CTL05R015FJM AAC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
American Accurate Components, Inc. CURRENT SENSE RESISTORS The content of this specification may change without notification 06/08/07
188 Technology Drive, Unit H, Irvine, CA 92618
TEL: 949-453-9888 FAX: 949-453-8889 Custom solutions are available. CTL05/CTL16/CTL10/CTL18/CTL12/CTL01 Series Chip Resistor HOW TO ORDER CTL 10 R015 F J M Packaging M = 7” Reel (10” Reel for 2512) V = 13” Reel TCR (ppm/°C) J = + 75 K = + 100 L = + 200 N = + 350 P = + 500 Tolerance (%) EIA Resistance Code Three significant digits and # of zeros Size 05 = 0402 16 = 0603 10 = 0805 18 = 1206 12 = 2010 01 = 2512 Series Precision Current Sense Resistor DIMENSIONS (mm) Series Size L W c t
ELECTRICAL CHARACTERISTICS
Max TCR (ppm/°C) Size Rated Power Tol ±75ppm ±100ppm ±200ppm ±350ppm ±500ppm Max Working Voltage Max Overload Voltage 1% 0.100 ~ 0.680 2% 0.100 ~ 0.680 0603 .125W 5% 0.100 ~ 0.680 50V 100V 2% 0.022 ~ 0.080 0.01 ~ 0.039 0805 .250W 5% 0.022 ~ 0.080 0.022 ~ 0.068 150V 300V 1206 .50W 200V 400V .5% 2010 .75W 200V 400V 2512 1.0W 200V 400V NOTE: The temperature range is -55°C ~ +150°C R a t e d V o l t a g e = √P*R
FEATURES
Resistance as low as 0.001 ohms Ultra Precision type with high reliability, stability and quality RoHS Compliant Extremely Low TCR, as low as + 75 ppm Wrap Around Terminal for Flow Soldering Anti-Leaching Nickel Barrier Terminations ISO 9002 Quality Certified Applicable Specifications: EIA575, IEC 60115-1, JISC5201-1, CECC 40401, MIL-R-55342D SCHEMATIC
American Accurate Components, Inc. CURRENT SENSE RESISTORS The content of this specification may change without notification 06/08/07 TEL: 949-453-9888 FAX: 949-453-8889 CTL05/CTL16/CTL10/CTL18/CTL12/CTL01 Series Chip Resistor PERFORMANCE Maximum ∆ Ω Test Item F G, J Condition Short Time Overload ± 0.1% ± 0.5% 2.5 times of the rated voltage shall be applied for 5 seconds Load Life ± 0.25% ± 0.5% The resistor shall be subjected to rated voltage for 90 min. followed by a pause of 30 min. at a temperature of 70±3ºC. This constitutes 1 cycle. Cycles shall be repeated for 1000 hours. Moisture Load Life ± 0.25% ± 0.5% The resistor subjected to rated voltage for 90 min followed by a pause for 30 min at a temperature of 60±2ºC with relative humidity of 90% to 95%. This constitutes 1 cycles. Cycles shall be repeated for 1000 hours. Temperature Cycle ± 0.1% ± 0.5% [-55ºC 30 min → +125ºC 30 min → R.T. 3 min] The resistor shall be subjected to 5 continuous cycles Resistance to Solder Heat ± 0.1% ± 0.5% The resistor shall withstand di pped into solder for 10±1 sec. At 260±5ºC Terminal Strength ± 0.1% ± 0.5% Distance between fulcrums: 90mm; Bending width: 3 mm Insulation Resistance DC 500V for 1 min. 1000 Meg Ω or over Solderability A new uniform coating of solder shall cover minimum of 95% of surface being immersed The resistor shall be dipped into the solder of 215±5ºC for 3±0.5 seconds PACKAGE QUANTITY M 10,000 5,000 5,000 5,000 5,000 5,000 2,000 TAPE SCHEMATIC REEL SCHEMATIC TAPE DIMENSIONS (mm) A B W E F P1 T T p REEL DIMENSIONS (mm) Reel M H C G E F 10” 13” * The suffix “L” indicates that this item is lead free. As of September 2004, all new production items of this are lead free and in compliance with Lead Free/RoHS. LABEL DESCRIPTION One side surface of a reel is marked with a label with the following items of information. 1. Chip Resistor 2. Part Number 3. Tolerance 4. Quantity 5. Lot # for production month/year/suffix L* 6. Manufacturer’s name or symbol