside US 949-453-1811 Outside US Copyright © 2015 by CT Magnetics, DBA Central Technologies. All rights reserved. CT Magnetics reserves the right to make improvements or change specifications without notice REV 04.22.15 www.ctparts.com PHySICAl dImENSIONS SMD Transformers CTVP15F Series (Unit: mm) Schematic 1:1:1:1:1:1±3% 17.5Max. 127 16 2.5±0.1 23.5 17.0 2.5 1.5 Top View Suggested Pad Layout 8.5Max. 0.7±0.1 22.0Max. CTVP17F Series (Unit: mm) 18.0Max. 1 12 6 7 2.5±0.1 26.0 19.0 17.5 Top View Suggested Pad Layout 24.6Max. 0.7±0.1 10.0Max. Schematic 1:1:1:1:1:1±3% 1 6 PAGE 4 OF 5
Manufacturer of Passive Components 800-684-5322 Inside US 949-453-1811 Outside US Copyright © 2015 by CT Magnetics, DBA Central Technologies. All rights reserved. CT Magnetics reserves the right to make improvements or change specifications without notice REV 04.22.15 www.ctparts.com PHySICAl dImENSIONS CTVP20F Series (Unit: mm) Schematic 1:1:1:1:1:1±3% 3.0±0.1 22.0Max. Top View 31.0 22.0 2.25 Suggested Pad Layout 29.5 0.7±0.1 11.5Max.1 6 PAGE 5 OF 5