CTH7F CT | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
Power Line Chokes - Axial ctparts.com Manufacturer of Passive and Discrete Semiconductor Components 800-684-5322 Inside US 949-453-1811 Outside US Copyright © 2008 by CT Magnetics, DBA Central Technologies. All rights reserved. CT Magnetics reserves the right to make improvements or change specifications without noticeCENTRAL Technologies 04.14.08 Size A B C 20 AWG Max. Max. Nom. mm 15.3 7.37 see 0.813 inches 0.6 0.29 below 0.319 PHYSICAL DIMENSIONS A * 0.940“±0.060” (Tape & Reel) B
20 AWG
L Test SRF DCR Saturation Rated Part Inductance Freq. Min. Max. DC AC Number (µH) (kHz) (MHz) ( ΩΩ) (A) (A) CTH7F-100K 10 1.0 17 .03 4.1 1.3 CTH7F-120K 12 1.0 16 .04 3.6 1.3 CTH7F-150K 15 1.0 12 .04 3.3 1.3 CTH7F-180K 18 1.0 11 .04 3.0 1.3 CTH7F-220K 22 1.0 10 .05 2.7 1.3 CTH7F-562K 5600 1.0 .60 14 .16 .08 CTH7F-682K 6800 1.0 .40 16 .15 .08 CTH7F-822K 8200 1.0 .35 21 .13 .07 CTH7F-103K 10000 1.0 .30 26 .12 .05 CTH7F-123K 12000 1.0 .25 30 .11 .05 CTH7F-153K 15000 1.0 .23 43 .10 .04 CTH7F-183K 18000 1.0 .22 48 .09 .04 CTH7F Series From 3.9 µH to 18,000 µH Not shown at actual size. CHARACTERISTICS Description: Axial leaded power line inductor (UL sleeved) Applications: Used in switching regulators, power amplifiers, power supplies, SCR and Triac controls, speaker crossover networks, RFI suppression and filters. Various applications Operating Temperature: -55°C to +125°C Inductance Tolerance: ±10% Testing: Inductance is tested on an HP4284A at 1.0 kHz Packaging: Tape & Reel standard, bulk packaging available. Marking: Coils are sleeved in heat resistant polyolefin and labeled with the part number Miscellaneous: RoHS Compliant. Higher current parts available. Saturation Current: Lowers inductance by 10% Bobbin: High saturation, allows for high inductance with low DC resistance Additional Information: Additional electrical & physical information available upon request Samples available. See website for ordering information. ENGINEERING KIT #2 RoHS Compliant SPECIFICATIONS Part numbers indicate tolerance available.. K = ±10%