DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
Ordering Information: Specifications subject to change without notice. Copyright © 2007-2011 Extech Instruments Corporation. All rights reserved including the right of reproduction in whole or in pa rt in any form.www.extech.com 2/24/11 - R1 Features:
- A bright flashing LED and loud pulsating beeper indicate local continuity
- Remote continuity – with the use of the remote probe, it does not tie-up two people when identifying and labeling long distance wire/cable runs
- Flashing remote probe - Two lead, bi-color (red/green) LED probe allows a single user to identify up to three wires or cables at a time for correct labeling with only one trip to the other end location - cuts down on multiple trips back and forth
- Polarity verification - Drives a 20mA DC current pulse through the wires or cables under test to the bi-color remote probe; This enables the technician to identify each of the wires under test at the other end of the cable run and eliminates the possibility of false high impedance readings
- Lightweight/Pocketsize - clips on and hangs from the cable(s) under test without falling off
- Dims: 3.6x2.2x1.14" (90x57x29mm); Wt: 9.2oz (260g)
- Complete with remote probe, test leads with alligator clips, 9V battery and pouch One person operation For wire and cable testing; both local and remote Continuity Tester Pro Use for local continuity or for remote wiring identification. RED LED means wiring is reversed. GREEN LED means wiring is properly identified. Continuity Tester includes Remote probe with bi-color LED for wire identification highlight Patented